“The one down there with the pistol grip, that was the one I carried in Vietnam; the early version. Andy Grandy of Frankford Arsenal designed that. He called me and I went up there and shot it. He put the loader extension on it so it held eight rounds. With that duckbill at roughly thirty meters you hadda two foot high, twelve foot wide pattern using Number Four buckshot.” Retired US Navy Chief Petty Officer James “Patches” Watson, Curator Emeritus, UDT-SEAL Museum

(Editor’s note: It’s one thing to visit a military museum, but another thing entirely to get one-on-one guided tours by the museum’s Curator Emeritus, as well as its Executive Director. In this report by Military Affairs Editor Robert Bruce, SAR is pleased to provide our readers with what might be considered the next best thing. Small Arms Review is known and apparently respected by influential members of the UDT-SEAL Museum’s board and staff. As a result, our customary request for special access – including a close look at important artifacts currently on display and others in the holding safes – was enthusiastically supported. Special thanks to Association President Willard Snyder, Executive Director Mike Howard, Curator Emeritus James Watson, and Curator Ruth McSween, for taking the extra time and trouble. – Robert G. Segel)

The Chief was standing in front of the museum’s Vietnam War diorama, reminiscing in his distinctively husky and New Jersey-accented voice about three combat tours there, pointing out and describing to this correspondent a particularly important one of the many interesting weapons on display.

While a casual observer might consider the crudely chopped scattergun with only passing curiosity, the bearlike, 69 year old retired SEAL calls it his “Sweetheart.” Watson spoke with great affection about how this beautiful example of deceptively simple form and decidedly lethal function came to be and how it performed in the ultimate arena of combat.

Such a moment is of inestimable value to those who appreciate the presentation of military history through actual artifacts with a direct link to men who carried them in war. This is “provenance” at its finest, a ten dollar word in the museum culture that simply translates to “origin.”

The story of this stubby shotgun first caught our imagination in reading the books Point Man and Walking Point, Watson’s gripping narratives recounting his experiences as a “plank owner” (original member) and combat veteran of SEAL Team Two, written in collaboration with frequent SAR contributor Kevin Dockery.

My duckbill-modified, pistol-grip Ithaca became my “Sweetheart” during my second and third tours in Vietnam. The lack of a stock never bothered me because I would normally carry a shotgun only when I expected to be in close quarters. Close up, I could point my shotgun from the waist and blow away any target I had in front of me out to twenty or thirty yards without any trouble. (Excerpted from the book Walking Point, Copyright 1997, Bill Fawcett & Assoc. Used by permission.)

Now, SAR was privileged to see, and later to handle and photograph, this very weapon in the presence of its near-legendary SEAL owner. Also, to make an audio tape recording that captured for future generations “Sweetheart’s” story and much more in Watson’s own words. This interview, we’re told, will join many other recordings in the museum’s archives, preserving oral history of US Navy special warriors from WWII to the present.

But that’s getting ahead of the main story, a tour of a uniquely fascinating modern military museum.

Birthplace of the Navy Frogmen

Anchored on the very beach where the largely unknown NCDUs – Naval Combat Demolition Units – of WWII began a heroic saga that continues even today, the small but superb UDT-SEAL Museum in Fort Pierce, Florida, opened in November 1985 with Watson at the helm. Now, after twenty plus years of improvements and additions – as well as repairs and restorations following numerous savage storms – visitors enjoy an extraordinary feast of hardware and history.

The museum itself, its original structure a visually striking, brilliant white cylinder with a spiral ramp to a rooftop observation deck, is surrounded by a large fenced compound protecting an exciting assortment of historic vehicles used in naval operations on land, sea, air, and beyond. A pedestal mounted Huey helicopter, icon of the Vietnam War, seems to have just taken off, straining for altitude above mini subs, riverine and oceangoing craft, dune buggies, and – seemingly out of place to those who don’t know why – a pair of space capsules.

The eye sweeps along its virtual flight path toward the nearby Atlantic Ocean, close enough to hear waves breaking and to catch the strong and evocative scent of seawater, carried inland on the steady Tradewinds.

It is from this dazzling white sand beach and clear blue waters that silent sentinels in concrete and rusting steel were recovered from the surf zone. More than a dozen original beach obstacles from WWII, used in demolition training to prepare for the epic invasion of France known as D-Day, now line up alongside the museum.

Wide pathways lead the visitor from one display to another, bordered with hundreds of emotionally powerful memorial bricks. Look closely and find the names of heroes of Naval Special Warfare like Roy Boehm, “The First SEAL.” Additional bricks display other names, and are available to all who support the museum’s mission.

We walked the verdant and well-kept grounds with current Executive Director Michael Howard, a friendly, energetic and wiry 50 year old retired Navy Captain with over 26 years of service including SEAL Team One and command of several Naval Special Warfare units. Howard appreciates this historic location but also notes the daunting environmental challenges that come with it including high temperatures, salt air with humidity, extreme winds, and frequent torrential rains.

Most recently, he said, “Hurricanes Frances and Jeanne hammered us and the whole place was almost destroyed. Boats actually got up and floated. All these are in different positions now than before the hurricanes.”

The Huey was particularly hard hit, he said, with the tail boom breaking off and other extensive structural damage. “New Piper Aircraft, up in Vero Beach, took on the repair project at no cost. They restored it and, with the help of Kauff’s Transportation and Recovery, we got it remounted on the pedestal.”

Pointing to the museum’s two Vietnam War era PBRs (Patrol Boat, Riverine) and a pair of current issue DPVs (Desert Patrol Vehicles), the Captain spoke of plans to improve on these already impressive displays. “One of the projects we’re working on is getting weapons on these boats and vehicles,” he said, hastily adding, “fake weapons.”

“We think that’s important to make the displays a little more dynamic, realistic looking, with more punch,” he said. “That’s what SEALs and boat guys and helicopters supporting them are all about – firepower.”

Since then, we’re told that highly realistic replica .50 caliber M2s have been bought and installed. Wisely, these are made with durable polymer resin that won’t corrode in the harsh salt air and, in this day and times, have the essential advantage of being completely inert.

A Proud Beginning

The Executive Director’s tour moved inside where walls of the main hallway are covered with impressive plaques listing units and personnel from the first NCDU in 1943 to the Plank Owners of SEAL Teams One and Two. These frame the entranceway to the World War Two gallery, heralded by an imposing wall-sized photo enlargement showing men of NCDU 200 during training at Fort Pierce in 1944.

Stepping a few feet inside, Howard paused in an area flanked by illuminated display cases containing individual mannequins representing the rapid evolution in WWII from NCDUs and Scouts and Raiders to UDTs (Underwater Demolition Teams). Each is authentically uniformed, equipped and armed, he said, often with items donated to the museum by actual veterans of the period or their families.

The Hagensen (sic) Demolition Pack is common to all, a generic name given to variations based on a clever field expedient explosive charge with two pounds of pre-rigged C2 packed in a canvas haversack for land or underwater use. The original is credited in official Navy D-Day documentation to Lieutenant (j.g.) C. P. Hagenson (note “son” with an “o”).

Also notable in this section is a tribute to Lieutenant Commander Draper Kauffman, “The Father of Naval Combat Demolition,” who set up NCDU training at Fort Pierce in June of 1943.

Moving around the gallery, Howard acknowledged SAR’s obvious bias by pointing out numerous examples of American and enemy weaponry. All of the standard Navy and Marine Corps small arms have honored places, from the M1911 .45 auto pistol through ’03 and M1 rifles, the M1 carbine, Thompson submachine gun, as well as John Browning’s famous BAR and his unstoppable M1917A1 machine gun.

As counterpoint to standard US firearms, we were pleased to find nice examples of German P38 and Luger pistols, as well as an MG34 machine gun, prominent in the D-Day case.

Japanese weaponry is similarly in evidence, including a representative Nambu pistol and Arisaka rifle. Most impressive to many visitors is the large, radiator-finned Type 92 heavy machine gun, dramatically posed beneath a Japanese battle flag. UDT 24 autographed this flag while occupying Japan, post surrender.

Also prominently displayed is a Samurai sword, formally surrendered by General Tomoyuki Yamashita after losing the battle for the Philippine Islands in 1945. While it was believed for many years that this was the general’s own priceless family heirloom sword, recent expert examination showed otherwise. Howard speculates that, anticipating the inevitable, the canny general sent his home, appropriating one from a junior officer to hand over to the Americans. Both the original surrender document and Samurai sword were presented to the Museum by Draper Kauffman’s family.

North Gallery

Moving ahead in time from victory in WWII and the Occupation of Japan, SAR’s VIP tour continued in the North Gallery with Chief Watson taking over duties at the Korean Conflict wall, fronted by a tripod-mounted .50 caliber Browning M2HB machine gun. This awesome example of John M. Browning’s genius was fielded in the 1930’s, then served with distinction in WWII, Korea and Vietnam. Remarkably, it is still going strong today on Naval Special Warfare Combatant Craft.

The large and menacing machine gun is intentionally set on a boxlike riser at knee height. This, the Chief says, encourages visitors to reach out and touch the gun, a significant departure from the rules at most museums and a particularly memorable experience for many in the school groups and others that regularly visit.

Watson told us that Korea was where UDTs started doing many of the things that would later become SEAL missions, “Going behind enemy lines and attacking fuel depots, bridges and railroad yards.”

The North Gallery’s tightly packed displays of photos, equipment and weapons from Korea to the present Global War on Terror are strongly enhanced by a video presentation on Basic Underwater Demolition School. BUDS is the hellish entry ordeal that all aspiring SEALs must successfully complete. Repeating automatically at regular intervals on a wall-mounted monitor, its sounds of pounding surf, straining men, screaming instructors, throaty cadence chants, gunfire, and explosions fill the gallery, bringing to life the harsh world in which these silent artifacts have served.

The evolution of diving gear for waterborne combat operations is well represented and the museum is particularly proud to have a fine example of the Lambertson Amphibious Rebreather. A “closed-circuit rig” that doesn’t release telltale bubbles, it was introduced in the latter part of WWII for OSS Maritime Units and UDTs.

Walls of Weapons

Noting our quick glances over his shoulder during the introduction to Aqua Lungs and such, the Chief – who definitely shares SAR’s intense appreciation for weapons of all kinds – quickly moved on to the primary focus of our visit. Guns are what we want, and the museum has got plenty of ‘em.

Several large Plexiglas-faced displays are filled with 20th Century military firearms, enticing the visitor to move up close for an intimate encounter. The tall, shallow cases allow examination literally inches from exotic and unusual pistols, submachine guns, rifles, grenade launchers, and more. Read serial numbers, see selector markings, note mechanical details, almost smell the gun oil….

Standing in front of the first case, containing a variety of allied and enemy weapons from the Vietnam War era, Watson recalled his time in preparation for SEAL Team Two’s deployments when, at the prophetic insistence of Team Chief Bob “The Eagle” Gallagher, “We trained with these because you never know if you’re gonna hafta pick one up and use it because you ran outta ammo or something happened to yours.”

The two weapons at the top were ChiCom copies of the RPG-2 (NVA B-40) launcher and generic AK-47 with underfolding spike bayonet. Four submachine guns lined up underneath; an M45b “Swedish K”, French MAT-49, and a Russian PPSh-41, nicely paired with the North Vietnamese K-50M that’s made from it by chopping the barrel and cooling shroud then replacing the fixed wooden stock with a telescoping wire version.

The Chief doesn’t hold the K-50 in high regard, citing at least one he fired with an apparent sear problem. “Hang on ‘cause it wasn’t gonna stop ‘till it was empty,” he said. “Definitely a piece of junk.”

But a big smile appeared when we stepped in front of the next case and he pointed out several of the US weapons his team and others used in ‘Nam. In addition to an early version M72 LAW (Light Antitank Weapon), there were three grenade launchers on display that he heartily approved of. A 40mm M79 “Thumper” often accompanied the Chief as a STAB (SEAL Team Assault Boat) coxswain on riverine missions, and his team got some of the first underbarrel-mounted CGL-4/XM148 launchers off Colt’s assembly lines.

The last of the trio is the exceedingly rare “China Lake Pump,” serial number 4 of a total run said to be only sixteen guns. This is an imposing cross between an M79 and a pump shotgun that allowed the grenadier four quick rounds when things got really hairy.

Of course the Chief has a story to go with the weapon. “When I went back to Vietnam in 1996, serial number 13 was hangin’ on the wall in their war museum,” then added with a knowing look, “I tried to find out who lost that but was unsuccessful.”

The enthusiasm level kept rising as we moved to behold yet another weapons case, this one filled with belt-fed machine guns. The topmost weapon is an HK 23, a sturdy but heavy West German-made 5.56mm that the Chief notes was combat tested by a Team Two buddy, the late John “Fly” Fallon.

But, he says, it didn’t stack up to Gene Stoner’s lighter, compact and modular guns. “Stoner designed a system – a rifle and machine gun combination,” he said, putting emphasis on the word system.

“When I went into Cambodia … I’d take the stock off it and use the short barrel. You wanted to make everything as light and small as you could.” The system aspect of Stoner’s guns is well presented in the three variants on display, showing how a basic receiver group can be reconfigured with various barrels and feed mechanisms. A 63A assault carbine version with folding wire stock and 30-round magazine is sandwiched between two belt-feds. Above is a Mark 23 Mod 0 with a generous 150-round drum and below is a 63A1 with a 100-round box.

(SAR notes that at least one of the Stoners and a good number of the other weapons on display are on long-term loan from the Naval Historical Society’s fabulous holdings. See Robert Bruce’s NHS feature in Volume 7 Number 1.)

Silencers vs. Suppressors

A bit incongruously sharing this machine gun case is an M16A1 with one mounted suppressor and another below, teamed with its cutaway version to reveal the engineering secrets inside. These prompted a quick lesson from the Chief, enlightening those handicapped by Hollywood-generated ignorance. “There’s no such thing as a silencer,” he declared, “every weapon makes some noise in functioning – even a bow and arrow.”

Pointing to the Mark II suppressor and its cutaway on display, he added, “When you use this one without subsonic ammo you’d hear the crack of the bullet when it broke the sound barrier. But it creates deception in locating the direction somebody’s shooting from. If we’re standing here and (points left) a guy’s out there shooting with a suppressed M16, you’d think he was over there (points right) ‘cause what you’d mostly hear is the bullet breaking the sound barrier.”

Shotguns, Shorties and Starlight

Then, turning to his left, Watson paused in front of the Vietnam diorama, figuratively traveling back in time nearly forty years to a nighttime raid on a bamboo hut on the other side of the world. Dramatic life sized figures of three men with green camo face paint and exotic armament are checking out a Viet Cong guerrilla weapons cache, a variety of weapons of communist bloc and other origin.

“The SEALs here just discovered it,” the Chief says, “the guy on the left is carrying a standard Model 37 (Ithaca shotgun) with a ‘duckbill’ – the later version with the ring around it.”

And there, sitting on a wooden ammo crate in front of the SEAL, was Watson’s own “Sweetheart,” described at the beginning of this feature. But he isn’t pleased that this makes it look like his gun had been captured. “That didn’t happen,” he declared, “we’re gonna get some stuff moved around.”

The SEAL on the right carries another interesting combo, a chopped M16 dwarfed by a big, strange apparatus attached to its topside carrying handle. The Chief shakes his head as he recalls his own brief experience with this ungainly rig.

“Here’s one of the first ‘Starlight Scopes,’ but it was too heavy and cumbersome,” he said. “I used it once mounted on a CAR Fifteen (submachine gun version of the Colt AR-15 rifle)…. Too heavy and when you put it up to your eye to use it there’s a green glow. Take it away and you’re blind; night vision’s gone in that eye for thirty minutes.”

Post-Vietnam to GWOT

The North Gallery continues with exhibits showing activities and operations since Vietnam, overseen by an eerie life-sized hologram with the spectral three dimensional presence of a SEAL armed with an MP5 submachine gun. He tirelessly guards displays showing Naval Special Warfare units in action in Grenada, Panama, Persian Gulf, Iraq and Afghanistan.

Noteworthy among the photos and artifacts is another tall case packed with examples of Navy edged weapons from the Mark I KA-Bar of WWII thru the new Gerber Silver Trident, the Chief’s own design in collaboration with Bill Harsey, Jr.

Across the way, visitors can walk right up and touch a battle-damaged 12.7mm ChiCom Type 54 heavy machine gun, a clone of the Soviet DShKM, captured by SEAL Team Two’s Fourth Platoon during a still-politically sensitive operation in the Persian Gulf in the late 1980s. Roughly equivalent to Browning’s M2HB, the exotically configured and impressively large weapon should spark recognition of how lethal is the arsenal of our current enemies.

Operation Desert Storm, the 1st Gulf War, is the final major exhibit, shown in display cases full of captured Iraqi gear dominated by a mannequin in “chocolate chip camo” uniform, representing a SEAL operating far behind enemy lines. Then, the last bit of wall space available in the museum holds a meaningful tribute to the eleven SEALs killed on a combat rescue mission in Afghanistan on 28 June 2005.

Safekeeping

Few museums have everything in the collection on display and this one has packed a small storage room literally from floor to ceiling with rare, unusual and truly exotic artifacts. Stepping up close we encountered vintage tactical radios, diving gear, uniforms, and other interesting items from decades of NSW operations. How about an example of the distinctive XM257 shotgun ammo that goes with the “Duckbills” on display? Got it. “Bazooka” rockets used against beach bunkers? Yep.

Also, three large safes line one wall of the room, jammed with weapons and other high-value artifacts. Their massive doors swing open to reveal an eclectic mix ranging from Great War vintage machine guns to GWOT RPGs. Chief Watson pulled a few out for us to handle (wearing the necessary white cotton gloves, of course) and graciously gave us the opportunity to shoot detailed photos. In addition to a 1917-made Lewis Gun that served in WWII protecting UDT craft, there’s Robert Marshall’s M1 Carbine (UDT 3 and 5) and a ‘Nam era S&W Model 39 auto pistol with suppressor.

But our props really started turning when the Chief set a trio of crude handguns down on the white background paper of our makeshift studio. “These are homemade VC pistols,” he said, “captured by Team Two’s ‘Fly’ Fallon and his PRU (Provisional Reconnaissance Unit) on a Phoenix operation.”

There, right in front of us, were jungle workshop weapons; surprisingly well made by resourceful guerrillas, captured by a real SEAL on a CIA-directed mission, brought back home by him, then personally donated to the museum. This is powerful provenance and future visitors can look forward to the time when space is available to put them and their story on display.

Artifacts Sought

Curator Ruth McSween has recently come on board. With a Masters Degree in Museum Studies, she brings a high degree of professionalism to the demanding tasks of cataloging, preservation, presentation, and much more.

McSween encourages the continued contribution of letters, photographs, uniforms, oral and written histories, weapons, and other memorabilia, relating to the history of Naval Special Warfare of all eras. Like most museums, they have a need for certain historical items to fill important gaps in the collection: OSS Maritime Units, the history and evolution of Special Warfare Combatant Craft, and photographs of UDT platoons executing hydrographic reconnaissance survey work.

Additionally, she says, “We would like to increase the number of artifacts that date to more recent operations including both wars in Iraq as well as the war in Afghanistan.”

Bigger and Better

Available space for major exhibits ends after the first Gulf War. So museum leaders are aggressively pursuing funding for expansion to showcase recent and ongoing NSW operations in Afghanistan, Iraq, and other battlegrounds of the Global War on Terror.

Howard explained that there are existing architectural plans for a dramatic new addition but day to day operational costs have to take priority. “Right now we’re only making ends meet,” he said.

Association President Willard Snyder, interestingly a retired Army Colonel (Infantry) with service in 12th Special Forces Group (USAR), told us the Board of Directors is working to “get one focus and move ahead financially.” Both Snyder and Howard see corporate donors – such as major defense contractors – as natural sources of funding and other support.

Howard, Snyder and the Chief all emphasize the essential contributions of rank and file members whose dues, volunteer work, donations of artifacts, personal and professional networking connections, are the museum’s firmest foundation. Increasing membership – open to all who wish to support preservation and presentation of the history of Naval Special Warfare – is a top priority.

Find Out More

Membership details and a printable application form may be found on the Museum’s excellent website at www.navysealmuseum.com. Additionally, the site offers a stunning “virtual museum” tour as well as a wealth of information on history, heritage, and links for those interested in SEALs and other current Naval Special Warfare units. Go on-line shopping at The Ship’s Store for an interesting assortment of UDT and SEAL memorabilia including shirts, caps, pens, mugs, patches, stickers, videos, and plenty of books such as Chief Watson’s Point Man.

See For Yourself

No trip to Florida by a modern military history buff or small arms enthusiast would be complete without a side visit to tropical Fort Pierce and its UDT-SEAL Museum on beautiful North Hutchinson Island. Most anytime is fine, but particularly during Muster, the yearly gathering of past and present SEALs and other NSW members. The 21st Annual Muster, featuring spectacular combat demonstrations and other exciting activities, is scheduled for November 10 through 12, 2006. There’s detailed info on the museum website.

UDT-SEAL Museum
3300 North Highway A1A
Fort Pierce, FL 34949-8520
Telephone (772) 595-5845
www.navysealmuseum.com
Other Useful Websites
www.nswfoundation.org
www.navysealteams.com
www.navyseals.com
www.seal.navy.mil
www.realseal.org

2006 marks the 100th Anniversary of the quintessential American 20th Century military cartridge. While outdated by modern cartridges it has been kept alive by nostalgia and the deep affection of shooters and collectors the world over.

The average gun enthusiast may be forgiven for wondering what all the fuss is about. After all, didn’t the .30-06 start its service life with a 150-grain spitzer bullet and end its service life with basically the same 150-grain bullet? Well, yes it did, but for the first 50 years of its service life it was available in a myriad of military loadings and for the following 25 years it was used as a vehicle for testing ideas in small arms ammunition development. By the turn of the 21st century, its military use was limited to training purposes and for military salutes.

This article will focus on the U.S. military evolution of the .30-06 and only briefly touch on non-US development and civilian use. Even so, this will be a superficial look at the official U.S. rifle and light machine gun cartridge through two World Wars and countless “Police Actions.”

Politics and Cavalry Charges

To look at the use of the .30-06 around the world is a lesson in geopolitics. Its spread around the world didn’t really occur until after WW2 when the U.S. sought to influence foreign governments, either to stem the spread of communism or to develop trade – and what better way than to provide these friendly governments with your excess munitions. Eventually the .30-06 was used in almost 50 countries.

Even a cursory look at the various .30-06 loadings and how they were developed illustrates the changing face of warfare through the 20th Century – from cavalry charges to “dirty tricks.” The development of the .30-06 through the 1920s and 30s reflected the lessons learned during WW1. However, by the advent of WW2, cavalry charges had been relegated to the history books and the importance of the aircraft was becoming obvious.

During WW2, the diverging requirements of ground, air and sea warfare often resulted in serious development and production delays for the various .30-06 loadings. Basically, they were trying to have a single cartridge do everything.

As the U.S. became more and more involved in S.E. Asia after Korea, it seems that running wars became the province of the intelligence agencies and not the armies, navies and air forces actually doing the fighting.

The .30-06 was replaced by the 7.62mm NATO round in 1954 and U.S. military production for combat use ceased in the 1960s.

Modest Beginnings

The .30-06 was the result of several basic developments that occurred in the late 19th Century: the use of smaller caliber weapons; smokeless powder and rimless cases. The move towards smokeless powder came with the .30-40 Krag introduced in 1892 but this had limited powder capacity.

By 1901, Frankford Arsenal in Philadelphia (the government facility where the majority of ammunition development took place) had developed a rimless .30-caliber round. This was adopted as the .30 Ball Model of 1901 and commonly referred to as the “.30-01”. It used a 220-grain round-nose bullet and it had a thick rim – much thicker than contemporary rimless cartridges. At this time, Springfield Armory was also developing what would become the .30 Rifle, Model of 1903. The .30-01 was also further developed, losing its thick rim but retaining the 220-grain round-nose bullet to become the .30 Model of 1903 – or “.30-03”.

With the rest of the world pursuing pointed bullets, it only took a couple of years for someone to stick a pointed bullet into a .30-03 case that had the neck shortened by 0.10-ins to accommodate the reduced bearing surface of the pointed bullet. Things were simpler in those days and on October 15, 1906, the resulting cartridge was approved as the .30 Cal. Model of 1906, what we now call the “.30-06”.

Loadings

Before discussing the various loadings, we should mention colored bullet tips. The U.S. used these to identify various loadings in the .30-06. The following is a list of the colors used on service rounds and their meaning. Caution is advised if you are using this list to identify a loading as other countries did not always follow U.S. marking practice.

Common U.S. .30-06 Bullet Tip Color Codes

• Black: Armor Piercing (AP)
• Black/Silver: AP Plate Test
• Blue: Incendiary
• Green: AP for UK
• Green/White: Frangible
• Green/Tan: Frangible
• Orange: Tracer
• Red: Tracer
• Silver: Armor-Piercing Incendiary (API) and Navy contract Ball (1941)
• White: Tracer (and unfinished Frangible)
• Yellow: Observation

BALL

The first ball round for the .30-06 used a 150-grain flat-based bullet with a cupronickel jacket. This is referred to as the “M1906” bullet and it remained in use through World War I.

The use of machine guns at long range in that war revealed that the .30-06 was outclassed by rounds firing heavier bullets. Thus, in the immediate post World War I period, the U.S. experimented with heavier bullets. They tested many variations and it is amusing to note that one of the rounds tested at this time used a modified round-nose Krag bullet. The result of these tests was the adoption, in 1925, of the 172-grain boat-tailed “M1” bullet which had a gilding metal (a copper alloy) jacket.

By the mid-1930s it was evident that the use of machine guns at long range was a thing of the past and the recoil of a 172-grain bullet would be uncomfortable for the average GI. As a result, the original 150-grain M1906 bullet was re-adopted in 1937, though it did now have a gilding metal jacket. At first the original nomenclature “M1906 Ball” was used, but this was quickly changed and this new bullet was called the .30 M2 Ball. The 172-grain M1 bullet didn’t go away and continued to be used by the Navy. Initially, M2 ball rounds used a stannic (i.e.: tin) stained bullet to identify them from the M1 and this staining lasted until 1940. To further confuse matters, one of the last lots of M1 ball rounds produced by Frankford Arsenal in 1941 for the U.S. Navy had silver-tipped bullets. These should not be confused with silver-tipped API rounds which didn’t appear until 1943.

During World War II, because of supply problems with strategic materials like copper, the use of a steel bullet jacket was permitted. The jackets were given a gilding-metal plating and are referred to as the “.30 M2 Alternate” – a name which often appears on packaging. Though the supply of copper improved, the M2 Ball and the M2 Alternate Ball bullets continued to be used for the remainder of the .30-06’s military career.

ARMOR-PIERCING (AP)

The first AP round produced in service quantities in the U.S. was the controversial M1917 which had a cupronickel jacket with an exposed lead tip. Since The Hague Convention of 1899 effectively banned the use of expanding bullets on personnel, there were significant worries from the front lines to the extent that General Pershing ordered that it not be used by the American Expeditionary Forces.

The M1917 was quickly replaced by the M1918, which was identical in design except that it did away with the exposed lead tip. It is identified by a smooth cannelure (ring) on the bullet above the casemouth. The M1918 remained the service issue AP for a few years but was replaced in 1922 by a round having a slightly heavier steel core and identified, for the first time, by a black tip to the bullet. It was termed the “M1922” and had a gilding-metal jacket.

By the early 1930s, with the increasing use of armor, significant development took place with high-velocity AP bullets. It resulted in the adoption in 1934 of the high velocity AP M1. It was also identified by a black bullet tip and at 3,180 fps was considerably faster than the M1922 AP’s 2,600 fps. This was very much an interim measure as experimentation continued with this high-velocity series throughout the 1930s. In 1939, this avenue was abandoned and the M1922 was adapted slightly and renamed the AP M2, which remained the standard .30-06 AP bullet until the 30-06 was phased out.

One variation of the AP that wasn’t “service issue” is worth mentioning and this is the AP Plate Test. Loaded at various velocities and provided to companies manufacturing armor plate, it was intended to “proof” the plate prior to government acceptance. Initially they were not identified except by a box label and can be found with a black or a plain bullet tip. From about 1940, when large quantities of these Plate Test AP rounds were made, they were identified by a silver-over-black-tipped bullet.

ARMOR-PIERCING INCENDIARY

While the search for a way to give the small .30-06 AP bullet an incendiary effect started in World War I, it wasn’t until World War II that they had any success. The small lead point filler between the steel core and the bullet jacket was exchanged for a small quantity of a barium nitrate/magnesium mixture called IM-11. First identified by a black and blue bullet tip and called the T15 in 1943, it was quickly changed to a silver bullet tip and called the M14 API. By the late 1940s, they had changed the shape of the AP core which allowed substantially more of the incendiary mixture to be used and this was termed the M14A1.

BLANKS

Blanks were designed to perform a variety of functions from simply noise blanks to the launching of grenades or radio antennas.

In the U.S., the first noise blanks were those using the same paper bullet as used in the .30-03 blank and these were called the M1906 Blank. The paper bullet also contained a charge of powder to facilitate its break up. Some may be found with the tinned cases and in 1909 some .30-03 blanks with this bullet were adapted to the .30-06 chamber by resizing the neck.

Due to the cost and complex production process, an alternative to the paper bullet blank was designed that had a casemouth simply roll-crimped over a tan cup-shaped wad and this was adopted as the M1909 Blank. It went through a series of improvements, the most notable of which was the use of a simple red card wad, and was the standard noise blank for the life of the .30-06.

Grenade blanks first appeared on the scene in the early 1920s. Most of these functioned on a rod-type grenade and used a heavy powder charge to propel it. These were eventually standardized as the M3 Grenade Blank in 1941. This was identified by a rose-crimped casemouth with a red seal. Also of note is that throughout its life, the powder charge was a mixture of smokeless and black powder.

One interesting grenade blank from the 1920s is that made for the Viven-Bessiere practice grenade, which functioned by using the residual gases of a ball cartridge with the bullet passing through the center of the grenade. Since the danger space of a ball round greatly exceeds the danger space for the grenade (the bullet being able to travel much further than the grenade), a blank using a solid wood bullet was designed that could launch the practice grenade in range areas too small to accommodate a full-power ball cartridge.

It is worth mentioning here that you cannot safely tell a noise blank from a grenade blank strictly by its appearance. While the U.S., for the most part, used a blank with a roll-crimped casemouth over a red wad as the service issue noise blank, other countries did not adhere to this identification. In addition, there are numerous movie blanks that used military surplus cases, with a rose-crimped casemouth. Lake City made several batches of .30-06 blanks as late as 2002 for veterans’ funerals and these had a rose-crimped casemouth.

While not a U.S. development, Norway, France and Germany made extensive use of plastics for blanks starting in the 1950s. The U.S. did not embrace plastic cartridges in small arms ammunition in those days and even now there seems to be some reluctance. Nevertheless, these are colorful variations and perhaps the most familiar in the U.S. is the blank made of gold-colored plastic that was used in the movie “The Longest Day.”

DUMMIES

The early drill practice dummies (called the M1906 Dummy) had 6 corrugations running down the tinned case and from 1 to 4 holes in the case. It evolved, losing the tin plating, and gradually reducing the number of case holes until there were none, but retained its “Dummy M1906” designation through World War II. It was resurrected in the Korean War as the Dummy M40 and may frequently be encountered with a corrugated steel case.

Dummies for weapon functioning and inspection normally have smooth cases as corrugations might not reveal imperfections in an action or chamber. These smooth-case dummies first appeared at the end of World War I. These were usually tinned with two holes in the case. In 1938 a similar dummy, called the M2, was introduced with the tinned case and from one to three holes. It was made through the 1950s and is often seen with a plain brass or steel case.

The Range Dummy is, as far as we know, unique to the .30-06. It appeared in 1920 as a device for detecting flinching with recruits on the firing range. Identified only by a tinned primer and a groove cut in the head of the case, it was slipped into a magazine by the instructor without the knowledge of the recruit. It remained in use in some places until the early 1940s.

Perhaps the oddest .30-06 dummy is that intended for the Hollifield Target Practice Rod device. A special rod with a sharp point was fitted into the rifle barrel. The “Dotter” cartridge also had a rod in it and when it was “fired” the blow was transmitted to the rod in the barrel which popped out and pricked a paper target hung just in front of the muzzle. Designed in 1908 it was used extensively through World War I.

FRANGIBLE

The development of the frangible cartridge (i.e.: where the bullet breaks up on impact without damaging the target) illustrates the challenges endured by developers faced with different requirements from each branch of the Armed Forces.

In the early 1940s, the basic idea was to be able to train bomber gun crews by having them fire at real aircraft. Initially the Air Force approached the Ordnance Department but nothing happened. To cut a long story short, the NDRC (National Defense Research Committee – a civilian “think-tank”) was contacted. Duke and Princeton Universities got involved and eventually developed the frangible cartridge two years later. The mottled green/gray bullet was a mixture of bakelite and powdered lead referred to as RD-42-93. It was identified by a green and white bullet tip and muzzle velocity was a mere 1,360 fps. It was initially called the T44 Frangible but formally accepted in April, 1945 as the M22. A minor variation, the T74, using a tan over green bullet tip was developed in 1945 using a different propellant. By this time, the limited value of .30 cal. aircraft armament had been realized and most aircraft had been upgraded to .50 cal. machine guns.

GUARD & GALLERY

While these were initially considered separate loadings, they eventually filled both functions. The first Guard cartridges appeared in 1907 for use by sentries at military installations and prisons in urban areas. They were identified by 5 cannelures in the middle of the case and had a very small powder charge (muzzle velocity was 1,200 fps). The cannelures were its downfall as the case would separate in a dirty chamber. The identification was then changed to 6 short corrugations on the case shoulder. Production ceased about 1918 though it was still issued for a number of years after that.

Gallery or “Short-range” cartridges were used for training purposes. Up until 1919, various solutions were tried and the most common being a 198-grain pointed lead bullet called the “Ideal” bullet. It was replaced by a 140-grain lead bullet that became the Gallery Practice M1919. This nomenclature was changed again in 1933 when it became the M1 Guard Cartridge.

Countries like Norway and Germany used plastic cases and/or plastic bullets in .30-06 short-range cartridges from the 1950s. Again, these did not prove popular in the U.S.

INCENDIARY

The earliest .30-06 incendiary round was the M1917 which had a charge of white phosphorous and was identified by a flat tip bullet. The side of the bullet had a small hole that was sealed with solder which melted as the bullet traveled down the barrel – igniting the phosphorous on contact with the air.

This was quickly replaced by the M1918 which was identical internally but had a blackened pointed bullet to match the trajectory of the ball cartridge of the day. With experience passed on from the R.A.F. following the Battle of Britain, the U.S. was able to develop a bullet with a charge of barium nitrate/magnesium as the incendiary agent inside a steel sleeve. It was identified by a blue bullet tip and was accepted as the M1 Incendiary in 1941. It remained virtually unchanged for the rest of its service life.

SPORTING

While sporting cartridges are beyond the scope of this article, it is worth mentioning one commonly encountered load that had a military connection. It was made by Remington with a 280-grain round-nose soft-point bullet and packaged in military style boxes with a government contract number. Folk-lore has its purpose as protecting Alaskan bases from polar bears. As has recently been discovered, these were actually a contract for Springfield Armory in Massachusetts for their heavy recoil tests of 1955.

TRACER

The earliest .30-06 tracer you are likely to encounter is the M1917, which was identified by a chemically blackened case and used through World War I. The bullet had a cupronickel jacket until 1921 when it was changed to gilding metal.

In the 1920s there was considerable effort to improve the tracer with the M1923 and then the M1924 Tracers being adopted, both identified by black cases. It was renamed the “M1 Tracer” in 1926 and in 1930 the identification was changed from a black case to a red bullet tip. It remained in service into World War II when the differing requirements of air and ground wars triggered further development. Like its ball counterpart, the use of steel jackets was permitted in 1943 and packaging may be seen labeled “M1 Alternate Tracer.”

While the M1 tracer was used until the end of WW2, a short-trace version was developed in 1942 and became the “M2 Tracer.” Initially it was identified by a white bullet tip but this was quickly changed to a red bullet tip with an additional knurled cannelure on the bullet. Also in 1942, the Air Force voiced the need for a dark-ignition trace; one that would not blind the pilot. The result was a dim-ignition tracer at first called the T10 and later adopted as the M25 in 1945 with an orange tipped bullet. It remained the standard tracer for the rest of the .30-06’s military life.

SPECIAL PURPOSE LOADINGS

While there were many experimental loads developed in its first 50 years, we will concentrate here on a few of the unusual loads that illustrate the .30-06 usage in the 1950s and 60s.

Multiball

The concept of firing multiple projectiles with one shot is as old as ammunition itself. As far as the .30-06 is concerned there were experiments by Greener of the UK in the post World War I period with duplex and triplex loads being developed. In the U.S., it wasn’t until Project Salvo (1952-1961) that serious development took place along these lines. Commonly seen with both the standard length case and ones with an extended neck holding two or three bullets, these were developed by Olin (who owned Winchester-Western). Of note is the powder charge between the bullets to ensure separation and the fact that they had to angle the base of the lower bullets to ensure sufficient dispersion to make it worth while. Some of these rounds had colored bullet tips to identify special lots.

Explosive/Observation

These were designed to either increase damage to a target or to indicate the point of impact – often in a sub-caliber device. There were World War I experiments with a blunt-nose bullet with protruding nipple/firing pin, and World War II experiments using the Pomeroy bullet done by Winchester. The latter bullet is notable in that it has a capsule of dynamite in the nose activated by the bullet’s rotation. Both Frankford Arsenal and Winchester developed observation bullets with a complex internal mechanism called the T99. These appeared in the early 1950s and were identified by a yellow bullet tip. (A yellow bullet tip was used on a number of experimental loadings and not just observation rounds).

Silent Cartridge

Nothing illustrates the changing use of the .30-06 more than the silent .30-06 cartridge. Using the captive bolt principle, these were an all-steel assembly where a piston propelled a steel bullet that had a nylon driving band. It was developed in the 1960s and eventually patented in 1977. The same concept was applied to the QSPR (Quiet Special Purpose Revolver) rounds for the Viet Nam “Tunnel Rats.”

DUDS

Most will be familiar with the Remington “Accelerator” round that uses a .223-cal. bullet in a plastic sabot to provide a high velocity round as pictured in the lead photo on page 42. The concept was used on what is probably one of the .30-06’s rarest loadings – the Depleted Uranium Discarding Sabot (DUDS). This armor-piercing round was developed during the 1960s and 70’s and used the plastic sabot to hold the uranium slug.

These represent just a few of the special purpose loadings from this era. Others include manstopper, helmet test, radio destructor, flare and tear-gas loads.

U.S. Manufacturers

While many military and commercial manufacturers made the .30-06, this is a listing of the main U.S. Military manufacturers. The headstamp letters used are shown in parenthesis.

• Frankford Arsenal, Philadelphia (FA, FAL) made .30-06 from 1906 until ~1961. It closed in 1977.
• Denver Ordnance Plant, Colorado (DEN) made .30-06 from 1941-1944.
• Des Moines Ordnance Plant, Iowa (DM) made .30-06 from 1942-1945.
• Eau Claire Ordnance Plant, Wisconsin (EC/EW **), made .30-06 from 1942-1943. (** Initially they used “EC” on the headstamp but this was changed to “EW” to avoid confusion with Evansville Chrysler – which didn’t actually make .30-06).
• Lake City Ordnance Plant / Lake City Arsenal / Lake City Army Ammunition Plant, Independence, Missouri (LC), made .30-06 from 1941-1945, 1951-late 1970s, 1993, 2002. Also produced the clandestine headstamp “C / N [false date]” in 1953.
• St. Louis Ordnance Plant, Missouri (SL), made .30-06 from 1941-1945, 1952-1957. Also produced the clandestine headstamp “B / N [false date]” in 1953.
• Twin Cities Ordnance Plant, Minneapolis (TW), made .30-06 from 1942-1945, 1951-1957. Also produced the clandestine headstamp “A / N [false date]” in 1953.
• Utah Ordnance Plant, Salt Lake City, (U, UT), made .30-06 from 1942-1943.

The big commercial companies like Winchester-Western, Remington, Peters, United States Cartridge Company (U.S.C.Co.) and UMC also made .30-06 on government contract at various times.

Chris Punnett is author of the book “.30-06” and Editor of the International Ammunition Association’s Journal (http://cartridgecollectors.org).