BRP Corporation Introduces New STG 34k Machine Gun

BRP Corporation has just introduced their newest Stemple Takedown Gun (STG), the STG 34k, and features complete new parts packages that are be installed on unmodified/transferable Stemple 76/45 machine gun receiver tubes. The set-up is assembled using an AK underfolding or fixed stock, Swedish M37/Suomi M31 components, newly manufactured Stemple-compatible parts and MG 34 fire-control parts with the same select-fire trigger system. Selecting semi or fully automatic fire is simply done by moving your trigger finger to the top or bottom of the “W” shaped trigger. Pulling the upper “E” position on the trigger enables semiautomatic fire; pulling the lower “D” position enables full auto fire. There are “takedown” systems of interlocking subassemblies that can be easily attached or removed from the 76/45 receiver. This method of assembly is ATF approved. The Stemple 76/45 machine guns are fully transferable to individuals. The gun weighs just 10 pounds. It uses Suomi KP 31 25, 36 or 60-round magazines as well as 40 and 70-round drums. Sights are co-witnessing along a full length Picatinny rail. The gun’s foregrip also has a three sided rail system. The finished gun features an 8.5 inch barrel that is threaded 1/2×28 for a suppressor and fires at a cyclic rate of 750 rpm. The finish of the steel parts is black oxide and the aluminum parts are black anodized. For more information please contact BRP Corporation, Dept. SAR, 7590 Commerce Lane, Clinton, MD 20735. Phone: (301) 807-5234. Fax: (301) 234-0059. Their website is www.brpguns.com.

A Suppressor for First Time Buyers

AWC Systems Technology, a world leader in commercially available silencer technology, introduces the new Odyssey II. The Odyssey II is the first entry level silencer released by AWC, and is designed for use on all .22 LR pistols and rifles. It incorporates the new Lynsonic technology that AWC Systems is now introducing into their entire line of suppressors. The Odyssey II has an overall length of 6 inches, a diameter of .98 inches, and a weight of 5.5 ounces. It is constructed of stainless steel and high tension aircraft grade aluminum. This new silencer is offered in standard matte black or OD green finish. The Odyssey II is the perfect suppressor for first time buyers or those recently becoming familiar with the use of silencers. AWC Systems Technology also offers an extensive line of more sophisticated silencers to choose from for the more experienced buyers, including the Archangel “T”, of which the Odyssey II is comparable with. AWC Systems Technology now invites everyone – from beginners to pros – to experience the comfort, accuracy, and enjoyment of shooting with the advanced technology, quality, and durability found only in an AWC Systems Technology product. For more information on this as well as their entire line of world-class suppressors, please contact them at AWC Systems Technology, Dept. SAR, 1515 West Deer Valley Road, Suite 105A, Phoenix, AZ 85027. Phone: (623) 780-1050. Fax: (623) 780-2967. They can be found on the web at www.awcsystech.com.

TangoDown Vertical Grip Now Available with QD Lock Lever

TangoDown’s vertical foregrips are already the choice of real-world professionals because of their ergonomic design, waterproof internal compartment and patented switch pockets for Insight and SureFire pressure switches. Now TangoDown’s battle-tested grips will be available with a self-locking, quick-detach attachment, featuring a Lock-Lever mount, making the grips fast to mount onto a Mil-Std 1913 accessory rail. The Lock-Lever mount is a throw-lever style mount in which a lever pivots side-to-side to securely lock the mount’s clamp bar onto an M1913 rail. However, unlike other brands of lever mounts, the Lock-Lever requires no tools to adjust and locks itself automatically when pressed shut. The Lock-Lever mount, made by American Defense Mfg. to TangoDown’s specifications, is CNC machined from aerospace-grade aluminum and features a stainless steel cross pin nut and spring-tensioned clamp bar. The clamp bar is quickly and easily adjusted for the correct tension on the rail by simply pressing on the Lock-Lever itself to expose a nut that is turned by mere finger pressure to adjust. No tools whatsoever are needed and adjustments take only seconds, yet are rock-solid. TangoDown’s Lock-Lever mount is available on both the full-size vertical foregrip and the “shorty” version, made for maximum compactness. The grips retain TangoDown’s patented recessed pockets for either Insight or SureFire pressure switches and are available in flat dark earth, foliage green or flat black. The manufacturer’s suggested retail price is $85. For more information contact TangoDown LLC, Dept. SAR, 1588 Arrow Highway, Unit F, La Verne, CA 91750. Phone: (909) 392-4757. Fax: (909) 392-4802. Their website is www.tangodown.com.

New SureFire X400 LED WeaponLight

The SureFire X400 is a rugged LED WeaponLight with a powerful, fully integrated red laser sight. Its versatile beam and highly visible laser make it an excellent choice for both close and longer range applications. The X400’s solid-state LED, which has no filament to burn out or break from the effects of recoil, generates 110 lumens of blinding light and continues producing tactical-level light (enough to overwhelm the night-adapted vision of an aggressor) for 2.4 hours on a set of batteries. The X400’s unique Total Internal Reflection (TIR) lens gathers virtually all of the LED’s light and forms a tightly focused beam that reaches far into the darkness but has enough surround beam to accommodate a user’s peripheral vision. At 635 nanometers, the X400’s laser sight is one of the most powerful available to the general public. Its shorter wavelengths make it nearly twice as bright as the nearest competitor’s laser sight, which means it’s more visible to the human eye and easier to track at longer distances. The laser’s sighting adjustment uses Nylok screws, which won’t back out or loosen from the effects of recoil, so the X400 rarely needs to be re-zeroed even after extended use. A tough, hard-anodized aerospace-grade aluminum body protects the X400’s electronics, and a tempered Pyrex window covers its TIR lens and LED. O-ring seals and gaskets keep out dust, dirt, propellant residue, and moisture. Ambidextrous switching makes it easy to operate the X400 with either hand, and remote switching for many weapons is available for precise control without altering your grip on the weapon. The X400 slides onto most handguns with Universal Standard accessory rails and fits many guns without rails via a SureFire rail adapter. It can also be mounted on long guns sporting a Mil-Spec Picatinny rail. For more information, please contact SureFire LLC, Dept. SAR, 18300 Mount Baldy Circle, Fountain Valley, CA 92708. Phone: (714) 545-9444. Fax: (714) 545-9537. On the web at www.surefire.com.

LaserLyte Introduces New Universal QD Rail Mount System

LaserLyte, the leader in laser technology, introduces the new and innovative Quick Detachable (QD) Universal Rail Mount System that attaches quickly and securely onto all 3-inch barrel sub-compact pistols with rails and all other weapons with rail systems. The system is 50 percent smaller than previous versions and features an ambidextrous slide switch that allows the operator to activate the laser from the left or right side. Constructed of T6 aluminum for extra strength and durability, the QD Universal Rail Mount System weighs .9 ounces and is available with the reliable 650nm laser module (maximum range of 500 yards at night). The proven round body design can easily adapt to an optional remote switch for long gun mounting. The new low profile design will fit into almost any nylon holster. This product’s small profile, quick detachable features and ambidextrous switch make it one of the most user-friendly sighting systems available. MSRP is just $99.95. For more information please contact LaserLyte, Dept. SAR, 101 Airpark Road, Cottonwood, AZ 876326. Phone: (928) 649-3201. Fax: (928) 649-3970. Their website is www.laserlyte.com.

Japanese T96 and T99 Magazines from J&G Machine Service

J&G Machine Service has announced new Japanese T96 and T99 light machine gun magazines. They are intended for the shooter, not as a reproduction for the original Japanese magazine. Each magazine is individually cut from steel plate, hand formed and fitted, welded, hand finished and blued. Every magazine has been test fired for fit and function. J&G Machine Service guarantees each magazine: “Satisfaction Guaranteed.” Both magazine models weigh a little more than their original Japanese magazine counterpart due tothe use of plate steel. In tests, the 30-round magazines functioned flawlessly. The Type 99 magazine is for the 7.7x58mm cartridge, while the Type 96 is for the 6.5x50mm round. Why risk damaging an original $1,000 magazine when you can now use J&G Machine Service’s $180 (postage paid) shooter’s magazine instead. For information or to place an order, please contact J&G Machine Service, Dept. SAR, PO Box 10, Congress, AZ 85332. Reach them by phone: (928) 427-3180. Email: AZGUNSO@yahoo.com.

New Amphibian “S” From AWC Systems Technology

AWC Systems Technology, a worldleader in commercially available silencer technology, introduces the newly redesigned Amphibian S, the last silenced .22 pistol you will ever own. The AWC Amphibian S is the Ruger KMK 512 with an integral AWC Systems Technology suppressed barrel. This pistol is constructed of stainless steel and will never be worn out, damaged beyond repair or become obsolete. AWC Systems Technology can also modify any existing suppressed Ruger pistol to this standard of excellence. The Amphibian S is offered in stainless matte navy grey or polished stainless finish. An optional upgraded finish of matte black, charcoal black or NATO green is also available. The integrally suppressed barrel has an overall length of 7 inches and complete pistol system weight of 41 ounces. Shooting 40gr high velocity, the Amphibian S is dead accurate and is much less noisy than a CO pellet pistol.

AWC Systems Technology has provided suppressed weapons systems to the U.S. Army, Navy, Air Force and Marine Corps, major law enforcement agencies nationwide, the Department of the Interior, the Department of Energy, federal and state correctional facilities and Special Forces units in Central America and the Middle East. For more information contact AWC Systems Technology, Dept. SAR, 1515 West Deer Valley Road, Suite 105A, Phoenix, AZ 85027. Phone: (623) 780-1050. Fax: (623) 780-2967. On the web at www.awcsystech.com.

GG&G Introduces New Back Up Iron Sight

The New GG&G A2 Spring Actuated Back Up Iron Sight (BUIS) represents the latest innovation in BUIS products. Many operators requested a BUIS that would deploy with just the push of a button and GG&G delivered. The unique and proprietary design of the spring actuated mechanism captivates the actuator spring and mechanical components, preventing adverse environmental contact. The revolutionary design ensures reliability and long life of a critical component. The superior new design of the A2 Spring Actuated BUIS provides the operator the ability to activate the push button with the non fire control hand ensuring the user a tactical advantage under any condition. The locking mechanism functions for both the raised and lowered position, completely eliminating the potential of accidentally raising or lowering the sight and providing a low profile stance when lowered to allow the use of most optics. When properly mounted, the A2 Spring Actuated BUIS can be used to co-witness with most red dot and holographic sighting systems. In the unfortunate event of a electro-optic failure, the A2 Spring Actuated BUIS will deploy rapidly and securely. Standard A2 double peep aperture and windage knob allows for known point of impact by the end user. Optional XS same plane aperture or Trijicon Tritium Apertures are available by request. The mount body and sight stem are manufactured from solid billet 6061 T6 Aluminum, Type III hard anodized matte black. Steel components are Matte Black Manganese Phosphated and all finishes are per Mil-Spec. For more information, or to order the A2 Spring Actuated BUIS or any other of their fine products, please contact them at GG&G, Dept. SAR, 3602 East 42nd Strave, Tucson, AZ 85713. Phone: (800) 380- 2540. Fax: (520) 748-7583. Their website is www.gggaz.com.

Buffer Technologies Introduces New AR-10 Buffer

Buffer Technologies is expanding its line of high-quality tactical components with the addition of a hydraulic AR-10 buffer from Enidine, Inc. The new hydraulic AR- 10 buffer is an improvement over the weapon’s standard metal tube buffer. It dramatically reduces felt recoil and helps shooters maintain accuracy by suppressing bolt bounce and muzzle flip. It also helps protect optics by reducing shock to the delicate instruments. The Enidine buffer replaces the standard buffer assembly in the AR-10, but shooters retain their stock and buffer spring. The buffer has been engineered for an easy installation that doesn’t require any special tools or gunsmithing. The new AR-10 buffer is made from anodized steel with a corrosionprotection finish. Buffer Technologies also offers the AR-Restor, Enidine’s hydraulic buffer for both carbine and full stock AR- 15s. Enidine is a market leader in hydraulic energy absorbers for the industrial, aerospace and defense industries. Its hydraulic recoil buffers are used by the U.S. military and NATO forces for automatic weapons. For more information on this as well as their outstanding line of accessories and firearms buffers, please contact them at Buffer Technologies, Dept. SAR, P.O. Box 105047, Jefferson City, MO 65110. Phone: (877) 628-3337. Fax: (573) 634-8522. They can be found on the web at www.buffertech.com.

Sabre Defense Introduces New M2 and MK19 Tools

Sabre Defense Industries, a prime contractor to the United States military as a supplier of ordnance systems and components, is proud to introduce a simple solution for reducing breakdown time on M2s and MK19s while preventing potential personal injury; the M2 Tool and MK19 Tool. Simple disassembly and reassembly of an M2 or MK19 can be time consuming especially when in the field where every minute of response time is precious to the safety of the operator and his team. Throw in cold weather and wearing gloves and loosening a bolt with a standard wrench becomes near impossible. The Sabre M2 Tool is the perfect size for loosening and removing bolts and adjusts the timing without having to remove gloves. The M2 Tool makes removal of the drive rod spring easy and a special end sets the headspace gap and buffer body release pin. The Sabre MK19 Took allows the operator to hold down the sear to remove the bolt while preventing injury to the operator’s thumb. A pry end removes charging handles, aligns the slide and pin for the back plate. A builtin hammer can be used to remove the secondary drive lever. Both Sabre tools have been developed and tested with combat troops in mind. Soldiers in the field using the M2 or MK19 tools are already experiencing a time saving difference from a standard minimum operating time of 8 minutes to 3 minutes or less. Priced at $90 SRP per tool, Sabre’s M2 and MK19 Tools are the most efficient breakdown tools on the market. For more information or to place an order, please contact Sabre Defense Industries, LLC, Dept. SAR, 450 Allied Drive, Nashville, TN 37211. Phone: (615) 333-0077. Fax: (615) 333- 6229. Their website address is www.sabredefense.com.

SafeBox Portable Security Unit

Response Technologies Incorporated (RTI) has just announced their new SafeBox, a portable security unit. The SafeBox is small enough to mount almostanywhere and large enough to protect some of your most valuable possessions. The most innovative and unique feature is that the SafeBox is portable. Mount the SafeBox’s steel sleeve in your car, boat, RV, home, office, almost anywhere. Just unlock and slide the safe out of the sleeve and now the SafeBox is a portable lock box. It can be open or unlocked until secured back into its steel sleeve again. By purchasing additional sleeves your valuables can be secured in multiple locations. The places sleeves can be mounted are almost endless. The SafeBox is ideal for jewelry, guns, medications, or just about anything you need to keep safe. The SafeBox features barrel style keys and hardened steel construction. Safes can be keyed alike for multiple location security. For more information, please contact Response Technologies Incorporated, Dept. SAR, P.O. Box 222, Flanders, NJ 07836. Phone: (973) 252-7755. Fax: (973) 252- 7771. Website: www.response-tech.com.