A Fix It Sticks Ratchet T-Handle w/Locking Hex Drive and an All-In-One Torque limiter are also included. The Ratchet T-Handle w/Locking Hex Drive works with any quarter inch hex bit, but also allows the use of tools that require a pulling motion such as the new and pull-through bore cleaner bit. The All-In-One Torque Driver is perfect for correctly torquing action screws and properly mounting optics, and other parts and accessories.

The Rifle Hunter’s Toolkit includes the following comprehensive tool selection:

• All-in-One Torque Driver (15-65 in-lbs)
• Ratchet T-Handle w/Locking Hex Drive
• 15 commonly needed 1/4″ hex bits:
  • T10, T15, T20, T25, [Hex 3/32”, 5/64”, 1/8”, 5/32”, 3/16”, 2.5mm, 3mm, 4mm, 5mm, P1, Slotted 5mm
• 1/2” socket and 1/4” bit adapter set
• Pull-Through Bore Cleaner Bit
• Hoppe’s® Boresnake® (AR-15, .22 -.223) or (.30 – .308)
• Two-side, zippered case with molded accessory holder and side cleaning pocket made with oil & dirt resistant material

The zippered soft carrying case features two separate compartments, one for the molded-in wrench and bit holder that designed to hold any bit / accessory with a standard 1/4″, and  separate compartment for the Boresnake and the pull-through bore cleaner bit.

The Rifle Hunter’s Toolkit is now available with an MSRP of $190.00.

“The DarkVault 2.0 is purpose-built for smartphone use in austere environments,” says Andrew Frazier, CEO at Thyrm. “Attach the DarkVault 2.0 to plate carriers or chest rigs and you can quickly dock and use your phone for navigation, ballistics info, ad-hoc mesh comms, or any other use.”

The DarkVault 2.0 is available in two sizes, one for regular size phones and one for Max/Plus size phones, both in slim cases. It features an integrated phone clamp, a MOLLE/PALS attachment system with full mechanical interlocks, and a stable viewing platform.

Key features of the DarkVault 2.0:

• Fully enclosed smartphone protection
• Waterproof, dustproof Poron® sealing gasket
• Integrated phone clamp
• MOLLE/PALS attachment system with full mechanical interlocks
• Lockable case latch and attachment latch
• Regular and Large sizes for most 6.1″ and 6.5″ phones in slim cases
• Comms Version Only: Adhesive overlay can be removed to allow for camera use
• Blocking Version Only: Proprietary polymer construction reduces signal transmission by 110dB
• Custom-cut adhesive Velcro loop attachment available for ID/patch/accessory attachment
• Designed and Made in the USA

The DarkVault 2.0 is available for purchase now on Thyrm.com starting at $89.99.

Based on a revolutionary new digital Vertical-Cavity, Surface Emitting Laser (VCSEL) diode core, the MILR supports the widest range of platforms and applications that allows for a singular, lightweight, and comprehensive solution for advanced ranging, aiming, illuminating, and ballistic solutions. Optimized for machinegun use and fully feature capable for precision rifles as well as remote weapon stations, the MILR is the only device that enables full day and night ballistic capability from a weapons platform without the use of a clip-on night vision device.

Capability Development

To ensure a decisive advantage during night operations and increase survivability and lethality of the operator, a novel approach to range finding, infrared illumination, and targeting via a new fire control system was proposed by B.E. Meyers & Co.  The MILR Miniature Intelligent Laser Rangefinder is a Class 3B/3R combination high-power infrared aiming and illumination device with visible pointer, as well as range-finding ballistic computer (via the Applied Ballistics integrated software) that can both provide holds on-screen for use with a day-optic or actively declinate the disturbed infrared aiming laser for ballistic compensation when using head-borne night vision devices.

A new laser-based variable divergence illuminator provides ideal beam clarity over an extended application range while also decreasing response times in near and mid-range engagements. The system is designed for combat environmental criteria to include immersion, recoil, and thermal shock, while maintaining position stability and system functionality.

Technology and Design

The technology and functionality behind the MILR have been in development for the last several years and support a design concept which allows for complete digital manipulation of all key system controls, to include power, divergence, VIS/IR, ranging, mode/function, and more.  As the power and divergence controls on the MILR are completely digital there is no optical or mechanical movement within the system apart from azimuth and elevation boresight controls. Divergence and power are synchronized for best pointing and illumination effect and are continually and instantly at the operator’s discretion through the onboard control configurations.

The design and functionality of MILR is based on its ability to achieve digital laser movement within the system, specifically the infrared pointer, which internally declinates to create a ballistic solution for the shooter while under NVGs. The introduction of this first Disturbed Infrared Aiming Laser (DIAL) capability allows for true day-to-night extended-range overmatch for weapons platforms traditionally limited in effectiveness during night engagements. Additionally, the MILR uses a step-through ballistic setup interface that provides ballistic computer capability to user groups not previously trained to use a ballistic solver data, while retaining compatibility for traditional long-form profile setups.

Platforms and Applications

The versatility and ruggedness of the MILR design lends itself for use on most individual weapon systems, precision rifle platforms, crew-served weapon systems, and remote weapon stations as well as other integrated solutions. Additionally, MILR seamlessly communicates with Kestrel Instruments wind and weather meters for expeditious host-weapon data download. Our Disturbed Infrared Aiming Laser (DIAL) technology is collaboratively partnered with Applied Ballistics, Bluetooth, and Unity Tactical, providing a revolutionary technical concept in a rugged, ergonomic, lightweight, and combat-capable device.

Features and Specifications

By orchestrating these best-in-class features and combining them with our next generation VCSEL core, the technological versatility inherent in MILR allows for an exceptionally enhanced multi-platform visible/infrared aiming and illumination laser solution.  The MILR series of laser rangefinders truly create a new category of fire control systems, and like all B.E. Meyers & Co. products, are proudly Made in the USA. 
Interim specifications can be found here: bemeyers.com/MILR

Options and Availability

The MILR series of laser systems will be available in either green or red visible wavelengths, and color options of black and flat dark earth, as well as custom configurations for certain orders. MILR is scheduled for multi-market product

Capability Development

To ensure a decisive advantage during night operations and increase survivability and lethality of the operator, a new weapon mounted laser pointer and illuminator system was proposed by B.E. Meyers & Co. The DAGIR series combines the advantages of minimal size and weight while improving performance, reliability, and operability. A new laser-based variable divergence illuminator provides ideal beam clarity over an extended application range while also decreasing response times in near and mid-range engagements. The system is designed for combat environmental criteria to include immersion, recoil, and thermal shock, while maintaining position stability and system functionality.

The DAGIR is intended for everything from close-range carbine use to high-power extended-range machine gun applications, as well as integration with remote weapon stations and other platforms.

Technology and Design

The technology and functionality behind the DAGIR have been in development for the last several years and support a design concept which allows for complete digital manipulation of all key system controls, to include power, divergence, VIS/IR, mode/function, and more. As the power and divergence controls on the DAGIR are completely digital, there is no optical or mechanical movement within the system apart from azimuth and elevation boresight controls. Divergence and power are synchronized for best pointing and illumination effect and are continually and instantly at the operator’s discretion through the onboard control configurations.

The design of the DAGIR, specifically form factor, ergonomics, and functionality, is based on end-user feedback from across the spectrum of military, law enforcement, and recreational shooters which started with our introduction of MAWL®, currently with over 25,000 systems in use worldwide. DAGIR seeks to incorporate the most sought-after design aspects of all modern laser systems on the market and advances them.

Platforms and Applications

The versatility and ruggedness of the DAGIR design lends itself for use on individual weapon systems, precision rifles, crew-served weapon systems, and remote weapon stations as well as other platforms. DAGIR is capable of operating in training mode, or selectable power levels. Through our collaborative partnership with Unity Tactical that allows for the incorporation of their various remote activation cables by way of our patented Wakizashi communications port, we ensure a myriad of control configurations and placement options.

Features and Specifications

By orchestrating these best-in-class features and combining them with our next generation VCSEL core, the technological versatility inherent in DAGIR allows for an exceptionally enhanced multi-platform visible and infrared aiming and illumination laser solution. This is not just a broadening of specifications, but by questioning the status quo, the DAGIR exhibits a truly extraordinary pivot in combat laser system design. The DAGIR series of lasers, like all B.E. Meyers & Co. products, are proudly Made in the USA. Interim specifications can be found here: bemeyers.com/DAGIR

Options and Availability

The DAGIR series of laser systems will be available in either green or red visible wavelength options, and color options of black and flat dark earth, as well as custom configurations for certain orders. DAGIR is scheduled for multi-market production release in 2025 via select B.E. Meyers & Co., Inc. registered resellers in the US and internationally. Market competitive pricing and additional details will be an

With its unique spring-loaded clamp design and integrated magnets, the BearTrap 360 can be attached to any flat, round or irregular surface to shine a bright spot or flood light on work areas both small and large. A wire handle with a rubber sleeve provides an easy grip when opening the light’s clamping mechanism.

“The new functionality of the BearTrap 360 now gives first responders, automotive and industrial technicians, outdoor enthusiasts, and other users the ability to easily spin the body of the light horizontally in addition to moving it vertically, for any angle view,” said Michael F. Dineen, Streamight’s Chief Revenue Officer. “This is a very useful feature when performing tasks that require angling a spot light as work progresses on a car engine, or continuously moving a flood light when investigating a fire or accident scene.”

The BearTrap 360 provides six output modes, including three spot and three flood settings. The flood mode covers work areas or other surfaces with soft, bright light, ranging from 2,000 lumens on high with a 2.5-hour run time to 575 lumens on low, with an 8.75-hour run time. The light’s spot mode provides a white concentrated beam to pinpoint specific work areas, ranging from 1,000 lumens on high for 4.5 hours to 325 lumens on low for 12.5 hours. 

The BearTrap 360 uses an easy access, push-button on/off switch with a battery life indicator that turns red when the battery has reached the end of its usable life. The new light uses a 7.26-volt, 5200 mAh lithium-ion battery that can be recharged in 5.5 hours. The BearTrap 360 will also run continuously if plugged into an AC power supply.

Manufactured from tough thermoplastic construction, it also features a gasket-sealed lens that is impervious to most common automotive or industrial chemicals. It has an IPX4-rated design for water-resistant operation and is impact resistance tested to 1 meter.

Weighing 2 lbs., 5 ounces, the light measures 7.62 inches in length, 6.5 inches in width, and is 3.12 inches thick. The new BearTrap 360 has an MSRP ranging from $269.66 to $286.52 and comes with Streamlight’s Limited Lifetime Warranty.

Civilian Classes:

Military/LE Classes:

Go to training.hk-usa.com  to review and register for the classes.

Morphy Auctions officially became a multinational company today as founder and president Dan Morphy announced the launch of a European division based in Zwingen, Switzerland.

“Having a permanent presence in Europe means we can now offer collectors there a convenient and economical way in which to consign valuables to our major sales in Pennsylvania and Las Vegas,” Morphy said.

To ensure the intercontinental operation runs professionally and without any delays due to time-zone differences, Morphy’s has partnered with the respected Swiss firm CBR Trading AG, d.b.a. Munitionsdepot.ch (hereafter Munitions Depot). Consignors may now access a streamlined service that includes pickup anywhere on the Continent or in the U.K., safe storage of goods in Zwingen, and prompt shipment to the USA. Confirmed initial consignments include antique firearms and militaria; antique toys, fine and decorative art, jewelry, and other high-quality antiques.

“We’ve had a strong involvement with European collectors for many years, especially those who collect antique firearms and militaria,” Dan Morphy said. “We’ve often been asked if there were a way to consign firearms to Morphy’s that didn’t involve tedious government paperwork or international shipping hassles. We knew that in order to set up a seamless, consignor-friendly system, we would need the right partner – a business with unquestionable integrity, a secure facility, and a thorough understanding of the documentation and legalities involved in handling firearms. We found that partner in Munitions Depot.”

Led by CEO Christoph Borer, Munitions Depot is a premier retailer of modern and contemporary weaponry, sporting arms and ammunition. The Swiss firm’s venue is already set up specifically for firearms storage, with state-of-the-art security, locking display cases and a sizable vault. They have vast experience in the legal exportation of weapons to authorized dealers in other countries.

Christoph Borer remarked: “Being part of such a great alliance with a company as renowned as Morphy Auctions is an honor. We invite European collectors to visit us in Zwingen or view our website, www.munitionsdepot.ch. We can’t wait to get started on the first exciting project.”

Munitions Depot will pick up collections anywhere in Europe and, in the case of firearms, handle the packing and paperwork required for shipment to Morphy’s government-authorized arms importer in the USA. Militaria (medals, uniforms, etc.), other types of antiques, artwork or jewelry are shipped direct to Morphy’s Pennsylvania gallery. Firearms may be previewed at the Zwingen gallery approximately one month prior to auction.

Dan Morphy noted: “Some firearms, like WWI and WWII European arms, sell for 2-3 times as much here as they do overseas. The biggest collectors of early German, French and Austrian militaria are also here in the States. The US market is hungry for it. The same applies to many types of antiques and luxury items. Amphora pottery, Rolex watches, and high-end German and French toys and trains often achieve higher prices in the States.”

Morphy’s plans to conduct two auctions per year in Zwingen, starting in fall 2024. Those sales will feature American consignors’ property that, in the opinion of Morphy’s specialists, would fare better in Europe.

Morphy Auctions staff will be at major firearms shows across Europe this year, including the March 22-24 Weapons Sammlerborse in Luzern, Switzerland, to meet with potential consignors and those wanting information about Morphy’s referral program, which pays generous fees for introductions leading to auction consignments. Contact Dan Morphy: +1 877-968-8880; info@morphyauctions.com.

The three-day auction will take place Friday, Feb. 16, and run through Sunday, Feb. 18 at RIAC’s new, state-of-the-art 90,000-square-foot facility in Bedford, Texas. RIAC will host a full-day preview on Thursday, Feb. 15 beginning at 9 a.m., where guests can examine classic long guns and pistols, terrific sporting arms, modern firearms and an interesting lineup of Class III items.  

The auction will feature the finest firearms across multiple genres and time periods including but not limited to:  

• Historic guns from the Civil War, including a Brown Bess flintlock musket, a three-digit early production Henry rifle and a Civil War-issued Henry 
• Great handguns with interesting origins like Colt’s Model 1860 Army, the Ace pistol, and Smith & Wesson’s Pre-Model 29 and Performance Center Model 500 
• Lever action and historic Winchester models such as the Model 1866, 1895 and the legendary 1873 
• World War II guns including unique weapons from Austria’s Steyr, a U.S. Johnson Model 1941 semi-automatic rifle and a U.S.-marked Model 97 trench shotgun 
• Class III firearms including World War II submachine guns like a U.S. Guide Lamp M3, a reproduction Mark II STEN and a Thompson submachine gun 
• Sporting arms for hunters including deer rifles, skeet guns and waterfowl shotguns 

“To kick off 2024, we wanted to ensure our first auction delivered an outstanding lineup and we were able to deliver that with over 5,000 items slated for auction come February,” said Rock Island Auction Company President Kevin Hogan. “Those who have visited us in Illinois know our hospitality is second to none and we strive to provide that same experience for the welcoming community in Texas. In a state with such a rich firearms culture, we made sure our auction will feature impressive collections of historic and rare firearms that locals and visitors alike won’t want to miss.” 

Located at 3600 E. Harwood Road, Bedford, TX, RIAC’s newest headquarters offers auction visitors a firearms showroom, auction hall, vault and thousands of historic and rare firearms of numerous genres which guests can examine and inspect in-person.  

“MYSTERY RANCH packs have earned a global reputation within the most demanding communities by building load-bearing equipment that delivers in the harshest environments. Their ethos, passion and people not only align with the YETI team, but also connect well with our commitment to innovation and our customers.” said Matt Reintjes, President & CEO at YETI. “Their communities, ambassadors and obsession with quality make it a natural fit with YETI.”

Founded in 2006, the original YETI cooler was born out of frustration and passion. YETI has since grown into an industry innovator of premium outdoor gear designed for the hardcore outdoor adventurer, outside enthusiast and everyone in between. Like YETI, MYSTERY RANCH products have been built with durability and performance in mind for over two decades whether for use on the fire line, backcountry or in your everyday adventure.

“YETI’s passion for innovation and the outdoors aligns closely with our founding vision,” said Dana Gleason, Co-Founder of MYSTERY RANCH. “Renée Sippel-Baker, my co-founder, and I know they are a perfect partner to build upon our long history of making the best load-bearing equipment in the world for the most extreme users as well as the everyday mission.”

MYSTERY RANCH and the team will continue to operate out of Bozeman and will work with YETI over the next several months to integrate teams and functions.

For more information about YETI or MYSTERY RANCH, visit yeti.com. or mysteryranch.com.

Similar in appearance and manual-of-arms to an AR pattern rifle or pistol, Aero Survival Rifles and Pistols are original designs engineered to be lighter and more compact than similar AR based designs. A flat top configuration with a receiver-length Picatinny rail accommodates AR style optics and mounts. The 1911 ASR is blowback operated for simplicity and reliability. The barrel is 16.5” long and is threaded .578X28TPI. Both the upper and lower receivers are machined from 6061-T6 aluminum and available in black, OD green and tan.
The 1911 ASR uses TNW Firearms new patent-pending multi-cartridge bolt face design. This uses an extractor and cartridge support that can slide in or out perpendicular to the bore axis to accommodate different pistol cartridges. It also does away with the need for a semi enclosed bolt face, increasing feeding reliability and extraction and ejection. It also makes changing the lower and cartridge selection much easier because the user will not need a different bolt or bolt face.

Watch this video for an in-depth walk through
Available in January 2024, with an MSRP of $799, the new 1911 ASR gives 1911 shooters a portable, easy to handle, takedown, semi-automatic firearm that is truly a lightweight backpacking, survival, self-defense or emergency carbine or pistol. It ships from the factory with one 1911 magazine.

SEE IT AT THE 2024 SHOT SHOW IN BOOTH 41243

SPECS:

• Cartridge: .45ACP
• Overall Length – Stock extended: 33”
• Overall Length – Stock collapsed: 29.75”
• Weight: 5lbs 8oz
• Barrel Length: 16.5”
• Muzzle Threads: .578X28TPI
• Color: Black, OD Green or Tan
• Sights: None, flat top Picatinny Rail