Hyskore Introduces Black Rifle Machine Rest and Armorers Vice

The new Hyskore Black Gun Machine Rest allows the user to sight in and find out exactly how accurate the gun is. It progressively absorbs the recoil pulse by employing two long (110mm) stroke nitrogen filled compression dampers assisted by adjustable coil springs. This gives it the unique ability to handle everything from .22 LR to .375 H&H. With previous machine rests you had to change dampers for different calibers. In addition, the dual rail design of the Black Rifle Machine Rest accommodates pistol grips and high capacity magazines allowing it to be used with 30- or even 40-round magazines of any caliber. The gun can be fired from the shoulder, using the buttstock strap, directly off the shoulder without the strap, or with the strap and secured in the vise for repeatability testing. The entire vise assembly can be removed to expose a platform for rest bags and a remote hydraulic trigger release is included with the rest. The rest has ambidextrous windage adjustment knobs and ball bearing elevation adjustment. The rest even has mounting tabs to bolt it to your shooting bench. Also new from Hyskore is their new Armorer’s Vice. The portable Armorer’s Vise can be used at the workbench or at the range. It is a versatile gun servicing fixture that clamps to a bench top and rotates 360º around a horizontal axis. A gun can be held at any required angle for all cleaning and servicing procedures. Both new products can be used with bolt guns as well as “Black Guns.” For more information on these and an extensive line of fine firearm accessories please contact Hyskore, Dept. SAR, 193 West Hills Road, Huntington Station, NY 11746. Phone: (631) 673-5975. Fax: (631) 673-5976. On the web at www.hyskore.com.

Troy Battlemags Now Shipping

Troy Industries is pleased to announce that they have started shipping their much anticipated CBIR (Chemical, Biological, and Impact Resistant) polymer Battlemags to industry dealers and distributors. These magazines have been involved in a lengthy research and development phase, in which time they have come under severe punishment and testing. They have survived not only loading and feeding evaluations, but also destructive product testing, such as being shot with shotguns, high powered rifles, crushed by vehicles, frozen and baked in extreme temperature ranges. All magazines then functioned flawlessly after the for-mentioned torture tests, and the visual results can been seen on the Troy YouTube video channel. Stephen Troy, Troy Industries President and CEO, declared that the magazines will offer the end-user the most durable and comprehensive magazine on the market today. The CBIR Battlemag is currently offered in a 30-round 5.56mm/.223 version. They are available in black, flat dark earth, OD green, and coyote tan. Every magazine includes a flush and shock absorbing bottom floor plate. Battlemags work flawlessly with all M4, M16, AR-15, HK416, and FN SCAR rifles and carbines. Other features include a proprietary engineered resin, reinforced feed lips, anti-tilt follower, and an aggressive fish scale gripping pattern. You can contact them at Troy Industries, Inc., Dept. SAR, 151 Capital Drive, West Springfield, MA 01089. Phone: (413) 788-4288. Fax: (413) 383-0339. On the web at www.troyind.com.

New Sightmark Night Vision Monocular

Venturing into the dark of night can be an unnerving experience, but with the Sightmark Eclipse 2×24 Gen 1 Night Vision Monocular, outdoorsmen can feel right at home even in the darkest places. Inspired by military and law enforcement applications, the Sightmark Eclipse features multi-coated optics and a wide-angle field of view to give you a crystal clear, dynamic image. The built-in IR illuminator extends viewing capabilities even farther allowing you to acquire your target even in the darkest situation, without them seeing you. With three different magnification options in the Eclipse Series, the monoculars are both powerful and reliable, with up to 72 hours of continuous operation without a battery change; you will never have to worry about suddenly and unexpectedly being plunged into darkness. Accessories include a tripod adapter, carrying case and an attached lens cover to prevent losing the lens cap on late night outings. For more information contact Sightmark, Dept. SAR, 2421 Callender Road, Suite 123, Mansfield, TX 76063. Phone: (817) 225-0310. Fax: (817) 394-1628. Website: www.sightmark.com.

Woolrich Introduces Discreet Carry Jacket

Woolrich Elite Series Tactical introduces the Elite Discreet Carry Twill Jacket, the latest addition to the company’s line of concealed carry outerwear. Based on one of Woolrich’s most popular traditional jackets, the Dorrington, the Elite Discreet Carry Twill Jacket has a number of tactical features built in. Large, reinforced inner pockets feature integrated holster loops to accommodate concealed carry handguns with up to a 6-inch barrel. A unique double angle on the inner pocket provides ready access to gear, but prevents the pocket from flaring open and exposing the contents. The rear locker loop conceals the entrance to a hidden accessory tunnel, which allows for convenient yet discreet carry of plastic restraints as well as providing routing for electronic wires. Front hand warmer pockets contain internal accessory loops, perfect for carrying spare magazines, flashlights, batons or chemical sprays. These elastic loops are set at a 45-degree angle for optimized access and keep the items secure and in a consistent orientation for rapid deployment. The hip-length waistband and cuffs are fully adjustable and the jacket features a boulder-washed finish for a broken-in feel. The shell is made of 11.5 oz. cotton twill and is lined with a polyester Sherpa liner. Sleeves are insulated with diamond-quilted 60-gram Arctic Insulation. For more information on this and other tactical clothing please contact; Woolrich Elite Series Tactical, Dept. SAR, 1 Mill Street, Woolrich, PA 17779. Phone: (570) 769-6464. Website: www.woolrichelitetactical.com.

Revision Now Has Tan Desert Locust Goggle

Revision, leading developer of protective eyewear for militaries worldwide, introduces the Tan 499 Desert Locust Goggle Kit with enhanced camouflage for the warfighter. The new color configuration is designed to better integrate with the U.S. MultiCam uniforms currently in service in Afghanistan. The new kit features a Tan 499 frame and strap with MultiCam anti-reflective sleeve and carrying case. The Desert Locust Goggle is the first and only MultiCam eyewear on the U.S. Army Authorized Protective Eyewear List (APEL).

The Tan 499 Desert Locust Goggle combines the best ballistic protection and widest field-of-view with optimal fit and superior camouflage making this the ultimate goggle for extended use. Its high-performance OcuMax coated lenses protect against fogging and scratching while the filtered ventilated frame keeps sand, wind and dust at bay. The goggle exceeds ANSI Z87.1-2010 and military ballistic impact requirements; ensures flawless optics for distortion-free vision; and provides rugged durability to protect and perform through all the rigors of combat. The Tan 499 Desert Locust Goggle U.S. Military Kit retails for $99.99 MSRP. For more information you can contact them at Revision, Dept. SAR, 7 Corporate Drive, Essex Junction, VT 05452. Phone: (802) 879-7002. Fax: (802) 879-7224. On the web at www.revisionmilitary.com.

Desert Tactical Arms Introduces New Suppressors

Desert Tactical Arms developed the DTSS (Desert Tactical Sound Suppressor) to enhance accuracy, repeatability, and minimize impact shift between suppressed and unsuppressed fire. Testing shows consistent accuracy improvements of nearly 0.25 MOA when shooting with a DTSS. The full titanium construction makes the DTSS the lightest .338 caliber silencer on the planet weighing just 1.15 pounds. They offer both steel and titanium suppressors. The DTSS Silencer conveniently installs over the SRS-QD Brake. The baffle design tightens the Suppressor as gases impact the baffles, which prevents the Suppressor from loosening during high volume fire. Many competitors use a ratcheting lock to prevent their cans from loosening. Distance between ratchet teeth allows minor play even when tightened, which will degrade accuracy. DTSS are available in .30 and .338 caliber options and provide a high-to-low compatibility feature that allows the .338 caliber suppressor to attach to both .338 and .30 caliber muzzle brakes and prevents the .30 caliber suppressor from accidentally being installed on a .338 caliber muzzle brake. For more information you can contact them at Desert Tactical Arms, Dept. SAR, P.O. Box 65816, Salt Lake City, UT 84165. Phone: (801) 975-7272. Fax: (801) 908-6425. Website: www.deserttacticalarms.com.

New Products for AUG and MSAR from Manticore Arms

If you are tired of scraping and bloodying your knuckles trying to charge your Steyr AUG or MSAR rifle with an optic mounted, the Raptor Charging Handle by Manticore Arms solves this issue and provides benefits not found in the traditional charging handle. Manticore Arms, Inc., a developer of original firearm products from concept to market, has developed the Raptor Charging Handle as a specific solution for those tired of injuring themselves on the standard charging handle on the Steyr AUG and MSAR series of rifles. The horizontal design of the Raptor permits plenty of hand clearance even with a large optic such as an EOTech mounted on the low-height top Picatinny rail. The clearance is such that it can be pulled fully rearward and then folded upward to lock the bolt back, unlike the conventional handle. A quick slap of the Raptor levers it out of the rear lock back position, and the bolt goes home. The Manticore Arms Raptor Charging Handle projects horizontally to allow a more natural, ergonomic grip, and is sized for two fingers or gloved hands to grip the handle comfortably. Made in the USA of fiber reinforced polymer and weighing less than two ounces, the Raptor Charging Handle has no sharp edges to cut or tear, and is lightly textured. Best of all, just like the conventional handle, the Raptor Charging Handle retains the ability to fold safely out of the way when pressed against the body or any other object.

Also new from Manticore is their Brass Buster brass deflector. When shooting a Steyr AUG or MSAR rifle off your weak shoulder there is a very real risk of injury from ejecting brass striking you in the face or eyes. As a solution to this problem, the Brass Buster as an ambidextrous/reversible brass deflector designed to facilitate weak side shooting for all Steyr AUG and AUG clone rifles. It also facilitates safe shooting for those using a rifle not ejecting the proper direction for their dominant hand or eye, such as a left handed shooter using a rifle with a right side ejecting bolt. It can be installed or removed in seconds without any need for tools, adhesives, or Velcro. The Brass Buster is reversible and works whether your rifle is set up for right or left side ejection. Simply install the deflector “T” shield on the ejection port side of the gun. Both new products are compatible with all Steyr AUG rifles and clones including the, MSAR STG-556 (all generations) and E4. For more information you can contact them at Manticore Arms, Inc., Dept. SAR, 902 South Randall Road, Suite C #318, St. Charles, IL 60174. Phone: (603) 715-0334. Their website is www.manticorearms.com.

Rock River Arms Announces PDS Pistol

The Rock River Arms PDS Pistol is the first of a new generation of firearms employing Rock River Arms’ patent-pending Piston Driven System (PDS). Utilizing a purpose-designed bolt carrier, an adjustable gas piston and an over-the-barrel spring and guide rod arrangement, the Rock River Arms PDS is able to completely eliminate the traditional recoil system associated with AR-style firearms, making for an extremely versatile weapon platform. The design of the upper receiver and guide rod base prevents gas blow-by to the back of the receiver. The two position adjustable regulator is conveniently positioned on the right side of the regulator housing.

The New PDS Pistol has a full length top mounting rail from the rear of the receiver to the regulator housing, allowing flexible placement of numerous optics, lights, lasers and other accessories. The folding ambidextrous, non-reciprocating charging handles may be used independently or in unison to charge the RRA PDS Pistol. The RRA PDS Pistol features a Mil-Std 1913 rail on the rear receiver adaptor as well as a Mil-Std 1913 rail on the regulator housing that allows sling or weapons mounting capabilities. The handguard features an integral Operator Safety Flange to help prevent support-hand movement/slippage towards the muzzle. For more information please contact Rock River Arms, Inc., Dept. SAR, 1042 Cleveland Road, Colona, IL 61241. Phone: (309) 792-5780. Fax: (309) 792-5781. Website: www.rockriverarms.com.

Zel Custom Introduces Magazine-Fed .50 BMG Upper for AR-15s

Zel Custom Manufacturing introduces the Tactilite T2, a magazine-fed, bolt-action .50 BMG conversion for AR-15 style rifles. The T2 utilizes a side-mounted magazine design on Zel Custom’s unique steel billet upper receiver. As a “firearms accessory,” the Tactilite T2 .50 BMG conversion kit requires no special paperwork, background check or waiting period. The T2 receiver is CNC-machined from solid 4140 steel bar stock, heat treated for greater strength and durability, and features an integrated scope rail, for superior accuracy. The T2 comes standard with a 7075 aluminum quad-rail, black CeraKote finish and one 5-round Accuracy International magazine. Available options include choice of Mossberg or Lothar-Walther barrels, choice of barrel contour and choice of right- or left-handed receiver. Prices start at $2,298. For more information contact Zel Custom Manufacturing, Dept. SAR, 11419 Challenger Ave., Odessa, FL 33556. Phone: (303) 880-8701. Fax: (303) 265-9268. They can be located on the web at www.tactilite.com.

Ruger Introduces SR-556 Piston Driven Rifle in 6.8 SPC

Sturm, Ruger & Co., Inc. is pleased to announce the new Ruger SR-556/6.8, a new chambering in the popular SR-556 two-stage, piston-driven, AR-style rifle. The new SR-556/6.8 brings the power and downrange authority of the 6.8 SPC cartridge in a two-stage piston rifle that runs cooler and cleaner than traditional gas-driven, AR-style rifles. Packaged with one five-round magazine and two twenty-five round magazines, the SR-556/6.8 is an ideal hunting rifle for those who appreciate the versatility of the customizable and ergonomic AR-style platform. The 6.8 SPC has ample power for hunting medium-sized game, and the greater muzzle and downrange energy enhances the capability of the SR-556 in defensive or tactical roles as well. The SR-556/6.8 retains all the features of the original SR-556 that make it an outstanding value in the AR-style rifles. The patent-pending, two-stage piston delivers a smooth power stroke to the one-piece bolt carrier, which softens recoil, aiding both shooter comfort and durability of the rifle. The four-position gas regulator allows the shooter to tune the rifle to the ammunition being fired and environmental conditions present. A chrome-lined, cold hammer forged barrel provides accuracy and longevity, Troy Industries folding battle sights, quad rail and rail covers add considerable value to the package, as does the Hogue Monogrip, six-position stock, sight adjustment tool, and the padded carry case, all included with the SR-556/6.8. The SR-556/6.8 maintains the mid-length gas system and the heavy (.850″) barrel contour under the handguard of the original SR-556. The 1:10 twist barrel has a standard SAAMI 6.8 SPC chambering, is 16.12 inches long, is threaded 5/8-24, and is capped with the effective and distinctive Mini-14/SR-556 flash suppressor. The SR-556/6.8 weights 7.75 pounds without a magazine. For more information you can contact Sturm, Ruger & Co., Inc., Dept. SAR, 200 Ruger Road, Prescott, AZ 86301. Phone: (928) 541-8893. Fax: (928) 541-8850. Website: www.ruger-firearms.com.

New Black Gun Shooting Rest from Hyskore

Hyskore has just introduced their new Black Rifle Shooting Rest. This shooting rest was designed specially for black rifles with pistol grips and extended magazines in mind. It is constructed with two parallel rails that leave a gap in the center so that long magazines and pistol grips fit into the rest. This allows the gun so set lower in the rest so it can be shouldered easily. The solid, lightweight rest disassembles with a convenient self-storage feature. By undoing only 2 hand-knobs, the front leg brace can be moved to the top side of the rest where it can be reattached for transit and storage. This reduces the foot print of the rest by 60%. It also features 3-point leveling, a magnetic spirit level, front leather rest bag, rear rest platform and auxiliary buttstock strap. Many shooters like to use a rabbit ear rest bag to support the rear of the gun. With that in mind, the Black Gun Shooting Rest has a 4 inch by 5 inch ear platform beneath the removable padded yoke. This gives the shooter a wide range of options for supporting the gun. The rear elevation adjustment knob can be placed on either the left or right hand side of the rifle. The rest will accept guns with magazines up to 40-round capacity. For more information on this or any of their fine line of rifle rests please contact Hyskore, Dept. SAR, 193 West Hills Road, Huntington Station, NY 11746. Phone: (631) 673-5975. Fax: (631) 673-5976. Website: www.hyskore.com.