SETTING THE STAGE

The SPR was tentatively explored in the 1990s within certain SOCOM units. What started as a simple upper receiver group upgrade quickly turned into complete rifle program. The SPR originated as a stopgap measure, filling the void between the M4 carbine and the M24 bolt-action sniper rifle roles. The 9/11 attack, resulting in our constant engagement around the world, brought the SPR program quickly to fruition. The SPR became the weapon of choice when dealing with threats at ranges beyond the capability of the M4.

The movie “Lone Survivor”, in which Mark Wahlberg portrays U.S. Navy SEAL Marcus Luttrell, shows the main character using a Mk 12 rifle. The SPR/Mk 12 found favor with SOCOM forces for a multitude of reasons such as its high degree of accuracy, versatility, portability, increased firepower when compared to pure sniper rifles, optics package, suppressor compatibility, more ammunition carried per pound than 7.62 NATO, etc. The Marines eventually started using the SPR, as well, in a DMR role. Examples of military SPR use include by a spotter on a two-man sniper team or as the primary sniping weapon where larger caliber heavy bolt action sniper rifle is not practical, for instance, in a target rich environment where engagement range is between 300-700 yards. Imagine Iraqi urban environments where snipers would hole up in a house, blocks away, to provide cover for clearing troops. The SPR can place rapid precision fire on multiple targets out to 800 yards while still being able to cope with CQB, if required. This firepower capability is grounded in the SPR’s minimal recoil and smooth operation thanks to rifle length gas system coupled with 5.56mm ammunition.

Phased out of production in 2017 by the MK17 (SCAR-H) and MK110A1, the SPR is still used by SOCOM units hoarding the ones left in inventory. Navy SEAL armorers reportedly still produce Mk12s for its teams thanks to their access to discretionary funds. This is a strong supporting statement of the Mk12’s performance.

AMMUNITION SUPPORT

The SPR’s sub-MOA accuracy is an important part of its appeal. This is thanks to the 5.56mm load specifically developed for it by Black Hills Ammunition, the Mk 262 round. Like the SPR rifle, the Black Hills Mk 262 ammunition has been tweaked since its introduction. Updates include a cannelured 77-grain Sierra MatchKing bullet, low flash propellant blend, 5.56mm brass and other un-disclosed proprietary improvements. The Mk 262’s most important characteristic is repeatable accuracy. Black Hills indicates ammunition lot accuracy test consists of 10 groups of 10 shots at 300 yards. No lot ships unless it shoots sub-2-inch groups at 300 yards.

Interestingly, the Mk 262 has unexpected qualities beyond long range accuracy. Mk 262’s terminal performance soon had other SOCOM team members stuffing it into their magazines. Often liberating it from their snipers. How did the 77-grain Sierra MatchKing do this in M4 14.5-inch and Mk18 10.3-inch barrels? The MatchKing’s open tip hollow cavity puts the majority of weight towards the projectile’s rear so that it is more stable in-flight, increasing accuracy. However, when the bullet strikes soft tissue, the heavier base comes around and causes the bullet to tumble. The hollow nose cone breaks off and often the bullet fragments at the cannelure. This happens across a wide range of the velocity spectrum, which is why Mk 262 ammunition proved effective in SBRs in addition to the longer-barreled SPRs.

MODERN RENDITION

As is prone to happen with a rifle requested and proofed by the USSOCOM operators, as word got out about the SPR/Mk 12, civilians wanted it. The SPR was viewed as a multi-purpose weapon. SPR-type ARs can be found overlooking prairie dog towns, predator hunting, as well as in 3-Gun and PRS competitions. Various manufacturers have produced their versions of the SPR. These rifles span the gamut from exact clones to shadowing noteworthy characteristics such as 18-inch match barrel, upgraded trigger, free floated rail, and other accuracy maximizing features.

The SPR that recently caught my eye is the IWI Zion-15 Special Purpose Rifle (SPR). For me the SPR’s most salient features consist of accurate reliable firepower in an easily portable platform. The Zion-15 SPR delivers. The IWI SPR weighs only 7.6 pounds with 18-inch barrel. This is important as an SPR is required to be able to deal with CQB encounters with distances measured in feet while still offering precision fire capability out to 800+ yards.

The IWI SPR is manufactured and assembled at the IWI U.S. facility in Middletown, Pennsylvania. Conversation with IWI U.S. Vice President of Sales and Marketing Jeremy Gresham confirmed certain nuanced attention to detail features in the IWI SPR. For example, IWI makes their own barrels at the Pennsylvania facility with a special 18-inch 5R 1:8-twist, nitride-treated, chrome moly vanadium barrel for the IWI SPR. A collaboration with Timney Triggers finds an IWI-specified two-stage match flat trigger installed in the IWI SPR. The importance of a quality trigger cannot be overemphasized when trying to produce sub-MOA accuracy. A rifle length adjustable gas systems provides the IWI SPR with smooth operation. The adjustable gas block allows for easy adaptation to suppressor use. The IWI website does not mention this important IWI SPR feature. The adjustable gas block was a pleasant surprise when inspecting the rifle upon arrival considering suppressor use is almost standard procedure anymore along with historical precedent of military SPR best practices.

Other thoughtful IWI touches are the built-in full-length ARCA rail on the bottom of the 17-inch MLOK forend. A steel barrel nut is another accuracy enhancing upgrade. A quality barrel nut is a vital component, providing a solid connection and proper alignment between barrel and upper receiver which ultimately contributes to consistent accuracy. B5 Systems adjustable Enhanced SOPMOD buttstock and Type 23 P-Grip finishes off IWI SPR furniture. The B5 pistol grip has a steeper vertical angle than standard pistol grips and an extended tang to improve ergonomics and ensure proper trigger finger index.

SUPPORT COMPONENTS

The versatility of the original SPR platform is indicated by the different optics end users equipped it with, such as 3.5-10x, 2.5-8x, and 3-9x optics. I considered mounting a Trijicon VCOG 1-8x but went with the higher magnification Trijicon Ten Mile 3-18×44. I really wanted to accentuate the precision component of the rifle. I am glad I did once the first range session showed what the IWI SPR could do in the accuracy department. An offset mount featuring a red dot will quell any concerns of the Trijicon Ten Mile 3-18×44, if the IWI SPR is pressed into a close-range affair. The offset optic mount allows a quick rotation of the rifle in the shoulder pocket to access the red dot optic with minimal effort or disturbance of handling.

The SPR was intended to be used primarily suppressed. This was the best way to conceal the origination point of shots taken with it. A lightweight Rugged Suppressors Alaskan360 was an easy choice to mount on the IWI SPR. A Rugged Suppressors 2-port 5.56mm muzzle brake replaced the birdcage flash hider that arrived with the IWI SPR. The Rugged Suppressors brake makes for easy removal and attachment of the Alaskan360 suppressor.

Ammunition tested with the IWI SPR was a combination of Black Hills Ammunition loads—the Mk 262 and civilian version 77-grain OTM, multiple Hornady loads—75-grain BTHP and 55-grain VMAX, SIG Sauer 77-grain OTM and Federal 62-grain FMJ-BT. The IWI SPR rifle kept all loads tested at 1.25-inches or better at 100 yards. Mostly better. The Black Hills loads—Mk 262 and 77grain OTM—SIG Sauer 77-grain and Hornady 75-grain and 55-grain loads produced sub-MOA groups. Some of these groups were in the ½-inch range. Impressive performance. Groups at 200 and 300 yards confirmed 100-yard findings. This is a compliment to IWI SPR’s barrel and trigger, Trijicon optic, and ammunition. At times it felt like the I was letting the IWI SPR down. After firmly establishing what it could do, when a group opens up to an inch or more, you know who the weak link is. The IWI SPR produces accuracy that fully supports the original SPR intended role. Velocity figures ranged from 2700 to 3000 feet per second over a Caldwell chronograph.

FIELD EVALUATION

Real proficiency begins with realistic training scenarios. Range evaluation at Echo Valley Training Center (EVTC) consisted of taking advantage of the recently added 3-gun rifle range with multiple plates set up at four different distances stretching out past 400 yards down a ravine following natural contours. Multiple sizes and shapes of steel plates occupy each station. A Burris Signature HD Spotting Scope 20-60x85mm proved handy for spotting purposes.

The IWI SPR/Trijicon/Rugged Suppressors combo was used in the prone, sitting, kneeling, standing positions, or shooting from a BOG Infinite Deathgrip tripod. The IWI SPR’s ARCA railed forend proved handy for securing into the BOG tripod. The IWI SPR proved to “hang” well from less well supported positions and was very manageable in getting into and out of shooting positions. Another twist is to have a companion pick the target and shooting position for the shooter to engage as quickly as possible.

PERFORMANCE

Clay pigeons were sniped with regularity at 475 yards from the supported prone position and off the BOG tripod. Felt recoil was minimal (as expected) with a suppressed 5.56mm. With the Rugged Suppressors Alaskan360 attached it was no problem to spot a miss and have another round on the way from the IWI SPR before the spotter could even relay the information.

TWO CENTS

While I appreciated IWI’s choice of a B5 stock and pistol grip, some end users may consider a fixed, precision-oriented buttstock. I will stay with the B5 as I favor the ability to reduce stock length. A gas buster-type charging handle is recommended if firing multiple rounds from one position when suppressed. An extended charging handle is another recommendation, especially with an optic mounted for easier manual operation. Lastly, ambidextrous controls would also have been a nice touch.

IWI indicated that “user subjective” items like charging handle, safety, and muzzle device was left as mil-spec standard so that the end user could build from there. Along these lines I have no issue with bird cage flash hider. With suppressors becoming so popular, its best to allow the end user to choose their muzzle device or just direct thread it onto the barrel. Frankly, IWI’s decisions in this regard make sense when the shockingly low MSRP of $1299 for the IWI SPR is revealed. $1299 for the kind of accuracy exhibited along with an adjustable gas block, ARCA rail forend, and B5 furniture is a great value.

MULTI-PURPOSE

The inherent adaptability of the AR platform is one its greatest attributes. The ability to send bullets downrange accurately, whether for competition, target shooting, military, law enforcement, or personal defense, ensures its place in the rifle marketplace. There is minimal difference between AR labels such as Recon, Recce, SPR, DMR, Mk12, Competition, etc. These ARs are required to be equally at home with close-range hose downs and long-range precision shooting. The IWI SPR rifle is an excellent example of this. The IWI SPR’s handling with superior accuracy is hard to deny. It’s smooth, easy, and accurate. And, best of all, it’s a great value.

SPECIFICATIONS

“The Israel Weapon Industries US Galil ACE Pistol with stabilizing brace is now steadily arriving on dealer’s shelves.” This was the line written back in 2015 — Wait…what?

Then, as now, IWI US had to overcome various manufacturing and BATF compliance issues to get this highly anticipated product into the hands of American customers. You’ll notice a theme here of IWI having to adapt to and overcome numerous federal regulations and executive actions as they brought the Galil ACE to market here. Now, in 2024, IWI had to wait out the onerous fiat from BATF about the legality of braced pistols, all the while dealing with the scarcity of 5.45x39mm ammunition after the U.S. government’s August 2021 sanctioning of Russian ammunition imports in response to their invasion of Ukraine.

In November 2023, a federal judge issued a ruling preventing the Bureau of Alcohol, Tobacco, Firearms and Explosives (BATF) from enforcing its 2021R-08F rule regulating pistols equipped with stabilizing devices. BATF had announced this arbitrary rule in the beginning of 2023, throwing the gun industry (and public) into a tizzy. Braced pistols are an extremely popular product with tens of millions already in circulation. This article is NOT about regulation, however, the way the government has handled the entire issue has been a joke and I’m glad to talk about something else. The something else being the Galil ACE GEN II Pistol chambered in 5.45×39 with 13-inch barrel.

REBORN

In 2015, IWI US decided to revive the Galil in the enhanced Galil ACE form for the U.S. civilian market and for certain foreign client contracts. The original Israeli Galil was choked out of the U.S. market in the early 1990s due to changes in federal importation regulations. Notice a recurring theme here? The Galil ACE is not merely a copy of the 1960s design, though. IWI took full advantage of the passage of time to improve and update the original Yisrael Galil and Yaacov Lior 1960s design. The pistol brace version reviewed here was definitely not contemplated by the two original designers.

The Galil was inspired by the Finnish Valmet Rk 62. The Valmet Rk 62 is itself an improved AK derivative. The Rk 62 sought to maintain the AK’s legendary reliability while improving upon its accuracy. This was accomplished with the use of quality barrel, extended iron sight radius, higher quality manufacturing techniques, tweaks to the gas tube, and long stroke gas piston operation. Israel’s Galil followed the Valmet Rk 62’s path after the IDF found the FAL wanting in terms of size, recoil, and, more importantly, reliability. The Galil in 5.56mm was officially adopted by the IDF in 1972.

The Galil ACE line is assembled from a combination of Israeli and U.S. manufactured components at their Harrisburg, PA facility. The IWI US Galil ACE (Gen I) sought improvement over the original Galil in a number of ways. Galil reliability and performance has never been doubted, however its near ten-pound weight drew criticism from troops, especially when compared to the six-pound M4. The Galil ACE makes use of a polymer lower for the magazine well, trigger guard, and pistol grip. The upper receiver (containing the action and hinged folding stock trunnion) is milled from ordnance steel. The railed forend on the Galil ACE Gen I was also derived from high strength polymer. Besides shaving weight, the Galil ACE has its reciprocating charging handle moved to the left side of the steel receiver for easier off hand manipulation. A spring-loaded gate on the left side minimizes the chance of debris entering through the charging handle pathway. The original Galil had a distinctive vertically upturned handle on the right side.

IWI US accentuated previous Galil design by securing the Galil ACE’s railed top cover tightly with an oversized release button at the end of the recoil spring. This ensures sights stays zeroed, especially red-dot or magnified optics. The top cover exhibits no wiggle. In fact, removing and reinstalling takes some effort, but is worth it considering the advantage gained. Following this theme, the Galil’s gas tube is dovetailed into the receiver’s front block. This limits any movement of the gas block that can influence barrel vibration and, thus, degrade accuracy. A recoil buffer is also present at the rear of the recoil spring. This serves multiple roles: it cushions the impact of recoiling parts, eases wear on the rear trunnion, and tames vibrations while increasing accuracy potential. All of these details related to the top cover and the gas tube differ from the original AK.

The Galil ACE was further improved upon with the Galil ACE GEN II in 2021. The GEN II features a full length, two-piece Picatinny top rail, free-float metal alloy M-LOK forend, improved trigger, more ergonomic safety, and a side-folding adjustable stock arrangement that’s M4-tube compatible. GEN II rifles ship with a Magpul CTR stock and riser. Braced pistols ship with SB Tactical’s SBA-3 arm brace. (EDITORS NOTE: According to IWI US, As of March 2024, all Galil ACE Gen II pistols will not ship with a stabilizing brace pictured. They will ship with a flat back plate.) And the GEN II rifles and braced pistols are available in 5.56mm, 7.62x39mm, and 5.45x39mm—the object of our attention here.

The Galil ACE GEN II braced pistol we tested features a 13-inch 1:7.5” RH twist chrome-lined hammer-forged barrel with removal A2 style flash hider. Overall length is 32 inches open and 24 inches with the brace folded. Weight is just under 8 pounds. An 8.3-inch barreled pistol also available, as is a 16-inch rifle version. A Magpul 30-rd AK74 MOE magazine arrives with the pistol. IWI US literature makes mention that a U.S.-made magazine was used for 922R compliance purposes—another onerous government regulation. A centrally located magazine release reinforces ambidextrous functionality. Magazines do not drop free and there is no last round hold-open provision or bolt open device found with the Galil ACE a ’la AK.

The Galil ACE comes equipped with the same trigger type used in the Galil sniper rifle. This is a nice upgrade offering a 5-pound pull that begins with a slight take up. The Galil ACE pistol emerges from the box remediating known AK shortcomings in terms of mounting optics over the receiver. With the IWI Galil ACE you possibly have the finest AK variant currently in production.

I decided to take full advantage of the Galil ACE pistol’s flattop upper by mounting a Meprolight TRU-VISION red dot sight in front of a Meprolight MMX3 slide flip magnifier. Independence from set eye relief requirements is a major advantage of red dot sights. This is born out when working in tight confines or finding oneself in awkward firing positions when maximizing available cover. Keep both eyes open and pull the trigger when you see the red dot on the target. The adjustable intensity of the TRU-VISION red dot sight allows you to tune the 2MOA dot reticle as needed either in low light or bright conditions. A pistol like the Galil ACE that is created from an assault rifle by removing the rear stock is a perfect candidate for the red dot. The ability to boost magnification to 3x with the MMX3 extends the platform’s effective range.

CHAMBERING

5.45x39mm (5.45mm) military surplus 7N6 ammunition was banned in early 2014 by executive fiat. (Notice a recurring theme?) Up to this point, the availability of cheap, plentiful 5.45 surplus ammunition had 5.45 chambered AKs increasing in popularity. While we will avoid arguing over the validity of declaring the 7N6 5.45 surplus “armor piercing”, the ban did take the steam out of sales of 5.45-chambered AKs. However, IWI US decided to make a limited run of 5.45×39 chambered Galil ACE rifles and pistols few years back, anyway. These sold out so quickly that the company decided to continue with the 5.45 chambering when the Galil ACE GEN II models were introduced.

The 52.9-grain 7N6 “poison pill” bullet first gained notoriety in the Soviet Afghan War. The Soviets designed the 7N6 5.45×39 cartridge with an air space inside the jacket at the bullet’s tip. The air space serves to shift the bullet’s center of mass toward the rear. This increases likelihood of yaw (tumbling) when striking soft targets—flesh. In addition, the lead core behind this air space shifts forward upon impact, producing a peculiar curvature of the bullet’s path in the last half of its travel through tissue. One downside typical to most surplus ammunition is that it uses corrosive primers. While “spam” cans of 7N6 5.45 can still be found, don’t expect to find them for just a few cent a round anymore—they are more like .80-90 cents a round these days. This is what happens when government makes rules in the marketplace.

5.45 ammunition is available from both Russian and non-Russian manufactures. I’ll admit to having acquired an adequate supply of 5.45 ammo over the years. Multiple 5.45×39 loads were tested with the Galil ACE 5.45 such as Wolf, Tula, Silver Bear in 60-grain and 70-grain varieties. We also ran some Century International Red Army Standard 5.45×39.

Two other 5.45 loadings of interest were also fired with the Galil ACE 5.45. Hornady’s 60-grain V-Max and Dynamit Nobel 59-grain HP. The Hornady 5.45×39 load is a godsend for 5.45 owners looking for a quality, U.S.-made ammunition choice for their rifles. By good fortune I discovered the German Dynamit Nobel 59-grain 5.45×39 several years ago and picked up a couple of cases. The Hornady V-Max loads delivered accuracy in the 1.25-inch range at 50 yards with the Dynamit Nobel producing 1.5-inch groups at the same sdistance. The other ammunition brands produced 50-yard groups of 2-inches and under. Accuracy testing was done with the Meprolight TRU-VISION red dot and with the 3x MMX3 magnifier in place.

WORTH IT

Several hundred rounds were fired through the Galil ACE GEN II pistol for this article. After initial inspection and light lubrication, no cleaning was performed. No issues were encountered in terms of reliability. I paid special attention to the gun’s ability to hold zero by removing and reinstalling the top cover numerous times between evaluation scenarios. I also had some concern about heat transfer to the railed polymer forend. This proved a non-issue thanks to the effective heat shields and spacing between barrel/gas block and forend. In fact, even after multiple rapid fire magazine dumps, I could grip the forend with a non-gloved hand.

PERFORMANCE

Range tests consisted of moving around barricades and simulated cover while engaging an assortment of paper and steel targets, including automobiles located at Echo Valley Training Center. One thing I liked immediately was the ACE’s ambidextrous safety lever. The right-side safety lever has been reduced in size since it’s no longer required to act as dust cover. The right-side safety lever is accessed with the right index finger or by removing your hand from the pistol grip and using multiple fingers. On the left side, just above the pistol grip, there is another safety lever, meant to be operated by the shooter’s thumb. I favored this method of use in terms of ergonomics.

The fact that the Galil ACE pistol is classified legally as a handgun (again—for now) offers users who have a concealed carry license a certain amount of flexibility compared to a true rifle or NFA classified weapon. If considering the Galil ACE pistol for a serious defense or a tactical role, it would be best to look at it as a personal defense weapon (PDW) instead of a rifle. The Galil ACE pistol is definitely more potent and offers longer effective range than a traditional pistol; especially if the shooter is trained to use it effectively and appreciate its nuances.

Many will argue that there is no defensive or tactical value in such a non-traditional pistol as the braced Galil ACE pistol; just use a full-size rifle or typical handgun, they’ll say. However, some will be lured to the Galil ACE GEN II pistol by its ability to offer handgun status with rifle performance. Compared to a standard pistol, the folding ACE’s ability to be transported more discretely than a full-size rifle gives out-and-about defenders a rifle-caliber tool without the rifle-caliber size, should they need to deal with unexpected threats.

SPECIFICATIONS

The current order is for the 5.56x45mm caliber Micro-TAVOR with a 380mm and 419mm – barrel length. The firearm is equipped with M-1913 picatinny rails enabling the mounting of essential accessories such as sights, lights, and visual and IR illuminators necessary for modern warfare.

This order joins previous IWI contracts for the IDF, such as the Negev LMG (light machine gun) and the 40mm grenade launcher that can be mounted on to the Micro-TAVOR rifle.

The Micro-TAVOR rifle has been in IDF active duty and reserves service since 2006. Its bullpup configuration platform creates an ergonomic and short firearm with a long barrel, giving it superior ballistics compared to other platforms.

IWI is a member of the SK Group (founded by Mr. Samy Katsav), and a global leader in the production of combat-proven small arms for military, police, law enforcement agencies, and governmental entities around the world. Ronen Hamudot, Executive VP Marketing and Sales of the SK Group said: “We are proud of the IDF’s decision to, once again, choose the small arms advanced solutions manufactured by IWI. This is a fruitful cooperation between the company and the IDF that has been in place for many years, and which reflects the Ministry of Defense’s confidence in SK Group’s solutions in the light weapons sector. The Micro- TAVOR advanced design and technology was developed in collaboration with the elite units of Israel Defense Forces (IDF). During its development every technological and ergonomic aspect was taken into consideration.  We are proud to say that today it is the standard IDF assault rifle”.

About Micro-TAVOR (X95)

The (X95) Micro-TAVOR is an innovative weapon system that can be converted in minutes to 4 calibers 5.56x45mm, 9x19mm 5.45x39mm and 300 BLK. This leap in innovation makes it possible to use the same weapon platform for highly diverse scenarios. Its compatibility with different ammunition calibers also saves training time and spare parts.

Designed to meet extreme demands in urban and open terrain combat environments
The X95 is manufactured exclusively for Military, Police, Special Forces and Law Enforcement agencies to deal with modern warfare challenges. It is manufactured from high strength impact resistant polymer combined with high grade metal and alloys providing a robust and reliable yet remarkably light weapon.

Exceptionally reliable even in the harshest conditions, the X95 is combat proven by military and police entities around the world. It complies with stringent NATO standards for small arms, including environmental standards.

GEMTECH 

.22LR 42gr Match Subsonic 

Optimized for use with a suppressor, Gemtech .22 Long Rifle Ammunition is the perfect choice for the peaceful plinker. With a premium heavy 42-grain lubed lead bullet and clean burning powder, Gemtech .22LR ammunition delivers consistent 1020 fps subsonic velocities, hard hitting performance and match grade accuracy. Sold in 500-round bricks or 5,000-round cases. 

MSRP: $7.00 per 50rd box • Where to buy: Gemtech.com and Gemtech dealers nationwide. 

VIBRA-TITE

Hot-Lock Threadlocker 

Vibra-Tite Hot-Lock is a medium–high strength, ceramic-based thread locker which exhibits unparalleled temperature resistance up to 2000°F and excellent performance across many different substrate finishes. 

Hot-Lock Extreme Temp Threadlocker will lock threaded barrel devices in place at temperatures where standard thread lockers would disintegrate. In addition to handling extreme heat, Hot-Lock resists vibration to keep those parts locked in place, round after round. 

Whether you compete or just plink, keep your firearm in good working order. 

MSRP: $15.00 • Where to buy: amazon.com 

FEDERAL 

350 Legend 

Blow the doors off straight walls. The new 350 Legend offers higher velocities than any straight-wall deer cartridge, with significantly less recoil than 450 Bushmaster in a compact, maneuverable platform. It’s an ideal fit for both MSRs and bolt-action rifles, penetrates deep and delivers ample energy to take down any buck. Federal has harnessed all the 350 Legend has to offer with three new loads in our Fusion, Power-Shok and Non-Typical lines. All get peak accuracy and terminal performance from the round thanks to consistent bullet designs that expand reliably at 350 Legend velocities. 

MSRP: Starting at $26.95 • Where to buy: federalpremium.com

SPEER 

Gold Dot G2 

The next generation of protection has arrived. Previously only offered to law enforcement, Speer Gold Dot G2 offers the ultimate performance for self-defense thanks to an exclusive nose design. Instead of a large hollow-point cavity, Gold Dot G2 has a shallow dish filled with a high-performance elastomer. On impact, the material is forced into engineered internal fissures to start the expansion process. The result is extremely uniform expansion, better separation of the petals and more consistent penetration across barrier types through full-size handguns. 

MSRP: Starting at $28.95 • Where to buy: speer-ammo.com

CCI 

Clean-22 Pink 

Keep your rimfire running cleaner and help fight breast cancer with new CCI Clean-22 Pink. A portion of the proceeds from every box sold goes directly to the effort to find a cure. Like other Clean-22 loads, its exclusive polymer bullet coating greatly reduces copper and lead fouling in the barrel—without leaving a residue. It also cuts lead buildup in suppressors 60 to 80 percent and comes in a 400-round bulk bottle that’s perfect for long days at the range. With dependable CCI priming and consistent propellant, Clean-22 Pink provides flawless cycling through semiautomatics and all .22 LR firearms. 

MSRP: $29.95 • Where to buy: cci-ammunition.com 

CHIPOTLE PUBLISHING, LLC 

1-Year Subscription to Small Arms Review 

The ultimate Small Arms Resource on industry practices, historical archives, new products, legal issues and breaking news. The 10-Issue Subscription comes with free online access to articles and content 

MSRP: 39.95 • Where to buy: smallarmsreview.com 

ALIEN GEAR 

Cloak 3.5 IWB Holster 

The sophistication of Alien Gear’s enhanced Cloak 3.5 IWB Holster can’t be comprehended until you experience the soft backing and perfect retention for yourself. It’s an experience not to be missed. Two adjustable clips securely attach to your belt, while a CoolVent Neoprene backing comfortably and flexibly conforms to your body. A custom-molded shell securely retains the firearm while properly protecting your trigger guard. You’ll want to treat your firearm to this masterful creation. 

MSRP: Starting at $49.88 • Where to buy: aliengearholsters.com 

CHIPOTLE PUBLISHING, LLC 

The U.S. M14 Rifle: The Last Steel Warrior (2nd Edition) 

Now in hardback format, the second edition of this classic work is now expanded to 430 pages and includes new information from recently discovered government documents and numerous color photographs. What’s included: Prototypes and production M14 rifles and their commercial semiautomatic counterparts, contractors, subcontractors, experimental models, match and sniper rifles, modern M14 rifles, training, magazines, parts and accessories, ammunition, maintenance and more! 

MSRP: $69.95  Where to buy: smallarmsreview.com

STREAMLIGHT, INC. 

Streamlight ProTac 90 

At just 3.75 inches, the ultra-compact ProTac 90 is a super-bright, right-angle tactical light that delivers up to 300 lumens and a 1.5-hour run time on high. The light features a 90-degree head and a multi-function clip designed for hands-free options, which fits MOLLE and other gear. The light’s proprietary TEN-TAP® programming allows for three modes: high/ strobe/low; high only; or low/high. The ProTac 90 features convenient multi-fuel technology with three battery options: CR123A lithium battery, AA alkaline or AA lithium battery. 

MSRP: $68.00 Where to buy: streamlight.com 

DTLGEAR 

Bleeding Control Kit 

Our Bleeding Control Kit (IFAK) is a much needed item for your range bag, car, ATV, or to have anytime you’re in the field. Accidents can happen anywhere, and a person can bleed out and die within 2 minutes. The kit includes a SWAT-T or SOFTT-W tourniquet, chest seals, CPR mask and more needed to save a life. 

MSRP: $79.95 • Where to buy: dtlgear.com 

HACKETT EQUIPMENT 

Little Bertha 2 Pistol Range Backpack 

Don’t let the name fool you … The Little Bertha 2 Pistol Range Backpack is not little, and it is not just for the range. This is your everyday gun bag for the range, work and travel. It has two pistol holsters, spots for eight magazines, eight ammo box pouches and compartments for the rest of your gear. It comes in Coyote Tan and makes a perfect front seat companion. The backpack comes with a Lifetime Warranty. 

MSRP: $79.99 • Where to buy: hackettequipment.com 

DOUBLESTAR 

Ahab Fixed Blade Knife 

This everyday carry knife was designed to be discrete and compact without sacrificing relevance. Elements like the oversized ring and precision thumb break provide the best amount of retention for quick deployment. The Ahab’s strong, lightweight construction makes it the perfect duty belt utility that will be there when you need it most. The Ahab is made from 1084 Carbon Steel and includes a kydex sheath and Safe-Lock belt clip. 

MSRP: $84.99 • Where to buy: doublestarusa.com 

BIGFOOT GUN BELTS 

Suspenders 

Bigfoot Gun Belts Suspenders are beefy, brawny but classy. Straps of rich English Bridle leather, in black, brown or tan, with elastic back straps create the perfect fit. Large and small suspender clips are included, but additional clip styles are also available, including belt hooks, trigger snaps and button tab attachments so you can customize your experience. Bigfoot Suspenders are built strong but make an elegant appearance. Business or outdoor styles are available! 

MSRP: Starting at $85.88 • Where to buy: gunbelts.com 

FEDERAL 

Syntech Bulk Bucket 

There’s never been a better way to have an epic day at the range. All-new Syntech Bulk Buckets boast 250 to 500 rounds packed in rugged plastic buckets that stack, store and transport easily. The one-of-a-kind TSJ® projectile uses a polymer jacket to eliminate metal fouling and drastically reduce damaging barrel heat and friction. The bullet style also minimizes splash-back on steel targets. Its exclusive Catalyst™ primer provides hot, reliable ignition without the use of lead. 

MSRP: Starting at $96.95 • Where to buy: federalpremium.com 

ALIEN GEAR 

ShapeShift Core Carry Pack 

You have what it takes to become a master shapeshifter, and we have what you need to experience concealed carry perfection. Introducing the ShapeShift Core Carry Pack. This transformative system equips you with everything you need to seamlessly transition between four distinct concealed carry positions. From IWB to OWB to appendix carry, you’ll be efficiently and effortlessly carrying how you want, when you want. We invite you to become a master shapeshifter today. 

MSRP: Starting at $99.88 • Where to buy: aliengearholsters.com 

DTLGEAR 

First Aid Kit 

Our high-quality First Aid Kits are designed by and for shooters / sportsmen. It includes a complete IFAK kit for major situations including SWAT-T or SOFTT-W tourniquet, chest seals and CPR mask. It also includes items needed for minor emergencies including adhesive bandages, eyewash, compression bandages, gauze, tape, splinter removal tools and more. Weighs just 1 pound, 14 ounces. 

MSRP: $99.95 • Where to buy: dtlgear.com 

DOUBLESTAR 

Stronghold Pistol Grip with G10 Panels 

DoubleStar has taken pistol grips to the next level by combining durability and customization in one awesome package. Introducing the Stronghold Pistol Grip. This innovative design utilizes a lightweight, anodized aluminum frame and customizable textured G10 grip panels. The palm swell provides a secure but comfortable surface for the shooter’s hand even in gloves. The high-quality U.S.-made G10 panels round out the package with rugged style. Available in Black, Red, FDE and Gray. 

MSRP $99.99 • Where to buy: doublestarusa.com 

CONCEALED CARRIE 

Compacts 

In direct response to their valued customers, Concealed Carrie offers fashionable compacts and matching cross body chains, the perfect accessory to your handgun. Stay organized and protected with Concealed Carrie’s Compacts. The double-sided design acts as a wallet on one side while keeping your firearm separate and secure on the other. The zippered main compartment is full of dividers for currency, credit cards and personal items. The adjacent double-zippered Hook-and- Loop-lined firearm compartment safely stores your handgun. 

MSRP: Starting at $109.00 (Chain sold separately for $15.) Where to buy: concealedcarrie.com 

SPYDERCO 

Endela

Sized to literally split the difference between Spyderco’s iconic Endura 4 and Delica 4 Lightweights, the Endela offers all the highly refined features of each in the perfect “in-between” format. Its full-flat-ground blade is crafted from VG-10 stainless steel and sports a fully accessible Trademark Round Hole for ambidextrous one-hand opening. Available in either PlainEdge or SpyderEdge, the blade is supported by a sturdy back lock, skeletonized stainless steel liners and injection-molded, fiberglass-reinforced-nylon (FRN) scales. 

MSRP: $123.00 • Where to buy: spyderco.com 

GEMTECH 

22 QDA 

Add quick-detach capability to all ½-28 threaded .22LR and .22Mag rimfire suppressors. The Gemtech 22 QDA (Quick Detach Adapter) system includes a four-lug muzzle device, threaded ½-28 for use on all standard rimfire threaded barrels, a quick-detach mount that threads into the rear of the suppressor and an installation wrench. Swap rimfire suppressors between host firearms in seconds with this fast and secure mounting system. 

MSRP: $130.00 • Where to buy: Gemtech.com and Gemtech dealers nationwide 

TACTICA 

Concealed Carry Sweater 

Your concealed carry wardrobe deserves a revival, especially if your clothes get in the way of your draw. Our Concealed Carry Sweater understands your pain and was expertly designed to solve your concealed carry problems. Made of 100% Merino Wool, this ultra-soft sweater not only keeps you warm, but deeply conceals your firearm. With two ambidextrous faux draw-through pockets, you’ll be able to draw from your corset or belly band holster in seconds. 

MSRP: Starting at $149.99 Where to buy: tacticafashion.com 

KELTEC 

KelTec P17 .22LR 

At less than 14-ounces fully loaded, the KelTec P17 .22LR is easy to handle for almost anyone. Add its threaded barrel, Picatinny-style accessory rail, ambidextrous controls, three 16-round magazines, and this package offers a value far greater than its MSRP. Thanks to its excellent trigger, fiber optic front sight and adjustable rear sight this innovative, new KelTec pistol not only burns bullseyes, but it builds confidence on a budget. 

MSRP: $199.00 • Where to buy: Local dealer 

MANTIS 

Mantis X10 

The Mantis X10 is the next evolution of the original MantisX. The X10 features a completely redesigned hardware set and powerful algorithms that give users real-time feedback on their shooting performance. The X10 features a RecoilMeter, holster draw analysis and other dynamic shooting analyses and feedback. 

MSRP: $250.00 • Where to buy: mantisx.com

SPARTAN BLADES 

Spartan-Harsey Dagger 

Designed by prolific knife designer William W. Harsey, Jr., the Spartan-Harsey Dagger was designed as a real-world combat dagger. Based on Mr. Harsey’s extensive experience working with Special Operations Forces, he has developed what many believe to be the epitome of what a combat dagger should be. Its timeless design is matched only by the use of premium U.S. materials which include: S35VN, double-deep cryogenic treatment, pressure tempering and full tang construction making for a knife that will most assuredly become an American classic. 

MSRP: Starting at $390.00 • Where to buy: spartanbladesusa.com 

MEPROLIGHT 

MEPRO Micro RDS and Picatinny QD Rail 

The MEPRO MicroRDS, is a small, rugged, energy-efficient, electro-optical red dot sight designed for handguns, shotguns and rifles with a large display window and a clearly defined red dot for fast target acquisition with both eyes open. The MicroRDS Kit includes a patent-pending dovetail adapter with a quick detach mechanism that allows mounting and dismounting the MicroRDS on the gun with a click of a finger. The adapter includes high-quality Meprolight Night Sights that allow accurate and fast shooting under any lighting conditions when the MicroRDS Optic is removed. Meprolight just introduced their MicroRDS Optics- Ready-Guns QD rail plate for GLOCK, Smith & Wesson M&P pistols and the new IWI MASADA pistol. 

MSRP: $440.00 • Where to buy: meprolight.com 

ADVANCED ARMAMENT CORPORATION 

Jaeger 30 

A high-performance Suppressor built with AAC’s industry-leading efficiency, which allows us to deliver what every hunter and the game they pursue deserve: superior suppression, great accuracy and rifle control, all at an affordable cost. 

MSRP: $449.00 Where to buy: advanced-armament.com 

STREAMLIGHT, INC. 

TLR- 8 G 

Featuring an “eye-safe” green aiming laser visible in daylight, the TLR-8 G is a compact rail-mounted tactical light designed for maximum visibility and long-range targeting. The light features three modes, including Laser-only to keep the light on target; LED-only for 500 lumens of bright, focused light; and Dual Mode, which combines the laser and LED. With a low-profile ambidextrous switch to protect hands from gun muzzles, the TLR-8 G is easily mounted to a wide range of weapons. 

MSRP: $450.00 • Where to buy: streamlight.com

IWI 

MASADA 

The MASADA takes user preferences to a new level, with each feature carefully selected based on input from military, law enforcement and gun enthusiast alike. The MASADA was engineered to endure all elements while maintaining IWI legendary attention to detail and reliability. 

MSRP: $480.00 • Where to buy: iwi.us 

CZ-USA 

457 Lux 

Designed in the European style, the 457 Lux has a hogback stock fashioned from Turkish walnut. With a cheekpiece and comb ideal for use with its crisp iron sights, this 457 is one classy plinker. Like all 457s, it has an 11mm dovetail for mounting optics and can be quickly and easily swapped to a different chambering with the addition of a second barrel set to include .22WMR and .17HMR (sold in our webstore). One 5-round magazine is included. 

MSRP: $499.00–$522.00 • Where to buy: cz-usa.com 

SPYDERCO 

Respect 

Designed by Spyderco founder Sal Glesser, the Respect represents his personal interpretation of the classic American Bowie Knife. Its dramatic clip-point blade is made from 300-inch-thick CPM 154 stainless steel and has a broad profile for exceptional edge geometry. The two-piece handle is machined from solid G-10 slabs and seamlessly attached to the concealed tang with oversized Torx screws. A knife truly worthy of its name, the Respect comes complete with a handcrafted leather sheath. 

MSRP: $560.00 • Where to buy: spyderco.com 

SMITH & WESSON 

M&P9 M2.0 4” Compact Flat Dark Earth 

The award-winning Smith & Wesson M&P 9 M2.0 Compact 4-inch Pistol is now available in the desirable Flat Dark Earth (FDE) color. The M&P 9 M2.0 Compact pistol is purpose-built for personal and professional use and features a Cerakote FDE slide, polymer FDE frame and the enhanced M2.0 feature set. Available with or without an ambidextrous thumb safety, the M&P9 M2.0 Compact 4-inch pistol comes standard with a white-dot front sight and a white two-dot rear sight, a capacity of 15+1 rounds and ships with two magazines, including two magazine extender sleeves for use with full-size magazines. 

MSRP: $569.00 • Where to buy: smith-wesson.com 

MEPROLIGHT 

MEPRO Foresight 

Meprolight introduces the first augmented reality (AR) weapon sight that uses real-time data or is used in conjunction with the MEPRO Foresight Mobile App (Android and IOS Bluetooth interface). It has 5 preset reticles, digital zeroing, a built-in compass, leveler and real-time projected data right on the transparent optical lens to keep the user informed at all times. The Foresight also features a built-in sensor for automatic brightness adjustment and a rechargeable battery using a USB. The mobile app provides for constant firmware updates and additional features including storing profiles and the ability to load a preset zeroing profile from the app. The large viewing window allows the user to keep both eyes open for increased situational awareness. 

MSRP: $714.00 • Where to buy: meprolight.com 

TRIJICON 

SRO 

The Trijicon SRO (Specialized Reflex Optic) is specifically designed for pistol use. The wide field of view and clean, crisp dot makes it easy for users to find and track the dot in both target and competitive shooting applications. Every SRO features both manual and automatic LED brightness modes. Additionally, a top-loading CR2032 battery provides a 3-year battery life (at setting 4 of 8). These features make the SRO a great choice in any application.

MSRP: $749.00 • Where to buy: trijicon.com 

MARLIN FIREARMS 

336/1895 Marlin Dark Series Rifles 

The speed and accuracy of Marlin lever actions, blacked-out and tricked out for the modern hunter. Our new Dark Series rifles feature a stealthy-tough black matte parkerized finish and a black-webbed hardwood stock, with a host of performance enhancements, including a threaded barrel, big-loop lever and XS Lever Rail with ghost-ring peep that also accommodates a wide variety of optics. 

MSRP: $949.00 • Where to buy: marlinfirearms.com 

REMINGTON ARMS COMPANY 

V3 Tactical Shotguns 

New for 2019 the V3 tactical line of shotguns are designed to offer a new generation of home defense shotguns to the market. Utilizing the patented Versaport gas system and the V3 platform design we are able to offer lightweight, soft shooting and utter reliability. All tactical models feature the enhanced ergonomic features of our pro series field guns and make this the ultimate home defense shotgun for the 21st century. 

MSRP: $1,095.00 • Where to buy: remington.com

WINDHAM WEAPONRY 

20-inch A1 Government Rifle 

Windham Weaponry’s new 20-inch A1 Government has the original A1 look and feel but is built to shoot with modern conveniences. The A1 upper includes a brass deflector and teardrop forward assist. The rifle-length handguard has an A1 delta ring. The 20-inch barrel with a 1-in-7 twist includes an A1 flash suppressor. The A2 stock includes a trapdoor storage compartment. Every rifle comes with Windham Weaponry’s transferable lifetime warranty. 

MSRP: $1,160.00 • Where to buy: Through your local dealer 

BLACK RAIN ORDNANCE 

Patriot-America Rifle 

Black Rain Ordnance has made a promise to make your firearm exactly that, your firearm. With the addition of the Spec + Series, you have over 100 different build configurations and 21 different finish options to choose from. If you are looking to add something special to your arsenal, without breaking the bank, the all new Black Rain Ordnance Spec + Series would be a good choice for you.

MSRP: $1,199.00 • Where to buy: blackrainordnance.com 

WINDHAM WEAPONRY 

.450 Thumper Pistol 

Windham Weaponry’s .450 Thumper pistol has become widely popular for people looking for a firearm to combat feral hogs. The pistol is chambered for the .450 Bushmaster round. It includes a 9-inch medium profile barrel that is capped with the proprietary Nor’easter muzzle brake and covered by the Windham Weaponry 7-inch, free-float, railed handguard. It is fitted with the adjustable SB Tactical pistol arm brace. Every firearm comes with Windham Weaponry’s transferable lifetime warranty. 

MSRP: $1,254.00 Where to buy: Through your local dealer 

BLACK RAIN ORDNANCE 

Ion 9 

The Ion 9 is a pistol caliber carbine which is fed from Glock-style magazines and operates on a complete billet platform utilizing a patented side-charging, non-reciprocating upper that is mated to a dedicated billet lower with a flared magazine well for quick reloading. With various build options within the Ion 9 series, you are sure to find the best subcompact pistol caliber firearm to fit your needs. 

MSRP: $1,259.00 • Where to buy: blackrainordnance.com 

CZ-USA 

Dan Wesson Vigil Series 

A more affordable entry into the Dan Wesson lineup, the Vigil Series pistols are all built around a forged aluminum frame with a stainless slide. The round-top slide wears a tritium sight on the front and a serrated tactical rear. The frontstrap is checkered 25 LPI, as is the rear that also features a rounded butt for comfortable carry, available in 9mm and .45ACP. With four different models the Vigil can be purchased in Government, Suppressor-Ready, Commander and CCO platforms. 

MSRP $1,298.00 • Where to buy: danwessonfirearms.com 

BARRETT 

MRAD Barrel Conversion Kit 

Barrett Firearms Manufacturing, Inc., the leader in long range, has been awarded a contract from the U.S. Department of Defense to provide an undisclosed number of MRAD rifle systems chambered in a new caliber, 300 PRC. The MRAD’s robust design, user modularity and unfailing accuracy, combined with the new precision rifle cartridge designed by Hornady, offer an unbeatable system for long-range effectiveness. 300 PRC MRAD Barrel Conversion Kits are available on Barrett’s webstore. 

MSRP: Starting at $1,535.00 • Where to buy: store.barrett.net

CMMG 

BANSHEE 300 

BANSHEE 300 Series 10mm rifle. 8-inch barrel, 30-round SGM Tactical Magazine, radial delayed blowback, AR platform—Last round bolt hold open. 

MSRP: $1,649.95 • Where to buy: cmmginc.com / Local retailer 

NIGHTFORCE OPTICS 

NX8 1-8×24 Riflescope 

The NX8 1-8×24 F1 puts the power of an 8x into a compact and lightweight riflescope. Optimized for short- to medium-range shooting. Its daylight visible, center red dot allows the shooter to engage targets with the speed of a red dot sight, but as range increases, its first focal plane reticle provides precise hold points. In close quarters, the NX8™ 1-8×24 provides a wide field of view; a quick turn to 8x allows precision shots. 

MSRP: $1,750.00 • Where to buy: nightforceoptics.com 

IWI 

TAVOR 7 

The all-new TAVOR 7 is the next evolutionary step in the Tavor bullpup family. It is an innovative, powerful and reliable weapon that can be rapidly and easily deployed in all combat situations. TAVOR 7 carries the usual reliability expected of all IWI products with some increased ergonomic features. 

MSRP: $2,099.00 Where to buy: iwi.us 

WEATHERBY 

Backcountry Rifle 

This rifle provides the craftsmanship and quality expected from a Mark V rifle only surpassed by the stunning color combination and true rugged dependability that embodies its name, Backcountry. This model carries many of the same innovative technologies including a carbon fiber stock, 3D HEX recoil reducer, TriggerTech Trigger and Accubrake ST. The Backcountry weighs in at a mere 5.3 pounds built on a 6-Lug receiver. 

MSRP: $2,499.00 • Where to buy: weatherby.com 

WEATHERBY 

Mark V CarbonMark Rifle 

The Mark V CarbonMark is a custom-built, stunningly precise rifle ready for any adventure. This carbon barrel is lightweight, accurate and fast-cooling. 95% of the carbon fiber does not touch the barrel allowing air to foil around the steel and rapidly cool the barrel. If you are looking for a combination of breakthrough rifle performance and rugged reliability this rifle should already be in your gun safe! 

MSRP: $2,499.00 • Where to buy: weatherby.com 

NIGHTFORCE OPTICS 

ATACR 4-16×50 Riflescope 

If there is such a thing as a “professional” riflescope, it is an ATACR. They are designed for military, law enforcement and other tactical professionals … and for those who simply want to shoot like a professional. Shooters who choose the ATACR 4-16×50 will enjoy superb low-light performance, ED glass, extensive elevation adjustment, all housed in a riflescope impervious to recoil from the largest calibers. A range of first focal plane reticles address any shooting environment. 

MSRP: $2,500.00 • Where to buy: nightforceoptics.com 

TRIJICON 

1-8×28 VCOG

The Trijicon 1-8×28 VCOG (Variable Combat Optical Gunsight) is a highly rugged, variable magnification riflescope designed for close-quarter battle (CQB) and long-distance marksmanship. With a forged aircraft-grade 7075-T6 aluminum housing, the VCOG is nearly indestructible. Superior glass provides exceptional clarity and color with zero distortion. The universal segmented circle crosshair dot reticle is designed for multi-platform use, offers 11 user-selectable brightness settings and is powered by a lithium AA battery.

MSRP: $2,800.00 • Where to buy: trijicon.com 

FLIR SYSTEMS, INC. 

Scion PTM 

FLIR Scion PTM packs high-performance thermal imaging into a rugged, IP67-rated handheld monocular. Capable of geotagged video recording and live video transmission, the Scion PTM can instantly stream encrypted thermal footage of any pursuit, evidence recovery or search and rescue effort to the command center via wireless network. A smooth 60 Hz refresh rate and picture-in-picture zoom capture minute details from a distance and maintain peripheral awareness for constant thermal supervision of suspects, team members, and standbys. 

MSRP: Starting at $3,295.00 • Where to buy: flir.com 

FLIR SYSTEMS, INC. 

ThermoSight Pro Series PTS536 

Powered by the breakthrough FLIR Boson core, the ThermoSight Pro Series PTS536 weapon sight sets the standard for thermal detection and classification. Featuring a 12 μm pixel pitch sensor and 50mm lens, the PTS536 delivers brilliant, clean thermal imaging with a focused 4.5° × 3.5° field of view. The entire ThermoSight Pro Series offers an uncompressed video signal, a high-definition display and shot-activated video recording. 

MSRP $3,795.00 • Where to buy: flir.com 

BARRETT 

MRAD Rifle System 

Barrett Firearms Manufacturing, Inc., the leader in long range, has been awarded a contract from the U.S. Department of Defense to provide an undisclosed number of MRAD Rifle Systems chambered in a new caliber, 300 PRC. The MRAD’s robust design, user modularity and unfailing accuracy, combined with the new cartridge designed by Hornady, offer an unbeatable system for long-range effectiveness. 

MSRP: Starting at $6,000.00 • Where to buy: store.barrett.net 

by Chris A. Choat

IWI Now Debuting UZI Pro Pistol and UZI Pro Pistol SB

The Uzi Pro Pistol and Uzi Pro Pistol SB are the latest evolution of that storied design, now featuring the most advanced firearms technologies. Based on the famous Uzi SMG, the Uzi Pro is purpose-built with only one goal: uncompromising performance and reliability on a robust design. This 9mm Luger Parabellum version for the American public sports an advanced polymer pistol grip that reduces weight and incorporates an integrated magazine release button for fast and easy magazine changes. The cocking handle is located on the receiver side allowing for a full-length Picatinny rail on the top receiver cover. A short Picatinny rail is also incorporated into the polymer body, mounted below the barrel, perfect for additional accessory placement. Two versions of the Uzi Pro Pistol will be available in the U.S. The first is the basic pistol but perhaps the most exciting news is that the Uzi Pro Pistol will also be offered with a side-folding stabilizing brace, the Uzi Pro SB. The stabilizing brace will be produced exclusively for IWI US by SB Tactical, LLC, designers and manufacturers of the original SB15 and SB47 Pistol Stabilizing Braces that have reinvigorated the market for large frame pistols in the U.S. Originally designed as a means for persons with limited mobility to operate and fire the AR-15 pistol, it soon became clear to shooters across the USA that by adding a stabilizing brace to their large frame pistols, they could achieve greater accuracy while enjoying an enhanced shooting experience through improved firearm stabilization and control.

The custom adaptation of the stabilizing brace to the Uzi Pro SB takes the application of large frame pistol control and stabilization to a new level. With the IWI brace’s unique side-folding feature, the Uzi Pro SB can be fired with or without the brace extended depending on the shooter’s need. With the brace in the folded position, storage space required in your safe or range bag is minimized. The new Uzi Pro and Uzi Pro SB feature three safety mechanisms: a conventional manual thumb safety, a firing pin block and a proven grip safety that must be fully depressed before the gun can be cocked and fired. Simple maintenance on the Uzi Pro requires no special tools for quick and easy field stripping. Each Uzi Pro Pistol comes with one 20-round and one 25-round magazine. Find out more at www.iwi.us.

Bushnell Announces Lynx Night VIsion Binocular

Bushnell, an industry leader in high performance sports optics for 65 years, has just introduced the new Lynx 2.5x 40mm night vision binocular. The Gen I night vision unit features 2.5 times magnification, a viewing range of 750 feet combined with a wide field of view and an extended battery life. With its compact ergonomic design, the night vision binocular measures just seven inches in length and weighs only 17 ounces. Depending on ambient light conditions, the built-in infrared (IR) spotlight can be turned on or off to improve the viewing experience. Powered with two AAA batteries, the night vision binocular can run up to 20 hours with the IR illuminated, or up to 70 hours with the IR off. The ability to manage the IR setting allows users to control the viewing experience while improving battery life. Built with a durable rubber-armored housing, the night vision binocular is easy to carry and field-ready. The Bushnell Lynx night vision binocular is available for a retail price of $599.99. You can contact them at www.bushnell.com.

Auto Ordnance Introduces Budget-Priced 1911BKO

USA based Kahr Firearms Group is proud to announce the introduction of the Auto Ordnance 1911BKO. The 1911BKO is only the second 1911 pistol to be introduced over the past year, following in the footsteps of the successful 1911TC model in stainless steel just last year. The Auto Ordnance 1911BKO frame incorporates GI specs and features a matte black finish frame, barrel and slide. The carbon steel slide, sear and disconnector are machined from solid bar stock and heat treated properly to assure durability and long life over many thousands of rounds. The low-profile sights feature a blade front sight and a rear drift adjustable for windage. The grip is brown checkered plastic. This .45 ACP has a 5 inch barrel, length is 8.5 inches overall and weighs just 39 oz. The 1911BKO is 100% made in the USA and ships with one 7-round magazine. The BKO has a thumb safety, grip safety and firing pin block and carries a retail price of just $517. For more information on the complete line of Auto Ordnance products, please visit www.auto-ordnance.com.

Lancer Introduces Adaptive Magwell and SIG 716 Handguard

Lancer Systems LP, a leading advanced weapons and components manufacturer, has just announced the availability of two new products: the Adaptive Magwell and SIG Sauer 716 Replacement Handguard. Both are engineered using advanced, high-performance technologies to reduce weight and maximize reliability, exceeding military standards. The Lancer Adaptive Magwell is machined from 6061 T6 aluminum and is designed to fit mil-spec 5.56 AR style rifles. The component increases the diameter of the magwell and the speed with which the rifle can be reloaded. It is installed by opening the winter trigger guard and attaching the lower half to the trigger, then engaging the lower component to the trigger guard attachment on the rifle. The upper component is then slid on from the front and attached with two Allen screws. Retail price is $99.99. The Lancer replacement handguard for the SIG 716 features a free float design with aluminum Picatinny sight rail at 12 o’clock. It also has an octagon carbon fiber tube with cut-outs to expose the gas block adjusting knob. Cooling slots in the tube accept rails and slots at 6 o’clock and accept a rail for mounting a bi-pod. Available with top rails in carbine length, 7.4 inches, and extended length, 13.1 inches. Prices start at $274.99. Contact them at
www.lancer-systems.com.

TargetVision Introduces Portable Remote Target Changer

The new Portable Remote Target Changer has just been introduced by TargetVision. The Portable Remote Target Changer is an aluminum, battery powered, wireless target changing system with AR500 armor plating. With the push of a button, a user can roll down a fresh, new target from up to 600 yards away. The unit can easily be set up by one person. The system minimizes a shooters number of trips down range and is the perfect complement to a wireless spotting scope to improve their overall shooting experience. The unit operates on 900MHz radio frequency and weighs 97 pounds. It is powered by rechargeable lithium ion batteries and has an assembled height of 3 feet 6 inches. The target size is 24 by 24 inches. It comes with a 74 count roll of targets, a 12 volt DC charger and a remote controller. The target changer can also be ordered with its own fitted Pelican case. For more information go to www.targetvisioncam.com.

Magnum Research Announces First All Stainless Desert Eagle

Magnum Research has taken their most iconic handgun, the Desert Eagle, and given it an exciting new look. For the first time ever, the Desert Eagle .50 AE can now be purchased with an all stainless steel construction in the frame, slide, barrel, rail on the frame and an integral muzzle brake. The stainless steel models are 100% made in the USA and currently in production ready to ship to wholesalers and dealers. The Desert Eagle has always been considered a bit of a beast, but now, with the rugged stainless steel frame, slide and barrel, black appointments, and the new Picatinny bottom rail for accessories, it has a very distinctive new look. This high quality stainless steel model has an overpowering appearance at the gun counter and at the range, and it will be much easier to repair minor scratches than some of their other custom finish models. Also new from Magnum Research for 2015, the Desert Eagle all stainless steel model is offered in either a standard 6 inch barrel or with an integral muzzle brake. The integral muzzle brake is also offered on the DE50, DE44, and the DE357 6-inch barrel models in black. The integral muzzle brake will replace the add-on brake that Magnum Research has offered for several years. The integral muzzle brake offers significant recoil reduction, less muzzle flip and a new streamlined look. In addition, since the overall length remains the same as the standard 6 inch barrel model, the same holsters will fit the integral brake model. The integral muzzle brake model also means it can be offered at a lower price than the add-on muzzle brake. For more information and ordering instructions contact them at www.magnumresearch.com.