AK-12 Receiver Options

On any Polish- or United States-manufactured 74 stamped blank or receiver, Childers Guns now offers the options needed for an AK-12 build, including two styles of selector markings. This, with its existing options, allow for an accurate AK-12 build on Childers Guns’ robust receivers. Price depends on stamping, extra options or engravings.

MSRP: $150+

childersguns.com

CHILDERS GUNS

FCG Drill Jig

Childers Guns’ reusable FCG drill jigs are designed to hold blanks for precise, repeatable drilling of all FCG holes, providing clearance for any installed center support or reinforcement plate and bulged receiver.  Unlike layout guides, these encase the entire blank, and hardened inserts keep the drill bits aligned during the drilling operation. Only minor hand filing is required after use. These  fixtures are designed to work with Childers Guns’ blanks and come packaged with all the drill bits and the Allen key needed. Users will still need their own parts kit and blank, some small hand files and something to drill the holes with

MSRP: $149.95

childersguns.com

DOUBLESTAR

Ace LTD Billet Triangle AK Skeleton Stock

The Ace LTD Billet Triangle AK Skeleton Stock is a precision-machined triangle AK stock. The time-tested design of the old, stamped triangle AK-47 stock has been revamped, beefed up and introduced in billet and modular to work with any Ace LTD receiver block or folding mechanism. A ruggedly textured buttplate prevents slipping, and there is a non-rotational QD sling swivel pocket on either side.

MSRP: $99.99

doublestarusa.com

DOUBLESTAR

Ace LTD FSM-S Steel Folding Mechanism

The Ace LTD FSM-S is stronger- and thinner-profiled than DoubleStar’s original FSM. Machined from 1018 CRS steel, case-hardened RC 62 and is finished with Nitride coating, the FSM-S is a rock-solid option to add the ability to fold the stock on your project. The FSM-S is designed to be used with Ace LTD receiver blocks and stocks, but the FSM-S will work with many other manufacturers.

MSRP: $84.99

doublestarusa.com

IMPERIAL ARMS

MK-762

Two of the biggest gripes about AKs are the sights and the lack of a rail to easily install an optic. Imperial Arms has built the MK-762, a modernized Kalashnikov with the traditional AK feel and look. Moving the rear sight to the dust cover like a Krinkov and adding a rail to rear sight block opens up so many more options. Combined with a front-sight / gas-block combo, Imperial Arms’ CROWN muzzle device and Imperial Arms’ XT1 (extended charging handle) round out this rifle into a nice blend of both old and new world quality.

MSRP: $1499

imperialarmsllc.com

BANSHEE™ 300 Mk17

CMMG’s newest offering in 9mm, the Mk17. Utilizing CMMG’s patented Radial Delayed Blowback operating system, the Mk17 is a reliable and soft-shooting pistol caliber AR that is fed from SIG SAUER M17/P320 magazines. The Mk17 is available in CMMG’s short-barreled line of BANSHEE pistols and SBRs, as well as the full-length line of RESOLUTE carbines.

MSRP: $1,599.95

cmmginc.com

CZ-USA

Bren 2 Ms Carbine

Based on the select-fire Bren 2, the handy Bren 2 Ms Carbine operates via a short-stroke, gas-piston system with a return spring contained within the action itself. Without the need for a buffer tube, it features a folding, adjustable stock. At 35.6-inches long, folding that stock brings its length down to just 28 inches, making it much easier to transport or store.

MSRP: $1,999
cz-usa.com

CZ-USA

Bren 2 Ms Pistol 5.56

The next generation of the Bren, the Bren 2 Ms makes its first landfall in the U.S. in pistol form with multiple barrel lengths and two chamberings. Whereas the 805 Bren was designed to a specific set of requirements set out by the Czech military, the Bren 2 is a clean-sheet design. With a bevy of changes, the most noticeable is sure to be the strict weight-loss regimen that the Bren 2 has undergone. With a trimmed-down aluminum receiver and a lower made from carbon fiber-reinforced polymer, the result is a robust but substantially lighter gun.
MSRP: $1,799
cz-usa.com

DoubleStar

Big Timber Brake

The evolution of the AR-15 has made the longer, free floating handguard standard operating equipment. The Big Timber Brake was designed to not only be an outstanding compensator but also to eliminate the gap between 15-inch handguards and 16-inch barrels. This brake is counterbored .75 inch, allowing the brake to slide over lightweight and HBAR-sized barrels and make a beautiful, seamless transition between the handguard and muzzle while virtually eliminating muzzle climb. Available in 1/2×28 TPI and 5/x24 TPI.

MSRP: $84.99

doublestarusa.com

DoubleStar

Stronghold Pistol Grip

The Stronghold Pistol Grip for AR-15 was designed for those who like to customize their firearms. Constructed from billet aluminum and G10, this pistol grip provides a sturdy base with the option to interchange textured, colored G10 panels. Texturing on the panels provides style and functionality. Four colors are now available plus M-LOK G10 panels for your handguards. Watch for new colors and textures in the future!

MSRP: $99.99

doublestarusa.com

German Precision Optics

SPECTRADot® Red Dot Scope

The SPECTRAdot® Red Dot Scope is designed to meet the needs of tactical shooters who require rapid target acquisition. This high-quality, lightweight and compact red dot scope is ideal for any AR rifle, offering a mount that mates with both Weaver- and Picatinny-style rails, precision ½ MOA windage and elevation click adjustments and IPX 7 sealing. The red dot brightness measuring 3 MOA also enables the use of the SPECTRAdot™ in a variety of lighting conditions, with six daytime and five nighttime settings.

MSRP: $399

gpo-usa.com

Robinson Armament Co.

XCR-L

The XCR-L offers the best placement of manual controls, a piston-driven, gas adjustable, frictionless, heavy-duty bolt, a heavy-duty extractor and solid ejector and a monolithic upper receiver for alignment of all accessories with the bore. It has a quick-change barrel for caliber and configuration changes and folding stock adjustable for length and height. The XCR-L accepts standard AR-15 magazines, grips, sights, etc. Available in and convertible to 5.56, .300 BLK, 7.62×39, 6.8 SPC, 6.5 Grendel, .224 Valkyrie and 5.45×39. Barrels available from 7.5 inches to 18.6 inches.

MSRP: $1,995 (base price)

robinsonarmament.com

Robinson Armament Co.

XCR-M

The XCR-M offers great placement of manual controls and a piston-driven, gas adjustable, frictionless, heavy-duty bolt, a heavy-duty extractor and solid ejector and a monolithic upper receiver for alignment of all accessories with the bore. It has a quick-change barrel for caliber and configuration changes and a folding stock adjustable for length and height. The XCR-M accepts SR-25 pattern magazines and AR-10 grips, sights, etc. Available in and convertible to .308, 6.5 Creedmoor, 260 Rem., and .243 Win. Barrels available from 9.5 inches to 20 inches.

MSRP: $2,495 (base price)

robinsonarmament.com

Samson Manufacturing

True Back-up Sight Package

Since these were never meant to be the primary aiming system, Samson did away with the dual apertures and went with a single .160 aperture which is small enough for accurate shooting yet large enough to still be of use in low light. Accepts all aftermarket front sight post replacements with MIL-SPEC dimensions. Both front and rear sights lock in the folded and deployed position and attach to any 1913 Picatinny rail.

MSRP: $86.46

samson-mfg.com

Samson Manufacturing

Vertical Grips

Samson’s Vertical Grips are available in two styles, Standard and Grenade, with either M-LOK, KeyMod or Evolution attachment plates. The two-piece design allows you to remove the grip while leaving the attachment plate in place. The grips are made of solid aluminum and stainless steel for unmatched durability and come in three lengths: short, medium and long. Samson also offers M-LOK, KeyMod or Evolution replacement attachments. All replacement attachments will fit all styles of Samson Vertical Grips.

MSRP: $51.00–$59.00

samson-mfg.com

LYMAN

Pachmayr Knives

Pachmayr, a Lyman Products brand, is proud to announce their new line of Every Day Carry (EDC) knives for sportsmen, shooters, professionals and law enforcement. The line consists of six different knives for various uses and carry styles. The Dominator, at the top of the product list, is the largest knife at 8.5 inches in overall length with a modified sheepfoot fixed blade and G10 handle with a Kydex sheath and belt clip. The Grunt features a stainless-steel liner and cleaver blade style with an overall length of 7.75 inches. The Snare is a compact folding drop point blade with a stainless-steel liner. The Grappler is an 8-inch drop point blade with a black stonewash finish and G10 handle and stainless-steel liner. The rosewood colored renegade wood handle of the Griffin folder is an elegant and affordable drop point blade with a stainless-steel liner. Finally, for those looking for an EDC with a tactical edge, the Blacktail features a 6.75-inch drop point black coated blade with a black aluminum handle and stainless-steel liner. lymanproducts.com

SMITH & WESSON

Performance Center M&P 9 SHIELD M2.0

The Performance Center is excited to offer the M&P SHIELD™ M2.0™ pistol now with a longer 4-inch barrel, HI-VIZ front and rear fiber optic sights and Performance Center tuned action. Models with a slide cut for optics come with a red dot, delivering a slim, red dot ready concealed carry pistol. Available in 9mm, .40 S&W and .45 AUTO. Additional models available with ported barrel and slide. smith-wesson.com

DOUBLESTAR

STAR10-P .308 Pistol

Whether it’s varmint control or self-defense, the .308 powered STAR10-P has the power one needs to stop the threat. The new .308 powered STAR10-P features the new Stronghold Pistol Grip. The STAR10-P is designed with the power one needs for varmint control or self-defense. Built with the same billet upper and lower as the original STAR10 rifle, the STAR10-P puts that power in a very manageable package. With features like the Strongarm Pistol brace and Stronghold Pistol Grip, the STAR10-P takes AR Pistols to the next level. doublestarusa.com

TANDEMKROSS

TandemKase Pistol Bag

Made for comfort, design and peace of mind, the TandemKase Pistol Bag provides purposely placed, bright [TK] green chevron arrows to indicate muzzle direction when bagged, allowing for safe opening downrange. Ideal for Steel Challenge, Rimfire Challenge, SASP match or anytime at the range. The three-sided double zipper allows the case to lie flat when fully opened. The padded interior protects your pistol’s finish; you will never have to place your firearm on a rough, unprotected surface again. tandemkross.com

XS SIGHTS

3-Dot RAM Night Sights

The RAM (radioactive material) night sights have a traditional 3-dot tritium, notch and post-sight picture. The rear sight is blacked out to increase contrast against the front sight which is available in bright orange or green. The front sight features XS’s proprietary Ember™ Glow Dot technology which absorbs ambient light and glows in low light. The front tritium lamp in the RAM sight charges the Ember Glow Dot, making the front sight glow brighter than the rear, keeping one’s focus down range.
xssights.com

SAVAGE

110 Prairie Hunter

The 110 Prairie Hunter unleashes the full power and accuracy of 224 Valky-rie. Its AccuFit system makes it easy to customize comb height and length-of-pull to any hunter. Combined with its user-adjustable AccuTrigger, 22-inch button-rifled barrel and target crown, the rifle delivers the most consistent accuracy at extreme ranges. The 110 Prairie Hunter features a threaded muzzle, synthetic stock with a beavertail forend, three QD studs and a detachable box magazine.
savagearms.com

ADVANCED ARMAMENT CORPORATION

Ti-Raid 30

For optimum accuracy choose direct thread, but for quick set-up and tear-down choose fast-attach mount.  Excellent for hunting and fun on the range. Tool-less take down and shielded baffles deliver unsurpassed performance and ease of maintenance. PVD coatings are on the silencer tube and mounts. The most versatile silencer you can own. Any caliber .300Win Mag and below can be used with the new Ti-Raid 30 Silencer, making it a must have for multiple suppressor-ready firearms. advanced-armament.com

MARLIN FIREARMS

336 Curly Maple Rifle

The Model 336 is an icon of the deer woods and one of the most popular hunting rifles of all time. It is now available with a beautiful curly maple wood stock.
marlinfirearms.com

REMINGTON ARMS COMPANY

Model Seven SS HS Precision Stock

The Model Seven puts game-dropping precision and power in a fast-han-dling platform perfect for blinds, tree stands and covering ground on foot. Weighing in at only 6 pounds, the Seven SS HS features stainless steel barreled actions with a satin finish and a rock solid HS Precision stock with an aluminum bedding block.
remington.com

PRIMARY ARMS

Silver Series 1-6x24mm SFP Rifle Scope Gen III

The 1-6×24 second focal plane scope features our patented Advanced Combined Sighting System reticle. Bullet drop compensation, wind holds, moving target leads and range estimation are seamlessly integrated into an instinctive sighting system that is very fast from 0 to 300 yards and very accurate from 300 to 800 yards. The second focal plane design keeps the reticle the same size at all magnifications for quick acquisition at low power and advanced reticle functionality at 6x maximum power. Silver-tier rated by the NTOA! primaryarms.com

GEMTECH 

.22LR 42gr Match Subsonic 

Optimized for use with a suppressor, Gemtech .22 Long Rifle Ammunition is the perfect choice for the peaceful plinker. With a premium heavy 42-grain lubed lead bullet and clean burning powder, Gemtech .22LR ammunition delivers consistent 1020 fps subsonic velocities, hard hitting performance and match grade accuracy. Sold in 500-round bricks or 5,000-round cases. 

MSRP: $7.00 per 50rd box • Where to buy: Gemtech.com and Gemtech dealers nationwide. 

VIBRA-TITE

Hot-Lock Threadlocker 

Vibra-Tite Hot-Lock is a medium–high strength, ceramic-based thread locker which exhibits unparalleled temperature resistance up to 2000°F and excellent performance across many different substrate finishes. 

Hot-Lock Extreme Temp Threadlocker will lock threaded barrel devices in place at temperatures where standard thread lockers would disintegrate. In addition to handling extreme heat, Hot-Lock resists vibration to keep those parts locked in place, round after round. 

Whether you compete or just plink, keep your firearm in good working order. 

MSRP: $15.00 • Where to buy: amazon.com 

FEDERAL 

350 Legend 

Blow the doors off straight walls. The new 350 Legend offers higher velocities than any straight-wall deer cartridge, with significantly less recoil than 450 Bushmaster in a compact, maneuverable platform. It’s an ideal fit for both MSRs and bolt-action rifles, penetrates deep and delivers ample energy to take down any buck. Federal has harnessed all the 350 Legend has to offer with three new loads in our Fusion, Power-Shok and Non-Typical lines. All get peak accuracy and terminal performance from the round thanks to consistent bullet designs that expand reliably at 350 Legend velocities. 

MSRP: Starting at $26.95 • Where to buy: federalpremium.com

SPEER 

Gold Dot G2 

The next generation of protection has arrived. Previously only offered to law enforcement, Speer Gold Dot G2 offers the ultimate performance for self-defense thanks to an exclusive nose design. Instead of a large hollow-point cavity, Gold Dot G2 has a shallow dish filled with a high-performance elastomer. On impact, the material is forced into engineered internal fissures to start the expansion process. The result is extremely uniform expansion, better separation of the petals and more consistent penetration across barrier types through full-size handguns. 

MSRP: Starting at $28.95 • Where to buy: speer-ammo.com

CCI 

Clean-22 Pink 

Keep your rimfire running cleaner and help fight breast cancer with new CCI Clean-22 Pink. A portion of the proceeds from every box sold goes directly to the effort to find a cure. Like other Clean-22 loads, its exclusive polymer bullet coating greatly reduces copper and lead fouling in the barrel—without leaving a residue. It also cuts lead buildup in suppressors 60 to 80 percent and comes in a 400-round bulk bottle that’s perfect for long days at the range. With dependable CCI priming and consistent propellant, Clean-22 Pink provides flawless cycling through semiautomatics and all .22 LR firearms. 

MSRP: $29.95 • Where to buy: cci-ammunition.com 

CHIPOTLE PUBLISHING, LLC 

1-Year Subscription to Small Arms Review 

The ultimate Small Arms Resource on industry practices, historical archives, new products, legal issues and breaking news. The 10-Issue Subscription comes with free online access to articles and content 

MSRP: 39.95 • Where to buy: smallarmsreview.com 

ALIEN GEAR 

Cloak 3.5 IWB Holster 

The sophistication of Alien Gear’s enhanced Cloak 3.5 IWB Holster can’t be comprehended until you experience the soft backing and perfect retention for yourself. It’s an experience not to be missed. Two adjustable clips securely attach to your belt, while a CoolVent Neoprene backing comfortably and flexibly conforms to your body. A custom-molded shell securely retains the firearm while properly protecting your trigger guard. You’ll want to treat your firearm to this masterful creation. 

MSRP: Starting at $49.88 • Where to buy: aliengearholsters.com 

CHIPOTLE PUBLISHING, LLC 

The U.S. M14 Rifle: The Last Steel Warrior (2nd Edition) 

Now in hardback format, the second edition of this classic work is now expanded to 430 pages and includes new information from recently discovered government documents and numerous color photographs. What’s included: Prototypes and production M14 rifles and their commercial semiautomatic counterparts, contractors, subcontractors, experimental models, match and sniper rifles, modern M14 rifles, training, magazines, parts and accessories, ammunition, maintenance and more! 

MSRP: $69.95  Where to buy: smallarmsreview.com

STREAMLIGHT, INC. 

Streamlight ProTac 90 

At just 3.75 inches, the ultra-compact ProTac 90 is a super-bright, right-angle tactical light that delivers up to 300 lumens and a 1.5-hour run time on high. The light features a 90-degree head and a multi-function clip designed for hands-free options, which fits MOLLE and other gear. The light’s proprietary TEN-TAP® programming allows for three modes: high/ strobe/low; high only; or low/high. The ProTac 90 features convenient multi-fuel technology with three battery options: CR123A lithium battery, AA alkaline or AA lithium battery. 

MSRP: $68.00 Where to buy: streamlight.com 

DTLGEAR 

Bleeding Control Kit 

Our Bleeding Control Kit (IFAK) is a much needed item for your range bag, car, ATV, or to have anytime you’re in the field. Accidents can happen anywhere, and a person can bleed out and die within 2 minutes. The kit includes a SWAT-T or SOFTT-W tourniquet, chest seals, CPR mask and more needed to save a life. 

MSRP: $79.95 • Where to buy: dtlgear.com 

HACKETT EQUIPMENT 

Little Bertha 2 Pistol Range Backpack 

Don’t let the name fool you … The Little Bertha 2 Pistol Range Backpack is not little, and it is not just for the range. This is your everyday gun bag for the range, work and travel. It has two pistol holsters, spots for eight magazines, eight ammo box pouches and compartments for the rest of your gear. It comes in Coyote Tan and makes a perfect front seat companion. The backpack comes with a Lifetime Warranty. 

MSRP: $79.99 • Where to buy: hackettequipment.com 

DOUBLESTAR 

Ahab Fixed Blade Knife 

This everyday carry knife was designed to be discrete and compact without sacrificing relevance. Elements like the oversized ring and precision thumb break provide the best amount of retention for quick deployment. The Ahab’s strong, lightweight construction makes it the perfect duty belt utility that will be there when you need it most. The Ahab is made from 1084 Carbon Steel and includes a kydex sheath and Safe-Lock belt clip. 

MSRP: $84.99 • Where to buy: doublestarusa.com 

BIGFOOT GUN BELTS 

Suspenders 

Bigfoot Gun Belts Suspenders are beefy, brawny but classy. Straps of rich English Bridle leather, in black, brown or tan, with elastic back straps create the perfect fit. Large and small suspender clips are included, but additional clip styles are also available, including belt hooks, trigger snaps and button tab attachments so you can customize your experience. Bigfoot Suspenders are built strong but make an elegant appearance. Business or outdoor styles are available! 

MSRP: Starting at $85.88 • Where to buy: gunbelts.com 

FEDERAL 

Syntech Bulk Bucket 

There’s never been a better way to have an epic day at the range. All-new Syntech Bulk Buckets boast 250 to 500 rounds packed in rugged plastic buckets that stack, store and transport easily. The one-of-a-kind TSJ® projectile uses a polymer jacket to eliminate metal fouling and drastically reduce damaging barrel heat and friction. The bullet style also minimizes splash-back on steel targets. Its exclusive Catalyst™ primer provides hot, reliable ignition without the use of lead. 

MSRP: Starting at $96.95 • Where to buy: federalpremium.com 

ALIEN GEAR 

ShapeShift Core Carry Pack 

You have what it takes to become a master shapeshifter, and we have what you need to experience concealed carry perfection. Introducing the ShapeShift Core Carry Pack. This transformative system equips you with everything you need to seamlessly transition between four distinct concealed carry positions. From IWB to OWB to appendix carry, you’ll be efficiently and effortlessly carrying how you want, when you want. We invite you to become a master shapeshifter today. 

MSRP: Starting at $99.88 • Where to buy: aliengearholsters.com 

DTLGEAR 

First Aid Kit 

Our high-quality First Aid Kits are designed by and for shooters / sportsmen. It includes a complete IFAK kit for major situations including SWAT-T or SOFTT-W tourniquet, chest seals and CPR mask. It also includes items needed for minor emergencies including adhesive bandages, eyewash, compression bandages, gauze, tape, splinter removal tools and more. Weighs just 1 pound, 14 ounces. 

MSRP: $99.95 • Where to buy: dtlgear.com 

DOUBLESTAR 

Stronghold Pistol Grip with G10 Panels 

DoubleStar has taken pistol grips to the next level by combining durability and customization in one awesome package. Introducing the Stronghold Pistol Grip. This innovative design utilizes a lightweight, anodized aluminum frame and customizable textured G10 grip panels. The palm swell provides a secure but comfortable surface for the shooter’s hand even in gloves. The high-quality U.S.-made G10 panels round out the package with rugged style. Available in Black, Red, FDE and Gray. 

MSRP $99.99 • Where to buy: doublestarusa.com 

CONCEALED CARRIE 

Compacts 

In direct response to their valued customers, Concealed Carrie offers fashionable compacts and matching cross body chains, the perfect accessory to your handgun. Stay organized and protected with Concealed Carrie’s Compacts. The double-sided design acts as a wallet on one side while keeping your firearm separate and secure on the other. The zippered main compartment is full of dividers for currency, credit cards and personal items. The adjacent double-zippered Hook-and- Loop-lined firearm compartment safely stores your handgun. 

MSRP: Starting at $109.00 (Chain sold separately for $15.) Where to buy: concealedcarrie.com 

SPYDERCO 

Endela

Sized to literally split the difference between Spyderco’s iconic Endura 4 and Delica 4 Lightweights, the Endela offers all the highly refined features of each in the perfect “in-between” format. Its full-flat-ground blade is crafted from VG-10 stainless steel and sports a fully accessible Trademark Round Hole for ambidextrous one-hand opening. Available in either PlainEdge or SpyderEdge, the blade is supported by a sturdy back lock, skeletonized stainless steel liners and injection-molded, fiberglass-reinforced-nylon (FRN) scales. 

MSRP: $123.00 • Where to buy: spyderco.com 

GEMTECH 

22 QDA 

Add quick-detach capability to all ½-28 threaded .22LR and .22Mag rimfire suppressors. The Gemtech 22 QDA (Quick Detach Adapter) system includes a four-lug muzzle device, threaded ½-28 for use on all standard rimfire threaded barrels, a quick-detach mount that threads into the rear of the suppressor and an installation wrench. Swap rimfire suppressors between host firearms in seconds with this fast and secure mounting system. 

MSRP: $130.00 • Where to buy: Gemtech.com and Gemtech dealers nationwide 

TACTICA 

Concealed Carry Sweater 

Your concealed carry wardrobe deserves a revival, especially if your clothes get in the way of your draw. Our Concealed Carry Sweater understands your pain and was expertly designed to solve your concealed carry problems. Made of 100% Merino Wool, this ultra-soft sweater not only keeps you warm, but deeply conceals your firearm. With two ambidextrous faux draw-through pockets, you’ll be able to draw from your corset or belly band holster in seconds. 

MSRP: Starting at $149.99 Where to buy: tacticafashion.com 

KELTEC 

KelTec P17 .22LR 

At less than 14-ounces fully loaded, the KelTec P17 .22LR is easy to handle for almost anyone. Add its threaded barrel, Picatinny-style accessory rail, ambidextrous controls, three 16-round magazines, and this package offers a value far greater than its MSRP. Thanks to its excellent trigger, fiber optic front sight and adjustable rear sight this innovative, new KelTec pistol not only burns bullseyes, but it builds confidence on a budget. 

MSRP: $199.00 • Where to buy: Local dealer 

MANTIS 

Mantis X10 

The Mantis X10 is the next evolution of the original MantisX. The X10 features a completely redesigned hardware set and powerful algorithms that give users real-time feedback on their shooting performance. The X10 features a RecoilMeter, holster draw analysis and other dynamic shooting analyses and feedback. 

MSRP: $250.00 • Where to buy: mantisx.com

SPARTAN BLADES 

Spartan-Harsey Dagger 

Designed by prolific knife designer William W. Harsey, Jr., the Spartan-Harsey Dagger was designed as a real-world combat dagger. Based on Mr. Harsey’s extensive experience working with Special Operations Forces, he has developed what many believe to be the epitome of what a combat dagger should be. Its timeless design is matched only by the use of premium U.S. materials which include: S35VN, double-deep cryogenic treatment, pressure tempering and full tang construction making for a knife that will most assuredly become an American classic. 

MSRP: Starting at $390.00 • Where to buy: spartanbladesusa.com 

MEPROLIGHT 

MEPRO Micro RDS and Picatinny QD Rail 

The MEPRO MicroRDS, is a small, rugged, energy-efficient, electro-optical red dot sight designed for handguns, shotguns and rifles with a large display window and a clearly defined red dot for fast target acquisition with both eyes open. The MicroRDS Kit includes a patent-pending dovetail adapter with a quick detach mechanism that allows mounting and dismounting the MicroRDS on the gun with a click of a finger. The adapter includes high-quality Meprolight Night Sights that allow accurate and fast shooting under any lighting conditions when the MicroRDS Optic is removed. Meprolight just introduced their MicroRDS Optics- Ready-Guns QD rail plate for GLOCK, Smith & Wesson M&P pistols and the new IWI MASADA pistol. 

MSRP: $440.00 • Where to buy: meprolight.com 

ADVANCED ARMAMENT CORPORATION 

Jaeger 30 

A high-performance Suppressor built with AAC’s industry-leading efficiency, which allows us to deliver what every hunter and the game they pursue deserve: superior suppression, great accuracy and rifle control, all at an affordable cost. 

MSRP: $449.00 Where to buy: advanced-armament.com 

STREAMLIGHT, INC. 

TLR- 8 G 

Featuring an “eye-safe” green aiming laser visible in daylight, the TLR-8 G is a compact rail-mounted tactical light designed for maximum visibility and long-range targeting. The light features three modes, including Laser-only to keep the light on target; LED-only for 500 lumens of bright, focused light; and Dual Mode, which combines the laser and LED. With a low-profile ambidextrous switch to protect hands from gun muzzles, the TLR-8 G is easily mounted to a wide range of weapons. 

MSRP: $450.00 • Where to buy: streamlight.com

IWI 

MASADA 

The MASADA takes user preferences to a new level, with each feature carefully selected based on input from military, law enforcement and gun enthusiast alike. The MASADA was engineered to endure all elements while maintaining IWI legendary attention to detail and reliability. 

MSRP: $480.00 • Where to buy: iwi.us 

CZ-USA 

457 Lux 

Designed in the European style, the 457 Lux has a hogback stock fashioned from Turkish walnut. With a cheekpiece and comb ideal for use with its crisp iron sights, this 457 is one classy plinker. Like all 457s, it has an 11mm dovetail for mounting optics and can be quickly and easily swapped to a different chambering with the addition of a second barrel set to include .22WMR and .17HMR (sold in our webstore). One 5-round magazine is included. 

MSRP: $499.00–$522.00 • Where to buy: cz-usa.com 

SPYDERCO 

Respect 

Designed by Spyderco founder Sal Glesser, the Respect represents his personal interpretation of the classic American Bowie Knife. Its dramatic clip-point blade is made from 300-inch-thick CPM 154 stainless steel and has a broad profile for exceptional edge geometry. The two-piece handle is machined from solid G-10 slabs and seamlessly attached to the concealed tang with oversized Torx screws. A knife truly worthy of its name, the Respect comes complete with a handcrafted leather sheath. 

MSRP: $560.00 • Where to buy: spyderco.com 

SMITH & WESSON 

M&P9 M2.0 4” Compact Flat Dark Earth 

The award-winning Smith & Wesson M&P 9 M2.0 Compact 4-inch Pistol is now available in the desirable Flat Dark Earth (FDE) color. The M&P 9 M2.0 Compact pistol is purpose-built for personal and professional use and features a Cerakote FDE slide, polymer FDE frame and the enhanced M2.0 feature set. Available with or without an ambidextrous thumb safety, the M&P9 M2.0 Compact 4-inch pistol comes standard with a white-dot front sight and a white two-dot rear sight, a capacity of 15+1 rounds and ships with two magazines, including two magazine extender sleeves for use with full-size magazines. 

MSRP: $569.00 • Where to buy: smith-wesson.com 

MEPROLIGHT 

MEPRO Foresight 

Meprolight introduces the first augmented reality (AR) weapon sight that uses real-time data or is used in conjunction with the MEPRO Foresight Mobile App (Android and IOS Bluetooth interface). It has 5 preset reticles, digital zeroing, a built-in compass, leveler and real-time projected data right on the transparent optical lens to keep the user informed at all times. The Foresight also features a built-in sensor for automatic brightness adjustment and a rechargeable battery using a USB. The mobile app provides for constant firmware updates and additional features including storing profiles and the ability to load a preset zeroing profile from the app. The large viewing window allows the user to keep both eyes open for increased situational awareness. 

MSRP: $714.00 • Where to buy: meprolight.com 

TRIJICON 

SRO 

The Trijicon SRO (Specialized Reflex Optic) is specifically designed for pistol use. The wide field of view and clean, crisp dot makes it easy for users to find and track the dot in both target and competitive shooting applications. Every SRO features both manual and automatic LED brightness modes. Additionally, a top-loading CR2032 battery provides a 3-year battery life (at setting 4 of 8). These features make the SRO a great choice in any application.

MSRP: $749.00 • Where to buy: trijicon.com 

MARLIN FIREARMS 

336/1895 Marlin Dark Series Rifles 

The speed and accuracy of Marlin lever actions, blacked-out and tricked out for the modern hunter. Our new Dark Series rifles feature a stealthy-tough black matte parkerized finish and a black-webbed hardwood stock, with a host of performance enhancements, including a threaded barrel, big-loop lever and XS Lever Rail with ghost-ring peep that also accommodates a wide variety of optics. 

MSRP: $949.00 • Where to buy: marlinfirearms.com 

REMINGTON ARMS COMPANY 

V3 Tactical Shotguns 

New for 2019 the V3 tactical line of shotguns are designed to offer a new generation of home defense shotguns to the market. Utilizing the patented Versaport gas system and the V3 platform design we are able to offer lightweight, soft shooting and utter reliability. All tactical models feature the enhanced ergonomic features of our pro series field guns and make this the ultimate home defense shotgun for the 21st century. 

MSRP: $1,095.00 • Where to buy: remington.com

WINDHAM WEAPONRY 

20-inch A1 Government Rifle 

Windham Weaponry’s new 20-inch A1 Government has the original A1 look and feel but is built to shoot with modern conveniences. The A1 upper includes a brass deflector and teardrop forward assist. The rifle-length handguard has an A1 delta ring. The 20-inch barrel with a 1-in-7 twist includes an A1 flash suppressor. The A2 stock includes a trapdoor storage compartment. Every rifle comes with Windham Weaponry’s transferable lifetime warranty. 

MSRP: $1,160.00 • Where to buy: Through your local dealer 

BLACK RAIN ORDNANCE 

Patriot-America Rifle 

Black Rain Ordnance has made a promise to make your firearm exactly that, your firearm. With the addition of the Spec + Series, you have over 100 different build configurations and 21 different finish options to choose from. If you are looking to add something special to your arsenal, without breaking the bank, the all new Black Rain Ordnance Spec + Series would be a good choice for you.

MSRP: $1,199.00 • Where to buy: blackrainordnance.com 

WINDHAM WEAPONRY 

.450 Thumper Pistol 

Windham Weaponry’s .450 Thumper pistol has become widely popular for people looking for a firearm to combat feral hogs. The pistol is chambered for the .450 Bushmaster round. It includes a 9-inch medium profile barrel that is capped with the proprietary Nor’easter muzzle brake and covered by the Windham Weaponry 7-inch, free-float, railed handguard. It is fitted with the adjustable SB Tactical pistol arm brace. Every firearm comes with Windham Weaponry’s transferable lifetime warranty. 

MSRP: $1,254.00 Where to buy: Through your local dealer 

BLACK RAIN ORDNANCE 

Ion 9 

The Ion 9 is a pistol caliber carbine which is fed from Glock-style magazines and operates on a complete billet platform utilizing a patented side-charging, non-reciprocating upper that is mated to a dedicated billet lower with a flared magazine well for quick reloading. With various build options within the Ion 9 series, you are sure to find the best subcompact pistol caliber firearm to fit your needs. 

MSRP: $1,259.00 • Where to buy: blackrainordnance.com 

CZ-USA 

Dan Wesson Vigil Series 

A more affordable entry into the Dan Wesson lineup, the Vigil Series pistols are all built around a forged aluminum frame with a stainless slide. The round-top slide wears a tritium sight on the front and a serrated tactical rear. The frontstrap is checkered 25 LPI, as is the rear that also features a rounded butt for comfortable carry, available in 9mm and .45ACP. With four different models the Vigil can be purchased in Government, Suppressor-Ready, Commander and CCO platforms. 

MSRP $1,298.00 • Where to buy: danwessonfirearms.com 

BARRETT 

MRAD Barrel Conversion Kit 

Barrett Firearms Manufacturing, Inc., the leader in long range, has been awarded a contract from the U.S. Department of Defense to provide an undisclosed number of MRAD rifle systems chambered in a new caliber, 300 PRC. The MRAD’s robust design, user modularity and unfailing accuracy, combined with the new precision rifle cartridge designed by Hornady, offer an unbeatable system for long-range effectiveness. 300 PRC MRAD Barrel Conversion Kits are available on Barrett’s webstore. 

MSRP: Starting at $1,535.00 • Where to buy: store.barrett.net

CMMG 

BANSHEE 300 

BANSHEE 300 Series 10mm rifle. 8-inch barrel, 30-round SGM Tactical Magazine, radial delayed blowback, AR platform—Last round bolt hold open. 

MSRP: $1,649.95 • Where to buy: cmmginc.com / Local retailer 

NIGHTFORCE OPTICS 

NX8 1-8×24 Riflescope 

The NX8 1-8×24 F1 puts the power of an 8x into a compact and lightweight riflescope. Optimized for short- to medium-range shooting. Its daylight visible, center red dot allows the shooter to engage targets with the speed of a red dot sight, but as range increases, its first focal plane reticle provides precise hold points. In close quarters, the NX8™ 1-8×24 provides a wide field of view; a quick turn to 8x allows precision shots. 

MSRP: $1,750.00 • Where to buy: nightforceoptics.com 

IWI 

TAVOR 7 

The all-new TAVOR 7 is the next evolutionary step in the Tavor bullpup family. It is an innovative, powerful and reliable weapon that can be rapidly and easily deployed in all combat situations. TAVOR 7 carries the usual reliability expected of all IWI products with some increased ergonomic features. 

MSRP: $2,099.00 Where to buy: iwi.us 

WEATHERBY 

Backcountry Rifle 

This rifle provides the craftsmanship and quality expected from a Mark V rifle only surpassed by the stunning color combination and true rugged dependability that embodies its name, Backcountry. This model carries many of the same innovative technologies including a carbon fiber stock, 3D HEX recoil reducer, TriggerTech Trigger and Accubrake ST. The Backcountry weighs in at a mere 5.3 pounds built on a 6-Lug receiver. 

MSRP: $2,499.00 • Where to buy: weatherby.com 

WEATHERBY 

Mark V CarbonMark Rifle 

The Mark V CarbonMark is a custom-built, stunningly precise rifle ready for any adventure. This carbon barrel is lightweight, accurate and fast-cooling. 95% of the carbon fiber does not touch the barrel allowing air to foil around the steel and rapidly cool the barrel. If you are looking for a combination of breakthrough rifle performance and rugged reliability this rifle should already be in your gun safe! 

MSRP: $2,499.00 • Where to buy: weatherby.com 

NIGHTFORCE OPTICS 

ATACR 4-16×50 Riflescope 

If there is such a thing as a “professional” riflescope, it is an ATACR. They are designed for military, law enforcement and other tactical professionals … and for those who simply want to shoot like a professional. Shooters who choose the ATACR 4-16×50 will enjoy superb low-light performance, ED glass, extensive elevation adjustment, all housed in a riflescope impervious to recoil from the largest calibers. A range of first focal plane reticles address any shooting environment. 

MSRP: $2,500.00 • Where to buy: nightforceoptics.com 

TRIJICON 

1-8×28 VCOG

The Trijicon 1-8×28 VCOG (Variable Combat Optical Gunsight) is a highly rugged, variable magnification riflescope designed for close-quarter battle (CQB) and long-distance marksmanship. With a forged aircraft-grade 7075-T6 aluminum housing, the VCOG is nearly indestructible. Superior glass provides exceptional clarity and color with zero distortion. The universal segmented circle crosshair dot reticle is designed for multi-platform use, offers 11 user-selectable brightness settings and is powered by a lithium AA battery.

MSRP: $2,800.00 • Where to buy: trijicon.com 

FLIR SYSTEMS, INC. 

Scion PTM 

FLIR Scion PTM packs high-performance thermal imaging into a rugged, IP67-rated handheld monocular. Capable of geotagged video recording and live video transmission, the Scion PTM can instantly stream encrypted thermal footage of any pursuit, evidence recovery or search and rescue effort to the command center via wireless network. A smooth 60 Hz refresh rate and picture-in-picture zoom capture minute details from a distance and maintain peripheral awareness for constant thermal supervision of suspects, team members, and standbys. 

MSRP: Starting at $3,295.00 • Where to buy: flir.com 

FLIR SYSTEMS, INC. 

ThermoSight Pro Series PTS536 

Powered by the breakthrough FLIR Boson core, the ThermoSight Pro Series PTS536 weapon sight sets the standard for thermal detection and classification. Featuring a 12 μm pixel pitch sensor and 50mm lens, the PTS536 delivers brilliant, clean thermal imaging with a focused 4.5° × 3.5° field of view. The entire ThermoSight Pro Series offers an uncompressed video signal, a high-definition display and shot-activated video recording. 

MSRP $3,795.00 • Where to buy: flir.com 

BARRETT 

MRAD Rifle System 

Barrett Firearms Manufacturing, Inc., the leader in long range, has been awarded a contract from the U.S. Department of Defense to provide an undisclosed number of MRAD Rifle Systems chambered in a new caliber, 300 PRC. The MRAD’s robust design, user modularity and unfailing accuracy, combined with the new cartridge designed by Hornady, offer an unbeatable system for long-range effectiveness. 

MSRP: Starting at $6,000.00 • Where to buy: store.barrett.net 

Manufacturers Show Off Their Latest & Greatest in Las Vegas

FOREWARD

A good number of manufacturers offered a brace-equipped pistol version of their rifles at this year’s SHOT Show held January 23–26 in Las Vegas. Having the Hearing Protection Act waiting in the wings, there were a number of suppressors and related products, with the LMT suppressor being an interesting new design. Also prominent were the number of 1-x variable magnification scopes from various manufacturers.

NIGHTFORCE

Nightforce introduced two 1-8x scopes with daylight-bright illumination and true 1x: ATACR and NX8 1-8 x 24 F1. The NX8 has a wider field of view (FOV) than ATACR (35.3m vs. 32.0m) at 100m, while both have the same 4.4m FOV at 8x. In reciprocal, the ATACR has a larger 11.3mm exit pupil at 1x in contrast to the 7.9mm of the NX8. Indeed, the author found the ATACR easier to mount during brief handling at the show.

The ATACR has a 34mm tube and weighs more at 21 ounces in comparison to the NX8 with 30mm tube and 17 ounces. ATACR features capped turrets while the NX8 utilizes exposed turrets. Optically, the ATACR utilizes ED glass while the NX8 shares the same elements as the NXS line. The illumination utilizes diffractive grid technology and is powered by a CR2032 battery that lasts about 130 hours. As of writing, the ATACR is on schedule to ship early spring.

DOUBLESTAR

In addition to their staple line-up of AR-15 parts, upper receivers and complete firearms, DoubleStar introduced the Strongarm pistol brace that fits an AR-15 buffer tube and retails under $100. The arm loop is ambidextrous, and the provided sling stud can be mounted on either side.

LEWIS MACHINE & TOOL

LMT is releasing a short, 7-inch barrel, 40mm grenade launcher with an option for a pistol-grip-only for breeching. This allows users to keep their rifles as light as possible. Its breech is long enough to accommodate the largest of 40mm ammunition.

In addition, the partnership with Laurence Livermore Laboratory bore fruit in the form of an innovative flow-through suppressor. Screwed into standard threads, the muzzle design compresses gases exiting the bore to form a “virtual baffle.” This redirects most of the gases around a longer alternate path to prevent them from “chasing” the projectile. This continuous flow of gases reduces back pressure so that cyclic rate remains constant. Company representatives quoted that this design rapidly vents back to ambient pressure, greatly reducing heat transfer from gas to suppressor body. As such, this design is machine-gun rated and is expected to last the lifetime of a barrel. As part of the testing, LMT subjected the suppressor to a continuous 1,000-round belt from a MK48 with no problems. Lastly, LMT representatives indicated the large exit diameter is designed to mitigate muzzle flash. LMT’s suppressors range from a mere 8 ounces (titanium Confined Space Weapon integral suppressor) to 34 ounces (for 7.62 belt-fed machine guns). Dimensions range from 1.5 to 2.1 inches in diameter and 6.5 to 8.6 inches in length. Most of the suppressors are an over-the-barrel design which minimizes the added length when mounted.

SAMSON

Samson is bringing pistol products to market for the first time in 2018, offering the Pocket Comp, Compact Magwell and Carry Contour +1 Magazine Extension for the Smith & Wesson M&P9 Shield. Pocket Comp, machined from 7075 aluminium, blends with the slide profile to reduce felt recoil. It threads onto a ½ x 28-inch threaded barrel, and the set screws are tightened against a muzzle adaptor to prevent damaging the threads. It functions with the factory recoil spring. While 124gr or heavier projectiles are recommended, 115gr ammunition may work depending on environmental condition and load specification. The patent-pending Compact Magwell requires no gunsmith to install and allows a full firing grip on the M&P9 Shield. It also allows the expended magazine to drop free without shifting one’s grip. Lastly, the Carry Contour Magazine Extension adds one more round to the factory 7- and 8-round magazines while utilizing factory magazine springs. The leading edge forms a finger grove to give additional purchase during one-handed reloads or malfunction clearance.

GEMTECH

Gemtech is bringing back the wipe-based pistol caliber Aurora with a new design. Measuring only 3.4 inches long, 1.125 inches wide and weighing 3.5 ounces, the suppressor features 13.5mm x 1 left-hand threads on one end, with ½ x 28 inch threads on the other end to accommodate many different pistols. The light weight obviates the need for a Nielson device. The polyurethane wipes are optimized for a service life of 30 to 40 rounds of FMJ only, after which the package must be sent back to the manufacturer to “repack” the wipes. The small, light-weight and cost-effective suppressor allows one to protect hearing on a nightstand or duty firearm.

The company is also releasing a rifle caliber Trek II with the same baffles designed to reduce backpressure. This suppressor features an improved mounting surface to reduce weight by roughly 1 ounce while including a pre-drilled hole for permanent attachment to barrel. This relieves the need for an SBR tax stamp if the combination measures over 16 inches long. The Trek II also utilizes a new weldless design that is serviceable at the factory while retaining the iconic Gemtech front cap with 3/8-inch drive socket.

HECKLER & KOCH

In addition to offering new colors for VP9 frames and Crimson Trace modules for both VP9 and VP9SK, HK continues to expand their US manufacturing spaces and staff in Georgia. The company is expected to begin US manufacture of MR556 rifles and HK45 pistols. Continuing the long-standing relationship between HK and B&T, the two companies partnered to launch an HK line of suppressors for the American market. Lastly, HK joined Hogue in releasing a family of knives: 3.25-inch partially serrated Exemplar Folder, 3.375-inch Hadron Automatic and 3.75-inch Karma Response Tool with glass breaker and strap cutter in addition to the partially serrated edge.

FIGHTLITE

For 2018, FightLite offers compact models of their SCR rifle and MCR belt-fed machine gun in both 5.56 NATO and 300 Blackout. The new Raider pistol is a compact pistol version of the SCR, while the MCR Micro has a shortened barrel. Aside from the shortened gas system and handguard, the Micro shares parts with the full-sized MCR. The company has also indicated that an MCR belt hold pawl is in prototype stages.

SCHMIDT & BENDER

Following up on the 1-8 x 24 CC scope, the 1-8 x 24 CC Dual model features an illuminated first focal plane reticle and a daylight-bright dot in the second focal plane. The version for use with Bundeswehr G28 Patrol rifles has a BDC elevation turret and extra 0.2 mil adjustments at either ends of the travel for CQB use. Customers can also opt for turrets with no over-travel and marked in mils only. The scope also features “more tactile clicks” where the “click” takes more effort every 1 mil and at zero windage for low light use.

The aforementioned diffractive grid technology replaces the split-beam prism for FlashDot illumination. The illumination passes through a grid and forms constructive and destructive interference patterns in order to achieve peak amplitude at the eye. This technology is currently featured in the 1-8 x 24 CC Dual, Polar Second Focal Plane reticles and LR reticles.
In the veins of incremental improvement, S&B now offers a magnification throw lever that is compatible with some current scopes and all new models. Future PM models and current 3-20 x 50 Ultra Short plus 5-25 x 56 High Power scopes feature a locking windage turret with a protruding nub to indicate dialing left. The nub is retracted when dialing right. Also on display is a 3-21 x 50 prototype for hunting and competition use with both First and Second Focal Plane options as well as locking turrets.

AIMPOINT

The recently released CompM5 continues to be in the spotlight. The sight has the same 2MOA dot and overall size of the Micro T-2 but utilizes an AAA battery mounted in the same fashion as the CompM4, as well as changing body material to 7075 aluminium. The original Micro T-1 was made of 6061 Aluminium with a 6-in-lb torque spec; the steel screw could strip the threads if misused. The Micro T-2 incorporated a steel Heli-Coil thread insert in the 6061 body to give roughly three repair attempts if the 12-in-lb torque specification were exceeded. The CompM5 changed materials to 7075 Aluminium to maintain the 12-in-lb specification without the need for a Heli-Coil. In addition to the new product, Aimpoint is releasing a limited-run of Micro T-2 sights in Flat Dark Earth.

VORTEX OPTICS

1-6 x 24 Razor Gen II-E reduced weight by about ¼ pound while maintaining the same durability and optical performance of its successful older brother. Different material and lightening cuts in the turret assembly gave the weight savings. Vortex is adding 4-24 x 50 and 3-18 x 44 variants to the Strike Eagle entry-level scope line-up. The new Crossfire Red Dot sight is very reasonably priced and includes a skeletonized mount with two height options. Lastly, Vortex is expanding their target observation portfolio with the Viper HD spotting scopes and Kaibab HD binoculars.

TRIJICON

Released earlier, company representatives indicated that the RMR Type 2 continues to be a strong seller. Optimizing for pistol use, Trijicon strengthened the electronics and battery contact in the Type 2 to sate the fast-growing demand of optics-equipped pistols. In addition, the new 4-16 x 50mm Accupoint bolstered the portfolio of tube scopes with dual fibre optic / tritium illumination.

SIG SAUER

The trend of releasing rifles in pistol form continues with the SIG MCX Rattler, which has a 16-inch overall length when folded and is available in both 5.56 NATO and 300 Blackout. The low profile design features a shaved shell deflector and the more vertically angled pistol grip. The two-position gas regulator can handle suppressor back pressure while the upper can be installed on a standard AR-15 lower with the assistance of a conversion kit.

SIG also debuted the P365 micro-compact pistol featuring a 10+1 capacity and standard night sights. The pistol ships with one flush and one extended magazine, along with modular grips. In addition, a commercial version of the M17 is anticipated for release in the second quarter of 2018.

PATRIOT ORDNANCE FACTORY

Following up the success of their Revolution rifles, POF is releasing the G series Gentlemen’s Slide for Glock 17, 19 and 34 with cutouts to fit the Trijicon RMR. A Glock 43 slide without RMR cutout is soon to be released. Made of 17-4 billet stainless steel and H900 heat treated, it is finished in nitride for protection and durability.

SPYDERCO

Spyderco debuted several new edged tools for 2018. The Warrior Hawk features a faceted front, a spike and a pry tip. It is made of D2 tool steel with a G10 handle. The US-made Shaman folder utilizes a thick CPM S30V blade with a plain or serrated edge option and secures with Spyderco’s patented Compression Lock. The 2.5-inch blade Lil’ Native, employing either a back or Compression Lock, was developed with urban-friendly carry in mind. Lastly, the Sliverax flipper folder has an S30V blade and a carbon fiber / G10 laminate handle.

COMBINED SYSTEMS

The less-lethal-focused company offers grenade launchers and four munitions: aerosol, chemical, impact and flashbang. While the company is best known for its flashbang, it also has the highest injury potential from overpressure and heat in close proximity. The company takes safety seriously and requires customer agencies to have staffs that were trained within the past four years before selling flashbangs. In 2018, Combined System is looking to expand their breeching portfolio, to potentially include 40mm in addition to current 12ga munitions.

KNS PRECISION

Adapting to the increasingly common use of suppressors and red dot sights on pistols, KNS partnered with Dead Air Armaments to develop the Switch Sight. When flipped down to standard height, it remains compatible with standard holsters while completely clearing red dot sight (e.g., Trijicon RMR) view windows. When rotated 90 degrees to increase height, it clears the top of most suppressors while acting as a backup-sight for red dots. This product is currently in prototype phase.

The adjustable AK piston system on display is already in production. Two versions (one or two vent holes) allow users to fine tune for 5.45 x 39mm or 7.62 x 39mm rifles with a rotating sleeve to control gas venting. It is noteworthy that the KNS piston does not require the difficult process of changing gas block. Company representatives indicated that the adjustable piston slows down the rate of fire to achieve better control and reduces “piston pop” to decrease noise by 5 to 8dB when used in conjunction with a suppressor.

TEAM WENDY

Team Wendy is debuting a lower profile EXFIL Ballistic SL helmet that is rated to NIJ Level IIIA. The helmet is lighter by 15% and sports a new rail mount with 1913 rails forward for light, camera, etc. The new EXFIL Ballistic Visor (featuring lens made by ESS, part of Oakley) and Ear Covers (compatible with in-ear communication and hearing protection) guard against fragments and are ready for sale along with the helmet in March.

OHIO ORDNANCE

New from Ohio Ordnance in 2018 is the M249 drop-in Select-Fire trigger group. It follows the same vane as their patented M240 Select-Fire trigger group while boasting multiple patents itself. Also new is the OOW240 Patrol that reduces weight from 28 pounds to under 21 pounds with lightened parts, dimpled short barrel and M4 collapsible buttstock. The bipod was moved from the gas block to an underside rail that can accommodate a foregrip and other equipment. Lastly, the HCAR is being made available as a pistol as well.

AERO PRECISION

Launched at the show is the new R1 Rail. The company representative also mentioned that a serviceable, 30-caliber suppressor to be fully made of titanium is in the prototype stage. While the direct thread version is anticipated first, the end goal is to develop a QD mount compatible with the VG6 line of muzzle brakes.

DANIEL DEFENSE

Adding upon the previously released MK18 pistol, the 10.3-inch barrelled DDM4V7 is now available in pistol form chambered in either 5.56 NATO or 300 Blackout. Equipped with the SB Tactical SOB brace, users can also choose to add a Law Tactical adaptor for a 20.75-inch folded length.

Building upon its Aimpoint Micro mount, Daniel Defense is introducing a 30mm single-ring mount for the likes of Aimpoint Comp M3 and PRO as well as a cantilever mount made from 6061 Aluminium for 30mm and 1-inch scopes. The bottom half of the ring is integral to the mount with torque specifications engraved to remind users.

LEUPOLD

Two Mark 5 HD scopes are new for 2018: 3.6-18 x 44mm and 5-25 x 56mm using 35mm tubes. The series feature a three-revolution elevation turret with 10 mils per revolution, along with physical indicators to prevent users from “being lost in the dial.” In the first revolution, the zero lock protrudes while the pin is flush. The second revolution retracts the zero lock while the pin is still flush. The third revolution keeps the zero lock retracted while protruding the pin. When running the elevation dial across the zero stop, the lock automatically secures the turret at “0.” An extra 1 mil adjustment is included below the zero stop to accommodate point-of-impact shift from suppressor or clip-on night vision. The throw lever gives quick and smooth zoom adjustments and is placed to avoid blocking the rifle bolt handle at maximum magnification.

The new VX Freedom series provide entry level 1-inch scopes, with the 2-7x and 3-9x models being rimfire-specific. Also of note is the new rubber armoured RX2800. The 2800-yard-capable range finder continuously ranges as long as the button is held down.

KINETICS RESEARCH GROUP

Against the backdrop of $1000USD precision rifle chassis, KRG is offering the $350, 2.9-pound Bravo Chassis for short- and long-action Remington 700 as well as Tikka T3. Although the price and specifications differ slightly amongst versions, all feature tool-less adjustable check piece and ship with three spacers for length of pull fitment. The bottom of the stock can be smooth or hooked (for rear bag) by undoing a screw to remove a cover. For bedding, the chassis utilizes an aluminium backbone that runs to the tip of the forend. For feeding, it utilizes the ubiquitous Accuracy International magazines. For now, the chassis is only available for right-handed rifles.

FN AMERICA

Newly available to US law enforcement and military, the SCAR SC is a select-fire 5.56 x 45mm subcompact carbine with non-reciprocating charging handle and telescoping buttstock. Sporting a 7.5-inch barrel, the overall length can be collapsed to 21.1 inches. In addition to the PDW type stock, other options available through FN Herstal for international customers include a helmet version meant to accommodate face shields as well as a standard SCAR stock. FN representative indicated there are no current plans for a commercial semi-auto version or additional stock options for the US market at this time.

On the commercial side, FN is offering an AR pistol version of their popular FN15 chambered in 5.56 x 45mm and 300 Blackout, with a brace available as an accessory for a one-stop-shop. The company is also offering California- and Maryland-compliant versions of the FN15. Lastly, there is a limited run of dual tone FDE & Black for pistols, FN15 Tactical II and M249S.

QUANTICO TACTICAL

The newly available Hunter Data Board builds on the Sniper Data Board (already in operational use) with the addition of a bubble level in the mounting arm. Attaching to the top Picatinny rail of a rifle, it reduces rifle cant and folds out to provide quick Data on Previous Engagement (DOPE) reference while maintaining cheek weld. The company representative described this product as “by snipers, for snipers;” inspiration stemmed from a target escaping while the sniper changed body position to reference his sleeve mounted DOPE card. With the Hunter/Sniper Data Board, the card is inserted into a water resistant holder which velcros to a 6061 Aluminium assembly. This US-made product provides a ready reference while increasing awareness. The Sniper Data Board can be retrofitted with the Hunter arm. The Hunter/Sniper Data Board will be available soon through Quantico Tactical’s extensive GSA Schedule.

GORILLA AMMO

The company offers ammunition with a polymer body and metallic case head to achieve 30% weight reduction in 5.56 x 45mm, 7.62 x 51mm and other popular calibers. The company representative related the enhanced accuracy and reduced chamber temperature. As the polymer case does not transfer as much heat to the chamber walls, the heat is expelled with the gases instead.

BERETTA

Beretta acquired Victrix Armaments and is now offering the 50BMG Corvus as a new addition to their precision rifle line. The rifles are made in-house in Italy with barrels sourced from Benchmark in the US and coated with PVD so as to not require oil. Although the rifles are fixed caliber (e.g., no swap kits to go from 7.62 x 51mm to 6.5 Creedmore), the Victrix line-up covers a variety of calibers such as short-action 7.62 x 51mm, long-action 338 Lapua Magnum, 408 Cheytac and the venerable 50BMG.

MEOPTA

The storied Czech optics manufacturer debuted a new line of tactical red dot and magnified sights. MeoRED T Mini has a more square shaped lens while the T2 Mini has a tube body similar to the Aimpoint T2. The T2 offers three reticles: single dot, two dots for hold-over and a circle-dot reticle. Scheduled for release in May, the MeoRED T is a tube type, full-size, red dot sight utilizing a AA battery for a minimum 2000hr run time at medium brightness. All red dot sights can be paired with the new MeoMag 3x Magnifier for versatility.

The MeoACE 3 x 20mm scope features an etched Ballistic Drop Compensating reticle culminating in a AA-illuminated chevron. The right half of the stadia is calibrated for 5.56 x 45mm and 180gr 7.62 x 51mm, while the left half is calibrated for 7.62 x 39mm.

KNIGHT’S ARMAMENT COMPANY

Two new QDC suppressors are offered: CS and PRS with the former designed for carbines and the latter for precision rifles. Both are designed to reduce back pressure and are expected to ship in the second quarter. A company representative remarked upon their effects in reducing group sizes.

Of interest to “clone” builders, KAC will offer “The Vault” line this year where a rotating selection of legacy accessories is reissued. Four free float RAS AR-15 handguards are slated for 2018: Carbine, Too Long, Mid-Length and MRE. One run is scheduled for the end of first quarter with another in the third quarter. Additionally, KAC is also reissuing the XM9 snap-on wipe based suppressor.

The left side view of the DoubleStar STAR10B rifle. Notice the ACE Hammer Aluminum stock assembly, Hogue pistol grip, US Optics scope and ATLAS bipod.

By Christopher R. Bartocci

The AR-10, although thrown on the scrap heap by the U.S. Ordnance Corps in the late 1950’ and early 1960’s, has been resurrected and with a vengeance. Who would have known that in 2016 there would be dozens of companies making this rifle, and all with their own spin on it. Some of the rifles are basic copies of the same thing and a few companies have taken it a little farther. DoubleStar has been known for their 5.56mm and .300 Blackout rifles and now they have entered the 7.62x51mm/.308 Win market as well with the introduction of their STAR10B.

In 1978, Jack and Teresa Starnes started an AR-15 manufacturing company with a very simple plan; provide their customers with quality American made firearms parts and accessories and outstanding customer service. 38 years later, this same family continues to do just that. From a small house in Winchester, KY to a multi-million dollar facility, DoubleStar Corp continues to grow by leaps and bounds. DoubleStar started as J&T Distributing; stocking AR15 parts and accessories from all the major manufacturers, such as Knights Armament, Ergo, and the list goes on. J&T’s bread and butter was their quality barrels, lower parts kits, stocks, and of course the combination of those parts, the AR15 build-it-yourself kit. J&T kits were so popular, customers demanded a complete AR-15 rifle from the Starnes family. That is when DoubleStar was born. Teresa and son Jesse Starnes (two Starnes=DoubleStar) started the rifle company while Jack maintained the parts side of the business. In 2007, DoubleStar Corporation purchased California based Ace Limited and moved it to Kentucky. Adding Ace to the thousands of parts J&T Distributing already stocked not only added more quality, but also more options for great rifles using Ace stocks. With shelves full of the most popular and high quality parts and accessories, there isn’t much that DoubleStar can’t build for their customers.

DoubleStar offers a diverse line of AR-type rifles. They offer Short Barreled Rifles, pistols, as well as standard rifles in both 5.56mm and the popular 300 Blackout. They offer military grade right up to match grade platforms. The latest addition, released in December of 2015 is the 7.62x51mm/.308 Win caliber Star10B. The rifle has been manufactured using some of the finest parts in the industry to give a match performing semi-automatic rifle.

The rifle weighs in at 9.8 pounds without any magazine or accessories. With the stock extended the rifle has an overall length of 41 inches and with the stock closed 37 1/2 inches. Starting with the rear of the rifle and lower receiver, the stock chosen is the aluminum ACE Hammer stock. Both the receiver extension and stock assembly are manufactured from aircraft grade aluminum. The dimensions are Mil-Spec in length using the cut/short buffer. The receiver extension has 7 positions and the positions are laser engraved on the left side of the receiver extension. The latch has 5 spring-loaded ball bearings to ensure smooth function. The stock itself has an adjustable cheek piece to adjust the shooters eye to align with the optic. There is a sling cutout for a cloth sling on the top rear of the stock. On top of that is a machined quick-detach mounting point for a sling swivel. There are gripping grooves on the rear and bottom of the stock to ensure against slippage. According to DoubleStar, they chose the ACE stock because “The Hammer” is one of the strongest buttstocks on the market, but weighs the same as the Magpul UBR stock. With the “meat tenderizer” on the toe of the Hammer stock, “if you are out at a shooting event and you are served a tough piece of meat, you are good to go!” The stock is one of the slickest and highest quality that this author has come across. It is not by any means light, but it is on a long range sniper platform and not a CQB entry rifle. The lower receiver is manufactured from a billet of 7075 T6 aircraft grade aluminum. This lower is where the rifle really stands out above the rest. When they fire Black Rifles, many people like to hold it with their non shooting hand gripping on the front of the lower receiver (magazine well) and magazine. Not the most comfortable position due to the smooth rounded edges. What DoubleStar did was extend the magazine well down significantly and put checkering on the front of the magazine well making for a comfortable grip. According to DoubleStar “The front of the mag well is the balance point of the rifle. That is where I place my hand, and the extensions prevent disrupting the magazine feed angle and protects your hand in case of an out of battery event. The extended lip can be used on barricades as a rest or the face of the mag well can be pressed against a barricade.” There is a nice flair on the magazine well. Curious as to whether this change would have any effect on magazine compatibility, a good selection of the most popular magazines were put together to test. These magazines included Knight’s Armament, D&H Tactical, Magpul Gen 2 and 3, Advances Storage Components, C-Products, C-Products Defense, X-Products drum and Lancer Systems. The only issue was with the Lancer Systems and X-Products drum. Due to a lip on the front of the Lancer magazine it would not insert. The drum stopped the magazine from being inserted with the extremely long front of the mag well. All others seated and locked perfectly and held the bolt back on the last shot. The trigger guard is part of the receiver and is large enough to use with heavy winter gloves. The pistol grip chosen is the Hogue Over Molded Rubber pistol grip. The safety and bolt catch are standard.

The trigger is the CMC Flat Trigger. This is a drop in unit which comes as a trigger pack. The trigger is two-stage and the trigger pack is held in place by CMC anti-walk hammer/trigger pin set. One end of each pin is held in place via a C-clip. The trigger itself is flat to the pull. This author does better with a curved trigger but this is really a matter of preference. Both work well and it is up to the individual which feels better. The T&E rifle trigger broke at 3 1/2 pounds with literally no creep and a clean break.

The charging handle is the proven VLTOR produced Gunfighter 7.62mm. It has an extended latch on the left side. The extended latch comes in handy when the back of the scope overhangs the charging handle. The latch is what makes the charging handle accessible.

The bolt carrier group is the basic DPMS pattern bolt carrier group. The carrier group is finished with Nib-X. This is an extreme use nickel-boron coating. It has a hardness of 70 Rockwell and a CoF of .08. This coating can be applied to all ferrous and non ferrous alloys except magnesium, providing a hard, lubricious surface to complex geometries. NiB-X conforms to material standards ASTM B607 and AMS2433C and is applied in an NADCAP accredited facility (highest process control standard achievable in the aerospace sector). The advantage to this finish is that it is harder than Tennifer, Melonite, nickel Teflon and hard chrome. It is environmentally corrosion resistant and very lubricious. The finish is easy to clean, requires less maintenance and offers higher reliability and enhanced performance.

The upper receiver is also manufactured from a billet of 7075 T6 aluminum. There is a fired cartridge case deflector as well as an ejection port dust cover. The upper does not have a forward assist assembly. This is good in this author’s opinion. The AR10 was designed by Gene Stoner without it. The forward assist causes far more problems than it cures. From a mechanical stand point, you should never force a round into the chamber. If the bolt does not lock, in law enforcement we call that a clue! Something is wrong, get that round out of the chamber/rifle. Some people use it in the loading process and others to verify the rifle is loaded, these are training applications that have nothing to do with the mechanical operation of the rifle.

The barrel itself is manufactured by Wilson. This rifle has an 18-inch fluted stainless steel barrel with 5 lands and grooves and a 1 turn in 11.5 inch right hand twist. The barrel is air gauged at the factory. This is a match grade barrel capable of firing the heavier M118LR 175gr OTM projectile giving the rifle a maximum effective range of over 800 yards. The muzzle device is the DoubleStar designed and manufactured BULLSEYE muzzle brake. It was designed with accuracy, speed and precision in mind. What makes this muzzle brake unique is the “V” shaped baffle system. There are three chambers which are slightly offset to the bore’s centerline which allows gases to escape in the perfect direction for optimal muzzle control. It also has a pilot hole that can be adjusted for a left- or right-hand shooter. The gas block is low profile and is held on by set crews on the bottom side of the gas block. The rifle uses a rifle length gas system.

The handguard chosen for the STAR10B is the Samson Evolution free floating handguard. The handguard is rifle length (15 inches) and is manufactured from 6061 T6 aluminum. The rail weighs 13.4 ounces with an inner diameter of 1.56 inches and a outer diameter of 1.8 inches. The rail system includes Integrated Anti-Rotation Tabs. The rail is Type III Mil-Spec Hard Coat Anodized. The top rail permits a constant rear to front continues Mil-Std-1913 rail. The rail is provided with a 303 stainless steel barrel nut. There are various length removable Mil-Std-1913 rail segments which may be installed by the end user wherever they are needed.

As previously stated the new magazine well was tested with various types of magazines. The industry standard AR10/SR25-type magazine is what the STAR10B was designed for. This would include the most popular magazine in the industry and what the rifle is provided with, the Magpul PMag 20LR. This magazine has all the Magpul proven features and has the constant curve shape of the 7.62x51mm ammunition stack. The rifle was tested with both the Gen 2 and Gen 3 PMags. The steel magazines tested were the Knights Armament Company, D&H Tactical, CProducts and CProducts Defense. All are straight magazines. The D&H Tactical has witness holes to let the shooter know how many rounds are in it. The Knights Armament is the military issue for the M110 Semi Automatic Sniper System (SASS) rifle. That same magazine is issued to British Sharpshooters with their LMT L129A1 rifles. These all functioned perfectly in the STAR10B. However there were two magazines found to be not compatible. The Lancer polymer magazine and the X-Products 50 round drum. The Lancer magazine has a magazine stop to prevent over insertion. This is on both the 10- and 20-round variants. This stop prevented insertion into the magazine well of the STAR10B. The X-Products is a drum magazine. The drum magazine is designed to begin right outside the basic industry standard magazine well. With the longer magazine well of the STAR10B, the drum magazine will not seat into the mag well at all. These were the only two magazines found not to fit in the STAR10B.

The bipod chosen was the Atlas BT46-LW17 SPR bipod with the ADM 170-S standard lever. This is a very well built bipod. It is manufactured from 7075 T6 aluminum, just like the rifle receivers. The adjustable legs have a height range of approximately 4.75 to 9 inches. It also has a 15 degree ± of preloaded pan, and 15 degree ± preloaded cant. The legs may be stored locked at 45° rearward, or 90° or 45°forward. It has fore and aft picot limiting bosses with non rotating legs. The unit weighs 13.61 ounces. The mount is a throw lever with lock and mounts to a Mil-Std-1913 rail. It comes in black only. The precision manufacturing and quality is exemplary. The bipod has an MSRP of $319.99.

The optic chosen to test the STAR-10B is the US Optics ER-25 5-25x scope. Though not a small scope, measuring 18-inches in length and weighing 2.50 pounds, this scope is capable with the proper rifle and shooter to take accurate shots out to 2,000 yards. The eye relief is 3.5 inches and field of view of 16.6-5.3 with an objective lens 58mm in diameter. The scope is manufactured from 6061 T6 aluminum and then Type III hard coat anodized to a matte black finish. The reticle is illuminated by a push button to turn the reticle bright red for low level light shooting. The intensity is selected by the shooter by either hitting the increase or decrease button on the illumination control of the scope. The knob elevation is adjustable by EREK 1/10 Mil 110 clicks and windage by US#3 1/10 Mil 100 clicks (right). Optics are crystal clear. The MSRP of the optic is $3,301.00 for the basic optic. The scope is mounted to the rifle with an ARMS, Inc. #22 High-throw lever rings. These allow for quick detach. These are the newest version which has an adjustable mount so if the rail does not conform to the proper Mil-Std-1913, the mount can be either increased or decreased to compensate for the manufacture of the rail being out of tolerance. The rings have an MSRP of $129.95 for the set of two.

The rifle was tested with some different types of ammunition. The first is the Black Hills Ammunition 7.62x51mm 175gr OTM. Second is the Remington .308 Win 168gr Match OTM. Third was Barnes Precision .308 Winchester 175gr OTMBT and last is the Winchester .308 Win 168gr Matchking HPBT. All these are excellent precision long range cartridges. There were a total of 300 rounds fired through the rifle. There were no malfunctions with any of the magazines or ammunition. The best group at 100 yards was .55 inches with Black Hills Ammunition 7.62x51mm M118LR loaded with a 175gr OTM projectile. All of the ammunition tested was sub MOA. All averaged around .75 inches. The rifle was not unreliable with any of the ammunition and had neither mechanical nor accuracy issues.

The DoubleStar STAR10B is a very accurate and reliable rifle for whatever you may ask of it. The precision target groupings are clearly qualifiers as an LE sniper rifle, DMR, and for target shooting, hunting or as a self-defense rifle. The main components are all industry standard so there is an excellent supply of parts available as well as options to accessorize. DoubleStar did very well with their initial entry into the ring of .308 Win caliber semi-auto rifles.

Trijicon Introduces Tough Mini Reflex Sights

Trijicon, Inc., the world leader in the development of Brilliant Aiming Solutions for the military, law enforcement and hunting/shooting markets, has introduced its new Trijicon RMR Sight – a patent-pending new generation Ruggedized Miniature Reflex designed to improve shooter precision and accuracy with any style or caliber of weapon. Unlike other red dot sights on the market, this innovative solution is designed for superior durability under the most extreme conditions. Trijicon also designed the new RMR sights to be as strong as the company’s renowned Trijicon ACOGs, and provide ease of sighting and adjustment, solving important issues often associated with other red dot sights. Trijicon’s new design begins with a rugged, forged aluminum housing – one that is extremely sturdy, yet lightweight. This advanced housing encases premium quality optics for superior performance in every tactical, shooting or hunting situation. Other advancements in the Trijicon RMR sights include new large, easy-to-use adjusters that allow for quick one MOA per click adjustment for windage and elevation using a common screw driver or shell casing. The Trijicon RMR provides rapid target acquisition and enhances the shooter’s capabilities in a wide variety of applications. In keeping with Trijicon’s commitment to battery-free illumination, a battery-free model features dual illumination using Trijicon’s patented fiber optics and tritium, and comes in dot sizes of 9 or 13 Minutes of Angle (MOA). This model is the world’s first battery-free mini reflex sight, measuring a mere 1.78 inches long by 1.24 inches wide by 1.03 inches high and weighs in at only 1.22 ounces. Another version features LED illumination provided by a standard 2032 battery, and comes in dot sizes of 4 or 8 MOA. Both are available in black housings and, as further testament to their rugged construction, are rated as waterproof to sixty-six feet. The Trijicon RMR mounts onto Trijicon ACOGs, compact ACOGs, AccuPoints, Mil-Std 1913 rail equipped weapons systems, Weaver rail equipped weapons systems and the more popular handgun models. For more information please contact Trijicon Inc., Dept. SAR, 49385 Shafer Avenue, P.O. Box 930059, Wixom, MI 48393. Phone: (248) 960-7700. Fax: (248) 960-7725. Their website is www.trijicon.com.

New Products from Tactical Night Vision Company

Tactical Night Vision Company (TNVC) is now offering several new night vision related products that have been long awaited by consumers. The first is their new PT-HELMETS A-Alpha Jump Rated Helmets. The A-Alpha is an affordable, lightweight tactical helmet designed for Military and Law Enforcement special operations. Available in three sizes (S-M-L) and three non-reflective matte colors (Black, Tan and OD), it features a removable ACH 4-point chin strap that provides the wearer a more stable NVG platform. The A-Alpha is pre-drilled for both single and 3-hole pattern NVG shrouds, giving the user complete freedom to use any shroud on the market. The shell is expanded polystyrene with removable EVA foam padding, meets EN1078, ASTM1040, and is HALO/HAHO jump rated. The A-Alpha comes with a hard mounted Picatinny rail on the left for accessory attachment, pile tape patch on the right for flag or morale patches and a goggle retention strap on the back. It can be ordered bare, with shroud or ready to go with shroud and flip-up Rhino arm.

The next item is called the MURLM (Multi-Use Rail and Light Mount). This innovative mount allows the mounting of a light and a mini red dot sight. The light mount is for 1 inch diameter lights and positions them right by the users thumb when using a forward mount vertical grip. The rail of the MURLM positions the sight at a 45° angle off of the right side of the weapon. This allows the user to simply roll the rifle slightly to the left and utilize the red dot for close-in engagements. The MURLM can also be ordered bare or with a light and mini red dot already mounted. TNVC also has two new scope accessory ring rails that allow mounting accessories right to a scope. For more information on these as well as a full line of night vision optics and accessories, please contact them at Tactical Night Vision Company, Dept. SAR, 25612 Barton Road # 328, Loma Linda, CA 92354. Phone: (909) 659-2842. Visit websiteat: www.tacticalnightvision.com.

DoubleStar Unveils New 1911

Accuracy, reliability and American pride are qualities that DoubleStar builds into each of its many AR-15 offerings. Now, the Kentucky-based manufacturer is bringing those same attributes down to size by building them into its first-ever handgun. The handgun uses only American-made components and retails for less than $1,200. DoubleStar started with a forged – not cast – steel frame to ensure maximum strength and accuracy. Forging produces a stronger frame by aligning the grain structure of the steel, whereas the annealing and heat-treating of casting may strengthen steel, but it still leaves hard and soft spots in the metal. DoubleStar’s 1911 offers a parkerized, mil-spec finish and 1913 rail for laser, light and scope attachments. At 8 inches in length and 38 ounces unloaded, the handgun features a 5 inch stainless steel barrel and a Novak white dot sight. The 1911 is standard with National Match stainless barrel, Greider trigger and Ed Brown’s Memory Grip Safety. Grips are available in Ergo, Stryder, standard, fancy walnut and even exotic woods. The magazine capacity is 8 plus 1, and the magwell is beveled for an easier, quicker load. DoubleStar’s 1911 is also available with a round or square trigger guard. For more information contact DoubleStar, Dept. SAR, P.O. Box 430, Winchester, KY 40391. Phone: (859) 745-1757. Fax: (859) 745-4638. Visit website at: www.jtdistributing.com.

New PolyTac Tactical Flashlights from Streamlight

Streamlight, Inc., a leading flashlight manufacturer for law enforcement, military and tactical users, has introduced two super-bright, polymer personal lights: the Streamlight PolyTac, featuring a high-performance xenon incandescent bulb, and the Streamlight PolyTac LED with the latest in C4 power LED technology. Their compact size, combined with their strong, tough polymer casing and high light output make both lights perfect for a wide variety of law enforcement and tactical uses. The LED version uses a power LED that provides two to three times the output of Super High Flux LEDs, and the xenon model offers super-bright light as well. Whether used on night-time patrols, investigations, or just carried in a back pocket or holster, these small but tough tactical lights are ideal for police, and military and tactical personnel to carry. The incandescent xenon PolyTac offers a light output of 6,000 candela peak beam intensity and 72 lumens measured system output, while the LED model offers 4,800 candela peak beam intensity and 120 lumens measured system output. The PolyTac model uses a 6-volt xenon bulb, and the LED version features a C4 LED bulb that is impervious to shock with a 50,000 hour lifetime. The xenon model also offers an adjustable head which allows for variable spot-to-flood focus. The xenon version provides 80 minutes of continuous runtime to the 10% output level, and the LED version offers 3 hours of continuous runtime to the 10% output level. The PolyTac weighs 3.9 oz while the PolyTac LED weighs 4.1 oz. Both lights measure 5.22 inches in length and 1.25 inches in diameter. Both the PolyTac and PolyTac LED feature bodies made of high impact, super tough nylon polymer for exceptional durability and a sure grip. Each light features a tailcap push button switch for easy, one-handed operation. The tailcap also can be rotated to a “Safe” position. Both lights use two 3-volt lithium batteries, which have a shelf life of 10 years. Available in black, coyote or yellow, the PolyTac retails for $52 and the PolyTac LED for $65. The light comes with Streamlight’s limited lifetime warranty. For more information please contact Streamlight, Inc., Dept. SAR, 30 Eagleville Road, Eagleville, PA 19403. Phone: (610) 631-0600. Fax: (610) 631-0712. Visit website at: www.streamlight.com.

New Ruger Mini-14 LULA Strip Clip Loader

The LULA Strip Loader was an instant hit with avid shooters who purchase surplus ammo on stripper clips. For 2009, Butler Creek introduces a Strip Loader for Mini-14 rifles. This lightweight strip clip loaders makes it easy and painless to load magazines from clips. You can also load loose rounds and a built-in tab makes unloading rounds a quick and simple operation. Like most LULA loaders, it is small, lightweight and simple to use. It is made from a durable, reinforced polymer plastic, about 1/3 the size of similar loaders and will fit easily into a range bag or pocket. With a little practice, a shooter can load 30 rounds in about 12 seconds. Suggested retail is $29.95. For more information please contact them at Bushnell Outdoor Products, Dept. SAR, 9200 Cody, Overland Park, KS 66214. Phone: (913) 752-3400. Fax: (913) 752-3550. Website: www.butlercreek.com.

New Assault Systems Discreet Carry Cast for the FN FS2000

Elite Survival Systems is pleased to introduce a new Assault Systems Discreet Carry Case for the FN FS2000. The low profile case has a rectangular shape and clean lines. The case has a large accessory pocket on the front with four fitted magazine pouches. Inside the main compartment are dual tie-down straps for the weapon. The main compartment is large enough to accommodate the weapon with an optic attached. It is constructed of 1000 denier nylon inside and out with removable closed-cell foam padding. The case is made more durable with heavy-duty zippers and hardware, double stitching and bound internal seams. Also included is a 2-inch shoulder strap. As with all Elite products, it is made in the USA. Attention to detail and quality of materials make Assault Systems cases an ideal solution. For more information please contact Elite Survival Systems, Dept. SAR, 310 West 12th Street, P.O. Box 245, Washington, MO 63090. Phone: (636) 390-8360. Fax: (636) 390-2977. Their website is www.elitesurvival.com.

New Thermal Monocular from Insight Tech-Gear

Insight Tech-Gear now offers the MTM-V2, a truly pocket-sized, 320×240 high resolution, hand-held thermal imager for a wide range of missions including reconnaissance, surveillance and search & rescue. The ergonomically designed MTM-V2 provides moving man-sized target detection up to 500 meters with adjustable focus, unity magnification and 2x digital zoom. The lightweight, pocket sized MTM-V2 can be tripod mounted and operates continuously for over 4 hours on two 3-volt lithium 123 batteries. The MTM-V2 starts up quickly and has a standby operating mode that saves battery life. Other features include a co-aligned, integrated marking laser (650 nm red or 820 nm IR) and a menu function for custom operation of brightness, gain, polarization, and calibration. The new unit has an integrated 1/4 x 20 tripod mounting plate. Highly functional and portable, the hi-res MTM-V2 is a mission-critical, life-saving tool. The new unit weights only 12 ounces with batteries and is waterproof to 3 feet. Options include a digital picture/video upgrade, a helmet mounting plate and “J-Arm” adapter and amber night filter/demist shield. For more information please contact Insight Tech-Gear, Dept. SAR, 23 Industrial Drive, Londonderry, NH 03053. Phone: (877) 744-4802. Fax: (603) 668-1084. Their website is www.insighttechgear.com.

Crimson Trace Introduces New LaserGrips for the Ruger LCP

Crimson Trace has just introduced its new LaserGrips for the popular Ruger LCP compact pistol. The Model-431 further cements Crimson Trace’s move into the sub-compact market of polymer-frame concealable handguns. The Model LG-431 adds very little mass to the already compact package of the Ruger LCP allowing the pistol to fit into most holsters. It attaches directly and securely to the trigger guard of the polymer frame using two screws that add to the overall stability of the unit. The LaserGrips clamp to the outside of the trigger guard while hugging the frame as it nears the front of the pistol. With the laser diode housing directly under the barrel, it allows the laser to be closer to the bore of the gun creating a very accurate laser sighting device. It is instinctively activated by a pressure switch built into the front underside of the polymer LaserGrips. Simply grasping the firearm in a normal shooting grip activates the laser. All electrical components fit into the LaserGrips and are ergonomically designed for comfort. The Model LG-431 uses either two #357 silver oxide batteries or a single 1/3N 3 volt lithium battery. These small batteries allow the LaserGrips to be unobtrusive yet powerful enough to provide the brightness that Crimson Trace customers expect. Another feature of the LG-431 is that it uses the smaller 3.3mm diameter laser diode versus the standard 5.6 diameter diode that is found in most all other brands of laser sighting devices. This reduces the overall size of the laser diode housing. As with all other LaserGrips, the LG-431 has both windage and elevation adjustments for shooters to adjust the laser on their own. All LaserGrips come with an accessory pack that contains batteries, hex wrenches for laser adjustment, a cleaning cloth and several cleaning swabs. A three-year warranty is standard. For more information contact Crimson Trace Corporation, Dept. SAR, 9780 Southwest Freeman Drive, Wilsonville, OR 97070. Phone: (503) 783-5333. Fax: (503) 783-5334. Website: www.crimsontrace.com.

Trijicon Unveils New AccuPoint Riflescopes

Hunters and serious shooters the world over have asked for it, and Trijicon, Inc. has delivered the first series of Trijicon AccuPoint riflescopes to combine the company’s advanced, self-luminous aiming technologies and superb clarity with the added precision of the hunting industry’s most popular reticle – a crosshair. The new Trijicon AccuPoint with an illuminated crosshair reticle does not require batteries for operation eliminating the need for extra batteries and potential for failure during a critical moment in the field. The new Trijicon AccuPoint riflescope series is designed to deliver accurate, effective aiming under even the most challenging conditions. Trijicon’s exclusive battery-free tritium technology provides precise amber illumination where the crosshairs intersect for effective aiming and optimum target clarity, regardless of available light. The new series of Trijicon AccuPoint riflescopes with a crosshair reticle also features Trijicon’s newly updated Manual Brightness Adjustment Override, which allows the user to shade the tritium and fiber-optics during daylight for the option of decreasing the brightness of the illuminated reticle during increased light situations. In addition to this new illuminated crosshair reticle, Trijicon will continue to offer the original triangle reticle design, which has the additional benefit of the Bindon Aiming Concept (BAC), allowing the shooter to keep both eyes open while tracking, taking aim, and shooting. These new models are loaded with advanced optical elements like multi-layer coated lenses for superior light transmission with no distortion offering exceptional clarity and precision. Additionally, a quick-focus eyepiece, long eye relief, and precise windage and elevation adjustments make the Trijicon AccuPoint easy to zero and quickly make in-the-field adjustments. Each weather-resistant, nitrogen-filled scope body is carefully crafted from aircraft quality, hard anodized aluminum for superior performance and durability. Trijicon’s black matte finish reduces glare to help conceal the shooter’s presence for wary game. For more information, please contact Trijicon, Dept. SAR, 49385 Shafer Ave., Wixom, MI 48393. Phone: (800) 338-0563. Fax: (248) 960-7725. You can also visit them at www.trijicon.com.

DoubleStar Now Has New Dovetail Angle Mount for AR-15/M16

DoubleStar Corp. has announced the development of a new dovetail angle mount for the AR-15 rifle. The new angle mount is made from 6061 T-6 aluminum and hard-coat anodized to military specifications. It still allows use of the rear sight and works well for attaching scopes, lasers, lights or other accessories at a 45-degree angle. The angle mount clamps onto a flat-top upper and can be mounted on either the left or right side and is securely held in place with three socket-head screws and a clamp. This new angle mount uses two mounting screws for a secure lock as compared to most mounts on the market that use only one screw and are prone to movement. DoubleStar’s U.S. made angle mount retails for $24.95. For more information on this as well as an extensive line of other firearms accessories please contact DoubleStar/J&T Distributing, Dept. SAR, P.O. Box 430, Winchester, KY 40391. Phone: (859) 745-1757. Fax: (859) 745-4638. Website: www.jtdistributing.com.

New Picatinny Rail for Ruger Mark II and Mark III pistols

Volquartsen Custom, a pioneer in the design and manufacture of innovative custom parts for Ruger 10/22 rifles and Ruger MK II and MK III pistols, has done it again. This time, Volquartsen’s flare for both functionality and drama take center stage with the introduction of a unique no-gunsmithing scope mount for the Mark II and Mark III pistols. The tactically-influenced mount features a mil-spec Picatinny-style rail on both the top and bottom to provide an efficient double mounting platform for virtually any combination of conventional scope, red dot optic, laser aiming device or tactical light. The new mount attaches easily to any Mk II, MK III, and 22/45 models with the 5.5 inch bull barrels. The sturdy yet lightweight mount is CNC machined from billet aluminum and it’s available anodized in several different colors. Buyers can select either a pre-installed TL rear adjustable sight or a no-sight option. For more information, please contact Volquartsen Custom, Dept. SAR, P.O. Box 397, 24276 240th Street, Carroll, IA 51401. Phone: (712) 792-4238. Fax: (712) 792-2542. Website is located at: www.volquartsen.com.

New Timney AR-10 Trigger

On the heels of the 2007 release of the highly anticipated and wildly successful AR-15 replacement trigger, Timney Triggers now offers another true drop-in trigger for the AR rifle platform. The new AR-10 trigger by Timney is a design created in conjunction with Frank Desomma of POF-USA, manufacturers of the popular P-415 & P-416 Gas Piston AR rifles. The Timney AR-10 trigger is a self-contained, 100% drop-in unit ready to install in an AR-10 rifle for an exceptionally smooth, crisp, single-stage trigger pull. No gunsmithing, fitting, or adjusting is required. Pull weight is factory set at 4 pounds. The lightweight 6061 T6 alloy housing is anodized for superior durability. Hammer is EDM machined from S7 tool steel that combines hardness to resist wear with superior impact resistance to withstand heavy use without chipping or breaking. Finally, a Teflon Nickel coating is applied to the hammer to deliver a super smooth trigger pull with superior lubricity. Other components are EDM cut from A2 tool steel, then heat treated to Rc 56-60 for longer service life. The trigger module installs using your rifle’s original hammer/trigger pins and the proprietary design eliminates pin rotation and walkout. Timney Triggers offer the rifle shooter a convenient way to shop online. Customers can now order the model they want, with the options they want, and request it factory tuned to the pull weight desired. For more information contact them at Timney Manufacturing, Inc., Dept. SAR, 3940 West Clarendon Avenue, Phoenix, AZ 85019. Phone: (602) 274-2999. Fax: (602) 241-0361. They can be found on the web at www.timneytriggers.com.

Fobus Introduces Two New Holsters for Popular Handguns

Fobus Holsters, the leader in polymer holsters with the most fits available, is pleased to announce the new Evolution Series holster for the Beretta Vertec (BRV) as well as a holster for the FN Five-seveN. The new Evolution Holster utilizes their proven Fobus passive retention system that secures the pistol while allowing instant presentation, without the need to disengage mechanical securing devices. Evolution Series upgrades such as an adjustable retention screw, one-piece holster body construction, steel-reinforced rivet attachment system and a protective sight channel have been incorporated. The Vertec Evolution Holster is available in right hand paddle (BRV), belt (BRVBH), roto paddle (BRVRP), roto belt 1-3/4 inch (BRVRB), and roto duty belt 2-1/4 inch (BRVRDB). The BRV also fits the Taurus full size 92/ 99 with rails. The FNH Evolution Holster is available in right hand paddle (FNH), belt (FNHBH), roto paddle (FNHRP), roto belt 1-3/4 inch (FNHRB), and roto duty belt 2-1/4 inch (FNHDB). For more information on these as well as their extensive line of holsters and firearms accessories, please contact Fobus Holsters/Command Arms Accessories, Dept. SAR, 76 Vincent Circle, Ivyland, PA 18974. Phone: (267) 803-1517. Fax: (267) 803-1002. Their website is www.fobusholster.com.

DoubleStar Introduces New Gas Blocks for AR-15/M16 Rifles

DoubleStar now has three new gas blocks for the AR-15/M16 series of rifles. They say that the new gas blocks are lighter and studier than anything on the market today. The trio includes a two-piece two rail, a one-piece four-rail and a low-profile block. Each is especially suited to the needs of individual shooters, and all are more rugged and durable than what have previously been available. The two-piece and four-piece blocks are made of standard 6061 T6 aircraft-grade aluminum with a hard coat anodized finish for a lighter weight. Each has 1913 Picatinny rail systems to accept accessory attachments. The four-rail system is securely held in place with three sets of screws, rather than the typical two. The screw sets – two on the bottom and one on top – ensure a perfect gas seal. The four-piece system is made to fit .750 inch diameter barrels and retails for $64.95. The two piece gas block is easily and securely installed with four socket head machine screws. It is available for a .750 inch diameter barrel or a .625 inch diameter A1 barrel, and retails for $64.95. DoubleStar’s low-profile gas block is made from 1018 steel and mil-spec parkerized, yet maintains a light weight. Designed for shooters who always use a scope, the low-profile gas block replaces the front sight and retails for $38.95. To find out more, contact them at DoubleStar, J&T Distributing, Dept. SAR, P.O. Box 430, Winchester, KY 40391. Phone: (859) 745-1757. Fax: (859) 745-4638. Website: http://www.jtdistributing.com.

Advanced Technology Introduces New Shotgun Stock

Advanced Technology, Inc. has developed an ambidextrous, top folding stock with pistol grip for pump shotguns. Made of matte black, glass-filled nylon, the stock comes with all the necessary hardware and a sling swivel stud. It is easy to install, lightweight, compact and requires no gunsmithing. A quick-release button allows the stock to fold and unfold quickly and also allows the gun to function in both the open and closed positions. It fits the 12 and 20 gauge Mossberg 500/590, Remington 870, Winchester 1200/1300 and the Maverick Model 88. The retail price of the new stock is just $69.99. To compliment the stock, Advanced Technology offer the Deluxe Heatshield with ghost ring sights, and the ghost ring sight adapter that allows combined use of the top folding stock with the heatshield. The stock comes predrilled to accept their shot shell holder for easy access to an extra five 12 gauge rounds. They also offer the stock as the Marine Top Folding Stock with stainless steel hardware for wet weather use. For more information or ordering options, please contact them at Advanced Technology, Inc., Dept. SAR, 102 Fairview Drive, Versailles, KY 40383. Phone: (859) 873- 9877. Fax: (859) 873-6229. Their website is www.atigunstocks.com.

New M-230 Kit for the 1919A4 from TNW Firearms

Have you ever wondered what the ever reliable Browning 1919 machine gun would have looked like if it had continued in development and evolved past the A6 variant? The skunkworks design team of TNW Firearms, Inc. – Mark Eschenbacher, Dennis Gann and Tim Bero – have projected the form and function into a readily adaptable kit that converts any semi or full auto 1919 into a modern mobile squad weapon. The system consists of a lightened .308 barrel with flash hider, innovative front shroud assembly with threaded mounting holes, custom rails, bipod and folding carry handle. Other features include an improved front sight, FN style buttstock assembly and FN style pistol grip assembly with safety. The weapon retains the ability to be fired from a tripod or pedestal. The upgrade takes about twenty minutes to install and requires no permanent modifications to your 1919. The front shroud assembly has a top cover that swings up for quick and easy barrel changes. The barrel of the new system is lightened and shortened to 16 inches. By doing this there is no longer a need for a barrel booster. The custom Picatinny rails on the top, bottom and sides of the front shroud give the user the ability to add optics, front vertical grips, lights, lasers or other accessories. The kit makes the standard 1919A4 look much like an M- 240 GPMG. For more information on this as well as their semi-auto M2 .50 caliber, semi-auto 1919A4 and A6, semi-auto MG 34 and a full line of accessories and gun mounts, please contact them at TNW Firearms, Inc., Dept. SAR, P.O. Box 311, Vernonia, OR 97064. Phone: (503) 429-5001. Fax: (503) 429-3505. Website: www.tnwfirearms.com.

Gunslick Introduces New AR-15 Cleaning Kits

The AR-15 Cleaning Kit offers shooters a specialized high performance cleaning kit. Headlining the components in this kit is Ultra-Klenz, a high-tech copper dissolver and carbon remover and Ultra-Lube, an advanced gun oil protectant. This kit also includes a full line of cleaning accessories, steel cleaning rods and the special AR-15 bronze and steel brush that cleans the chamber. For more information on this as well as the entire Gunslick line-up, contact them at Gunslick Gun Care, Dept. SAR, N5549 County Trunk Z, Onalaska, WI 54650. Phone: (800) 635-7656. Fax: (763) 323-3899. Their web site is www.gunslick.com.