SETTING THE STAGE

The SPR was tentatively explored in the 1990s within certain SOCOM units. What started as a simple upper receiver group upgrade quickly turned into complete rifle program. The SPR originated as a stopgap measure, filling the void between the M4 carbine and the M24 bolt-action sniper rifle roles. The 9/11 attack, resulting in our constant engagement around the world, brought the SPR program quickly to fruition. The SPR became the weapon of choice when dealing with threats at ranges beyond the capability of the M4.

The movie “Lone Survivor”, in which Mark Wahlberg portrays U.S. Navy SEAL Marcus Luttrell, shows the main character using a Mk 12 rifle. The SPR/Mk 12 found favor with SOCOM forces for a multitude of reasons such as its high degree of accuracy, versatility, portability, increased firepower when compared to pure sniper rifles, optics package, suppressor compatibility, more ammunition carried per pound than 7.62 NATO, etc. The Marines eventually started using the SPR, as well, in a DMR role. Examples of military SPR use include by a spotter on a two-man sniper team or as the primary sniping weapon where larger caliber heavy bolt action sniper rifle is not practical, for instance, in a target rich environment where engagement range is between 300-700 yards. Imagine Iraqi urban environments where snipers would hole up in a house, blocks away, to provide cover for clearing troops. The SPR can place rapid precision fire on multiple targets out to 800 yards while still being able to cope with CQB, if required. This firepower capability is grounded in the SPR’s minimal recoil and smooth operation thanks to rifle length gas system coupled with 5.56mm ammunition.

Phased out of production in 2017 by the MK17 (SCAR-H) and MK110A1, the SPR is still used by SOCOM units hoarding the ones left in inventory. Navy SEAL armorers reportedly still produce Mk12s for its teams thanks to their access to discretionary funds. This is a strong supporting statement of the Mk12’s performance.

AMMUNITION SUPPORT

The SPR’s sub-MOA accuracy is an important part of its appeal. This is thanks to the 5.56mm load specifically developed for it by Black Hills Ammunition, the Mk 262 round. Like the SPR rifle, the Black Hills Mk 262 ammunition has been tweaked since its introduction. Updates include a cannelured 77-grain Sierra MatchKing bullet, low flash propellant blend, 5.56mm brass and other un-disclosed proprietary improvements. The Mk 262’s most important characteristic is repeatable accuracy. Black Hills indicates ammunition lot accuracy test consists of 10 groups of 10 shots at 300 yards. No lot ships unless it shoots sub-2-inch groups at 300 yards.

Interestingly, the Mk 262 has unexpected qualities beyond long range accuracy. Mk 262’s terminal performance soon had other SOCOM team members stuffing it into their magazines. Often liberating it from their snipers. How did the 77-grain Sierra MatchKing do this in M4 14.5-inch and Mk18 10.3-inch barrels? The MatchKing’s open tip hollow cavity puts the majority of weight towards the projectile’s rear so that it is more stable in-flight, increasing accuracy. However, when the bullet strikes soft tissue, the heavier base comes around and causes the bullet to tumble. The hollow nose cone breaks off and often the bullet fragments at the cannelure. This happens across a wide range of the velocity spectrum, which is why Mk 262 ammunition proved effective in SBRs in addition to the longer-barreled SPRs.

MODERN RENDITION

As is prone to happen with a rifle requested and proofed by the USSOCOM operators, as word got out about the SPR/Mk 12, civilians wanted it. The SPR was viewed as a multi-purpose weapon. SPR-type ARs can be found overlooking prairie dog towns, predator hunting, as well as in 3-Gun and PRS competitions. Various manufacturers have produced their versions of the SPR. These rifles span the gamut from exact clones to shadowing noteworthy characteristics such as 18-inch match barrel, upgraded trigger, free floated rail, and other accuracy maximizing features.

The SPR that recently caught my eye is the IWI Zion-15 Special Purpose Rifle (SPR). For me the SPR’s most salient features consist of accurate reliable firepower in an easily portable platform. The Zion-15 SPR delivers. The IWI SPR weighs only 7.6 pounds with 18-inch barrel. This is important as an SPR is required to be able to deal with CQB encounters with distances measured in feet while still offering precision fire capability out to 800+ yards.

The IWI SPR is manufactured and assembled at the IWI U.S. facility in Middletown, Pennsylvania. Conversation with IWI U.S. Vice President of Sales and Marketing Jeremy Gresham confirmed certain nuanced attention to detail features in the IWI SPR. For example, IWI makes their own barrels at the Pennsylvania facility with a special 18-inch 5R 1:8-twist, nitride-treated, chrome moly vanadium barrel for the IWI SPR. A collaboration with Timney Triggers finds an IWI-specified two-stage match flat trigger installed in the IWI SPR. The importance of a quality trigger cannot be overemphasized when trying to produce sub-MOA accuracy. A rifle length adjustable gas systems provides the IWI SPR with smooth operation. The adjustable gas block allows for easy adaptation to suppressor use. The IWI website does not mention this important IWI SPR feature. The adjustable gas block was a pleasant surprise when inspecting the rifle upon arrival considering suppressor use is almost standard procedure anymore along with historical precedent of military SPR best practices.

Other thoughtful IWI touches are the built-in full-length ARCA rail on the bottom of the 17-inch MLOK forend. A steel barrel nut is another accuracy enhancing upgrade. A quality barrel nut is a vital component, providing a solid connection and proper alignment between barrel and upper receiver which ultimately contributes to consistent accuracy. B5 Systems adjustable Enhanced SOPMOD buttstock and Type 23 P-Grip finishes off IWI SPR furniture. The B5 pistol grip has a steeper vertical angle than standard pistol grips and an extended tang to improve ergonomics and ensure proper trigger finger index.

SUPPORT COMPONENTS

The versatility of the original SPR platform is indicated by the different optics end users equipped it with, such as 3.5-10x, 2.5-8x, and 3-9x optics. I considered mounting a Trijicon VCOG 1-8x but went with the higher magnification Trijicon Ten Mile 3-18×44. I really wanted to accentuate the precision component of the rifle. I am glad I did once the first range session showed what the IWI SPR could do in the accuracy department. An offset mount featuring a red dot will quell any concerns of the Trijicon Ten Mile 3-18×44, if the IWI SPR is pressed into a close-range affair. The offset optic mount allows a quick rotation of the rifle in the shoulder pocket to access the red dot optic with minimal effort or disturbance of handling.

The SPR was intended to be used primarily suppressed. This was the best way to conceal the origination point of shots taken with it. A lightweight Rugged Suppressors Alaskan360 was an easy choice to mount on the IWI SPR. A Rugged Suppressors 2-port 5.56mm muzzle brake replaced the birdcage flash hider that arrived with the IWI SPR. The Rugged Suppressors brake makes for easy removal and attachment of the Alaskan360 suppressor.

Ammunition tested with the IWI SPR was a combination of Black Hills Ammunition loads—the Mk 262 and civilian version 77-grain OTM, multiple Hornady loads—75-grain BTHP and 55-grain VMAX, SIG Sauer 77-grain OTM and Federal 62-grain FMJ-BT. The IWI SPR rifle kept all loads tested at 1.25-inches or better at 100 yards. Mostly better. The Black Hills loads—Mk 262 and 77grain OTM—SIG Sauer 77-grain and Hornady 75-grain and 55-grain loads produced sub-MOA groups. Some of these groups were in the ½-inch range. Impressive performance. Groups at 200 and 300 yards confirmed 100-yard findings. This is a compliment to IWI SPR’s barrel and trigger, Trijicon optic, and ammunition. At times it felt like the I was letting the IWI SPR down. After firmly establishing what it could do, when a group opens up to an inch or more, you know who the weak link is. The IWI SPR produces accuracy that fully supports the original SPR intended role. Velocity figures ranged from 2700 to 3000 feet per second over a Caldwell chronograph.

FIELD EVALUATION

Real proficiency begins with realistic training scenarios. Range evaluation at Echo Valley Training Center (EVTC) consisted of taking advantage of the recently added 3-gun rifle range with multiple plates set up at four different distances stretching out past 400 yards down a ravine following natural contours. Multiple sizes and shapes of steel plates occupy each station. A Burris Signature HD Spotting Scope 20-60x85mm proved handy for spotting purposes.

The IWI SPR/Trijicon/Rugged Suppressors combo was used in the prone, sitting, kneeling, standing positions, or shooting from a BOG Infinite Deathgrip tripod. The IWI SPR’s ARCA railed forend proved handy for securing into the BOG tripod. The IWI SPR proved to “hang” well from less well supported positions and was very manageable in getting into and out of shooting positions. Another twist is to have a companion pick the target and shooting position for the shooter to engage as quickly as possible.

PERFORMANCE

Clay pigeons were sniped with regularity at 475 yards from the supported prone position and off the BOG tripod. Felt recoil was minimal (as expected) with a suppressed 5.56mm. With the Rugged Suppressors Alaskan360 attached it was no problem to spot a miss and have another round on the way from the IWI SPR before the spotter could even relay the information.

TWO CENTS

While I appreciated IWI’s choice of a B5 stock and pistol grip, some end users may consider a fixed, precision-oriented buttstock. I will stay with the B5 as I favor the ability to reduce stock length. A gas buster-type charging handle is recommended if firing multiple rounds from one position when suppressed. An extended charging handle is another recommendation, especially with an optic mounted for easier manual operation. Lastly, ambidextrous controls would also have been a nice touch.

IWI indicated that “user subjective” items like charging handle, safety, and muzzle device was left as mil-spec standard so that the end user could build from there. Along these lines I have no issue with bird cage flash hider. With suppressors becoming so popular, its best to allow the end user to choose their muzzle device or just direct thread it onto the barrel. Frankly, IWI’s decisions in this regard make sense when the shockingly low MSRP of $1299 for the IWI SPR is revealed. $1299 for the kind of accuracy exhibited along with an adjustable gas block, ARCA rail forend, and B5 furniture is a great value.

MULTI-PURPOSE

The inherent adaptability of the AR platform is one its greatest attributes. The ability to send bullets downrange accurately, whether for competition, target shooting, military, law enforcement, or personal defense, ensures its place in the rifle marketplace. There is minimal difference between AR labels such as Recon, Recce, SPR, DMR, Mk12, Competition, etc. These ARs are required to be equally at home with close-range hose downs and long-range precision shooting. The IWI SPR rifle is an excellent example of this. The IWI SPR’s handling with superior accuracy is hard to deny. It’s smooth, easy, and accurate. And, best of all, it’s a great value.

SPECIFICATIONS

By Vladimir Onokoy

Venerable Russian SVDM Sniper Rifle Nearing End of Service with Russian Forces

The semi-automatic Dragunov sniper rifle, originally called “SVD” (sniper rifle designed by Dragunov), is very well known all around the world. To this day, SVD remains the main DMR (Designated Marksman Rifle) in the Russian Army and in a number of ex-Soviet states.

Unfortunately, complete absence of imports to the U.S. and other Western countries created a certain information vacuum regarding new modifications of this venerable rifle, namely the SVDS and the latter Dragunov SVDM.

This article will try to showcase some of the features of the latest Dragunov variant, since, back in the day, this author was involved in some of the technical and military trials for this rifle.

The Original SVD Dragunov

The original SVD Dragunov is still in production in its original form; the only difference one can see right away is that the original wood stock and handguard are now made of black polymer.

The civilian version of SVD Dragunov is called “Tigr,” which means—you guessed it—”Tiger.” This rifle is in high demand and is very popular with Russian hunters and gun enthusiasts who want to own this piece of Soviet small arms history.

The main difference between the SVD and the Tigr is the barrel twist rate. The original twist rate of the SVD barrel is 1:12, which proved to be very effective with 7.62x54R sniper ammo but did not work well with tracers or armor-piercing rounds.

Around 1975, the Soviet military demanded that Dragunov rifles should be able to be effectively used with all types of ammo, and after some additional testing, the twist rate was changed to 1:9. It made overall accuracy slightly worse (some claim 25% worse), but hooray, now you can accurately shoot tracers out of your sniper rifle. Isn’t that what a sniper needs the most?
It should probably come as no surprise that some veteran Russian snipers prefer Dragunovs made before 1975. The good news is that civilian “Tigers” remained at the original 1:12 twist and can often be more accurate than military SVDs.

The SVDS

The next big thing was the SVDS, DMR rifle with a folding stock designed for Airborne troops.

SVDS, designed in 1991 and accepted into service in 1995, features a folding stock that folds to the right side of the weapon (and no, you cannot shoot with a folded stock) and a shorter barrel (22.2 inches) instead of 24.4 inches with the original SVD.

Everything else remained the same. On both the SVD and SVDM scopes are mounted via a side mount, and there is no easy way to use modern front-mounted night vision and thermal devices in conjunction with a day optic.

A number of private companies offered modernization kits for the SVD, the most notable being Sureshot Armament Group (sureshot-armament.com). They offer kits for both SVD and SVDS, and recently, their products gained considerable popularity with both civilians and military snipers.

However, before those updates became available, both the Russian military and Izhmash factory came to the realization that SVD in its original configuration has certain shortcomings that should be addressed.

First, it is not easy to mount a bipod on a Dragunov. Over the years, a number of bipods were developed for the SVD, but unfortunately, none of them caught on.

By the end of 2010, modern scopes such as Nightforce, SWAROVSKI and Schmidt&Bender became very prolific in the Russian Special Forces, and SVD shortcomings designed for side-mounted scopes became very apparent.

New Generations

That is why the Izhmash factory decided to develop a new version of the SVD with integrated bipod and Picatinny rail. The first prototype was demonstrated in 2012.

The final version of the rifle was ready in 2014. It featured a quick-detachable bipod, similar to the one used in the new version of the SV98 rifle, with railed receiver cover, folding stock and a very thick and heavy barrel.

Unlike previous generations of the Dragunov, SVDM features a gasblock that is combined with a front sight, the receiver cover with the Picatinny rail is hinged, and to open it, you have to rotate the lever in the back of the receiver downward. SVDM uses standard 10-round Dragunov magazines.

There is no official information about the users of the rifle, but as always, you can get a lot of information from the open sources. For example, SVDM was demonstrated during the Open Day of the 4th Guards Kantemirovskaya Tank Division.

Another sighting of SVDM was rather unexpected. To put things into perspective, imagine the most iconic view of Russia—Red Square. After looking at the photos, we can say that the SVDM is definitely used by the unit of Federal Protection Service that is similar to U.S. Secret Service Counter-Assault teams.

As for my personal impressions, I would say that SVDM is in an entirely different class compared to the regular SVD. A much heavier barrel and heavy optics make the SVDM less maneuverable and better suited for shooting from a static, well-prepared position. It is certainly too heavy for a classic DMR used on the squad level.

During technical trials, one thing that definitely needed improvement was the optic that came with the SVDM—the 1P88-4 variable power scope. I remember once, before a demonstration shoot, I grabbed the scope to mount it on the rifle and get on with zeroing. I opened the caps and wanted to check the quality of the glass, but to my surprise, I could not see the reticle.

The Russian military industrial complex is a close-knit community, and in a minute, I was dialing on my cell phone the number of the senior design engineer from the factory that made the scope. The conversation was rather short:

“Hello, buddy! I’ve got your scope, and I can’t see the reticle. Anything you can recommend?”
“Yes, that is actually quite normal! Just play with the magnification knob; eventually the reticle will be seen.”
“Thanks pal!”

And he was right. When I got the scope to 12x magnification, the reticle suddenly appeared out of nowhere. “Well—I thought—it is true what they say, Russian scopes do actually have some very unique characteristics.” I am sure that since 2014, that scope has improved a lot.

SVDM’s Last Stand?

For now, it looks like the SVDM will be the last iteration of the famous rifle. Its potential successor is the SVCh, a semi-automatic DMR designed by design engineer Chukavin from the Kalashnikov group. The SVCh is meant to slowly replace Dragunovs, first in the Russian Special Forces and later in the “Big Army.”

However, without any doubt, even if it happens, Dragunovs will remain popular in the conflict zones such as the Middle East in Africa for many years to come.

Greg Felton of Law Enforcement International (LEI) in the UK, was trying to meet the requirements of a friendly Government to supply a 7.62x51mm “Designated Marksman Rifle.” No product on the market met the client’s particular specifications. Greg brought in Karl Lewis of Lewis Machine & Tool (LMT) from the U.S. After much brainstorming about the needs to be filled by this new rifle, Karl and Greg started in on the project. The client wanted select-fire capability, but the first designs were kept to semiautomatic only, with a 16-inch barrel. By good fortune, as final development and trials on the semiautomatic were completed, the British MOD published an “Urgent Operational Requirement” (UOR) solicitation for such a rifle for immediate deployment in Afghanistan. The rifle was submitted for trials and the design won the competition, was contracted for and designated as the L129A1 rifle, with the vernacular name as the “Sharpshooter Rifle;” comparable to the U.S. DMR (Designated Marksman Rifle). LMT and LEI have now finished development of the select-fire version, as well as some rifles with shorter (13.5-inch) barrels and other options – but that’s another story…

In essence, Lewis Machine & Tool’s semiautomatic rifle, the LM308MWS, has been selected by British MOD as the new Sharpshooter rifle. The version of this rifle was in competition with the FNH SCAR-17 (Mk17 Mod 0), the HK model 417, Sabre Defence’s XR-10 and offerings from Knights and Oberland Arms. When the competition was over, LMT’s rifle was designated as the L129A1. It has been several decades since MOD has changed rifles for the longer range duties, and the new L129A1 is geared towards the 800 meter ranges being encountered in today’s combat environment. The AI .338 bolt action replaced and upgraded the AI L96 7.62mm several years ago. “Sharpshooter” is a completely new role for the British Army. Quick reaction, rapid follow up shots, long range, harder hitting than 5.56mm is the idea for the L129A1, but the sniper rifle is still a bolt action.

Greg Felton from LEI explained the ammunition requirement to SAR:

“The ammunition criteria stated by the MOD was that the rifle was to be able to use both RG 155-grain sniper ammunition, plus M80 ball and tracer, including de-linked machine gun belts. In the end during their trials with the various competitors, they found that the 155-grain fired so much better than the standard ball that it was made the official issue ammunition for the weapon. As to what it is “matched to,” we (Karl & I) designed the rifle to use both standard ball and 168-grain Match. With a 1:11.25 inch twist it works well with these weights, however, the heavier 175-grain projectiles need a faster twist for best results at longer ranges.”

The LMT Monolithic Rail Platform is a one piece milled upper receiver that includes four rails to the front, providing a stable platform for returning devices to zero on installation. It also allows for a free floating barrel that is interchangeable for different lengths, although not in this particular issue.

The initial order of 440 L129A1 Sharpshooter rifles has been added to several times now. The L129A1 has been in combat in Afghanistan since April 2010, and has received excellent field reports from the troops.

The XVIII International Defense Industry Exhibition MSPO 2010, in Kielce, Poland, September 6-9, 2010, has confirmed the MSPO as one of the leading European defense trade fairs – and the one with exceptional value for the Polish defense industry and Armed Forces as well.

This year’s fair was attended by over 360 exhibitors from 30 countries, and visited by almost 14,000 visitors from all over the world, having an opportunity to see up-close what’s best and most modern in military equipment. As in the previous years, a companion logistics fair LOGISTYKA 2010 was held together with the MSPO, showing off uniforms, equipment and vehicles for internal security and fire services.

The MSPO opening gala has hosted Poland’s newly elected President, Mr. Bronislaw Komorowski, along with many defense and state officials. A national exhibition by a guest nation at the MSPO has been a tradition since the beginning of the new Millennium. This year’s MSPO guest nation was the United Kingdom and the exhibition, opened by Britain’s Minister for International Security Strategy, Mr. Gerald Howarth, MP, showcased defensive and security manufacturers. The UK’s defense export volume and value have recently catapulted it to No. 2 in the world preceded only by U.S.

After last year’s dramatic fire wrecking one of the exhibition halls on the eve of opening, this year the visitors were amazed to see a beautiful, modern, bright new structure replacing it, fitted with an outdoor stage integrated under the entrance vestibule where the gala opening took place.

The fair has traditionally aimed at somewhat heavier or more complicated equipment than small arms, but nevertheless many interesting firearms, both foreign and domestic, had their Polish premieres there.

Radon – Poland’s Objective Modular Combat Rifle

Without a doubt, the star of the show and the most important domestic-interest event was the first public presentation of the Polish Army’s objective Modular Small Arms System-5.56 (MSBS-5.56), now christened ‘Radon’ (from elementary radioactive Radon gas, Rn, atomic number 86) in accordance with the Polish periodic table prototype codenaming procedure. The Radon, a joint venture between Warsaw’s Military Technology University (WAT) and Fabryka Broni Lucznik-Radon was shown in both configuration combinations, i.e. classic (lock, stock and barrel, MSBS-K or now Radon-K) and bullpup (MSBS-B/Radon-B), of the already two generations of the rifle: the shooting Technology Demonstrators (1st Gen) and mock-up of the future ‘Final Look’ designs (2nd Gen). Target Radon in both configurations would be a system comprising of: Combat Rifle, Automatic Carbine (CQB weapon), Designated Marksman Rifle (DMR), Grenade Launching Rifle (fitted with under-barrel GLM module) and an Infantry Automatic Rifle (high capacity magazine-fed heavy-barreled support weapon). All of these are to offer 80-90% parts interchangeability. The 1st Gen TD is somewhat blocky and sketchy, but it was just a working model of the concept, while the 2nd Gen ‘Final Look’ offers a much more ‘High-Speed Low-Drag’ design.

The main component of a thus configured system is a 100% common upper receiver, which is to be mated with different barrel modules, lower receiver modules, and butt-stock (or butt-plate – according to the configuration) modules. The upper receiver in both 1st Gen and 2nd Gen is to be made of light alloy. Radon is totally ambidextrous, including fire control levers, magazine and bolt release buttons mounted on either side, as well as reversible bolt handle, ejection port cover and a truly reversible bolt, enabling the ejection direction to be changed in seconds without the use of tools and requiring no parts to be exchanged.

The lower receiver module has a magazine interface for the STANAG 4179-compatible (AR-platform) magazine. The choice of lower receiver module governs the configuration of the weapon, as it comes in two different versions: one with the classical folding buttstock interface and the other butt-less with multiple fire control group configurations possible (military selective with fully automatic and/or burst capability, and semiautomatic-only for the DMR and civilian-legal rifle). The Radon offers a choice of interchangeable barrel subassemblies with different length barrels complete with muzzle device, gas chamber, piston and locking chamber. Individual barrel modules differ in length and thermal capacity or contour (e.g. the IAR or DMR barrels). If a classic configuration lower is chosen, a butt-stock is attached with a choice of folding telescoping or fixed telescoping; both offering an adjustable cheek-piece capability. The bullpup lower can only accommodate a butt plate module, as governed by the weapon’s overall canard configuration.

The modular rifle fires the NATO-standard 5.56×45 round, fed from various plastic or metal magazines of different designs – provided they are AR-platform compatible. Additionally, it can be fed from a large-capacity drum and/or double drum magazines, dedicated to the IAR support weapon. For the future, a 7.62×51 NATO standard rifle round system is being considered.

Radons (in its 1st Gen, or TD guise) are currently undergoing a rigorous testing program aimed at achieving total reliability in various operational environments. As these demonstrators are still more of test appliances than weapons ready for issue, efforts are being made at enhancing their ergonomics and aesthetics. Part of that effort are the ‘Final Look’ mock-ups, a sneak-peek into the Radon’s future, offering a mature, elegant form of the Radon’s 1st Gen TD. These were designed by a team of eager young men from WAT and elsewhere, combining a rich knowledge of technology, industrial design, and SF combat experience, promising that the finalized Radon, expected to be accepted and manufactured within several years, could be a superb combat rifle.

Other Polish Rifles in Kielce

Other than Radon, the FB Lucznik-Radom also showed another batch of now seemingly endless line of modernized Beryl rifles. After many years of design stagnation, we can witness a veritable fountain of Beryl modifications rolled-out each year since 2007. This year’s novel features were a hinged receiver cover and a STANAG 4179 magazine adapter, as well as a Beryl-specific Beta C-Mag, a joint-venture between FB and Beta, Co. The beefed-up hinged receiver cover, coupled with a Picatinny rail welded on top of it to offer a semi-solid (5 mm gap at the hinge) same-level 1913 rail all along the top from the gas block to the top cover edge, cured the most cursed-upon by the Polish military ailment of the Beryl: being the necessity of re-zeroing the sights on the overhead rail after each field-stripping requiring the rail to be detached in order to open the receiver for routine maintenance. The AR-magazine adapter for Beryl required a minor re-shaping (opening to full rectangular shape) of the magazine well – which however is still capable of holding an AK magazine as well. The Beryl-specific Beta C-Mag has an AK-style feed-tower enabling it to hook into most 5.56mm AK rifles. There was also a brand-new .22 LR training rifle based on the Beryl rifle, possibly offered to the Army for basic firearms course training.

New Czech Army Rifle and SMG Displayed

Of the foreign premieres, those most interesting were centered at the booth of the Warsaw-based MK Szuster company. Mr. Krzysztof Szuster, the proprietor, has a long history of representing hunting rifles and scope manufacturers in Poland (including Blaser, Krieghoff, SIG-Sauer, CZ, Zeiss and Schmidt-Bender), but also ventures into the military market representing the brands’ military lines, as well as Accuracy International and Colt of Canada. This year his booth showcased the SIG 516/517 (true AR) system, but the really exciting and new items there were the new Czech military long arms with old names:, the CZ 805 Bren and the Scorpion 3A1 9mm SMG.

The CZ 805 won the controversial Czech Army rifle tender in February, 2010, and is as of this writing (December 2010) in series-production, with first units already delivered to the Czech Army’s Rapid Reaction element. It is another Central European iteration of the modular rifle concept available in three different barrel lengths (Combat Rifle, CQB Automatic Carbine and DMR) and intended to be chambered in three principal calibers: 5.56×45 NATO, 6.8mm Rem SPC and 7.62×39 Russian. The CZ 805 Bren A1, displayed in Kielce, was a 5.56mm Combat Rifle. So far, only the 5.56mm system is manufactured but the first prototypes shown in 2008 were of the 7.62mm version. The caliber-changing kit consists of a barrel, bolt head and interchangeable magazine-well of the lower receiver (somewhat akin to the MGI Hydra concept). There are three different magazine-well adapters so far, two for 5.56/6.8 magazines (one takes a CZ proprietary plastic clip interchangeable with HK G36 and the other holds the AR magazine, and a third one is for the plastic 7.62mm magazine that is not interchangeable with the vz.58 rifle.

Just as the 805 has nothing in common with its great World War II-era namesake – the joint Czech-British-designed Bren LMG – so is the Scorpion. There is no overlap whatsoever between the new Scorpion and the former trademark small Czech SMG, be it in original .32 ACP caliber or the recently revived 9mm Luger variant. This is a hi-tech polymer-receiver SMG, like the HK UMP, but more along the lines of the MP5 but rather handier, shorter, better balanced and fitted with a much better stock. Atypically, this is not a CZ in-house design – but probably the first license built weapon there since the vz.24 Mauser 98 variant, even though still almost domestic. The new Scorpion, first known as LAUGO, was designed by Slovak engineer Mr. Jan Lucansky, then brought over to CZ and finalized. This is a very simple closed-bolt, hammer-fired blowback design, with just one movable part – the bolt, but still featuring a fully-ambidextrous 4-way fire control group (safe, single, burst, fully automatic), bolt hold-open device with an external release lever, as well as a pistol grip movable in a horizontal plane to adjust the trigger reach.

Rosomak

Polish-built, Finnish-designed KTO Rosomak (Patria Oy AMV) proves its mettle successfully in Afghanistan, spawning still new models and modifications with various specialist equipment, including amongst others a casevac and self-propelled automatic mortar vehicles. Rosomak, much maligned when first purchased, eventually proved itself one of the most successful licenses ever implemented by the Polish defense industry.

The Rak is a Polish-designed 120mm automatic mortar turret system capable of being fitted to multiple tracked or wheeled chassis. Last year its prototype was displayed on the MPG tracked carrier. This year, the first series-manufactured system was installed in a Rosomak, giving a Rosomak-carried mechanized infantry a bigger punch with a 15 km reach.