GEMTECH 

.22LR 42gr Match Subsonic 

Optimized for use with a suppressor, Gemtech .22 Long Rifle Ammunition is the perfect choice for the peaceful plinker. With a premium heavy 42-grain lubed lead bullet and clean burning powder, Gemtech .22LR ammunition delivers consistent 1020 fps subsonic velocities, hard hitting performance and match grade accuracy. Sold in 500-round bricks or 5,000-round cases. 

MSRP: $7.00 per 50rd box • Where to buy: Gemtech.com and Gemtech dealers nationwide. 

VIBRA-TITE

Hot-Lock Threadlocker 

Vibra-Tite Hot-Lock is a medium–high strength, ceramic-based thread locker which exhibits unparalleled temperature resistance up to 2000°F and excellent performance across many different substrate finishes. 

Hot-Lock Extreme Temp Threadlocker will lock threaded barrel devices in place at temperatures where standard thread lockers would disintegrate. In addition to handling extreme heat, Hot-Lock resists vibration to keep those parts locked in place, round after round. 

Whether you compete or just plink, keep your firearm in good working order. 

MSRP: $15.00 • Where to buy: amazon.com 

FEDERAL 

350 Legend 

Blow the doors off straight walls. The new 350 Legend offers higher velocities than any straight-wall deer cartridge, with significantly less recoil than 450 Bushmaster in a compact, maneuverable platform. It’s an ideal fit for both MSRs and bolt-action rifles, penetrates deep and delivers ample energy to take down any buck. Federal has harnessed all the 350 Legend has to offer with three new loads in our Fusion, Power-Shok and Non-Typical lines. All get peak accuracy and terminal performance from the round thanks to consistent bullet designs that expand reliably at 350 Legend velocities. 

MSRP: Starting at $26.95 • Where to buy: federalpremium.com

SPEER 

Gold Dot G2 

The next generation of protection has arrived. Previously only offered to law enforcement, Speer Gold Dot G2 offers the ultimate performance for self-defense thanks to an exclusive nose design. Instead of a large hollow-point cavity, Gold Dot G2 has a shallow dish filled with a high-performance elastomer. On impact, the material is forced into engineered internal fissures to start the expansion process. The result is extremely uniform expansion, better separation of the petals and more consistent penetration across barrier types through full-size handguns. 

MSRP: Starting at $28.95 • Where to buy: speer-ammo.com

CCI 

Clean-22 Pink 

Keep your rimfire running cleaner and help fight breast cancer with new CCI Clean-22 Pink. A portion of the proceeds from every box sold goes directly to the effort to find a cure. Like other Clean-22 loads, its exclusive polymer bullet coating greatly reduces copper and lead fouling in the barrel—without leaving a residue. It also cuts lead buildup in suppressors 60 to 80 percent and comes in a 400-round bulk bottle that’s perfect for long days at the range. With dependable CCI priming and consistent propellant, Clean-22 Pink provides flawless cycling through semiautomatics and all .22 LR firearms. 

MSRP: $29.95 • Where to buy: cci-ammunition.com 

CHIPOTLE PUBLISHING, LLC 

1-Year Subscription to Small Arms Review 

The ultimate Small Arms Resource on industry practices, historical archives, new products, legal issues and breaking news. The 10-Issue Subscription comes with free online access to articles and content 

MSRP: 39.95 • Where to buy: smallarmsreview.com 

ALIEN GEAR 

Cloak 3.5 IWB Holster 

The sophistication of Alien Gear’s enhanced Cloak 3.5 IWB Holster can’t be comprehended until you experience the soft backing and perfect retention for yourself. It’s an experience not to be missed. Two adjustable clips securely attach to your belt, while a CoolVent Neoprene backing comfortably and flexibly conforms to your body. A custom-molded shell securely retains the firearm while properly protecting your trigger guard. You’ll want to treat your firearm to this masterful creation. 

MSRP: Starting at $49.88 • Where to buy: aliengearholsters.com 

CHIPOTLE PUBLISHING, LLC 

The U.S. M14 Rifle: The Last Steel Warrior (2nd Edition) 

Now in hardback format, the second edition of this classic work is now expanded to 430 pages and includes new information from recently discovered government documents and numerous color photographs. What’s included: Prototypes and production M14 rifles and their commercial semiautomatic counterparts, contractors, subcontractors, experimental models, match and sniper rifles, modern M14 rifles, training, magazines, parts and accessories, ammunition, maintenance and more! 

MSRP: $69.95  Where to buy: smallarmsreview.com

STREAMLIGHT, INC. 

Streamlight ProTac 90 

At just 3.75 inches, the ultra-compact ProTac 90 is a super-bright, right-angle tactical light that delivers up to 300 lumens and a 1.5-hour run time on high. The light features a 90-degree head and a multi-function clip designed for hands-free options, which fits MOLLE and other gear. The light’s proprietary TEN-TAP® programming allows for three modes: high/ strobe/low; high only; or low/high. The ProTac 90 features convenient multi-fuel technology with three battery options: CR123A lithium battery, AA alkaline or AA lithium battery. 

MSRP: $68.00 Where to buy: streamlight.com 

DTLGEAR 

Bleeding Control Kit 

Our Bleeding Control Kit (IFAK) is a much needed item for your range bag, car, ATV, or to have anytime you’re in the field. Accidents can happen anywhere, and a person can bleed out and die within 2 minutes. The kit includes a SWAT-T or SOFTT-W tourniquet, chest seals, CPR mask and more needed to save a life. 

MSRP: $79.95 • Where to buy: dtlgear.com 

HACKETT EQUIPMENT 

Little Bertha 2 Pistol Range Backpack 

Don’t let the name fool you … The Little Bertha 2 Pistol Range Backpack is not little, and it is not just for the range. This is your everyday gun bag for the range, work and travel. It has two pistol holsters, spots for eight magazines, eight ammo box pouches and compartments for the rest of your gear. It comes in Coyote Tan and makes a perfect front seat companion. The backpack comes with a Lifetime Warranty. 

MSRP: $79.99 • Where to buy: hackettequipment.com 

DOUBLESTAR 

Ahab Fixed Blade Knife 

This everyday carry knife was designed to be discrete and compact without sacrificing relevance. Elements like the oversized ring and precision thumb break provide the best amount of retention for quick deployment. The Ahab’s strong, lightweight construction makes it the perfect duty belt utility that will be there when you need it most. The Ahab is made from 1084 Carbon Steel and includes a kydex sheath and Safe-Lock belt clip. 

MSRP: $84.99 • Where to buy: doublestarusa.com 

BIGFOOT GUN BELTS 

Suspenders 

Bigfoot Gun Belts Suspenders are beefy, brawny but classy. Straps of rich English Bridle leather, in black, brown or tan, with elastic back straps create the perfect fit. Large and small suspender clips are included, but additional clip styles are also available, including belt hooks, trigger snaps and button tab attachments so you can customize your experience. Bigfoot Suspenders are built strong but make an elegant appearance. Business or outdoor styles are available! 

MSRP: Starting at $85.88 • Where to buy: gunbelts.com 

FEDERAL 

Syntech Bulk Bucket 

There’s never been a better way to have an epic day at the range. All-new Syntech Bulk Buckets boast 250 to 500 rounds packed in rugged plastic buckets that stack, store and transport easily. The one-of-a-kind TSJ® projectile uses a polymer jacket to eliminate metal fouling and drastically reduce damaging barrel heat and friction. The bullet style also minimizes splash-back on steel targets. Its exclusive Catalyst™ primer provides hot, reliable ignition without the use of lead. 

MSRP: Starting at $96.95 • Where to buy: federalpremium.com 

ALIEN GEAR 

ShapeShift Core Carry Pack 

You have what it takes to become a master shapeshifter, and we have what you need to experience concealed carry perfection. Introducing the ShapeShift Core Carry Pack. This transformative system equips you with everything you need to seamlessly transition between four distinct concealed carry positions. From IWB to OWB to appendix carry, you’ll be efficiently and effortlessly carrying how you want, when you want. We invite you to become a master shapeshifter today. 

MSRP: Starting at $99.88 • Where to buy: aliengearholsters.com 

DTLGEAR 

First Aid Kit 

Our high-quality First Aid Kits are designed by and for shooters / sportsmen. It includes a complete IFAK kit for major situations including SWAT-T or SOFTT-W tourniquet, chest seals and CPR mask. It also includes items needed for minor emergencies including adhesive bandages, eyewash, compression bandages, gauze, tape, splinter removal tools and more. Weighs just 1 pound, 14 ounces. 

MSRP: $99.95 • Where to buy: dtlgear.com 

DOUBLESTAR 

Stronghold Pistol Grip with G10 Panels 

DoubleStar has taken pistol grips to the next level by combining durability and customization in one awesome package. Introducing the Stronghold Pistol Grip. This innovative design utilizes a lightweight, anodized aluminum frame and customizable textured G10 grip panels. The palm swell provides a secure but comfortable surface for the shooter’s hand even in gloves. The high-quality U.S.-made G10 panels round out the package with rugged style. Available in Black, Red, FDE and Gray. 

MSRP $99.99 • Where to buy: doublestarusa.com 

CONCEALED CARRIE 

Compacts 

In direct response to their valued customers, Concealed Carrie offers fashionable compacts and matching cross body chains, the perfect accessory to your handgun. Stay organized and protected with Concealed Carrie’s Compacts. The double-sided design acts as a wallet on one side while keeping your firearm separate and secure on the other. The zippered main compartment is full of dividers for currency, credit cards and personal items. The adjacent double-zippered Hook-and- Loop-lined firearm compartment safely stores your handgun. 

MSRP: Starting at $109.00 (Chain sold separately for $15.) Where to buy: concealedcarrie.com 

SPYDERCO 

Endela

Sized to literally split the difference between Spyderco’s iconic Endura 4 and Delica 4 Lightweights, the Endela offers all the highly refined features of each in the perfect “in-between” format. Its full-flat-ground blade is crafted from VG-10 stainless steel and sports a fully accessible Trademark Round Hole for ambidextrous one-hand opening. Available in either PlainEdge or SpyderEdge, the blade is supported by a sturdy back lock, skeletonized stainless steel liners and injection-molded, fiberglass-reinforced-nylon (FRN) scales. 

MSRP: $123.00 • Where to buy: spyderco.com 

GEMTECH 

22 QDA 

Add quick-detach capability to all ½-28 threaded .22LR and .22Mag rimfire suppressors. The Gemtech 22 QDA (Quick Detach Adapter) system includes a four-lug muzzle device, threaded ½-28 for use on all standard rimfire threaded barrels, a quick-detach mount that threads into the rear of the suppressor and an installation wrench. Swap rimfire suppressors between host firearms in seconds with this fast and secure mounting system. 

MSRP: $130.00 • Where to buy: Gemtech.com and Gemtech dealers nationwide 

TACTICA 

Concealed Carry Sweater 

Your concealed carry wardrobe deserves a revival, especially if your clothes get in the way of your draw. Our Concealed Carry Sweater understands your pain and was expertly designed to solve your concealed carry problems. Made of 100% Merino Wool, this ultra-soft sweater not only keeps you warm, but deeply conceals your firearm. With two ambidextrous faux draw-through pockets, you’ll be able to draw from your corset or belly band holster in seconds. 

MSRP: Starting at $149.99 Where to buy: tacticafashion.com 

KELTEC 

KelTec P17 .22LR 

At less than 14-ounces fully loaded, the KelTec P17 .22LR is easy to handle for almost anyone. Add its threaded barrel, Picatinny-style accessory rail, ambidextrous controls, three 16-round magazines, and this package offers a value far greater than its MSRP. Thanks to its excellent trigger, fiber optic front sight and adjustable rear sight this innovative, new KelTec pistol not only burns bullseyes, but it builds confidence on a budget. 

MSRP: $199.00 • Where to buy: Local dealer 

MANTIS 

Mantis X10 

The Mantis X10 is the next evolution of the original MantisX. The X10 features a completely redesigned hardware set and powerful algorithms that give users real-time feedback on their shooting performance. The X10 features a RecoilMeter, holster draw analysis and other dynamic shooting analyses and feedback. 

MSRP: $250.00 • Where to buy: mantisx.com

SPARTAN BLADES 

Spartan-Harsey Dagger 

Designed by prolific knife designer William W. Harsey, Jr., the Spartan-Harsey Dagger was designed as a real-world combat dagger. Based on Mr. Harsey’s extensive experience working with Special Operations Forces, he has developed what many believe to be the epitome of what a combat dagger should be. Its timeless design is matched only by the use of premium U.S. materials which include: S35VN, double-deep cryogenic treatment, pressure tempering and full tang construction making for a knife that will most assuredly become an American classic. 

MSRP: Starting at $390.00 • Where to buy: spartanbladesusa.com 

MEPROLIGHT 

MEPRO Micro RDS and Picatinny QD Rail 

The MEPRO MicroRDS, is a small, rugged, energy-efficient, electro-optical red dot sight designed for handguns, shotguns and rifles with a large display window and a clearly defined red dot for fast target acquisition with both eyes open. The MicroRDS Kit includes a patent-pending dovetail adapter with a quick detach mechanism that allows mounting and dismounting the MicroRDS on the gun with a click of a finger. The adapter includes high-quality Meprolight Night Sights that allow accurate and fast shooting under any lighting conditions when the MicroRDS Optic is removed. Meprolight just introduced their MicroRDS Optics- Ready-Guns QD rail plate for GLOCK, Smith & Wesson M&P pistols and the new IWI MASADA pistol. 

MSRP: $440.00 • Where to buy: meprolight.com 

ADVANCED ARMAMENT CORPORATION 

Jaeger 30 

A high-performance Suppressor built with AAC’s industry-leading efficiency, which allows us to deliver what every hunter and the game they pursue deserve: superior suppression, great accuracy and rifle control, all at an affordable cost. 

MSRP: $449.00 Where to buy: advanced-armament.com 

STREAMLIGHT, INC. 

TLR- 8 G 

Featuring an “eye-safe” green aiming laser visible in daylight, the TLR-8 G is a compact rail-mounted tactical light designed for maximum visibility and long-range targeting. The light features three modes, including Laser-only to keep the light on target; LED-only for 500 lumens of bright, focused light; and Dual Mode, which combines the laser and LED. With a low-profile ambidextrous switch to protect hands from gun muzzles, the TLR-8 G is easily mounted to a wide range of weapons. 

MSRP: $450.00 • Where to buy: streamlight.com

IWI 

MASADA 

The MASADA takes user preferences to a new level, with each feature carefully selected based on input from military, law enforcement and gun enthusiast alike. The MASADA was engineered to endure all elements while maintaining IWI legendary attention to detail and reliability. 

MSRP: $480.00 • Where to buy: iwi.us 

CZ-USA 

457 Lux 

Designed in the European style, the 457 Lux has a hogback stock fashioned from Turkish walnut. With a cheekpiece and comb ideal for use with its crisp iron sights, this 457 is one classy plinker. Like all 457s, it has an 11mm dovetail for mounting optics and can be quickly and easily swapped to a different chambering with the addition of a second barrel set to include .22WMR and .17HMR (sold in our webstore). One 5-round magazine is included. 

MSRP: $499.00–$522.00 • Where to buy: cz-usa.com 

SPYDERCO 

Respect 

Designed by Spyderco founder Sal Glesser, the Respect represents his personal interpretation of the classic American Bowie Knife. Its dramatic clip-point blade is made from 300-inch-thick CPM 154 stainless steel and has a broad profile for exceptional edge geometry. The two-piece handle is machined from solid G-10 slabs and seamlessly attached to the concealed tang with oversized Torx screws. A knife truly worthy of its name, the Respect comes complete with a handcrafted leather sheath. 

MSRP: $560.00 • Where to buy: spyderco.com 

SMITH & WESSON 

M&P9 M2.0 4” Compact Flat Dark Earth 

The award-winning Smith & Wesson M&P 9 M2.0 Compact 4-inch Pistol is now available in the desirable Flat Dark Earth (FDE) color. The M&P 9 M2.0 Compact pistol is purpose-built for personal and professional use and features a Cerakote FDE slide, polymer FDE frame and the enhanced M2.0 feature set. Available with or without an ambidextrous thumb safety, the M&P9 M2.0 Compact 4-inch pistol comes standard with a white-dot front sight and a white two-dot rear sight, a capacity of 15+1 rounds and ships with two magazines, including two magazine extender sleeves for use with full-size magazines. 

MSRP: $569.00 • Where to buy: smith-wesson.com 

MEPROLIGHT 

MEPRO Foresight 

Meprolight introduces the first augmented reality (AR) weapon sight that uses real-time data or is used in conjunction with the MEPRO Foresight Mobile App (Android and IOS Bluetooth interface). It has 5 preset reticles, digital zeroing, a built-in compass, leveler and real-time projected data right on the transparent optical lens to keep the user informed at all times. The Foresight also features a built-in sensor for automatic brightness adjustment and a rechargeable battery using a USB. The mobile app provides for constant firmware updates and additional features including storing profiles and the ability to load a preset zeroing profile from the app. The large viewing window allows the user to keep both eyes open for increased situational awareness. 

MSRP: $714.00 • Where to buy: meprolight.com 

TRIJICON 

SRO 

The Trijicon SRO (Specialized Reflex Optic) is specifically designed for pistol use. The wide field of view and clean, crisp dot makes it easy for users to find and track the dot in both target and competitive shooting applications. Every SRO features both manual and automatic LED brightness modes. Additionally, a top-loading CR2032 battery provides a 3-year battery life (at setting 4 of 8). These features make the SRO a great choice in any application.

MSRP: $749.00 • Where to buy: trijicon.com 

MARLIN FIREARMS 

336/1895 Marlin Dark Series Rifles 

The speed and accuracy of Marlin lever actions, blacked-out and tricked out for the modern hunter. Our new Dark Series rifles feature a stealthy-tough black matte parkerized finish and a black-webbed hardwood stock, with a host of performance enhancements, including a threaded barrel, big-loop lever and XS Lever Rail with ghost-ring peep that also accommodates a wide variety of optics. 

MSRP: $949.00 • Where to buy: marlinfirearms.com 

REMINGTON ARMS COMPANY 

V3 Tactical Shotguns 

New for 2019 the V3 tactical line of shotguns are designed to offer a new generation of home defense shotguns to the market. Utilizing the patented Versaport gas system and the V3 platform design we are able to offer lightweight, soft shooting and utter reliability. All tactical models feature the enhanced ergonomic features of our pro series field guns and make this the ultimate home defense shotgun for the 21st century. 

MSRP: $1,095.00 • Where to buy: remington.com

WINDHAM WEAPONRY 

20-inch A1 Government Rifle 

Windham Weaponry’s new 20-inch A1 Government has the original A1 look and feel but is built to shoot with modern conveniences. The A1 upper includes a brass deflector and teardrop forward assist. The rifle-length handguard has an A1 delta ring. The 20-inch barrel with a 1-in-7 twist includes an A1 flash suppressor. The A2 stock includes a trapdoor storage compartment. Every rifle comes with Windham Weaponry’s transferable lifetime warranty. 

MSRP: $1,160.00 • Where to buy: Through your local dealer 

BLACK RAIN ORDNANCE 

Patriot-America Rifle 

Black Rain Ordnance has made a promise to make your firearm exactly that, your firearm. With the addition of the Spec + Series, you have over 100 different build configurations and 21 different finish options to choose from. If you are looking to add something special to your arsenal, without breaking the bank, the all new Black Rain Ordnance Spec + Series would be a good choice for you.

MSRP: $1,199.00 • Where to buy: blackrainordnance.com 

WINDHAM WEAPONRY 

.450 Thumper Pistol 

Windham Weaponry’s .450 Thumper pistol has become widely popular for people looking for a firearm to combat feral hogs. The pistol is chambered for the .450 Bushmaster round. It includes a 9-inch medium profile barrel that is capped with the proprietary Nor’easter muzzle brake and covered by the Windham Weaponry 7-inch, free-float, railed handguard. It is fitted with the adjustable SB Tactical pistol arm brace. Every firearm comes with Windham Weaponry’s transferable lifetime warranty. 

MSRP: $1,254.00 Where to buy: Through your local dealer 

BLACK RAIN ORDNANCE 

Ion 9 

The Ion 9 is a pistol caliber carbine which is fed from Glock-style magazines and operates on a complete billet platform utilizing a patented side-charging, non-reciprocating upper that is mated to a dedicated billet lower with a flared magazine well for quick reloading. With various build options within the Ion 9 series, you are sure to find the best subcompact pistol caliber firearm to fit your needs. 

MSRP: $1,259.00 • Where to buy: blackrainordnance.com 

CZ-USA 

Dan Wesson Vigil Series 

A more affordable entry into the Dan Wesson lineup, the Vigil Series pistols are all built around a forged aluminum frame with a stainless slide. The round-top slide wears a tritium sight on the front and a serrated tactical rear. The frontstrap is checkered 25 LPI, as is the rear that also features a rounded butt for comfortable carry, available in 9mm and .45ACP. With four different models the Vigil can be purchased in Government, Suppressor-Ready, Commander and CCO platforms. 

MSRP $1,298.00 • Where to buy: danwessonfirearms.com 

BARRETT 

MRAD Barrel Conversion Kit 

Barrett Firearms Manufacturing, Inc., the leader in long range, has been awarded a contract from the U.S. Department of Defense to provide an undisclosed number of MRAD rifle systems chambered in a new caliber, 300 PRC. The MRAD’s robust design, user modularity and unfailing accuracy, combined with the new precision rifle cartridge designed by Hornady, offer an unbeatable system for long-range effectiveness. 300 PRC MRAD Barrel Conversion Kits are available on Barrett’s webstore. 

MSRP: Starting at $1,535.00 • Where to buy: store.barrett.net

CMMG 

BANSHEE 300 

BANSHEE 300 Series 10mm rifle. 8-inch barrel, 30-round SGM Tactical Magazine, radial delayed blowback, AR platform—Last round bolt hold open. 

MSRP: $1,649.95 • Where to buy: cmmginc.com / Local retailer 

NIGHTFORCE OPTICS 

NX8 1-8×24 Riflescope 

The NX8 1-8×24 F1 puts the power of an 8x into a compact and lightweight riflescope. Optimized for short- to medium-range shooting. Its daylight visible, center red dot allows the shooter to engage targets with the speed of a red dot sight, but as range increases, its first focal plane reticle provides precise hold points. In close quarters, the NX8™ 1-8×24 provides a wide field of view; a quick turn to 8x allows precision shots. 

MSRP: $1,750.00 • Where to buy: nightforceoptics.com 

IWI 

TAVOR 7 

The all-new TAVOR 7 is the next evolutionary step in the Tavor bullpup family. It is an innovative, powerful and reliable weapon that can be rapidly and easily deployed in all combat situations. TAVOR 7 carries the usual reliability expected of all IWI products with some increased ergonomic features. 

MSRP: $2,099.00 Where to buy: iwi.us 

WEATHERBY 

Backcountry Rifle 

This rifle provides the craftsmanship and quality expected from a Mark V rifle only surpassed by the stunning color combination and true rugged dependability that embodies its name, Backcountry. This model carries many of the same innovative technologies including a carbon fiber stock, 3D HEX recoil reducer, TriggerTech Trigger and Accubrake ST. The Backcountry weighs in at a mere 5.3 pounds built on a 6-Lug receiver. 

MSRP: $2,499.00 • Where to buy: weatherby.com 

WEATHERBY 

Mark V CarbonMark Rifle 

The Mark V CarbonMark is a custom-built, stunningly precise rifle ready for any adventure. This carbon barrel is lightweight, accurate and fast-cooling. 95% of the carbon fiber does not touch the barrel allowing air to foil around the steel and rapidly cool the barrel. If you are looking for a combination of breakthrough rifle performance and rugged reliability this rifle should already be in your gun safe! 

MSRP: $2,499.00 • Where to buy: weatherby.com 

NIGHTFORCE OPTICS 

ATACR 4-16×50 Riflescope 

If there is such a thing as a “professional” riflescope, it is an ATACR. They are designed for military, law enforcement and other tactical professionals … and for those who simply want to shoot like a professional. Shooters who choose the ATACR 4-16×50 will enjoy superb low-light performance, ED glass, extensive elevation adjustment, all housed in a riflescope impervious to recoil from the largest calibers. A range of first focal plane reticles address any shooting environment. 

MSRP: $2,500.00 • Where to buy: nightforceoptics.com 

TRIJICON 

1-8×28 VCOG

The Trijicon 1-8×28 VCOG (Variable Combat Optical Gunsight) is a highly rugged, variable magnification riflescope designed for close-quarter battle (CQB) and long-distance marksmanship. With a forged aircraft-grade 7075-T6 aluminum housing, the VCOG is nearly indestructible. Superior glass provides exceptional clarity and color with zero distortion. The universal segmented circle crosshair dot reticle is designed for multi-platform use, offers 11 user-selectable brightness settings and is powered by a lithium AA battery.

MSRP: $2,800.00 • Where to buy: trijicon.com 

FLIR SYSTEMS, INC. 

Scion PTM 

FLIR Scion PTM packs high-performance thermal imaging into a rugged, IP67-rated handheld monocular. Capable of geotagged video recording and live video transmission, the Scion PTM can instantly stream encrypted thermal footage of any pursuit, evidence recovery or search and rescue effort to the command center via wireless network. A smooth 60 Hz refresh rate and picture-in-picture zoom capture minute details from a distance and maintain peripheral awareness for constant thermal supervision of suspects, team members, and standbys. 

MSRP: Starting at $3,295.00 • Where to buy: flir.com 

FLIR SYSTEMS, INC. 

ThermoSight Pro Series PTS536 

Powered by the breakthrough FLIR Boson core, the ThermoSight Pro Series PTS536 weapon sight sets the standard for thermal detection and classification. Featuring a 12 μm pixel pitch sensor and 50mm lens, the PTS536 delivers brilliant, clean thermal imaging with a focused 4.5° × 3.5° field of view. The entire ThermoSight Pro Series offers an uncompressed video signal, a high-definition display and shot-activated video recording. 

MSRP $3,795.00 • Where to buy: flir.com 

BARRETT 

MRAD Rifle System 

Barrett Firearms Manufacturing, Inc., the leader in long range, has been awarded a contract from the U.S. Department of Defense to provide an undisclosed number of MRAD Rifle Systems chambered in a new caliber, 300 PRC. The MRAD’s robust design, user modularity and unfailing accuracy, combined with the new cartridge designed by Hornady, offer an unbeatable system for long-range effectiveness. 

MSRP: Starting at $6,000.00 • Where to buy: store.barrett.net 

LIBERTY SUPPRESSORS

Whitetail Integral Bolt Rifle

We developed the Whitetail for the hunter in mind specifically. Most silencer designs either are centered on the casual shooter or the tactical community, but none really addresses the needs of the American hunter directly. Liberty Suppressors’ silencer is built with a grade 9 Titanium tube and an aircraft aluminum rear support to reduce weight of the assembly. The blast diffuser and the core are both made from stainless steel for durability due to the blast energy impingement that they are subjected to during use. The core is retained by means of a standard “off the shelf” 3/8-inch drive ratchet with a special profile milled in the front of the core, preventing the need for special tools for disassembly during routine maintenance. The overall length of the package is designed to mimic an unsuppressed hunting rifle as closely as possible. We also virtually matched the weight of the original unsuppressed rifle, by keeping the weight down in the suppressor module. This creates a package that is light, quiet and durable for the hunter in the field.

• MODEL : Whitetail 
• CALIBER: 6.5mm (6.5 Creedmoor) 
• LENGTH :13.5in 
• DIAMETER: 1.375in 
• WEIGHT: 6.5lbs 
• FACTORY TESTED SOUND REDUCTION: N/A 
• MATERIALS: Titanium/Aluminum/Stainless steel 
• FINISH: Graphite Black Cerakote 
• MSRP(USD): $999
• libertycans.net

LIBERTY SUPPRESSORS

Zulu Integral AR-15 Upper

The Zulu is a balance between suppression, accuracy, backpressure and balance. This integral is designed to mitigate the excessive back pressures generated by the typical AR-15 platform, and the suppressor’s flow-for-ward design gets the gas away from the shooter better than many other 556 suppressors on the market.

• MODEL: Zulu 
• CALIBER: .223 Wylde 
• LENGTH: 16.6in 
• DIAMETER: 1.625in 
• WEIGHT: Stripped upper–3.7lbs 
• FACTORY TESTED SOUND REDUCTION: N/A 
• MATERIALS: Titanium/ Inconel / Stainless steel 
• FINISH: Graphite Black Cerakote 
• MSRP(USD): $1550
• libertycans.net

B&T

Mounted Machine Gun Suppressor

The B&T Mounted Machine Gun Suppressor offers various advantages to the user. Besides the obvious purpose of reducing the sound of the gun more than 14dB, which makes command and communication easier, reduction of the muzzle flash is of paramount importance. As the muzzle flash gives away the position of the gun immediately, its reduction greatly adds to the safety of the shooter as its position is less visible, especially in the hours of twilight or darkness.
As opposed to other designs made by B&T, this suppressor is designed for use with mounted weapons; the weight of the suppressor, therefore, was not of a primary importance. B&T produces other suppressors which are lighter and better suited for dismounted use.

• MODEL: Mounted Machine Gun Suppressor 
• CALIBER: 5.56mm (.223) / 7.62mm (.308) 
• LENGTH:190mm (155mm extending gun) 
• DIAMETER: 48mm 
• WEIGHT: 1.0kg 
• FACTORY-TESTED SOUND REDUCTION: ca. 14dB 
• MATERIALS: Inconel / Thermax 
• FINISH: Sandblasted / Grey 
• MSRP (USD): $ TBA 
• bt-ag.ch

GEMTECH

Lunar 45

The GEMTECH Lunar 45 is the solution for shooters suppressing a variety of platforms and pistol calibers. Constructed from military grade aluminum and titanium, the Lunar 45 offers durability and strength without excess weight. This modular design is hearing safe in both configurations, and supported by a wide range of mounting accessories.

• MODEL: Lunar 45 
• CALIBER: 45 Auto 
• LENGTH: 8in Long, 6.9in Short 
• DIAMETER: 1.375in 
• WEIGHT:12.3oz Long, 10.9oz Short 
• FACTORY-TESTED SOUND REDUCTION: N/A 
• MATERIALS: 6AL4V Titanium, 7075 Aluminum 
• FINISH: Matte Black Type III Hard Coat Anodize 
• MSRP (USD): $799 
• gemtech.com

GEMTECH

ONE

The GEMTECH ONE is the solution for shooters seeking maximum versatility and durability. Constructed from Inconel and titanium, the ONE offers unwavering performance on short-bar-reled 5.56 through 300WM rifles. Featuring an interchangeable thread mount/ Quickmount™ system the ONE can be mounted to a vast range of rifle platforms and calibers.

• MODEL: ONE
• CALIBER: 300 WIN MAG 
• LENGTH: 7.8in 
• DIAMETER: 1.625in 
• WEIGHT: 17.4oz 
• FACTORY-TESTED SOUND REDUCTION: N/A 
• MATERIALS: Inconel 718, 6AL4V Titanium 
• FINISH: Matte Black High-Temp Cerakote® 
• MSRP (USD): $1,099
• gemtech.com

DANIEL DEFENSE

DD WAVE

The DD WAVE sound suppressor’s cascading baffle geometry more effectively attenuates sound than simpler baffle styles. A unique one-piece, 3D-printed baffle and tube eliminate the need for welds—typically the weakest points of a traditional suppressor. Constructed of nickel-based superalloy, stainless steel and Titanium—and then Cera-kote-coated—the DD WAVE is fiercely strong yet lightweight, making it durable and reliable for full-auto use. danieldefense.com

• MODEL: DD WAVE 
• CALIBER(S): .17 HMR to .300 Win Mag 
• LENGTH: 7.6in 
• DIAMETER: 1.5in 
• WEIGHT: 17.2oz 
• FACTORY-TESTED SOUND REDUCTION: N/A 
• MATERIALS: Nickel-based superalloy, stainless steel and Titanium construction for durability 
• FINISH: Cerakote 
• MSRP (USD): $850 for the QD/$799 for DT 
• danieldefense.com

SILENT LEGION SUPPRESSORS

7.62×39 Quick Detach SL-AK

The Silent Legion SL-AK is your answer for a high-performance suppression system for 7.62x39mm platforms such as the AK-47. It comes standard with the Bi-Lock Quick Detach mounting system, as well as the two Bi-Lock QD flash hiders that cover the most common thread pitches on AK firearms.

• MODEL: SL-AK 
• CALIBER: 7.62mm
• LENGTH: 7.75in
• DIAMETER: 1.50in
• WEIGHT: 17oz
• FACTORY-TESTED SOUND REDUCTION: 32dB
• MATERIALS: Titanium
• FINISH: High Temperature Cerakote
• MSRP (USD): $989
• silentlegion.com

SILENT LEGION SUPPRESSORS

.450 Bushmaster .458 SOCOM

Designed with the straight-wall cartridge hunter in mind, the durable .450 Bushmaster.458 SOCOM suppressor is the perfect thing to harness the energy of this heavy hitting round and tame the noise as well as the recoil. Direct Thread comes with Suppressor Retention System.

• MODEL: SL-BM 
• CALIBER: .450 Bushmaster/.458 SOCOM 
• LENGTH: 8.75in 
• DIAMETER: 1.50in 
• WEIGHT: 18oz 
• FACTORY-TESTED SOUND REDUCTION: 30dB 
• MATERIALS: Titanium 
• FINISH: Cerakote 
• MSRP (USD): $1,048 
• silentlegion.com

FREEDOM ARMORY

Dragoon 7.62 CQB

The Dragoon 7.62 CQB suppressor is machined from solid Titanium bar stock creating an extremely durable, lightweight suppressor without welds or failure points. It’s serviceable down to the piece parts and provides top-rated sound reduction across the entire caliber range. See the Dragoon’s proprietary 2-second Titanium quick-detach mount!

• MODEL: DRAGOON CQB 
• CALIBER: 7.62 
• LENGTH: 7.5in 
• DIAMETER: 1.375in 
• WEIGHT: 11oz 
• FACTORY-TESTED SOUND REDUCTION: 138dB at muzzle | 132dB at ear 
• MATERIALS: Titanium 
• FINISH: Cerakote 
• MSRP (USD): $1095 
• tioninc.com

ELITE IRON

STFU LITE

The STFU LITE was designed for hunting and light-use applications. The Titanium construction makes this suppressor light and easy to shoot out in the field. Designed to be used on .30 / 06 or smaller cartridges.

• MODEL: STFU LITE 
• CALIBER: .308, .30/06 
• LENGTH: 7.875in 
• DIAMETER: 1.625in 
• WEIGHT: 15oz 
• FACTORY-TESTED SOUND REDUCTION: 27.5dB 
• MATERIALS: Tube: Grade 9 Titanium Internals: Grade 5 Titanium 
• FINISH: Black Cerakote 
• MSRP (USD): $1095
• EliteIron.com

ELITE IRON

DELTA LITE 

he DELTA has been very popular. In response to this, we have created the DELTA LITE similar performance in a lighter package. The DELTA LITE suppressor is available in a variety of different popular calibers; it is a favorite among varmint hunters. This suppressor is suitable for both bolt-action and semiauto rifles.

• MODEL: DELTA LITE 
• CALIBER: .223, 22-250, .243 or 6.5 
• LENGTH: 7.5in 
• DIAMETER: 1.5in 
• WEIGHT: 12oz 
• FACTORY-TESTED SOUND REDUCTION: 34dB 
• MATERIALS: Tube: Grade 9 Titanium Internals: Grade 5 Titanium 
• FINISH: Black Cerakote 
• MSRP (USD): $950 
• EliteIron.com

Manufacturers Show Off Their Latest & Greatest in Las Vegas

FOREWARD

A good number of manufacturers offered a brace-equipped pistol version of their rifles at this year’s SHOT Show held January 23–26 in Las Vegas. Having the Hearing Protection Act waiting in the wings, there were a number of suppressors and related products, with the LMT suppressor being an interesting new design. Also prominent were the number of 1-x variable magnification scopes from various manufacturers.

NIGHTFORCE

Nightforce introduced two 1-8x scopes with daylight-bright illumination and true 1x: ATACR and NX8 1-8 x 24 F1. The NX8 has a wider field of view (FOV) than ATACR (35.3m vs. 32.0m) at 100m, while both have the same 4.4m FOV at 8x. In reciprocal, the ATACR has a larger 11.3mm exit pupil at 1x in contrast to the 7.9mm of the NX8. Indeed, the author found the ATACR easier to mount during brief handling at the show.

The ATACR has a 34mm tube and weighs more at 21 ounces in comparison to the NX8 with 30mm tube and 17 ounces. ATACR features capped turrets while the NX8 utilizes exposed turrets. Optically, the ATACR utilizes ED glass while the NX8 shares the same elements as the NXS line. The illumination utilizes diffractive grid technology and is powered by a CR2032 battery that lasts about 130 hours. As of writing, the ATACR is on schedule to ship early spring.

DOUBLESTAR

In addition to their staple line-up of AR-15 parts, upper receivers and complete firearms, DoubleStar introduced the Strongarm pistol brace that fits an AR-15 buffer tube and retails under $100. The arm loop is ambidextrous, and the provided sling stud can be mounted on either side.

LEWIS MACHINE & TOOL

LMT is releasing a short, 7-inch barrel, 40mm grenade launcher with an option for a pistol-grip-only for breeching. This allows users to keep their rifles as light as possible. Its breech is long enough to accommodate the largest of 40mm ammunition.

In addition, the partnership with Laurence Livermore Laboratory bore fruit in the form of an innovative flow-through suppressor. Screwed into standard threads, the muzzle design compresses gases exiting the bore to form a “virtual baffle.” This redirects most of the gases around a longer alternate path to prevent them from “chasing” the projectile. This continuous flow of gases reduces back pressure so that cyclic rate remains constant. Company representatives quoted that this design rapidly vents back to ambient pressure, greatly reducing heat transfer from gas to suppressor body. As such, this design is machine-gun rated and is expected to last the lifetime of a barrel. As part of the testing, LMT subjected the suppressor to a continuous 1,000-round belt from a MK48 with no problems. Lastly, LMT representatives indicated the large exit diameter is designed to mitigate muzzle flash. LMT’s suppressors range from a mere 8 ounces (titanium Confined Space Weapon integral suppressor) to 34 ounces (for 7.62 belt-fed machine guns). Dimensions range from 1.5 to 2.1 inches in diameter and 6.5 to 8.6 inches in length. Most of the suppressors are an over-the-barrel design which minimizes the added length when mounted.

SAMSON

Samson is bringing pistol products to market for the first time in 2018, offering the Pocket Comp, Compact Magwell and Carry Contour +1 Magazine Extension for the Smith & Wesson M&P9 Shield. Pocket Comp, machined from 7075 aluminium, blends with the slide profile to reduce felt recoil. It threads onto a ½ x 28-inch threaded barrel, and the set screws are tightened against a muzzle adaptor to prevent damaging the threads. It functions with the factory recoil spring. While 124gr or heavier projectiles are recommended, 115gr ammunition may work depending on environmental condition and load specification. The patent-pending Compact Magwell requires no gunsmith to install and allows a full firing grip on the M&P9 Shield. It also allows the expended magazine to drop free without shifting one’s grip. Lastly, the Carry Contour Magazine Extension adds one more round to the factory 7- and 8-round magazines while utilizing factory magazine springs. The leading edge forms a finger grove to give additional purchase during one-handed reloads or malfunction clearance.

GEMTECH

Gemtech is bringing back the wipe-based pistol caliber Aurora with a new design. Measuring only 3.4 inches long, 1.125 inches wide and weighing 3.5 ounces, the suppressor features 13.5mm x 1 left-hand threads on one end, with ½ x 28 inch threads on the other end to accommodate many different pistols. The light weight obviates the need for a Nielson device. The polyurethane wipes are optimized for a service life of 30 to 40 rounds of FMJ only, after which the package must be sent back to the manufacturer to “repack” the wipes. The small, light-weight and cost-effective suppressor allows one to protect hearing on a nightstand or duty firearm.

The company is also releasing a rifle caliber Trek II with the same baffles designed to reduce backpressure. This suppressor features an improved mounting surface to reduce weight by roughly 1 ounce while including a pre-drilled hole for permanent attachment to barrel. This relieves the need for an SBR tax stamp if the combination measures over 16 inches long. The Trek II also utilizes a new weldless design that is serviceable at the factory while retaining the iconic Gemtech front cap with 3/8-inch drive socket.

HECKLER & KOCH

In addition to offering new colors for VP9 frames and Crimson Trace modules for both VP9 and VP9SK, HK continues to expand their US manufacturing spaces and staff in Georgia. The company is expected to begin US manufacture of MR556 rifles and HK45 pistols. Continuing the long-standing relationship between HK and B&T, the two companies partnered to launch an HK line of suppressors for the American market. Lastly, HK joined Hogue in releasing a family of knives: 3.25-inch partially serrated Exemplar Folder, 3.375-inch Hadron Automatic and 3.75-inch Karma Response Tool with glass breaker and strap cutter in addition to the partially serrated edge.

FIGHTLITE

For 2018, FightLite offers compact models of their SCR rifle and MCR belt-fed machine gun in both 5.56 NATO and 300 Blackout. The new Raider pistol is a compact pistol version of the SCR, while the MCR Micro has a shortened barrel. Aside from the shortened gas system and handguard, the Micro shares parts with the full-sized MCR. The company has also indicated that an MCR belt hold pawl is in prototype stages.

SCHMIDT & BENDER

Following up on the 1-8 x 24 CC scope, the 1-8 x 24 CC Dual model features an illuminated first focal plane reticle and a daylight-bright dot in the second focal plane. The version for use with Bundeswehr G28 Patrol rifles has a BDC elevation turret and extra 0.2 mil adjustments at either ends of the travel for CQB use. Customers can also opt for turrets with no over-travel and marked in mils only. The scope also features “more tactile clicks” where the “click” takes more effort every 1 mil and at zero windage for low light use.

The aforementioned diffractive grid technology replaces the split-beam prism for FlashDot illumination. The illumination passes through a grid and forms constructive and destructive interference patterns in order to achieve peak amplitude at the eye. This technology is currently featured in the 1-8 x 24 CC Dual, Polar Second Focal Plane reticles and LR reticles.
In the veins of incremental improvement, S&B now offers a magnification throw lever that is compatible with some current scopes and all new models. Future PM models and current 3-20 x 50 Ultra Short plus 5-25 x 56 High Power scopes feature a locking windage turret with a protruding nub to indicate dialing left. The nub is retracted when dialing right. Also on display is a 3-21 x 50 prototype for hunting and competition use with both First and Second Focal Plane options as well as locking turrets.

AIMPOINT

The recently released CompM5 continues to be in the spotlight. The sight has the same 2MOA dot and overall size of the Micro T-2 but utilizes an AAA battery mounted in the same fashion as the CompM4, as well as changing body material to 7075 aluminium. The original Micro T-1 was made of 6061 Aluminium with a 6-in-lb torque spec; the steel screw could strip the threads if misused. The Micro T-2 incorporated a steel Heli-Coil thread insert in the 6061 body to give roughly three repair attempts if the 12-in-lb torque specification were exceeded. The CompM5 changed materials to 7075 Aluminium to maintain the 12-in-lb specification without the need for a Heli-Coil. In addition to the new product, Aimpoint is releasing a limited-run of Micro T-2 sights in Flat Dark Earth.

VORTEX OPTICS

1-6 x 24 Razor Gen II-E reduced weight by about ¼ pound while maintaining the same durability and optical performance of its successful older brother. Different material and lightening cuts in the turret assembly gave the weight savings. Vortex is adding 4-24 x 50 and 3-18 x 44 variants to the Strike Eagle entry-level scope line-up. The new Crossfire Red Dot sight is very reasonably priced and includes a skeletonized mount with two height options. Lastly, Vortex is expanding their target observation portfolio with the Viper HD spotting scopes and Kaibab HD binoculars.

TRIJICON

Released earlier, company representatives indicated that the RMR Type 2 continues to be a strong seller. Optimizing for pistol use, Trijicon strengthened the electronics and battery contact in the Type 2 to sate the fast-growing demand of optics-equipped pistols. In addition, the new 4-16 x 50mm Accupoint bolstered the portfolio of tube scopes with dual fibre optic / tritium illumination.

SIG SAUER

The trend of releasing rifles in pistol form continues with the SIG MCX Rattler, which has a 16-inch overall length when folded and is available in both 5.56 NATO and 300 Blackout. The low profile design features a shaved shell deflector and the more vertically angled pistol grip. The two-position gas regulator can handle suppressor back pressure while the upper can be installed on a standard AR-15 lower with the assistance of a conversion kit.

SIG also debuted the P365 micro-compact pistol featuring a 10+1 capacity and standard night sights. The pistol ships with one flush and one extended magazine, along with modular grips. In addition, a commercial version of the M17 is anticipated for release in the second quarter of 2018.

PATRIOT ORDNANCE FACTORY

Following up the success of their Revolution rifles, POF is releasing the G series Gentlemen’s Slide for Glock 17, 19 and 34 with cutouts to fit the Trijicon RMR. A Glock 43 slide without RMR cutout is soon to be released. Made of 17-4 billet stainless steel and H900 heat treated, it is finished in nitride for protection and durability.

SPYDERCO

Spyderco debuted several new edged tools for 2018. The Warrior Hawk features a faceted front, a spike and a pry tip. It is made of D2 tool steel with a G10 handle. The US-made Shaman folder utilizes a thick CPM S30V blade with a plain or serrated edge option and secures with Spyderco’s patented Compression Lock. The 2.5-inch blade Lil’ Native, employing either a back or Compression Lock, was developed with urban-friendly carry in mind. Lastly, the Sliverax flipper folder has an S30V blade and a carbon fiber / G10 laminate handle.

COMBINED SYSTEMS

The less-lethal-focused company offers grenade launchers and four munitions: aerosol, chemical, impact and flashbang. While the company is best known for its flashbang, it also has the highest injury potential from overpressure and heat in close proximity. The company takes safety seriously and requires customer agencies to have staffs that were trained within the past four years before selling flashbangs. In 2018, Combined System is looking to expand their breeching portfolio, to potentially include 40mm in addition to current 12ga munitions.

KNS PRECISION

Adapting to the increasingly common use of suppressors and red dot sights on pistols, KNS partnered with Dead Air Armaments to develop the Switch Sight. When flipped down to standard height, it remains compatible with standard holsters while completely clearing red dot sight (e.g., Trijicon RMR) view windows. When rotated 90 degrees to increase height, it clears the top of most suppressors while acting as a backup-sight for red dots. This product is currently in prototype phase.

The adjustable AK piston system on display is already in production. Two versions (one or two vent holes) allow users to fine tune for 5.45 x 39mm or 7.62 x 39mm rifles with a rotating sleeve to control gas venting. It is noteworthy that the KNS piston does not require the difficult process of changing gas block. Company representatives indicated that the adjustable piston slows down the rate of fire to achieve better control and reduces “piston pop” to decrease noise by 5 to 8dB when used in conjunction with a suppressor.

TEAM WENDY

Team Wendy is debuting a lower profile EXFIL Ballistic SL helmet that is rated to NIJ Level IIIA. The helmet is lighter by 15% and sports a new rail mount with 1913 rails forward for light, camera, etc. The new EXFIL Ballistic Visor (featuring lens made by ESS, part of Oakley) and Ear Covers (compatible with in-ear communication and hearing protection) guard against fragments and are ready for sale along with the helmet in March.

OHIO ORDNANCE

New from Ohio Ordnance in 2018 is the M249 drop-in Select-Fire trigger group. It follows the same vane as their patented M240 Select-Fire trigger group while boasting multiple patents itself. Also new is the OOW240 Patrol that reduces weight from 28 pounds to under 21 pounds with lightened parts, dimpled short barrel and M4 collapsible buttstock. The bipod was moved from the gas block to an underside rail that can accommodate a foregrip and other equipment. Lastly, the HCAR is being made available as a pistol as well.

AERO PRECISION

Launched at the show is the new R1 Rail. The company representative also mentioned that a serviceable, 30-caliber suppressor to be fully made of titanium is in the prototype stage. While the direct thread version is anticipated first, the end goal is to develop a QD mount compatible with the VG6 line of muzzle brakes.

DANIEL DEFENSE

Adding upon the previously released MK18 pistol, the 10.3-inch barrelled DDM4V7 is now available in pistol form chambered in either 5.56 NATO or 300 Blackout. Equipped with the SB Tactical SOB brace, users can also choose to add a Law Tactical adaptor for a 20.75-inch folded length.

Building upon its Aimpoint Micro mount, Daniel Defense is introducing a 30mm single-ring mount for the likes of Aimpoint Comp M3 and PRO as well as a cantilever mount made from 6061 Aluminium for 30mm and 1-inch scopes. The bottom half of the ring is integral to the mount with torque specifications engraved to remind users.

LEUPOLD

Two Mark 5 HD scopes are new for 2018: 3.6-18 x 44mm and 5-25 x 56mm using 35mm tubes. The series feature a three-revolution elevation turret with 10 mils per revolution, along with physical indicators to prevent users from “being lost in the dial.” In the first revolution, the zero lock protrudes while the pin is flush. The second revolution retracts the zero lock while the pin is still flush. The third revolution keeps the zero lock retracted while protruding the pin. When running the elevation dial across the zero stop, the lock automatically secures the turret at “0.” An extra 1 mil adjustment is included below the zero stop to accommodate point-of-impact shift from suppressor or clip-on night vision. The throw lever gives quick and smooth zoom adjustments and is placed to avoid blocking the rifle bolt handle at maximum magnification.

The new VX Freedom series provide entry level 1-inch scopes, with the 2-7x and 3-9x models being rimfire-specific. Also of note is the new rubber armoured RX2800. The 2800-yard-capable range finder continuously ranges as long as the button is held down.

KINETICS RESEARCH GROUP

Against the backdrop of $1000USD precision rifle chassis, KRG is offering the $350, 2.9-pound Bravo Chassis for short- and long-action Remington 700 as well as Tikka T3. Although the price and specifications differ slightly amongst versions, all feature tool-less adjustable check piece and ship with three spacers for length of pull fitment. The bottom of the stock can be smooth or hooked (for rear bag) by undoing a screw to remove a cover. For bedding, the chassis utilizes an aluminium backbone that runs to the tip of the forend. For feeding, it utilizes the ubiquitous Accuracy International magazines. For now, the chassis is only available for right-handed rifles.

FN AMERICA

Newly available to US law enforcement and military, the SCAR SC is a select-fire 5.56 x 45mm subcompact carbine with non-reciprocating charging handle and telescoping buttstock. Sporting a 7.5-inch barrel, the overall length can be collapsed to 21.1 inches. In addition to the PDW type stock, other options available through FN Herstal for international customers include a helmet version meant to accommodate face shields as well as a standard SCAR stock. FN representative indicated there are no current plans for a commercial semi-auto version or additional stock options for the US market at this time.

On the commercial side, FN is offering an AR pistol version of their popular FN15 chambered in 5.56 x 45mm and 300 Blackout, with a brace available as an accessory for a one-stop-shop. The company is also offering California- and Maryland-compliant versions of the FN15. Lastly, there is a limited run of dual tone FDE & Black for pistols, FN15 Tactical II and M249S.

QUANTICO TACTICAL

The newly available Hunter Data Board builds on the Sniper Data Board (already in operational use) with the addition of a bubble level in the mounting arm. Attaching to the top Picatinny rail of a rifle, it reduces rifle cant and folds out to provide quick Data on Previous Engagement (DOPE) reference while maintaining cheek weld. The company representative described this product as “by snipers, for snipers;” inspiration stemmed from a target escaping while the sniper changed body position to reference his sleeve mounted DOPE card. With the Hunter/Sniper Data Board, the card is inserted into a water resistant holder which velcros to a 6061 Aluminium assembly. This US-made product provides a ready reference while increasing awareness. The Sniper Data Board can be retrofitted with the Hunter arm. The Hunter/Sniper Data Board will be available soon through Quantico Tactical’s extensive GSA Schedule.

GORILLA AMMO

The company offers ammunition with a polymer body and metallic case head to achieve 30% weight reduction in 5.56 x 45mm, 7.62 x 51mm and other popular calibers. The company representative related the enhanced accuracy and reduced chamber temperature. As the polymer case does not transfer as much heat to the chamber walls, the heat is expelled with the gases instead.

BERETTA

Beretta acquired Victrix Armaments and is now offering the 50BMG Corvus as a new addition to their precision rifle line. The rifles are made in-house in Italy with barrels sourced from Benchmark in the US and coated with PVD so as to not require oil. Although the rifles are fixed caliber (e.g., no swap kits to go from 7.62 x 51mm to 6.5 Creedmore), the Victrix line-up covers a variety of calibers such as short-action 7.62 x 51mm, long-action 338 Lapua Magnum, 408 Cheytac and the venerable 50BMG.

MEOPTA

The storied Czech optics manufacturer debuted a new line of tactical red dot and magnified sights. MeoRED T Mini has a more square shaped lens while the T2 Mini has a tube body similar to the Aimpoint T2. The T2 offers three reticles: single dot, two dots for hold-over and a circle-dot reticle. Scheduled for release in May, the MeoRED T is a tube type, full-size, red dot sight utilizing a AA battery for a minimum 2000hr run time at medium brightness. All red dot sights can be paired with the new MeoMag 3x Magnifier for versatility.

The MeoACE 3 x 20mm scope features an etched Ballistic Drop Compensating reticle culminating in a AA-illuminated chevron. The right half of the stadia is calibrated for 5.56 x 45mm and 180gr 7.62 x 51mm, while the left half is calibrated for 7.62 x 39mm.

KNIGHT’S ARMAMENT COMPANY

Two new QDC suppressors are offered: CS and PRS with the former designed for carbines and the latter for precision rifles. Both are designed to reduce back pressure and are expected to ship in the second quarter. A company representative remarked upon their effects in reducing group sizes.

Of interest to “clone” builders, KAC will offer “The Vault” line this year where a rotating selection of legacy accessories is reissued. Four free float RAS AR-15 handguards are slated for 2018: Carbine, Too Long, Mid-Length and MRE. One run is scheduled for the end of first quarter with another in the third quarter. Additionally, KAC is also reissuing the XM9 snap-on wipe based suppressor.

MAGPUL
Hunter American Stock—Ruger American Short Action

Magpul is releasing the Hunter American stock made from reinforced polymer and an anodized aluminum bedding block with steel recoil lugs. The Magpul Hunter American stock offers users a cost-effective replacement featuring a fully adjustable length of pull, comb height and enhanced ergonomics. Compatible with Ruger American Short Action rifles, this stock requires no bedding and is a true “drop-in” solution for the end user.

FEATURES

• Compatible with Ruger American short action rifles*
• Bolt Action Magazine Well—Hunter American & PMAG 5 7.62 AC included for reliable detachable box magazine compatibility without any need for custom inletting
• Reinforced polymer construction with Type III Hard anodized, machine finished cast aluminum bedding block
• High strength steel recoil lugs
• Compatible with barrel profiles up to medium palma
• Fully adjustable length of pull
• Optional 0.00-in, 0.50-in and 0.75-in cheek risers available to adjust cheek weld (stock comes pre-fitted with 0.25-in riser)
• M-LOK compatible for additional accessories

*NOTE: PMAG 5 7.62 AC magazine is for the .308 Winchester and similar-sized cartridges. Rifles that use smaller or larger cartridge cases will require the customer to separately purchase an AICS pattern compatible magazine of their choice. magpul.com

GEMTECH
5.56 Suppressed Bolt Carrier

The GEMTECH Suppressed Bolt Carrier is a drop-in replacement and will allow the shooter to choose between suppressed (S) and unsuppressed (U) settings without any permanent modifications to the firearm. No longer will you need to change gas blocks, buffers or any other components. Not only that, but with the GEMTECH Suppressed Bolt Carrier, there is a reduction in carrier speed and less felt recoil, bringing the cyclic rate of the suppressed rifle down to unsuppressed levels. gemtech.com

TUFFY SECURITY PRODUCTS
Model 257 Professional Grade Heavy Duty Truck Bed Security Drawers

Tuffy Security Products offers four Model 257 professional grade Heavy Duty Truck Bed Security Drawers perfect for securing valuable tactical gear. Tuffy’s Model 257 Heavy Duty Truck Bed Security Drawers have easy-to-install, heavy duty steel mounting hardware to attach to the pickup’s bed floor, and the drawer assembly can be removed by loosening the mounting hardware.

These security drawers feature superior engineering and are made in the U.S. from 16-gauge steel, with ¼-inch thick (6.35mm) steel latch components and tough structural top-cross supports for exceptional durability. Each drawer can hold up to 400lbs (181.4kg) and ride on slides with precision ground stainless-steel sealed roller bearings to evenly distribute weight for smooth, reliable operation. Designed for outdoor use, the drawers close tightly into the enclosure opening, using premium weather seals to combat moisture and dust intrusion.
Using tab-loc welded construction, plus a pick-resistant, 10-tumbler double-bitted lock, combined with Tuffy Security Products’ patented Pry-Guard II locking system, the Model 257 security drawers withstand severe duty use, while deterring theft.

The Model 257 Heavy Duty Truck Bed Security Drawers fit full-size Chevrolet/GMC, Dodge/RAM, Ford and Toyota pickups, plus the Navistar International CXT, and are offered in six sizes for short, standard and long beds. tuffyproducts.com

STREAMLIGHT
Ultra-Light and Low Profile TLR-7 and TLR-8

Streamlight Inc. added two new low profile models to its extensive line of TLR rail-mounted tactical lights, the TLR-7 and the TLR-8, which also features an integrated red aiming laser. Extraordinarily lightweight, the new lights are among the smallest rail-mounted lights in the TLR line; each delivers 500 lumens for a variety of tactical uses.

Securely fitting to a broad range of weapons, the new TLR lights feature a one-handed, snap on and tighten interface that keeps hands away from gun muzzles when attaching or detaching them. The lights also include a safe off feature, locking them so they cannot be turned on accidentally. A key kit is included to securely fit each light to the broadest array of hand guns of any light on the market.

The TLR-7 offers two lighting modes, LED-Only or LED strobe, each with a run time of 1.5 hours. The TLR-8 also offers a 640-660nm red laser that increases the user’s ability to focus on a target. The light can be deployed in Laser-Only mode to keep the gun on target; in LED-Only mode to provide bright, focused light; or in dual mode using both light sources. Run times are 1.5 hours in LED-Only, LED and Laser, and strobe modes and 18 hours in Laser-Only mode. The new models feature an IPX7-rated design, making them waterproof to 1 meter for 30 minutes. streamlight.com

SPYDERCO
Delica 4 Lightweight Knife

Cleaning and adjusting just got easier with Spyderco’s fine-tuned Delica 4 model’s screw construction. The fiberglass reinforced nylon handles come molded with Bi-Directional Texturing for preferred traction and improved ergonomics. Inside the handle dual skeletonized stainless steel liners make the knife stronger without adding weight and make an anchor for all external and internal components to attach through adding sturdiness and rigidity.

Their VG-10 blades are flat saber-ground with a stronger tip and larger 13mm opening hole. Added to the blade’s spine is slip resistant jimping. Phosphor bronze washers smooth out the open/close action and the clip is upgraded to a four-way tip-up, tip-down, left- or right-handed clip. spyderco.com

GERBER
Center-Drive Multi-Tool

Gerber’s new multi-tool offers uncompromising performance through revolutionary design. The innovative center-axis driver opens to align like a real screw driver, yielding maximum torque and rotation. No productivity is sacrificed with the addition of a 30% longer outboard blade and one-thumb opening sliding jaws. Full size, real tools—the multi-tool just got a reality check. gerbergear.com

NIGHTFORCE OPTICS
FC-MOA, FC-MIL and FC-DM Reticles

Nightforce Optics, leading manufacturer and marketer of premium sport optics and related products including riflescopes, spotting scopes and accessories announces the introduction of three, innovative first focal plane reticles optimized for low-power variable riflescopes. The FC-MOA and FC-MIL reticles are featured on the newly released Nightforce NX8 1-8×24 F1 riflescope, while the FC-DM outfits the newest addition to the ATACR family of riflescopes, the ATACR 1-8×24 F1. nightforceoptics.com

FC-MOA and FC-MIL Reticles

• First focal plane reticle
• Elevation and windage markings are valid at every magnification setting, providing precise hold and reference points
• At low power, the bright daylight center dot and segmented circle are visible under the harshest light, allowing fast, accurate shots
• At higher magnification, the clean 1 Minute of Angle (MOA) markings of the FC-MOA and .5 and 1 Mil-Radian markings of the FC-MIL reticle provide easy hold points for moving targets, wind and elevation hold-offs or for reference
• Bold, pointed lines at 3, 6 and 9 o’clock help draw the eye to the center at any magnification
• Available in the Nightforce NX8 1-8×24 F1 riflescope
• FC-DM Reticle
• First focal plane reticle
• The 10 Mil-Radian grid allows for precise holds within the reticle
• At low power, the daylight bright center dot and segmented circle are visible under the brightest of conditions, allowing for fast and accurate target acquisition
• The clean .5 and 1 Mil-radian (Mil) markings provide easy hold points for moving targets, wind and elevation hold-offs or for reference markings
• Reference dots are spaced every 1 Mil down to 10 Mils, allowing for hold-offs and shot corrections
• For more precise engagements and use at longer ranges, the additional features of the reticle provide fast and easy elevation and windage holds
• Available in the Nightforce ATACR 1-8×24 F1 riflescope

MAGPUL
Magpul Pro 700

The Magpul Pro 700 Rifle Chassis is an uncompromising, full featured precision rifle chassis for short action Remington 700 actions and other Remington 700 footprint actions. The Pro 700 combines innovative engineering, precision machining, Mil-Spec quality finishes and an extensive list of purposeful design features with complete adjustability to provide demanding end users with the most comprehensive available precision rifle platform solution for true out of the box performance.
Based on a full billet aluminum skeleton and clad in Magpul polymer for environmental comfort, noise mitigation and ergonomics, the Pro 700 is also fully ambidextrous. Capable of fitting both right- and left-handed actions with the simple swap of a bolt-cutout plate, and with a reversible cheek riser and reversible hinge on the folding version, “lefties” haven’t been “left out.” magpul.com

FEATURES

• Type III hard-anodized machined 6061-T6 billet aluminum V-bedding block, body, adjustment knobs and forend with high strength injection molded polymer body covers
• Ambidextrous bedding block can be changed by swapping the QD sling swivel plate and bolt cut out plate for left or right hand actions using a 1/8-in hex wrench
• Folding stock with push-button activated durable steel hinge with Melonite finish is reversible for left or right folding capability with the use of a 5/32-in hex wrench. A fixed stock adapter is available for a non-folding stock solution
• Folding stock is also designed to avoid interference with the bolt handle when folded and is compatible with a large variety of aftermarket bolt knobs and handles
• Optional inline mount for clip-on night vision and thermal imaging devices
• Overall LOP adjustment range is 13.25in–15.125in
• Butt pad height can be adjusted up 1.33in and down .90in and is adjustable left or right 5 degrees

B&T

The B&T suppressor for the HK MP5 and the B&T APC9 is one of the most widely used suppressors in the world. It has not only been NATO qualified (NSN: 1005-17-117-8913) but it is also selected by Heckler & Koch as their OEM suppressor of choice. The suppressor was chosen because of its reliable functioning, ease of use and long service life. The use of special alloys, hi-tech coatings, years of end user feedback and of course the famous Swiss quality makes the B&T suppressor for the HK MP5 the first choice of professional users who require a rugged, reliable and easily maintained suppressor.

MODEL HK MP5 + B&T APC9
CALIBER 9 x 19 mm (9 mm Luger)
LENGTH 208 mm / 8.2“
DIAMETER 35 mm / 1.37“
WEIGHT 300 g / 10.5 oz
FACTORY-TESTED SOUND REDUCTION 33 dB (A) dry
MATERIALS Aluminum
FINISH Black, hardcoat anodized
WEBSITE www.bt-ag.ch

The B&T MP9 / TP9 is the weapon of choice of many security details, intelligence units and special Police teams all around the world. Whenever the operation requires a suppressor, the B&T MP9 suppressor is first class. The unique quick detachable (QD™) attachment means that any operator can securely and safely mount the suppressor in a matter of seconds with one hand. The suppressor offers an additional Picatinny/NAR rail for mounting mission specific items like lights or lasers.

MODEL B&T MP9 / TP9
CALIBER 9 x 19 mm (9 mm Luger)
LENGTH 206 mm / 8.1”
DIAMETER 50 mm / 1.9”
WEIGHT 485 g / 17.1 oz
FACTORY-TESTED SOUND REDUCTION 34 dB (A) dry
MATERIALS Aliminum
FINISH Black, hardcoat anodized

Dead Air Silencers

The Ghost M is a modular multi-caliber pistol/subgun suppressor. A centerfire pistol suppressor rated all the way up to 300 blk sub-sonic. It is full auto rated and features a unique patent pending modular design. In the short configuration you have the smallest & quietest .45 can in its class. To be scary quiet, the Long configuration with wipes is the way to go. While not needed for the Ghost to function, the Ghost M front end cap can house a wipe, maximizing its performance.

MODEL Ghost M
CALIBER .22 LR, .300 BLK (subsonic), .40 S&W, .45ACP, 10mm, 9mm
LENGTH Full: 8.75”
Compact: 6.2” 1.06”
*(Weight and length will vary with various attachments) 6.2 oz.
DIAMETER 1.375″
WEIGHT Full: 12.0oz
Compact: 9.6oz* CerakoteTM
FACTORY-TESTED SOUND REDUCTION See chart attached
MATERIALS A combination of 17-4 stainless steel, titanium, and anodized 7075 aluminum materials
FINISH Cerakote Boxy, Nitrided Attachments
WEBSITE https://deadairsilencers.com/products/ghost-m/
MSRP (USD) $949

AK and Combloc rifle owners rejoice. The Wolverine PBS-1 is a state-of-the-art direct thread silencer that fits your favorite rifles. Don’t worry about non-concentric muzzle threads, the Wolverine addresses that. It also strikes a perfect balance of muzzle suppression and blowback the AK is notoriously known for. With numerous thread inserts available, we’re sure the Wolverine will fit right in with your collection.

MODEL Wolverine PBS-1
CALIBER Multi – Up to 7.92×54
LENGTH 7.4” (with thread adapter)
DIAMETER 1.5” Tube, 1.93” Outside Diameter
WEIGHT 19.8oz – 24.4oz depending on mount
FACTORY-TESTED SOUND REDUCTION See chart attached
FINISH Cerakote Body, with Nitrided parts
WEBSITE https://deadairsilencers.com/products/wolverine-pbs-1/
MATERIALS A combination of 17-4 stainless steel, titanium, and anodized 7075 aluminum materials
MSRP (USD) $1099
WEBSITE https://deadairsilencers.com/products/ghost-m/
MSRP (USD) $949

Elite Iron

The STFU was designed for .30cal rifles and is all of stainless construction. The design removes horizontal point of impact shift sometimes experienced with an un-timed suppressor. The STFU can used on rifles chambered in .308 and 30.06 class cartridges, and 300WM class cartridges with 24 in. barrels.

MODEL STFU
CALIBER .308/30-06/ 300WM
LENGTH 7.875”
DIAMETER 1.625”
WEIGHT 22.8 oz.
FACTORY-TESTED SOUND REDUCTION 28 db
MATERIALS
FINISH
WEBSITE www.eliteiron.com/
MSRP (USD) $760

The Battledog was also designed around the AR-10 gas rifle in .308 to supply the tactical world with a small effective suppressor. There has been an increasing demand for more knockdown power in close quarter situations and the Battledog is an excellent choice.

The Battledog works excellent on the 7.62×39, 5.56×45 and .300 Blackout short barrel rifles and greatly reduces the breech blowback on these weapon systems.

MODEL Battle Dog
CALIBER 7.62×39/5.56×45/.300
LENGTH 6”
DIAMETER 1.625”
WEIGHT 16 oz.
FACTORY-TESTED SOUND REDUCTION Up to 40 db
MATERIALS Titanium,17-4 Stainless and Aluminum
FINISH CerakoteTM
WEBSITE http://www.ruger.com/micros/silent-sr/index.html
MSRP (USD) $449

Freedom Armory

FA Machine Works Minuteman TI and Grenadier suppressors have revolutionized modern suppressor design with Gas Indexing Technology (GIT), Patent No. US9,410,761 B2. GIT allows for the rotational orientation of baffles by the user so as to take advantage of the differences in pressures between handguns and rifles of the same caliber and thereby, providing optimum sound reduction for each. These lightweight, titanium suppressors also utilize Total Breakdown Technology (TBT) providing complete serviceability using common tools.

MODEL Minuteman TI
CALIBER .22LR thru FN 5.7×28
LENGTH 6 inches
DIAMETER 1 inch
WEIGHT 3.9 oz.
FACTORY TESTED SOUND REDUCTION 42db
MATERIALS Titanium
FINISH Cerakote (Black or FDE) or
Polished Natural Cerakote (Black or FDE) or
Polished Natural $550
WEBSITE FAMACHINEWORKS.COM
MSRP (USD) $600.00
Polished Natural adds $30 $905.00 / $930.00 / $980.00
Polished Natural adds $50

MODEL Grenadier
CALIBER 9mm / 45 ACP
LENGTH 6.8” / 7.4” / 8.5”
DIAMETER 1.375”
WEIGHT 9.9 oz./ 10.3 oz. / 11.4 oz.
FACTORY TESTED SOUND REDUCTION 32db-38db
MATERIALS Titanium

GEMTECH

The GEMTECH MIST-22 is the quietest integrally suppressed barrel available for your 10/22 Rifle. The MIST-22 is an astonishing 112dB to the shooter, quieter than an air rifle! With the same profile as popular bull barrels the MIST-22 is compatible with a huge variety of aftermarket stocks and receivers. The barrel is match grade and the GEMTECH G-Core technology makes cleaning a breeze.

MODEL MIST-22
CALIBER 22 LR
LENGTH 16.1”
DIAMETER 0.92
WEIGHT 1lbs. 5 oz.
FACTORY-TESTED SOUND REDUCTION 40 db
MATERIALS Military Grade Aluminum/Steel Barrel
FINISH Black Isonite
WEBSITE www.gemtech.com
MSRP (USD) $550

Ruger

The Ruger® Silent-SR® sound suppressor features best-in-class materials and advanced design, resulting in a lightweight, compact size and top-tier sound reduction. It was designed and built by Ruger utilizing the very latest in fluid dynamic simulation and computer numeric controlled (CNC) machining equipment. The Ruger® Silent-SR® is easy to disassemble and clean. Each piece snaps together to seal the baffles and keep the byproducts of combustion away from the tube and end caps. It is also strong and light, utilizing a titanium tube, aluminum rear cap, and stainless steel threaded mount, baffles and front cap. Ruger has selected the best material for each part to maximize strength and minimize weight without sacrificing durability.

MODEL Silent-SR
CALIBER 22LR/22WMR/17HMR
LENGTH 5.37”
DIAMETER 1.06”
WEIGHT 6.2 oz.
FACTORY-TESTED SOUND REDUCTION Up to 40 db
MATERIALS Titanium,17-4 Stainless and Aluminum
FINISH CerakoteTM
WEBSITE http://www.ruger.com/micros/silent-sr/index.html
MSRP (USD) $449

Surefire

The RYDER 9 Modular suppressor is designed to be the best option available for overall length and maximum sound suppression capable. With the modular installed the RYDER 9M performs the same as the best-in-class RYDER 9 suppressor; however, if overall length is a concern the 2” modular can be removed only losing a nominal amount of sound reduction. As like the RYDER9, the RYDER 9M is disassemble for cleaning of the stainless steel baffles and Titanium tube. Each baffle is numbered for ease of reassembly and each suppressor comes with an assembly tool which includes a threaded baffle alignment rod and pusher. Available in either the ½-28 thread or M13.5×1 LH threaded Piston which is also available separately. Proudly designed, produced and assembled in the United States.

MODEL SF RYDER 9M-TI
CALIBER 9MM
LENGTH 5.9”/7.9”
DIAMETER 0.92
WEIGHT 8.5 oz./11oz.
FACTORY-TESTED SOUND REDUCTION 20-25dB
MATERIALS Titanium Tube, Front Plate, Rear Cap, Stainless Steel Baffles
FINISH Cerakote finish
WEBSITE www.surefire.com/tactical-equipment/sound-suppressors/sf-ryder-suppressors.html
MSRP (USD) $999.00

The SOCOM300-SPS suppressors is designed for the specific characteristics of .300BLK firing both Subsonic and Super Sonic ammunition for maximum sound suppression. This suppressor is also capable of being fired on 5.56MM though 300WIN when using bolt action rifles with the same great sound suppression capability. This is achieved with the SureFire patented V-baffle designed which routes more gas through the core than would be seen with other suppressors. The 300-SPS boasts the same rock solid Fast-Attach® lock ring as seen on all of the SOCOM and SOCOM2 series of suppressors. As with every SureFire SOCOM series of suppressors accuracy, repeatability, durability, long service life and signature reduction to include sound, flash and limiting environment disruption is engineered and produced in the US with only the top quality of material available.

MODEL SOCOM300 SPS
CALIBER 5.56MM to 300 WM
LENGTH 8.0”
DIAMETER 1.5”
WEIGHT 6.2 oz.
FACTORY-TESTED SOUND REDUCTION 120dB – 300 Black Out Subsonic, 129dB – 7.62×51
134dB – 5.56, 137dB – 300 WM
MATERIALS High-temp alloy & stainless steel
FINISH Ionbond and Cerakote™ finish
WEBSITE www.surefire.com
MSRP (USD) $ 1075.00

Thompson Machine

Industry-leading dB reduction, fool-proof disassembly and re-assembly (with only 3 total parts), and an affordable price tag are just a few of the features that set the Isis22 apart. Top that off with a full-auto and .22Mag/.17HMR rating on rifle hosts and you’ve got a suppressor that is ahead of the pack.

MODEL Isis 22
CALIBER .22LR/.22Mag/.17HMR (Full-Auto Rated)
LENGTH 6.5”
DIAMETER 1.125”
WEIGHT 4.2 oz.
FACTORY-TESTED SOUND REDUCTION 41 db
MATERIALS Hard-Anodized 6061-T6
FINISH Hard-Anodized Matte Black
WEBSITE www.ThompsonMachine.net
MSRP (USD) $315

The Poseidon series of silencers by Thompson Machine shatters the mold for how small a centerfire pistol silencer can be while still being effective. The Poseidon 9mm is impossibly small and light at only 4.125” in length and 4 ounces, but still delivers hearing-safe performance on most 9mm hosts. Equally at home on pistol hosts, or pistol-caliber carbines, the Poseidon is a must-have piece of kit for ultra-compact suppression.

MODEL Poseidon
CALIBER 9MM & 45 Models available
LENGTH 4.125” (9mm) 4.5” (45)
DIAMETER 1.25” (9mm) 1.375” (.45)
WEIGHT 4 oz. (9mm) 5.2 oz. (.45)
FACTORY-TESTED SOUND REDUCTION 20-25 db
MATERIALS Hard-Anodized 6061-T6
FINISH Hard-Anodized Matte Black
WEBSITE www.ThompsonMachine.net
MSRP (USD) $379 (Poseidon 9mm) $399 (Poseidon .45)

APTUS Weapon System

DRD Tactical | www.drdtactical.com

DRD’s new APTUS weapon system in 5.56 Nato or 300BLK calibers is designed using their patented quick change barrel and internal recoil system on a direct gas-operated rifle.

With Magpul folding stock, the weapon can be fired with the stock folded unlike standard AR platforms. This allows the operator to quickly change the barrels to fit the mission. All lower parts and some BCG parts are M4 compatible. It can go from PDW to DMR in less than 1 minute.

BY17SOR2 CARA CARA 2

SPYDERCO | www.spyderco.com

The all-new Cara Cara 2 Rescue features a high-visibility, orange-injected, molded FRN handle. For emergency cutting on a budget, this knife teams a Cara Cara 2 lightweight handle with a sheepfoot rescue blade.

Blade Steel: 8cr13mov stainless steel
Blade Grind: Hollow
Lock Type: Back lock mechanism
Handle Material: Fiberglass-reinforced nylon
Carry: 4-position hourglass pocket clip

STRYKE-2 Compensator

556 Tactical, LLC | www.556tactical.com

556 Tactical STRYKE-2 Compensator is available in 5.56 and 7.62. This new muzzle device will dramatically reduce muzzle rise as well as felt recoil, allowing for faster target acquisition. Three upward ports ease the side felt concussion and increasing target-acquire speed. With their STRYKE Face design this can be used for breaking a window, stamping a zombie on the forehead or tenderizing your favorite meat for grilling!

Dagger II Silencer

GEMTECH | www.gemtech.com

The updated GEMTECH DAGGER II is an all Titanium suppressor designed for semi-auto 18-inch 300WM precision rifles. The DAGGER II is the everyman silencer; it can be used on all lesser calibers, and its extreme strength lends itself for use on 12-inch .308 SBRs. This suppressor is held to the exacting SOCOM standards and passes with flying colors. The new feature allows ease of mounting and even has a predrilled pin hole for permanent fixture to short barrels.

H&K 3-Lug

GEMTECH | www.gemtech.com

GEMTECH World Class Silencers is happy to announce a new product to increase the compatibility of their 45 ACP silencers. The new H&K 3-Lug mount screws directly into GEMTECH’s Blackside, GM-45 and LUNAR Silencers for quick mounting on the standard 3-Lug mounts—popular on MP5s and modern pistol caliber carbines.

Cold Steel Frenzy

COLD STEEL INC. | www.coldsteel.com

The new for 2017 Cold Steel Frenzy draws inspiration from ancient Japanese Kabutowari, with a noticeably thick spine, slender blade, needle-sharp piercing point and long flat cutting edge. The Frenzy was designed by award-winning custom knife maker Andrew Demko and weighs just less than 6 ounces, making it thin and flat enough to comfortably carry. Premium American CTS XHP-powdered steel was chosen for the Frenzy’s 5.5-inch blade, and the knife is available in three different dual-tone G10 handle options: blue/black, OD green/black or grey/black.

Renegade Plus SPR

POF-USA | www.pof-usa.com

The Renegade Plus series embodies everything a direct impingement AR-15 can be. The initial offerings quickly became popular among shooters who push the limits of the .223/5.56 NATO cartridge. This extended range application warranted a new addition to POF-USA’s Renegade line up. New for 2017, POF-USA releases the Renegade Plus SPR. It still boasts the upgraded features the Renegade Plus is known for, such as a nine-position adjustable gas block, roller cam pin, heat sink barrel nut and more, but with an 18.5-inch barrel and adjustable Luth-AR MBA stock. These upgrades go well above mere aesthetics often found in rifles today.

NAS3 9mm Luger Cases

Shell Shock Technologies, LLC
www.shellshocktech.com

Shell Shock Technologies is an early stage technology and manufacturing company focused on developing innovative case technologies for the ammunition industry. Shell Shock is a component manufacturer supplying its lightweight NAS3 shell cases to the shooting sports market, as well as to U.S. and foreign ammunition manufacturers. Shell Shock’s NAS3 cases are 50% lighter than brass, give more consistent round-to-round performance and can be picked up with a magnet. 9mm Luger cases are immediately available (5.56mm cases available soon), with more calibers coming later in 2017. All Shell Shock’s cases are designed and manufactured in the U.S.

Spektre Inside-the-Waistband (IWB) Holster

HIGH THREAT CONCEALMENT (HTC)
www.Highthreatconcealment.com

High Threat Concealment’s (HTC) new Spektre Inside-the-Waistband (IWB) Holster is a no-compromise solution for those who want to comfortably conceal a fighting-sized handgun for their everyday carry. The Spektre provides maximum concealment and a comfortable custom-engineered fit for your weapon that can be worn strong-side IWB or in the appendix (AIWB) carry position. Each holster can be configured with one of three available attachment systems to better fit your preferred style of carry.

The Spektre is currently available for most popular semi-auto pistols. For most double-stack pistols, the Spektre will accommodate most popular pistol-mounted red dot optics. Shooters are also able to adjust the fitment and tension of the holster to suit their individual preference, using a custom tensioner that precisely adds or removes pressure from the holster’s capture feature. All holsters have an open bottom to enhance comfort and permit the use of after-market and threaded barrels.

FN USA ANNOUNCES NEW M249S PARA IN BLACK AND FDE

FN America, LLC, is pleased to announce the latest addition to the FN Military Collector Series—the semi-auto FN M249S Para or Paratrooper model, originally developed for airborne troops. Building on the company’s unique tradition of offering semi-automatic variants of the most popular military-designed firearms, the rifle will join the full-size FN M249S Standard and the FN 15 Military Collector M4 and M16. The M249S Para is the fourth in their series of classic, semi-automatic FN military rifles, and like the Standard, the Para is authentic to the last possible detail. You’ll notice only two major differences between the semi- and full-auto versions—the barrel length and reconfigured internal components to change the rifle’s operation from open-bolt to closed-bolt. Authenticity was critical in this series, and they changed as little as possible. The rifle features a machine-gun-grade, 16.1-inch, cold hammer-forged barrel, closed-bolt for semi-automatic-only operation, classic M249 flip-up feed tray, integrated steel bipod, robust gas-piston system and the iconic telescoping and rotating buttstock, making it lighter and more compact. The rifles will be available in either black or Flat Dark Earth (FDE). The guns will accept either 30-round M-16 style magazines or 200-round plastic ammo boxes. For more information you can contact FN America at www.fnamerica.com.

BATTLE RIFLE COMPANY INTRODUCES NEW CUTLASS MARITIME RIFLE

Battle Rifle Company has announced its all-new 2017 BR4 Cutlass rifle. The Cutlass is based on Battle Rifle Company’s best-selling Spectre Rifle and is specifically designed for MARSEC (Maritime Security) operations and shipboard usage. The Cutlass is built with care to ensure long-lasting life in extreme conditions. Its extended rail and low-profile gas block allow for more accessories to be installed, making it well-suited for shipboard, coastal and all-weather operations. They built the Cutlass so that no direct ferrous, metal-to-metal contact is made throughout the entire rifle, ensuring corrosion-free operation, even after months at sea. This rifle is perfect for shipboard operations, both coastal and riverine. If you live or work on the water, this gun is perfect for you! Additionally, Battle Rifle Company is introducing a new color for 2017. The MARSEC rifles will be available in the all-new Battle Rifle Ocean Blue—a marine gray-blue which provides a great contrast for this special rifle. For more information on Battle Rifle Company, visit www.battleriflecompany.com.

GEMTECH INTRODUCES NEW SUPPRESSORS FOR 2017

Gemtech has just introduced its first new suppressors for 2017. The first is their new LUNAR-45. The Gemtech Lunar-45 is the culmination of decades of silencer innovation. They have created the lightest and quietest modular .45 suppressor available that is able to be taken apart and cleaned. The Lunar-45 is crafted from military-grade aluminum and titanium for the utmost in durability and strength. The modular suppressor is available in either a short length (6.9 inches) or a long length (8.5 inches), depending on the shooter’s needs. The short suppressor is said to have a 136 dB noise reduction, and the longer version has a 129 dB reduction. Gemtech offers a variety of mounting options for the Lunar-45 allowing it to be used with a variety of platforms and calibers. The new suppressor is also full-auto-rated.

The other new suppressor is their INTEGRA, which is an AR-15 integrally suppressed upper receiver. The new suppressed upper will be available in both 5.56 and 300 BLK. Gemtech has teamed up with NEMO Arms to create the smallest and easiest-to-maintain package the shooting world has ever seen. The INTEGRA utilizes Gemtech’s proven G-Core Technology that is removable, cleanable and replaceable while still bringing the best sound reduction of any similar-sized package. The NEMO Arms patented gas block eliminates blowback, making this upper more comfortable to shoot. The barrels of both units offer either 10- or 10.5-inch lengths with integrated lengths of 16.1 inches overall. Information on all of Gemtech’s suppressors can be found at www.gemtech.com.

MEOPTA INTRODUCES NEW MEOTAC 3-12×50 RD

Meopta is pleased to introduce its newest tactical riflescope—the 34-mm MeoTac 3-12×50 RD.Designed for use on assault rifles, the MeoTac 3-12×50 RD is an excellent scope for medium-range engagement and is engineered to meet the needs of armed forces, security details and tactical shooters worldwide. This scope features MeoLux, Meopta’s most advanced lens coating. MeoLux, combined with Schott glass and expert design, enables 99.8% light transmission per lens surface allowing users to see better and farther in the most challenging light. The solid 34-mm, aircraft-grade aluminum tube allows for expansive windage and elevation ranges of 55 MOA and 100 MOA respectively with click adjustments of 1/3 MOA. The illuminated MilDot 3 RD reticle, located in the first focal plane, enables use of the range-finding elements of the reticle on any power setting. The new MeoTac 3-12×50 RD also features precision tactical mil-mil turrets with a large grip, easily distinguishable positive clicks and a zero-stop function. The side-focus parallax adjustment ranges from 27 yards to infinity, and the integrated illumination control is also located on the side of the center of the scope, making adjustment in the field quick, easy and convenient. The RD illumination system features a highly defined illuminated red dot reticle with 16 reticle intensity settings for all light conditions and intermediate off positions between every setting. The auto-off function will switch the illumination off if unused for one hour. The MeoTac 3-12×50 RD features Meopta’s MeoShield protective lens coatings, MeoQuick fast-focus eyepiece and an erector system designed for maximum holding force to withstand heavy caliber recoil. This scope also has an anodized exterior for scratch resistance and is waterproof and fogproof for maximum performance and durability. The MeoTac 3-12×50 RD is covered by Meopta’s North American lifetime transferable warranty. Find out more at www.meoptausa.com.

RUGER AMERICAN PISTOL IN .45 AUTO

Sturm, Ruger & Co., Inc., is proud to announce the addition of the Ruger American Pistol Compact in .45 Auto. This newest compact model is offered in the “PRO” configuration with no external manual safety. Originally introduced in December 2015, the feature-rich Ruger American Pistol was designed with the latest U.S. Military standards in mind and was tested in the harshest environments to ensure the rugged reliability consumers have come to expect from Ruger. Ruger polled law enforcement and military trainers throughout the country to select the form, function and features of the Ruger American Pistol. The resulting pistol combines a recoil-reducing barrel cam (which better spreads recoil over time) with a low-mass slide, low center of gravity and a low-bore axis to provide better balance, less felt recoil and less muzzle flip than comparable pistols. The Ruger American Pistol also features a pre-tensioned striker system, which allows for a short take-up trigger with positive reset, and a modular wrap-around grip system that adjusts palm swell and trigger reach to fit a wide range of hand sizes. With a 3.75-inch barrel, overall dimensions of 7.25 inches long, 4.65 inches high and a weight of 28.6 ounces, the Ruger American Pistol Compact model shares all of the features and rugged reliability of the duty-size gun in a smaller, lighter, more concealable package. It ships in a hard case with medium and large replaceable grip modules and two nickel-Teflon-plated steel magazines (one 10-round extended magazine and one 7-round compact magazine). The American-made Ruger American Pistol is built on a rigid, one-piece, precision-machined, stainless steel chassis with integral frame rails and fire control housing. Additional features include genuine Novak LoMountCarry three-dot sights, a stainless steel slide with a non-reflective, black nitride finish, a one-piece, high-performance, glass-filled nylon grip frame and a mil-standard 1913 accessory rail. For more information on the Ruger American Pistol Compact in .45 Auto or to learn more about the extensive line of award-winning Ruger firearms, visit www.Ruger.com.

LIBERTY SUPPRESSORS ANNOUNCES THE SOVEREIGN

Liberty Suppressors is proud to introduce their newest .30 caliber suppressor, the Sovereign. The Sovereign was designed for the precision rifle shooter, as well as for the hunting community. At just over 1.5 inches by 7.125 inches and only 12.7 ounces, this titanium silencer all but disappears on the end of a rifle. It comes with both 1/2-28 and 5/8-24 direct-thread adapters, as well as the 5/8-24 LS1 muzzle brake mount and a full complement of beyond-the-box accessories available for the upmost in versatility. They round out the package with a custom Armageddon Gear Suppressor Cover making the Sovereign one of the most adaptable and functional silencers on the market. Find out more about the Sovereign and the full line of Liberty Suppressors at www.libertycans.net.

During 2003 Gemtech announced the availability of the upgraded Outback II that had a threaded insert made of titanium, replacing the aluminum insert used in the first design.

By Frank Iannamico

For many years suppressor manufacturers have been offering their customers products that could not be disassembled for servicing. The primarily reason was a concern of the customer possibly incorrectly reassembling the internal components resulting in damage to the unit, or personal injury. During the 1970s the Military Armament Corporation experienced such a problem with their suppressors, and soon began to use a thread locking compound on their endcaps to discourage disassembly. Like many modern companies MAC suggested to their customers that they return their suppressors to the factory for servicing. This protocol is fine as long as the manufacturer is still in business, which in many instances might not be the case, like MAC have been out of business for many years. Generally speaking most companies will not service suppressors made by someone else.

The sound suppressors that require the most attention are those designed for .22 rimfire cartridges, an inherently dirty round. With a lot of use, a .22 caliber suppressor will gradually lose its efficiently, and at the same time get heavier with an accumulation of lead and powder residue. Cleaning suggested by many manufacturers is to immerse their sealed suppressors in a particular chemical solution, which does little or nothing to remove carbon fouling and lead. Previously, the thorough servicing of sealed suppressors had to be performed by the manufacturer, if they offered such a service. Factory servicing usually consisted of removing the old baffles and replacing them with new ones. When extreme fouling was present, and the old baffles could not be removed by normal methods, they often had to be machined out of the tube on a lathe. Baffle replacement is not possible by individual owners, because possession of individual suppressor parts is a felony. Federal laws do not allow the factory replacement of the serial numbered tube, unless the original is defective. Replacing the suppressor tube with a new one would require a second $200.00 transfer tax to be paid.

Returning a suppressor to the manufacturer for routine servicing can be inconvenient and time consuming for the customer. If the suppressor manufacturer is no longer in business, a heavily fouled, and increasingly loud suppressor, becomes nothing more than an expensive paperweight. The aforementioned reasons are why customers began to request that manufacturers offer suppressors they could service / clean themselves. As a result, companies have now begun to offer units that could be easily disassembled. The new serviceable suppressors usually come with special tools to remove the endcaps. Some manufacturers offered optional tools to push baffle stacks out of the tubes to minimize the possibility of damaging them. New baffle stack and monocore designs made it less likely that the customer could assemble their suppressors incorrectly.

Owners of older, factory sealed suppressors began to seek ways to upgrade their cans to a user serviceable configuration. Seeing a business opportunity, enterprising Class II manufacturers began to offer a service to open up sealed suppressors, and clean or replace their internal components. This service added a new term “jail break” to the NFA community lexicon, referring to the opening up a formerly sealed suppressor tube, making it user serviceable. Some suppressor manufacturers offer the service on their products, and there are a few independent companies that will perform the work on most suppressors, regardless of the manufacturer.

Now that user serviceable suppressors are common, there are a few caveats. If not disassembled and cleaned on a regular basis, the endcaps may be difficult to loosen and the baffles inside the tube can become extremely hard to remove. Attempting to disassemble a heavily fouled “user serviceable” suppressor can often result in damaged baffles or worse, a permanently damaged tube. There also exists a potential health hazard after exposure to lead and other contaminants present in a suppressor. However, as long as the suppressor owner remains aware of the negative aspects, they should not encounter any problems.

Suppressor Cleaning

After disassembly, there are a number of different methods for cleaning baffles and tubes. The options include chemicals, ultrasonic cleaning or media blasting. The method used on any particular unit depends on what materials were used in its construction. When possible always follow the manufacturer’s recommendations. Using the wrong method when cleaning suppressor components can lead to permanent damage. When using chemicals, be aware there can be potential health and environmental concerns when disposing of contaminated liquids.

The Gemtech Outback Suppressor

Gemtech’s Outback .22 caliber suppressors, first introduced in 1999, have been very popular among suppressor aficionados. The first Outback models had aluminum baffles inside a non-customer serviceable factory sealed aluminum tube. One concern customers expressed with the original Outback model were the ½-28 threads used to attach the suppressor to a barrel were also aluminum. Some were afraid that the aluminum threads could be easily stripped by over tightening or cross threading. According to the company, of the thousands of Outback suppressors sold, only two were returned to repair their threads. In both cases the threads were still safe and met ANSI standards. However, Gemtech listened to their customers and changed the thread insert to titanium on the new Outback II in 2003. Titanium was chosen over stainless steel because stainless threads have the propensity to gall if the weapon’s barrel threads are a few thousands oversize. Galling can make the suppressor very difficult to remove, increasing the chance of damage to both the barrel and suppressor.

The manual that came with the original Outback stated that the factory “discourages any attempt at disassembly of the unit. Internal parts orientation is critical to the efficient operation of the suppressor, and reassembly requires special tooling and jigs available only at the factory. Any attempt at disassembly will void the warranty”.

During 2011, Gemtech began to manufacture the user-serviceable .22 caliber Outback II D with a removable front cap. The rear endcap was secured with Loctite, as removal and replacement could affect alignment and runout. During manufacture, the titanium thread insert is internally threaded after the rear mount has been secured in place with Loctite to guarantee true running. The baffle stack can be pushed out from the rear with a 3/8” wood dowel.

At the same time, the company began to offer a customer program to update older Outback and Outback II suppressors with the latest baffle design and removable endcaps.

For their 20th anniversary in 2013, Gemtech offered their Limited Edition Outback II T model made of lightweight titanium. The tube of the Limited Edition Outback is a silver satin color.

During 2014 Gemtech introduced a new .22 rimfire suppressor, the GM 22. In place of conventional baffles, the new GM 22 features Gemtech’s patented G-Core, a one-piece CNC machined 7075 aluminum monocore design. In addition to .22LR, the GM 22 is rated for full-auto fire (.22LR only) and for .22WMR and .17HMR cartridges. The overall length of the GM 22 is 5-inches, with an outside diameter of 1-inch, and a weight of 2.5 ounces. The finish is high temperature MIL-A-8625 hard anodize. The one-piece G-Core design makes disassembly easy with common tools, and simplifies cleaning.

For customers who own older Gemtech Outback, Outback II, Outback II D or Alpine suppressors, the company offers the Improved Outback Upgrade program. The service includes opening up the original tube, removing the old baffles, and installing a new one-piece G-Core. After the upgrade the G-Core Outback is rated for .22WMR and .17 HMR calibers. The G-Core makes disassembly of the Outback for maintenance easy. The upgraded suppressor is returned to the customer in a new box with a manual, Molle pouch and G-Core patch. The G-Core upgrade can also be performed on number of competitor’s .22 caliber suppressors.

Gemtech also manufactures a Quick Detach Adapter system that allows the installation or removal of any .22 caliber suppressor in seconds. The adapter, made of high strength aluminum and stainless steel, is a smaller version of Gemtech’s popular 3-lug Quick Mount system used on their 5.56 and 7.62 suppressor applications.

To enhance suppressor performance, Gemtech offers their own brand of .22LR caliber ammunition manufactured to their specifications. The Gemtech ammunition features a special 42-grain round nose bullet with a premium lubricant and a cleaner burning powder. The subsonic velocity is 1050 feet per second. The brass case is engraved with the Gemtech logo headstamp.

With the outer tube removed you can see that the Mist assembly features a one piece G-Core baffle stack permanently attached to a ported 9 inch barrel. The ported barrel reduces the ammunition’s velocity so that most any .22 shell is subsonic.

By Chris A. Choat

Gemtech has been building silencers (or more properly “suppressors”) for over two decades. They actually started business in 1993 and have become a name synonymous with high quality, extremely quiet suppressors. They started with just a few core models and have built their line up to over fifty models of rimfire and centerfire suppressors. This author owns several of their suppressors and I am very satisfied with all of them. They are well built, durable, easy to clean and most of all, very quiet.

When I recently had a chance to test one of their new models I jumped at the chance. The new suppressor is called the Gemtech Mist .22 and it is a complete barrel assembly with integral or built-in suppressor for the Ruger series of 10/22 rifles. The new barrel/suppressor will fit all models of the Ruger 10/22 as well as aftermarket models, which there seem to be several of. The barrel of the Mist is ported and just a little shorter than 9 inches long. The suppressor core is permanently attached to the barrel making it a full 16.25 inches overall for legality reasons. The core or baffles of the suppressor is what Gemtech calls the G-Core Monolithic Baffle Stack. The “stack” is actually not a stack at all but a 1-piece core that does not come apart. This is much better than loose baffles that tend to get put back together in the wrong direction or out of sequence. To clean the Mist you simply unscrew the outer tube exposing the internal core which can then be easily wiped or scraped clean. This, by the way, can be done with the receiver and barrel assembly still
mounted in the stock.

For testing the barrel was mounted to a standard Ruger 10/22. The existing rifle had the somewhat plain birch wood with the classic barrel band at the front of the forearm. With this setup the Mist suppressor would not fit into the inletted barrel channel of the stock as the original rifle had the standard “pencil barrel”. The Mist’s outer tube diameter is .920, the same as the heavy barreled or target 10/22’s. I could have routered out the stocks’ barrel channel but then I would have had to cut off the front end, where the barrel band was located and refinish the stock to make it look right. Instead I chose to just install a Hogue Overmolded® rubber coated stock that was made for Rugers with the .920 diameter barrels. This particular stock does not have a barrel band and thus leaves the barrel free-floating. The stock has a rubber coating over its entire surface which gives it a very positive even “sticky” feeling grip texture.

The mounting of the suppressed barrel is very simple. You just remove the original barreled receiver from the stock and then remove the original barrel by taking out two Allen head screws that hold the barrel clamping block to the receiver. The barrel is then pulled out of the front of the receiver and the new barrel with the suppressor is pushed in. The clamping block is replaced, the screws tightened and the installation is complete.

Before I installed the new Hogue stock I replaced the stock trigger pack on the 10/22 with one of Ruger’s new BX Triggers. The BX Trigger from Ruger is an entire trigger pack that comes as a single unit. You merely push out two receiver pins, drop out the standard trigger pack and then replace it with the new BX Trigger pack unit. The new trigger is advertised as having a factory set pull of between 2.5 and 3 pounds. The trigger that I used had exactly a 3.0 pound trigger pull right out of the package. It also has a very crisp feel to it. Another great thing about the new trigger is that it has a retail price of just $89.95 and can be ordered direct from
www.shopruger.com.

With the trigger and new Hogue stock installed it was time to pick an optic. I had recently bought a couple of inexpensive scopes from a company called Olivon (www.olivonmanufacturing.com). One was the 3X9X40 IR Tracker Pro and the other was their 3X12X56 IR Tracker Pro. The 3X9 has a 1 inch tube and the 3X12 featured a 30mm tube. Both optics have illuminated red duplex reticles with 11 brightness settings and are both waterproof, shockproof and fog proof. I picked the 3X9 scope to mount on the 10/22 and it was the perfect match. The scope has a matte black finish which matches the gun and suppressor finish very well. The illuminated reticle made the gun perfect for low light varmint elimination. These scopes are very inexpensive but don’t let their prices ($85.00 and $125.00 respectively) fool you. They have extremely clear glass and excellent edge to edge clarity. The 3X9 scope proved more than capable on the 10/22.

The optic was bore sighted, a variety of different kinds of .22 ammunition was gathered up and we headed to the range. The rifle was sighted in from a bench at 50 yards as this was about middle ground for the distances that most of the shooting with this rifle would be done at. The ammunition included both subsonic as well as supersonic and was of both the copper plated and lead lubed lead bullet styles. We used CCI Subsonic, CCI Quiet, CCI Mini Mag, CCI Standard Velocity, Winchester Subsonic, Remington Subsonic, Gemtech Subsonic and some Federal High Velocity. All of the ammunition that was tried fed and functioned perfectly with the exception of the CCI Quiet which didn’t have enough power to blow the bolt open enough to eject the empty brass. Although it was the quietest by far it turned the 10/22 into a manually cycled single shot rifle. With all of the subsonic ammunition used the Mist equipped rifle was “scary” quiet. You could literally hear the bullets striking the target. Even with the supersonic ammunition such as the CCI Mini Mags the gun was quiet enough that at 100 feet from the gun you couldn’t tell it was a gunshot when the rifle went off. It was interesting to note that even with the ported barrel the subsonic loads such as the Remington and Gemtech, the rifle functioned perfectly with no failures to feed or eject.

Accuracy of the rifle was checked with the original barrel and then later with the Mist suppressed barrel installed. With every type of ammunition used, all of the loads were more accurate when shot through the Mist suppressed barrel! This is not that unusual as this author has found that most times when a suppressor is installed on a firearm the accuracy improves. Accuracy with the Mist suppressed 10/22 was outstanding. The gun was fired off of a bench using a Harris bipod up front and a rear sand bag. Five shot groups could easily be covered with a quarter and some could be covered with a nickel. In fact, entire 25 round magazines could be fired into one ragged hole.

In conclusion I would say that the Gemtech Mist equipped Ruger 10/22 is probably one of the quietest .22 guns that can be had. Probably the only thing quieter would be a bolt-action .22 rifle equipped with an integral suppressor such as the Mist. The ideal set-up would be a Mist made for the Ruger 77/22 bolt action rifle. The Gemtech Mist .22 Suppressor is made to fit only the Ruger 10/22 rifles or Charger pistols but maybe they will make one to fit the 77/22 at a later date. Installed on a 77/22 the Gemtech Mist would be the ultimate in quiet. The Gemtech Mist .22 barrel/suppressor has a retail price of $550.00. For a suppressor that can be disassembled for cleaning and provides the kind of noise reduction that it does this is definitely a bargain. When you order one, be sure to also order some of Gemtech’s Subsonic .22 ammunition. This is a combination that is hard to beat.

GEMTECH
P.O. Box 140618
Boise, ID 83714-0618
1-208-939-7222
www.gem-tech.com

By The Small Arms Review Editorial Staff

Company: GEMTECH
Model: The ONE
Caliber: 7.62 NATO / 308
Length: 7.5”
Diameter: 1.625 with Shroud
Weight: 16.3oz
Factory Tested Sound Reduction: 32dB
Materials: Titanium & Inconel
Finish: High temp black Cerakote
Website: www.gemtech.com
MSRP: $1099

This is the ONE suppressor to go to for any application you could want. GEMTECH has answered customer demand with our newest addition to our Extreme Duty line. With caliber ratings from short 5.56 full-auto to 300WM, it’s the only rifle suppressor you’ll ever need. Made of Titanium and Inconel, not only does it perform to SOCOM standards, but it won’t weigh down your overall set-up. Caliber Rated: 300WM, 300BLK, 7.62 NATO, 5.56 NATO

Company: Liberty Suppressors
Model: Cosmic
Caliber: 45 ACP
Length: 8 “ (Suppressor Module Only)
Diameter: 1.375”
Weight: 9.5 oz
Factory Tested Sound Reduction: 22-24 dB Reduction
Materials: Stainless / Titanium
Finish: Type C Cerakote
Website: www.libertycans.net
MSRP: $799

Liberty Suppressors is a family owned company specializing in making some of the quietest suppressors on the market. Quality coupled with the best customer service in the industry is what we do best. The Cosmic is no exception, with great suppression and rated for over 70 calibers, Liberty has set a new benchmark in the industry.

Company: EliteIron
Model: BATTLEDOG
Caliber: .308
Length: 6”
Diameter: 1.625”
Weight: 16oz
Factory Tested Sound Reduction: 28db
Materials: 17- 4 Stainless Steel
Finish: Cerakote
Website: www.eliteiron.com
MSRP: $760

From today’s need for lighter, stronger suppressor systems comes the EliteIron BATTLEDOG. Each suppressor comes as a 3-piece system to include muzzle brake and cover cap for thread protection which also acts as a blast mitigation device when shooting unsuppressed. Each BATTLEDOG is meticulously hand assembled and TIG welded for incredible strength and reliability. Advancements in material and technology make the BATTLEDOG truly full-auto rated. Putting an end to all the noise about suppressors.

Company: SRT Arms
Model: Shadow XL TI
Caliber: 7.62 NATO / 308
Length: 9.3”
Diameter: 1.5”
Weight: 16 oz
Factory Tested Sound Reduction: 34 db on 16” barrel .308, 33 db on 20” barrel 300 Win Mag.
Rated for: .308, 30-.06, 300 MW, .300 UM, 30/338, and any smaller calibers than .30.
Materials: 6Al-4V Titanium with 316 stainless steel blast baffle
Finish: Cerakote
Website: www.srtarms.com

.385” baffle and endcap aperture is forgiving for minor barrel thread misalignment to bore. Patented AZTECH baffle is symmetric and does not require any “clocking” of suppressor to barrel. Any minor POI shift is always straight down from unsuppressed. Measures at 133 db absolute on .308 and 134 db on .300 Win Mag 1 meter to left of muzzle to Mil-Std 1474D. 316 Stainless blast baffle eliminates sparking that occurs from Ti blast baffles.

Company: Rugged Suppressors
Model: Surge 762
Caliber: 30 Caliber
Length: 9” – Standard Configuration / 7.5” Short Configuration
Diameter: 1.5”
Weight: 21.5oz – Standard Configuration / 17.5oz Short Configuration
Factory Tested Sound Reduction: 133.4 – 138.4dB – .308; 131.5 – 137.3db – 5.56;
Materials: 17-4PH Stainless Steel; Stellite Baffle Core
Finish: Cerakote
Website: www.ruggedsuppressors.com
MSRP: $1300.00 with 7.62 flash hider

Rugged Suppressors, founded in 2014 by Henry Graham and Michael Derdziak, creates innovative products that upset the industry. We’re pioneering new materials and manufacturing methods that create superior suppressors you can trust to work right the first time.

We are committed to being the best silencer manufacturer in the United States by always focusing on positive customer interactions before and after the sale, producing cosmetically and functionally superior products, and a desire to continually outpace our competition through rigorous new product development and testing.

Company: Hailey Ordnance Company
Model: AeGIS
Caliber: .22LR
Length: 17.5” (8.5” barrel, 9” suppressor)
Diameter: 0.920”
Weight: Complete integral barrel 19-24oz
Factory Tested Sound Reduction: With Ruger 10/22, 18-23dB reduction depending on ammo
Materials: SS Lothar Walther Barrel, 7075-T6 Baffles, SS or Titanium Sleeve, optional Nitrided Steel Blast Insert
Finish: CeraKote or Matte Metal
Website: www.haileyord.com
MSRP: $550-675

The AeGIS by Hailey Ordnance Company improves on the conventional integral suppressor by including a patent pending externally adjustable gas bleed system and a Nitride hardened pressed in steel blast baffle. The Adjustable gas system allows a shooter to adjust the amount of gas being bled off behind the projectile to tune the rifle for maximum velocity, maximum sound reduction or to calibrate a specific ammunition to the subsonic threshold.

Company: (SEG) Stealth Engineering Group
Model: Competition
Caliber: .223 – .308
Length: 6.75”
Diameter: 1.55”
Weight: 14.5 oz
Factory Tested Sound Reduction: 35 dB reduction average
Materials: Titanium
Finish: Any
Website: www.SEGsuppressors.com
MSRP: $847

The SEG Competition suppressor is an evolution of the only symmetrical suppressor on the market. SEG already has competition shooters switching for our accuracy, we wanted to give them even more reason. January 2016 after testing with various shooting teams, SEG released the Competition Hancock™. The result is the least amount of bullet shift and most consistent suppressor that actually suppresses. A guide hole is included for single stamp SBR pinning.

Company: (SEG) Stealth Engineering Group
Model: SURG Suppressed Upper Receiver Group (Integral)
Caliber: .223 – .300 Blackout
Length: Barrel Length 16”
Diameter: 1.55
Weight: < 5 lbs.
Factory Tested Sound Reduction: 30-40 dB
Materials: Titanium/SS
Finish: Any
Website: www.SEGsuppressors.com
MSRP: $2000

To fully understand the scope of the SURG project you must review the spec. (Suppressed Upper Receiver Group) This project will pioneer the transition for our military to integrally suppressed rifles. SEG saw this coming and has been developing the solution well before the spec was released on November 28, 2015. SOCOM has allowed us to sell this technology to the US public. Its not just an integral suppressor, much more goes into the design that makes only ours successful.

Company: SilencerCo
Model: Hybrid
Caliber: 9mm to .45–70 GOV. Full Auto Rated. Magnum Rated Up To .338, Lapua Magnum with 18” Barrel or Longer
Length: 7.8”
Diameter: 1.565”
Weight: 13.8 oz., (with Direct Thread Mount)
Factory Tested Sound Reduction: 125.7 dB to 140.6 dB
Finish: Grey Cerakote
Website: www.silencerco.com
MSRP: $999.00

The Hybrid™ is the silencer for any platform. Compatible with calibers ranging from 5.56mm to 9mm, .45–70 GOV to .458 SOCOM, and many in between, the Hybrid is both full auto and magnum-rated and can be used on pistols, rifles, and submachine guns. Boasting low-120 dB’s on 300BLK and remaining hearing-safe with .45–70, the Hybrid offers an unparalleled pairing of versatility and performance – a combination you’ve come to expect from SilencerCo products.

The Hybrid is rated down to 16? barrels for .45–70 and .458 SOCOM and down to 18? barrels for all magnum calibers up to .338. With a slew of compatible accessories available, you can turn the Hybrid into the perfect silencer for any demand.

Company: Yankee Hill Machine
Model: Phantom, Ultra Light Tactical (YHM-4300s)
Caliber: 30 Cal (.17 HMR through .308 Winchester.)
Length: 7.625”
Diameter: 1.6”
Weight: 13 Oz.
Factory Tested Sound Reduction: -32 dB
Materials: Grade 9 Titanium with Heat Treated Inconel Blast Baffle
Finish: Natural Titanium or Black Cerakote®
Website: http://yhm.net/30-cal-ultra-light-tactical-2067.html
MSRP: $1130.00

YHM .30 Cal Phantom Tis are light enough to leave on your rifle while navigating your environment, and are equally effective for Close Quarters situations or long-range shots. All models in the series are full-auto rated, and downward compatible to YHM 5.56 Quick Detach mounts, for fast redeployment on another host firearm. Choose from Titanium or Black Titanium, Direct Thread or Q.D. Mount.

Company: Yankee Hill Machine
Model: Sidewinder, 9mm (YHM-3240)
Caliber: Available in 9mm, .40Cal and .45 Cal
Length: 7.8”
Diameter: .375”
Weight: 10 Oz.
Factory Tested Sound Reduction: -36 dB
Materials: Aircraft Grade Aluminum and Stainless Steel Components
Finish: Matte Black Plated
Website: http://yhm.net/9mm-sidewinder-sound-suppressor.html
MSRP: $699.00

YHM’s 9mm Sidewinder is the new standard in pistol caliber suppression. Many special features work together to keep weight down while offering Hearing Safe decibel reduction. The Sidewinder is constructed of Aircraft Grade Aluminum Tube and Baffle and 17-4 Stainless Steel mounting and wear components. This combination of materials creates a durable, dependable and cost-effective solution to any shooter. A 300 BLK adapter is sold separately to allow the operator to fire 300 BLK Subsonic loads through the YHM Sidewinder Suppressor on fixed barrel rifles. The Sidewinder is also rated for autofire
and use on SMGs.

Company: AWC Silencers
Model: THOR PSR
Caliber: .308 – .338
Length: 8”
Diameter: 1.625”
Weight: 18.6oz
Factory Tested Sound Reduction: -32db – -34db (MIL-STD Testing on Surgeon Rifles CSR in .308 with 16” Barrel)
Materials: Titanium
Finish: Matte Cerakote
MSRP: $1095

Designed for elite US Military users, the THOR PSR over-the-muzzlebrake suppressor was engineered by AWC in partnership with Surgeon Rifles. The suppressor mounts over the included muzzle brake for a faster attachment method that maintains the accuracy and repeatability of traditional direct-thread suppressors.

Company: Tactical Solutions
Model: Ascent22
Caliber: .22LR, .22 WMR, .17HM2, .17HMR
Length: 5.9”
Diameter: 1.0”
Weight: 4.1oz
Factory Tested Sound Reduction: 38dB
Materials: 6AL-4V Titanium, 6061-T6 Aluminum, 304 Stainless
Finish: Matte Black Anodize
Website: www.tacticalsol.com
MSRP: $360.00

New for 2016 is Tactical Solutions lightweight and versatile rimfire Ascent22 suppressor. This user serviceable suppressor is designed with our patented split tube that makes cleaning the suppressor extremely easy. The Ascent22 features DiamonDyze™ coated baffles, a titanium thread adapter and blast baffle for increased heat and wear resistance. Please visit us at www.tacticalsol.com

Company: Surefire, LLC
Model: SOCOM556-RC2
Caliber: 5.56 mm
Length: 6.2”
Diameter: 1.5”
Weight: 17 oz.
Factory Tested Sound Reduction: 136 dB on Mk18 10.5” using 70g ammunition
Materials: High Temp Alloy & Stainless Steel
Finish: Cerakote (Black or Dark Earth)
Website: www.surefire.com
MSRP: $1095.00

The new and improved SureFire SOCOM556-RC2 Fast-Attach® suppressor is the most advanced 5.56 mm rifle suppressor ever made. Compact and lightweight, our SOCOM suppressor was selected for the Mk18 and M4 by US Special Operations Command as first among all competitors in the most extensive and rigorous suppressor evaluation in history. This test covered all aspects of suppressor performance, and SureFire beat every other entry. It has also received the USSOCOM official safety verification in support of fielding. Constructed of advanced high-temperature alloys and stainless steel, the SOCOM556-RC2 features a more advanced internal venting to reduce back pressure, reducing the suppressed cyclic rate and gas blowback on the operator. The new design also includes an integrated blast shield in the back section that increases durability. The patent-pending front-plate design along with proprietary improvement in gas-flow dynamics nearly eliminates first-round flash, a true technological breakthrough in this area. It also attenuates noise and dust signatures to an unprecedented degree. A new indexing system and computer controlled welding means this suppressor securely mounts to a SureFire muzzle brake or flash hider even more solidly than our previous models, and is easier to remove after extended firing since the index tab is in a low carbon-buildup area. Like all SureFire Fast-Attach models the SOCOM556-RC2 produces minimal, consistent shift in point of impact compared with the unsuppressed weapon.

Company: FA Machine Works
Model: Grenadier
Caliber: 9mm / 45 ACP
Length: 6.8” / 7.4” / 8.5”
Diameter: 1.375”
Weight: 9.9 oz. / 10.3 oz. / 11.4 oz.
Factory Tested Sound Reduction: 32db – 38db
Materials: Titanium
Finish: Cerakote (Black or FDE) or Natural
Website: www.famachineworks.com
MSRP: $905.00 / $930.00 / $980.00

FA Machine Works Grenadier centerfire pistol suppressors are composed of titanium. Their light weight and extreme durability create a revolution in the suppressor industry. TBT (Total Breakdown Technology) provides complete serviceability with common tools and user configurable baffles with patent pending GIT (Gas Indexing Technology) enhance the revolutionary design. The Grenadier 9, Grenadier 9 CQB, and Grenadier 45 suppressors have multi-caliber capability and select caliber full auto rating that provide from 32-38db sound reduction collectively.

Company: Sturm, Ruger & Co., Inc.
Model: Silent-SR 22 LR Suppressor
Caliber: 22 LR, 22 WMR, and .17 HMR
Length: 5.37”
Diameter: 1.06”
Weight: 6.3 oz.
Factory Tested Sound Reduction: 40 dB to 113.3 on Bolt Action .22 LR
Materials: Titanium, 17-4 Stainless Steel, & Aluminum
Finish: Matte Black Cerakote
Website: www.Ruger.com/Silent-SR
MSRP: $449

Ruger has built great threaded rimfire firearms for years, and now offers a great silencer to match. The Silent-SR™ features best-in-class materials and advanced design, resulting in a light, compact and quiet suppressor. Each piece snaps together to seal the baffles making it easy to disassemble and clean. The Ruger® Silent-SR™ utilizes a titanium tube, aluminum rear cap, and stainless steel threaded mount, baffles and front cap. Go to www.ruger.com for more information.

Company: Barrett
Model: AM30
Caliber: 30 and less
Length: 8.3”
Diameter: 1.5”
Weight: .775 lbs
Factory Tested Sound Reduction: -25-30 dB
Materials: Titanium Alloy
Finish: Cerakote
Website: http://barrett.net
MSRP: $1151

Model: AM338
Caliber: 338 and less
Length: 9.9”
Diameter: 1.75”
Weight: 1.29 lbs
Factory Tested Sound Reduction: -23-28 dB
Materials: Titanium Alloy
Finish: Cerakote
MSRP: $1530

Model: DC30
Caliber: 30 and less
Length: 8.3”
Diameter: 1.5”
Weight: .775 lbs
Factory Tested Sound Reduction: -25-30 dB
Materials: Titanium Alloy
Finish: Cerakote
MSRP: $1151

Model: DC338
Caliber: 338 and less
Length: 9.9”
Diameter: 1.75”
Weight: 1.29 lbs
Factory Tested Sound Reduction: -23-28 dB
Materials: Titanium Alloy
Finish: Cerakote
MSRP: $1530

Barrett is the world leader in large-caliber rifle design and manufacturing. Well-known for .50 caliber rifles, the company now produces rifles in .416 Barrett, .338 LM, .308 WM, .300 Win, .338 NM, 7mm Rem Mag, .260 Rem, 6.5 Creed, 5.56 NATO, 6.8 SPC and .300 Blackout calibers, and is a growing innovator in the design and production of accessories for long-range shooters.

Company: MackBrothers
Model: Helium
Caliber: 7.62
Length: 7”, 8” and 8.9” depending on configuration.
Diameter: 1.52 inches
Weight: 13 oz, 13.5 oz and 15 oz depending on configuration.
Sound reduction: 32 to 34 db
Materials: Titanium, 17- 4 stainless
Finish: Cerakote
Website: Macbros.com
MSRP: $1250.00

Mack Brothers was founded in 1997 to meet the needs of the business within the firearms community. We have supplied various military and firearms manufacturers worldwide.Having a serious interest in sound suppressors we have put together products that we are very proud of. Lifelong sportsmen of South Dakota we know what it takes for products to survive in the field.

The TranQuilo M308 was designed for precision .308 rifles with a 5/8-24 threaded muzzle (1/2-28 adapters also available). The internal design redirects blowback, reducing dangerous back-pressure materials and contaminants that typically encounter the user’s face. An open, angled, four-prong flash-reducing tip reduces muzzle flash. The Muzzle-Brake Adapter is also 17-4 Stainless Steel, featuring a dual-shouldered design seating the suppressor in perfect alignment to the bore, eliminating gas from escaping to the rear of the suppressor.

Company: LaRue Tactical
Model: TranQuilo Corto
Caliber: 308
Length: 6.125”
Diameter: 1.50”-1.75”
Weight: 16 oz
Sound Reduction: Not Available
Materials: 17-4 PH Stainless Steel and Incoloy A-286
Finish: 17-4 PH Stainless Steel
MSRP: $499.00

Model: TranQuilo M308
Caliber: 308
Length: 8.0”
Diameter: 1.50”-1.75”
Weight: 23 oz
Sound Reduction: Not Available
Materials: 17-4 PH Stainless Steel and Incoloy A-286
Finish: 17-4 PH Stainless Steel
Website: www.larue.com
MSRP: $699.00

The TranQuilo Corto is a shortened version of the M308, intended for use on 300 Blackout and 5.56 SBR’s (5/8-24 and 1/2-28 adapters available). Like the M308, the internal design redirects blowback, reducing dangerous back-pressure materials and contaminants that typically encounter the user’s face. The adapter is 17-4 Stainless Steel, featuring a dual-shouldered design seating the suppressor in perfect alignment to the bore, eliminating gas from escaping to the rear of the suppressor.

Company: Thompson Machine
Model: 30Ti
Caliber: 7.62mm
Length: 8.375”
Diameter: 1.48”
Weight: 17oz
Db Reduction: 31db
Material: Titanium and Stainless
Finish: Matte Ti
Web: www.ThompsonMachine.net
MSRP: $1095

The Thompson Machine 30Ti stands out in the centerfire rifle suppressor market. While Titanium construction has become common in recent years in sealed rifle suppressors, Thompson Machine set the 30Ti apart by designing it as a take-apart suppressor for easy cleaning and inspection of its Monocore baffle stack. Constructed of grades 5 and 9 Titanium and stainless steel, the 30Ti is quiet, light, rugged, and user-serviceable.