Barrett Announces New M107A1 Rifle

Barrett, a company internationally known for providing high-end firearms, optics, and training, introduces to the commercial market the next generation of the U.S. Army’s M107 rifle-the Barrett M107A1. At four pounds lighter, the M107A1 offers all the performance of its predecessor and is now suppressor-ready from the factory. This rifle is built on decades of success with the Barrett Model 82A1/M107 rifle and feedback from users operating these systems on the battlefield around the world. Initial visible differences of the M107A1 include the flat dark earth, ultra-hard PVD coating that increases protection from the elements and decreases the need for lubrication. Also distinctive is the round muzzle brake that is designed to interface with Barrett’s new .50 BMG suppressor which reduces firing signature. There is also a thermal-guard cheek piece that has been added to increase the user’s comfort during extreme heat or cold. An all new aluminum upper receiver and select titanium components contribute to the M107A1’s lighter weight. A new advanced bolt carrier group and recoil system has been designed to handle the dynamics of firing the M107A1 with suppressor attached. A four-port muzzle brake accepts the new quick-attach Barrett .50 BMG suppressor. For more information please contact Barrett Firearms Manufacturing, Inc., Dept. SAR, P.O. Box 1077, Murfreesboro, TN 37133. Phone: (615) 896-2938. Fax: (615) 896-7313. Website: www.barrett.net.

Kruger Unveils Gen II Dual Tactical Sight

Kruger Optical has just unveiled its new Dual Tactical Sight (DTS) Gen II. The patent-pending dual-function sight created a stir when the Gen I prototype was introduced at the 2010 SHOT Show. Since then, Kruger’s engineers have been busy refining and perfecting the scope in response to market and end-user feedback. The resulting Gen II product is shorter, lighter and stronger, with improved functionality. Designed for complex engagement situations, the DTS incorporates two separate sighting systems into a single scope. The scope has two modes: a high-resolution 1x reflex sight with red-dot reticle for close quarter engagement, plus a 2-8×40 long-range zoom sight with Mil-dot reticle for long-range sighting. The product includes two separate aiming systems, each viewed through the same sight window. The user can switch between modes with the flip of a lever, with no head movement and without looking away from the target. The product has been designed for the extreme demands of the tactical professional who requires one optical sighting device that can be used for close or long range target engagement. The Gen II version incorporates several significant improvements over the original GEN I model. It features a unique, ultra-strong carbon fiber molded body, which is shorter, lighter and more durable than the GEN I version. It also has unlimited eye relief in reflex mode, with a large viewing window for extremely fast target acquisition. Unlike other dual-function systems on the market, the DTS does not require any bullet-drop calculations when changing modes, thus saving time and preventing errors. The sight features a patent-pending, extended range elevation system for linelong-range impact adjustments, with resettable clicks and a Geneva-style revolution counter. The scope’s rectangular shape and square viewing window are also key to the product’s performance. The square shape allows for an extremely wide field of view and large viewing window, making it easier to acquire and maintain a target. A zoom lever makes magnification adjustments quick and easy. All controls on the product are ergonomically designed to be user-friendly and easily adjusted without breaking line of sight. The scope’s illumination system features six brightness levels for varying light conditions. Each brightness setting alternates with an “off” setting, so the user can turn the scope off and then immediately return to the previous setting. Other features include: locking 1/4 windage and elevation adjustments with “unlocked” indicator, mil-dot reticle calibrated at 8x, Picatinny accessory rail attachment and an integrated mount system. The new scope is shockproof, waterproof, fog-proof and weights just 30 ounces. For more information on this revolutionary new scope please contact Kruger Optical, Inc., Dept. SAR, 251 West Barclay Drive, P.O. 532, Sisters, OR 97759. Phone: (888) 526-7779. Fax: (541) 549-0769. Their website is www.krugeroptical.com.

New Night Vision Goggle From ATN

American Technologies Network, makers of military, law enforcement, security and outdoor night vision and thermal applications, is proud to announce the ATN Night Cougar XT; a lightweight dual eye/tube Goggles System that is comfortable to wear and easy to use. Powered by two high-quality 1st Gen+ Light Intensifier Tubes and using fast precision optics, the ATN Night Cougar Night Vision Goggle has one of the clearest and brightest images available in a 1st Gen. Goggle System. Combine all of the above with a built-in Infrared Illuminator that lets you see in total darkness and you will be on your way to exploring even the darkest of places from your backyard to any exotic location for wildlife viewing or for personal security. Other features include hands-free usage via comfortable easy-to-use flip-up headgear, digital controls, multi-coated all glass optics with Proshield Lens Coating. The new goggles are water and fog resistant and retail for just $569. For more information on the new Cougar XT goggles please contact American Technologies Network, Corp., Dept. SAR, 1341 San Mateo Avenue, San Francisco, CA 94080. Phone: (650) 989-5100. Fax: (650) 875-0129. Website: www.atncorp.com.

ISSC-Austria And Gemtch Co-Partner

ISSC-Austria, exclusive importer and distributor of the M22 range pistol and MK22 range rifle, has partnered with Gemtech, the leader in high- performance suppressors, to offer products that fit and function seamlessly together. The ISSC-Austria M22 pistol with the new threaded barrel and the Gemtech Alpine suppressor offer target shooters the most efficient baffle design for a .22 LR suppressor while maintaining ease of disassembly (only tool needed is a U.S. coin, such as a nickel). Built using the combination of a Lothar Walther match barrel, adjustable sights and a very crisp 4-lb. single-action trigger, the M22 with the threaded barrel for the addition of accessories, such as the Gemtech Alpine, is the new standard in training pistols. MSRP starts at $389.95 for the M22 pistol and $425 for the Gemtech Alpine suppressor.

New for 2011 from Gemtech is the Tactical Retention Lanyard (TRL) in the new multi-cam color featuring a built-in, fail-safe breakaway for safe, non-mechanical retention and recovery of dropped pistols and other gear. MSRP for the Gemtech TRL is $23.

The just released ISSC-Austria MSR MK22 rifle pairs perfectly with Gemtech’s G5-22 suppressor designed from the ground up for .22 LR full-sized assault and MSR-style rifles. The MK22, designed and built in Austria, incorporates the look and feel of a military-style rifle with all the modern elements of a modern sporting rifle platform. This all-metal rifle gives the target shooter a “centerfire” feel even though it is chambered for the economical .22 LR cartridge. Using Gemtech’s patented Quickmount system, the G5-22 has all the same features of the 5.56mm G5 but made for the .22 LR cartridge. The G5-22 was further designed for superb group size and zero first round pop. MSRP on the ISSC MSR MK22 rifle is $569.95 and the Gemtech G5-22 suppressor is $495. Watch for an upcoming issue of SAR for an in-depth article on the ISSC MK22 rifle. For more information you can contact ISSC, LLC, Dept. SAR, 91 West Main Street, Ware, MA 01082. Phone: (800) 967-3940. Fax: (413) 967-7025. Website: www.issc-austria.com. Gemtech, Dept. SAR, P.O. Box 140618, Boise, ID 83714. Phone: (208) 939-7222. Website: www.gem-tech.com.

Kel-Tec Introduces New Bullpup Shotgun

Kel-Tec has just announced the introduction of its new bullpup style shotgun called the KSG. This previously rumored shotgun is now a reality. The KSG is their first entry into the shotgun market. The size, shape and design are similar to the currently available Kel-Tec RFB rifle, but the KSG ejects downward, instead of forward. The KSG weighs 6.9 pounds and is as compact as legally possible with a 26.1 inch overall length and an 18.5 inch cylinder bore barrel. Even with this compact size, the internal dual tube magazines hold an impressive 15 rounds of 12 gauge 2-3/4 inch rounds (7 per tube and 1 in the chamber). The simple and reliable pump action feeds from either the left or right tube. The feed side is manually selected by a lever located just behind the trigger guard. The lever can be positioned in the center detent in order to easily clear the chamber without feeding another round from either magazine or to load single specialty rounds. A cross bolt style safety blocks the sear, and the pump release lever is located in front of the trigger guard. The pump includes an under Picatinny rail for the mounting of a forward grip, light or laser. The included top Picatinny sight rail will accept many types of optics or iron sights. Forward and rear sling loops are built in, and a basic sling is included. The soft rubber butt pad helps to tame recoil. Retail price has not been set as of this writing but is said to be in the $800 range. For more information you can contact them at Kel-Tec CNC Industries, Inc., Dept. SAR, 1475 Cox Road, Cocoa, FL 32926. Phone: (321) 631-0068. Fax: (321) 631-1169. Their website is www.keltecweapons.com.

Ordnance.Com Restoration Specialists

Ordnance.Com is dedicated to preserving the past to educate the future. Specializing in artillery and ordnance, they can restore your historical items to museum quality. Their restorations include Howitzers, AA guns, AT guns, recoilless rifles and mortars. They also restore ordnance and support items from 20mm to 16 inch, carts, support equipment, vehicles and underwater warfare ordnance. Ordnance restoration is carried out by using techniques and procedures taken from their vast reference collection of ordnance renovation manuals. Original techniques and tooling is applied as available or reproduction components are made as needed. Correct color, font and placement is ensured using rolling, stenciling or painting and is applied as the original would have that create a look of authenticity that is striking. They also have available a very good selection of modern ordnance, RPGs, Stingers, folding fin aerial rockets, chemical rockets, mortars, and most modern tank related ordnance. Located in Paris, Tennessee, they may be contacted at (713) 407-4510. Email info@ordnance.com. Website: www.ordnance.com.

SIG Sauer Introduces New SIG 556 Classic Rifle

SIG Sauer, Inc., a leading manufacturer of commercial, law enforcement, and military firearms, is proud to introduce the next generation in the evolution of the SIG 556 platform with the new SIG 556 Classic model. The legendary performance and accuracy of the Swiss-built SG 550 tactical rifle is found in every SIG 556 and further enhanced in the new SIG 556 Classic. The Classic is a semiautomatic rifle with the silhouette that harkens back to the original military-only 550 model. Featuring a full length gas piston operating system with a two-position gas valve, the rifle will keep operating even when the environmental conditions deteriorate. Available in 5.56 NATO, the Classic features a Swiss-type folding stock that adjusts to length, as well as a Swiss-type polymer ergonomic forend. The SIG 556 Classic’s steel receiver features a Picatinny rail with a SIG Sauer Mini Red Dot Sight and an improved combat style hooded front and flip-up rear sights. The Classic’s sleek profile and compact length is enhanced by a 17-inch cold hammer forged barrel. SIG Sauer shaved a pound off the Classic model by incorporating the redesigned alloy trigger housing, AR style magazine and flash suppressor. Two 30-round polymer magazines with connector are included. The SIG 556 Classic brings back the look and feel of one of the world’s most sought after military rifles but on a platform available for law enforcement and responsible citizens. MSRP is $1,998. For more information please contact them at SIG Sauer, Dept. SAR, 18 Industrial Drive, Exeter, NH 03833. Phone: (603) 772-2302. Fax: (603) 772-9082. Visit their website: www.sigsauer.com.

ATN Announces New Thermal Imager

American Technologies Network Corp. (ATN) proudly introduces the latest in thermal imaging technology with the OTIS-14 Thermal Imaging device. OTIS stands for Optical Thermal Imaging System – System being the key word. The ATN OTIS-14 is a multi-mission capable monocular designed for optimum use by military operators, law enforcement personnel, private contractors and security conscience civilians desiring to convert the darkness into a tactical advantage. The ATN OTIS-14 offers maximum versatility being capable of handheld, head/helmet mounted, as well as, weapon mounted use. The ATN OTIS-14 bears many hallmark ATN features such ergonomic design, simple to operate controls, and ruggedness ensuring reliability even when exposed to the harshest conditions. The ATN OTIS-14 contains miniature thermal imaging technology enabling the highest quality stable image in the most compact package. Thermal imaging capability has great utility for both night and day operations. Its versatility and compact size guarantees its usefulness across the full spectrum of operations both night and day. The ATN OTIS-14 features simple user friendly operating controls, one year warranty, quick detach rail system for attaching accessories or mounting the OTIS-14 to a weapon, hands-free adaptability, compatible with 3x Afocal lens for increased magnification, light weight yet rugged design, and the latest digital thermal technology. The ATN OTIS-14 will serve as a benchmark for thermal imaging devices. With the OTIS-14, ATN stands poised to do for the thermal imaging what ATN did for night vision optics; develop and manufacture high-quality state-of-the-art products at competitive prices, backed by ATN’s industry leading customer support. Numerous other accessories are available that are compatible with the ATN OTIS-14 Thermal Imaging device. MSRP of the new imager is $10,995. For more information please contact American Technologies Network Corporation, Dept. SAR, 20 South Linden Avenue, Suite 18, South San Francisco, CA 84080. Phone: (650) 875-0130. Fax: (650) 875-0129. They can be found on the web at www.atncorp.com.

Brownells New Gun Specific Driver Set for Glocks

While Glock pistols don’t require many tools for disassembly, armorers and other pros use some special items to make the job easier. Brownells, the Montezuma, Iowa gunsmith supply house, has combined them all into one compact, self-storing unit: their Screwdriver Set for Glock (#080-000-408). You get a nut driver for the front sight nut, a punch for the frame pins, one to help with magazine disassembly, a flat blade to push the mag catch spring aside and two Allen bits for various adjustable rear sights. All the “bits” fit into the full-size, hollow handle with a short shank, to keep you close to the work for maximum control. The Screwdriver Set for Glock is one of 30,000+ items listed in Brownells easily recognized, horizontal format, Catalog #61 that has become the standard reference for gunsmiths and serious hobbyists since the company was founded in 1939. Answers to any installation or troubleshooting questions – on Glocks or other guns, and gunsmithing processes – are available from the experienced technical services staff with a quick, toll-free call to Brownells at (800) 741-0015. Brownells is the world’s largest supplier of firearm parts, gunsmithing tools, equipment and accessories. All of their products are backed by a 100% satisfaction, unconditional, lifetime guarantee. To order the Screwdriver Set for Glock or get a copy of any Brownell catalog contact them at Brownells, Dept. SAR, 200 South Front Street, Montezuma, IA. Phone: (641) 623-5401. Fax: (641) 623-3896. Website: www.brownells.com.

Mossberg Now Has a New LBA Trigger

For 90 years Mossberg has been a leader in the design and manufacturing of firearms in the hunting, shooting, military and law enforcement community. This year marks another great year for Mossberg as they introduce the new Lightning Bolt Action (LBA) Trigger System for their centerfire bolt action rifles – enhancing the performance and accuracy while keeping safety in the forefront of its development. With its distinctive skeletonized lightning bolt trigger blade, the Lightning Bolt Action Trigger System offers the best in form and functionality, giving the shooter the flexibility of adjusting the trigger pull without the need of taking their rifle to a gunsmith. A simple twist of a standard screwdriver enables the LBA trigger to adjust from 2 to 7lbs. The design of the LBA trigger’s sear engagement offers a truly crisp, creep-free trigger, optimizing accuracy. The LBA trigger blade blocks the sear from releasing the striker unless the blade is fully depressed, even at the lightest adjustment setting. The trigger assembly is machined from aircraft-grade aluminum then hard-coat anodized to military specifications, preventing corrosion and minimizing wear over time. With Mossberg’s extensive line of 4×4 and 100ATR bolt action rifles, you can expect to find the new LBA Trigger System in over 100 models in 2009. The LBA Trigger System is taking Mossberg’s line of firearms to the next level in accuracy and performance. For more information on this as well as all of their current line of firearms, please contact them at O.F. Mossberg and Son’s, Inc., Dept. SAR, 7 Grasso Avenue, North Haven, CT 06473. Phone: (203) 230-5300. Fax: (203) 230-5420. Their website is www.mossberg.com.

New Fiocchi Frangible .223 Ammo for Training

Industry innovator Fiocchi Ammunition is proud to announce a new .223 Remington 45-grain frangible cartridge. Part of a new frangible, non-toxic line of quality cartridge products, this innovative round is ideal for the training market, and in particular for indoor shooting ranges, close-quarter steel plate shooting, and for use by police departments in tactical training scenarios. This new Fiocchi .223 Rem. cartridge, while part of the competitively priced Rifle Shooting Dynamics line, does not skimp on the quality of its ingredients. The cartridge features well-known and respected SinterFire frangible, lead-free bullets. Fiocchi chose the copper/tin composite SinterFire bullet for this cartridge as it yields the proven benefits of functional reliability (due to the bullet’s molded-in taper crimp), along with uniform dimensions and weight, that all work together to give the user the added attributes of superior accuracy and consistent performance. SinterFire bullets are ideal for training, since they contain no jacketing or plating, and will literally crumble to dust upon impact with hard surfaces. Since its name and thus its more than 130-year reputation rest on each round, Fiocchi strives to achieve ammunition perfection with every round it produces. Fiocchi’s .223 Rem. 45-grain frangible round is also the fastest cartridge in the company’s entire .223 Rem. product range. Leaving the muzzle at a sizzling 3,300 fps while generating a relatively mild 1,087 ft./lbs of energy, the new round is still moving at a very brisk 2,812 fps at 100 yards while putting out 790 ft./lbs. energy. At 300 yards, the frangible bullet is still racing along at 1,976 fps and producing 390 ft./lbs. energy. While at the maximum practical target distance of 500 yards, the round delivers a more than adequate 1,329 fps velocity and 176 ft./lbs. energy. For more information on Fiocchi’s .223 Rem. 45-Grain Frangible ammunition or Fiocchi’s full line of rifle, pistol, rimfire, shot shell and unique rounds, contact them at Fiocchi Ammunition of America, Inc., Dept. SAR, 6930 North Fremont Road, Ozark, MO 65721. Phone: (417) 725-4118. Fax: (417) 725-1039 or visit them on the web at www.fiocchiusa.com.