“John Paul” founded JP Enterprises in 1991 after 13 years of running a specialty store and gunsmithing business. Since then, he, and later his son, have created progressively more refined variants of AR-15 and AR-10 designs. Since 1955, these two Stoner rifles have undergone numerous refinements. The most visible of these is the relocation of the charging handle from inside the “carry handle” to the back of the receiver. That change enabled easier installation of optics and also kept the charging handle cool during sustained fire. Other improvements included free-floating forends, better triggers, and more robust stocks. It took JP’s genius to get the AR-10/15 platform to where it performs accurately and comfortably with sound suppressors. 

As a military weapon designed to work in stock configuration, M16s and AR-10s perform quite well. However, JP modifications resulted in significantly more useful rifles for individuals interested in suppression without over gassing, extreme accuracy, or effectively functioning with unconventional ammunition. The JP LRI-20 features the time-proven LRP-07 (Long Range Precision) lower, with LRI (Long Range Integral) upper. The word “Integral” in the LRI-20 name refers to the improved forend mounting system that promotes precise, rigid alignment with the receiver. 

The most obvious difference between a JP rifle and a standard AR-15 is the large, folding side charging handle. The standard AR-15 is difficult to use in the event of a stuck casing, providing insufficient surface area for the fingers to grasp. The JP handle, which is much wider than those of other side-chargers, provides a whole-hand grip and allows charging without breaking the cheek-weld. Its forward location makes for a more natural motion than the rear-placed standard part. From this change comes another advantage: the back of the receiver is completely enclosed. Any smoke or gas that ends up in the receiver comes out through the ejection port, not through the charging handle opening right by the shooter’s eyes. Any gas that might try to escape from the side-charging handle slot is thoughtfully blocked with a sliding cover.

Fortunately, over-gassing due to back-pressure from a sound suppressor or an aggressive muzzle brake is not a problem for JP rifles. The LRI-20 upper has an adjustable gas block that is operable with a simple hex wrench. While it doesn’t have markings for repeatable positions, an indicator line is easy to add, and the port is accessible without dismounting the forend. John Paul recommends using gas adjustments for small-scale tuning, especially for target shooting. For major changes or rough field use, he advises swapping the bolt and buffer weights.

This is where another useful feature comes in. The rifles are available with low, standard, and variable mass bolt carriers. The mass of variable carriers can be fine-tuned with steel or tungsten weights. The heaviest configuration slows down the bolt opening just enough to drop the gas pressure in suppressed configurations to ensure a clean cycle. The lightest aluminum carriers are paired up with low-mass titanium firing pins to reduce the amount of reciprocating weight in competition rifles. My sample rifle had a variable-weight carrier configured with two tungsten weights, and one steel weight for suppressed use. It also included the JP Silent Captured Spring, a required replacement of the standard AR spring and buffer. Precision-centered and polished, this combo also permits fine-tuning with steel and tungsten weights. The same part can be configured with weights and a spacer to work in an AR-10, AR-15, or a 9mm blowback rifle. Unlike Stoner’s original buffer with its characteristic “boing”, JP rifle buffers remain silent during the cycle.

This isn’t the first time I’ve used JP rifles. I’ve shot the .308 LRP-07 in 2010, and the .223 SCR-11 Rifle the following year. Setting up the LRI-20 was very straightforward: the gas required no adjustment, and zeroing with the 6-24 Meopta scope took only eight rounds of 168gr Federal Gold Medal Match. While any quality ammunition can be used to good effect, that is the recommended load. With the standard two-port muzzle brake and compensator, the .308 rifle’s recoil was reduced to sub-.223 level and muzzle rise eliminated, permitting spotting of shots through the scope at one hundred yards.

Unlike dedicated sporting guns, this rifle retains the forward assist and the dust cover. The extensively ventilated 17.5-inch forend is coupled with the nut integrated into the receiver for best stability. With the front rail attachment very near the muzzle, it gives the best possible stability on an Atlas bipod. The distance between the buttstock and the bipod is maximized, translating any rear movement into a smaller angular change for more precise aiming. For a higher volume of fire, a finned aluminum radiator can be added to the barrel. The standard JP MK III Handguard System uses 10-32 screws for adding rails and other accessories where needed, leaving the surface streamlined for easy handling.

The JP LRI-20 features a 20-inch barrel that is air-gauged and cryogenically treated for utmost consistency even when hot. 0.5 MOA is guaranteed: and I’ve seen results in the one-third MOA range with factory match ammunition. Its trigger weighs in at 3.6 lbs., but it feels significantly lighter thanks to the crisp break. Felt recoil is mild, the break is not concussive, and muzzle-rise is minimal as to permit spotting your own shots at 100 yards. In other words, I had almost the same experience with the LRI-20 as I did with the .223 SCR-11 Rifle, just while making bigger splashes on steel downrange.

A thread-on Thunder Beast  Arms Corporation titanium sound suppressor reduced the noise considerably while keeping the recoil about the same as with the brake. My point of impact shifted about 2MOA between the brake and the muffler, but accuracy was unchanged. Blowback while shooting suppressed was minimal, and no blowback at all was perceived once the gas port was closed by half of a turn. The enclosed back of the receiver is perfect for use with silencers.

My experiences with all four JP Rifles so far have proven them to be 100% reliable with or without the can; and I did not experience a single failure of any kind. With Federal Gold Match 168gr open tip bullets, the spread was around 0.5 MOA, as advertised. The same results were obtained with Hornady 168gr match and PRIME 175gr match. Plain 150gr plinking FMJ shot 1.5 MOA. Magtech 168gr match achieved 1.3MOA, same as Federal Fusion Soft Point.

The LRI-20 is also available in 6mm and 6.5mmCreedmoor, as well as 260 Remington calibers. In my experience, 6.5 Creedmoor edged out the .308 for accuracy at 0.3 MOA with factory Hornady and Federal Match ammunition. John Paul recommends handloading to the specific rifle for consistent groups at 0.5 MOA, and he has produced several informative videos on turning the gas system and the handloads to each other (see them at youtube.com/user/JPRifles). At my shooting skill level, I will take the 0.5MOA dispersion with the comfortable ergonomics and mild recoil and apply my time to learning how to calculate dope and wind better.

The JP LRI-20 rifle with PRS stock, the scope, a sling, a full magazine, and the Atlas bipod weighs around 14.5 pounds. For more on the JP LRI-20, please visit JP Enterprises.

AIMPOINT®
ACRO™ P-1 Red Dot Reflex Sight
The ACRO P-1 was developed for use on pistols and other firearms requiring a small enclosed red dot sight. It is has proven to stand up the extreme shock, vibration, temperature changes and material stress generated by firing over 20,000 rounds of .40 S&W ammunition. Aimpoint red dot sights are operationally parallax-free, which means the visible dot remains parallel to the bore of your weapon no matter what angle your eye is in relation to the sight. Therefore, the user never has to worry about centering the dot inside the sight. If you have a proper zero, when the dot is on the target, so are you. Aimpoint red dot sights increase confidence by allowing the shooter to focus on the target while keeping both eyes open, fully situationally aware at all times. Users can achieve first round hits faster with greater confidence.
aimpoint.us
Optical Magnification: 1x
Length/Width/Height: 1.9 x 1.2 x 1.2in
Weight: 2.1oz
Illumination Source: Point Source LED
Illumination Color: Red
Battery Type: CR1225
Battery Life: 15,000 hours
Waterproof: Yes, to 80ft
Mount: Weaver / MIL-STD 1913 rail system / Picatinny
Housing Material: 6061-T6 Aircraft-grade extruded
Finish: Matte Black
For pistol make: Pistols, carbines, shotguns, rifles and applications which require a low-profile red dot system
MSRP (USD): $599

BURRIS® OPTICS
FastFire™ 4
The FastFire 4 is an improvement on its predecessors providing increased impact resistance and a larger sight window for a greater field of view. No longer restricted to one reticle, shooters can now select from four versatile options suitable for multiple shooting scenarios through the quickly accessible side toggle buttons.
burrisoptics.com
Optical Magnification: 1x
Length/Width/Height: 1.9in (length)
Weight: 1.6oz
Illumination Source: N/A
Illumination Color: Red
Battery Type: CR1632
Battery Life: N/A
Waterproof: Yes
Mount: Picatinny / Docter® optic
Housing Material: Impact-resistant
Finish: Matte
Fits what make of pistol: Handguns, rifles and shotguns
MSRP (USD): $455

BUSHNELL [NEW]
RXS-100 Reflex Sight
The RXS-100 offers class-leading value that starts with multi-platform versatility with its DeltaPoint® Pro mounting pattern, daylight bright 4-MOA red dot with eight settings, side battery door, up to 5,000 hours of battery life and an included Weaver-style, low-rise mount. RXS-100 mounts on pistols, ARs and shotguns.
bushnell.com
Optical Magnification: 1x
Length/Width/Height: 1.8in (1.9in overall)
Weight: Without base: 1.3oz; With base: 2.2oz
Illumination Source: Point Source LED
Illumination Color: Red
Battery Type: CR2032
Battery Life: Up to 5,000 hours
Waterproof: Yes, IPX7 (Water-resistant)
Housing Material: 6061-T6 Aircraft-grade extruded
Finish: Matte Black
For pistol make: Direct mountable to DeltaPoint Pro standard; Weaver-style mount included; pistols, ARs and shotguns
MSRP (USD): $99.99

BUSHNELL [NEW]
RXS-250 Reflex Sight
The RXS-250 represents a new standard of high-performing reflex slights with its MIL-STD-810F impact-resistant design, clear 4-MOA red dot, user-adjustable brightness settings and True Tone coatings that provide users with a vivid, clear view, free of color distortion. A desirable option for pistols, rifles and shotguns, the RXS-250 also offers industry-leading battery life.
bushnell.com
Optical Magnification: 1x
Length/Width/Height: 1.8in (1.9in overall)
Weight: Without base: 1.4oz; With base: 2.3oz
Illumination Source: Point Source LED
Illumination Color: Red
Battery Type: CR2032
Battery Life: Up to 5,000 Hours
Waterproof: Yes, IPX7 (Water-resistant)
Housing Material: Cast aluminum (exceeds the requirements of MIL-STD-810 drop testing)
Finish: Matte Black
For pistol make: Direct mountable to DeltaPoint® Pro standard; Weaver-style mount included; pistols, rifles and shotguns
MSRP (USD): $249.99

CRIMSON TRACE®
CTS-1250
The CTS-1250 Electronic Sight is a compact, open reflex sight for pistols. Featuring a 3.25 MOA round aiming dot, the CTS-1250 will elevate your pistol’s performance instantly. Easily user-installed by utilizing an industry-standard mounting interface (uses industry standard mounting interface matching: Burris® FastFire™, JP Enterprises Docter™, Vortex Venom® and Vortex Viper®), the CTS-1250 boasts high efficiency LED for years of use. This open reflex sight is covered by a 3-year protection guaranteed warranty and Free Batteries For Life program.
crimsontrace.com
Optical Magnification: 3.25 MOA
Length/Width/Height: 4.6 x 3.5 x 2.5in (packaging)
Weight: 1.11oz
Illumination Source: High-efficiency LED
Illumination Color: Red
Battery Type: Lithium Coin Cell, CR1632
Battery Life: 40,000 hours (4.5 years)
Waterproof: IPX7 (1m for 30 minutes)
Housing Material: 6061 aluminum
Finish: Type 2 black anodize
For pistol make: Fits standard Docter mounting pattern; GLOCK 01 plate, S&W Type 3 or 5 plate, FN Docter plate, Walther Plate 01
MSRP (USD): $299.99

JP ENTERPRISES
JPoint™ MRD Sight
The JPoint is the lightest MRD available with a minimal profile to match. From a low light to daylight, its auto-adjusting light sensor ensures reliable service in any environment. Whatever the weapon, the JPoint adds fantastic utility without encumbrance, making it a great optic choice for any number of applications.
jprifles.com
Optical Magnification: Reflex (1x)
Length/Width/Height: 1.7 x 1.0 x 0.9in
Weight: 0.5oz
Illumination Source: LED
Illumination Color: Red
Battery Type: CR2032
Battery Life: 2–3 years (average use >4 years)
Waterproof: No
Reticle Pattern: Dot (4 MOA or 8 MOA)
Day Reticle Color: Red
Night Reticle Color: Red
Mount: Wide range available
Housing Material: Polymer
Finish: Matte Black
For pistol make: Many, with appropriate mount
MSRP (USD): $299.95

PRIMARY ARMS® / HOLOSUN
HS507C-X2 Pistol Red Dot Sight
The co-branded Holosun HS507C-X2-ACSS is the first mini reflex sight to feature Primary Arms’ brand-new, patent-pending ACSS® Vulcan™ Reticle. The reticle’s groundbreaking technology improves user agility and target acquisition through an innovative “heads-up” design. Priced at $309.99, the HS507-X2-ACSS brings the advanced features of premium optics to every budget.
primaryarms.com
Optical Magnification: N/A
Length/Width/Height: N/A
Weight: 1.5oz
Illumination Source: LED
Illumination Color: Red
Battery Type: CR1632 3V lithium coin
Battery Life: 50,000 hours
Waterproof: N/A
Reticle Pattern: ACSS-Vulcan
Day Reticle Color: Red
Night Reticle Color: Red
Mount: Picatinny
Housing Material: 7075-T6 aluminum
Finish: Black hard coat anodize
For pistol make: Handguns, rifles, shotguns, pistol caliber carbines with Picatinny base
MSRP (USD): $309.99

RITON OPTICS
X3 Tactix MPRD
The X3 Tactix MPRD is an extremely compact and versatile pistol red dot with a 3 MOA dot that will ensure ultimate precision and rapid target acquisition. Designed with a Shield RMS-C Footprint, the optic features a 12-hour auto shut off and 10 levels of brightness with night vision compatibility on Levels 1-2.
ritonoptics.com
Optical Magnification: N/A
Length/Width: 1.6 x 0.98in
Weight: 0.6oz
Illumination Source: CR2032 battery
Illumination Color: Red
Battery Type: CR2032
Battery Life: 50,000 hours (12-hour auto shutoff)
Waterproof: Yes
Reticle Pattern: 3 MOA Red Dot
Day Reticle Color: Red
Night Reticle Color: Red
Mount: Direct mount to Shield RMS-C Footprint pistol cutout on slides
Housing Material: 6061 Aircraft-grade aluminum
Finish: Hard coat anodize
For pistol make: GLOCK 43X MOS, GLOCK 48 MOS, SIG SAUER P365XL, Springfield Hellcat, SCCY DVG1, SCCY CPX-1/2, SCCY CPX-3/4
MSRP (USD): $299.95

SIG SAUER
ROMEOZero™
The fastest, most accurate, ultra-compact micro reflex sight. The ROMEOZero is optimized for everyday concealed carry pistols and slim slide profiles, featuring a ruggedized, WeaponsGrade™ textured polymer body and SpectraCoat™ HD Polymer lens. The ROMEOZero enables rapid target acquisition in an everyday carry package at an iron sight price.
sigsauer.com Optical Magnification: 1x
Length/Width/Height: .1.6 x .93. x .93in
Weight: 0.4oz
Illumination Source: Point Source LED
Illumination Color: Red
Battery Type: CR1632
Battery Life: Up to 10 years
Waterproof: No
Housing Material: Polymer
Finish: Black
For pistol make: P365XL, concealed-carry pistols and slim slide profiles such as 1911s and sub-compact firearms
MSRP (USD): $219.99

SIG SAUER
ROMEO1Pro
A miniature open reflex sight is designed for fast, responsive target acquisition and accuracy. The ROMEO1Pro sight is engineered to withstand the punishment of harsh environments. This sight is capable of mounting to any SIG SAUER pistol or any pistol machined to accept the ROMEO2 / PRO Reflex sight interface and mounting hold spacing.
sigsauer.com Optical Magnification: 1x30mm (3 MOA or 6 MOA)
Length/Width/Height: 1.8 x 1.0 x 1.1in
Weight: 1.0oz
Illumination Source: Point Source LED
Illumination Color: Red
Battery Type: CR1632
Battery Life: 20,000+ hours
Waterproof: Yes
Mount: ROMEO1Pro mount
Housing Material: Aircraft-grade CNC aluminum
Finish: Black or FDE
For pistol make: SIG SAUER pistol or any other pistol machined to accept the ROMEO2 / PRO Reflex sight interface
MSRP (USD): $439.99

TRIJICON
Trijicon SRO®
The Trijicon SRO is specifically designed for pistol use. The wide field of view and clean, crisp dot makes it easy for users to find and track the dot in both target and competitive shooting applications. Every SRO features both manual and automatic brightness modes with a top-loading CR2032 battery.
trijicon.com
Optical Magnification: 1x
Length/Width/Height: 2.2 x 1.3 x 1.4in
Weight: 1.6oz
Illumination Source: LED
Illumination Color: Red
Battery Type: 2032
Battery Life: 3 years of continuous use at setting 3 of 8
Waterproof: Yes, to 10ft
Reticle Pattern: Dot
Day Reticle Color: Red
Night Reticle Color: Red
Housing Material: 7075-T6 aluminum
Finish: Matte Black
MSRP (USD): $749

TRIJICON
RMR®cc
Born from the legendary Trijicon RMR®, the thinner, lower profile RMRcc provides fast, both-eyes-open target acquisition, accurate aiming and proven reliability. Weighing a mere 1 ounce with battery installed and measuring less than 1 inch in width and height, the RMRcc is ready to pair with any concealed carry pistol.
trijicon.com
Optical Magnification: 1x
Length/Width/Height: 1.8 x .95 x .97in
Weight: 1oz
Illumination Source: LED
Illumination Color: Red
Battery Type: CR2032
Battery Life: 4 years at setting 4 of 8
Waterproof: Yes, to 66ft
Reticle Pattern: Dot
Day Reticle Color: Red
Night Reticle Color: Red
Housing Material: 7075-T6 aluminum
Finish: Matte Black
MSRP (USD): $699

U.S. OPTICS (USO) [NEW]
DRS 2.0
The DRS 2.0 is the perfect red dot solution for your handgun. Its 6-MOA dot with 10 intensity settings and wide field of view makes target acquisition accurate and fast.
usoptics.com
Optical Magnification: 1x
Length/Width/Height: 1.81 x 1.06 x .96in
Weight: .063lb
Illumination Source: Open emitter
Illumination Color: Red
Battery Type: CR2032
Battery Life: 2-3 years
Waterproof: Yes
Reticle Pattern: Dot
Day Reticle Color: Red
Night Reticle Color: Red
Mount: Docter / Viper
Housing Material: 6061-T6 aluminum
Finish: Black Type III hard anodize
For pistol make: Any pistol with a Viper footprint optic cut
MSRP (USD): $249

U.S. OPTICS (USO) [NEW]
DRS 2.0 Enhanced
The DRS 2.0 Enhanced will undoubtedly help you find your target fast and accurately. Its 5-MOA, daylight-bright, ambient light-sensing red dot is perfect for precise hits.
usoptics.com
Optical Magnification: 1x
Length/Width/Height: 1.81 x 1.06 x 1.02in
Weight: .076lb
Illumination Source: Open emitter / Ambient light
Illumination Color: Red
Battery Type: CR2032
Battery Life: 2-3 years
Waterproof: Yes
Reticle Pattern: Dot
Day Reticle Color: Red
Night Reticle Color: Red
Mount: Docter / Viper
Housing Material: 6061-T6 aluminum
Finish: Black Type III hard anodize
For pistol make: Any pistol with a Viper footprint optic cut
MSRP (USD): $349

VORTEX OPTICS
VENOM® Red Dot
The low-profile, yet rugged aluminum housing of the VENOM red dot surrounds a large viewing window that makes for a wide field of view and sight picture with next-to-no obstruction for rapid shooting transitions and target acquisition. Users can choose between 10 levels of brightness in manual mode or switch to auto-mode.
vortexoptics.com
Optical Magnification: 1x
Length/Width/Height: 1.9 x 1.11 x 1.02in
Weight: 1.1oz
Illumination Source: N/A
Illumination Color: Bright Red
Battery Type: CR1632
Battery Life: Up to 150 hours on highest setting; up to 30,000 hours on lower settings
Waterproof: Yes
Reticle Pattern: Dot
Day Reticle Color: Bright Red
Night Reticle Color: Bright Red
Mount: Weaver / Picatinny
Housing Material: Aluminum
Finish: Matte anodize
For pistol make: ARs, pistols or shotguns
MSRP (USD): $349.99

VORTEX OPTICS
VIPER® Red Dot
The Viper red dot’s super low mounting height makes it the perfect solution for handguns with cutout slides. The Viper offers the simplicity and speed advantage of a red dot, while co-witnessing with suppressor-height iron sights.
vortexoptics.com
Optical Magnification: 1x
Length/Width/Height: 1.81 x 1.06 x 1.02in
Weight: 1.03oz
Illumination Source: N/A
Illumination Color: Bright Red
Battery Type: CR2032
Battery Life: Up to 150 hours on highest setting; up to 30,000 hours on lower settings
Waterproof: Yes
Reticle Pattern: Dot
Day Reticle Color: Bright Red
Night Reticle Color: Bright Red
Mount: Weaver / Picatinny
Housing Material: Aluminum
Finish: Matte anodize
For pistol make: Handguns with cutout slides
MSRP (USD): $349.99

CZ USA

CZ Scorpion Bullpup Kit

Relying on the bullpup expertise of the aftermarket design gurus over at Manticore Arms, the Scorpion Bullpup Kit has been a project long in the making. Able to convert any Scorpion over to a bullpup configuration, it reuses trigger components of the gun being converted and condenses the Scorpion down to an even smaller package. The ideal candidate for conversion is the Scorpion Carbine, and the bullpup chassis ties into our standard Carbine handguard as well as Manticore and HB Industries long handguards. With the addition of one of those handguards, Scorpion pistols can be converted, though doing so with a barrel length less than 16 inches will require proper paperwork/tax stamp and conversion of the pistol to an SBR. For those who want to modify their Scorpion Bullpup, it retains the ability to take aftermarket grips, trigger shoes, charging handles and magazine releases.
cz-usa.com

FEDERAL

Shorty Shotshell

Great things really do come in small packages. Although just 1 ¾-inch long, new Shorty shotshells offer similar patterns, energy and accuracy as full-size counterparts. Now available in 8-shot, 4-buck and rifled slug loads, perfect for fun at the range. federalpremium.com

JP ENTERPRISES

LTC-19

This lighter-weight receiver design is the first dedicated top-charge offering for large-frame (AR-10) rifles. The LTC-19 is available as a custom rifle or upper assembly build (compatible with DPMS-style AR-10 lowers) or as JP Ready Rifle configuration available for immediate shipment. A 1x 10-round magazine is included and is upgradeable to 25 rounds.
jprifles.com

JP ENTERPRISES

MR-19

The MR-19 serves as a collaborative rifle project between JP and other premier manufacturers in the precision rifle market, including the well-regarded Ultimatum Precision and Proof Research. The MR-19 is built on JP’s recently released APAC precision rifle chassis. This next generation chassis system is fully ambidextrous and adjustable. The MR-19 also utilizes the Deadline short action from Ultimatum Precision. The MR-19 utilizes a custom-contoured 26-inch barrel from Proof Research.

Designed as a turnkey precision rifle package, the MR-19 includes standard upgrades such as a Magpul MIAD pistol grip, JP Thermal Dissipator heat sink, full-length Arca-Swiss adapter and custom-cut foam designed to fit the Pelican iM3200 Storm long case. Standard caliber offerings are 6mm and 6.5 Creedmoor with right- and left-handed actions available. jprifles.com

TANGODOWN

BG-AKOE BATTLEGRIP

The BG-AKOE BATTLEGRIP offers an option to those who are NOT seeking a storage compartment. The grip offers a comfortable ergonomic design and aggressive non-slip texture. The BG-AKOE is made from the same durable material as the entire BATTLEGRIP line. TangoDown.com

COLT’S MANUFACTURING CO.

XM177E2 Carbine Reissue

This Retro Classic Carbine is built to the Original Colt Model 629 specifications from the 1960s. The 11.5-inch barrel has an extended flash hider designed to replicate the original moderator that was so iconic for this model. Colt cut no corners, reproducing the original vinyl-acetate-coated Aluminum buttstock and reproducing the U.S. property-marked roll marks. This is a true collectible that’s as comfortable on the range as it will be in an enthusiast’s display.
colt.co

SAVAGE ARMS

Rascal FV-SR

Squeeze even more accuracy from the industry’s safest micro rimfire. The Rascal FV-SR delivers pint-size precision thanks to a heavy bar-rel with a threaded (1/2-28) muzzle. Like the original Rascal, the single-shot rifle cocks by lifting the bolt and unloads easily—without pulling the trigger. The design also builds superior shooting skills thanks to full-size rifle features, including a tough synthetic stock and Savage’s user-adjustable AccuTrigger system. Other features include: manual safety; feed & ear plugs; and tactical bolt handle. savagearms.com

A*B ARMS

Mossberg M500 Adapter

The AB Arms Mossberg M500 Tactical Shotgun Adapter is a bolt-on replacement adapter specifically designed for the Mossberg 500 Pump Action Shotgun. The adapter easily bolts to rear of the shotgun receiver without any alterations to your firearm. The AB Arms Mossberg M500 Tactical Shotgun Adapter is a lightweight, Aluminum adapter that provides a quality, flexible upgrade to the existing factory stock. The adapter is able to accept after-mar-ket AR-15 pistol grips and buttstocks that use carbine length buffer tubes. abarms.com

SMITH&WESSON
M&P Shield M2.0 Pistol Available with Green Laser

Smith&Wesson announced the addition of a new M&P Shield M2.0 pistol with integrated Crimson Trace green laser to its popular line of M&P Shield polymer pistols. An ideal choice for concealed carry, the new M&P Shield M2.0 pistol with green laser provides confidence and reliable performance, day or night, in a slim, lightweight and easy-to-carry profile.

Available in 9mm and .40 S&W, the M&P Shield M2.0 pistol with integrated green laser retains familiar M&P pistol operating features, including a slim profile and 18-degree grip angle for a natural point of aim. The M&P Shield M2.0 pistol with integrated green laser features two laser modes, ambidextrous laser activation and the enhanced M2.0 feature set, including a light, crisp trigger and the M2.0 aggressive grip texture for enhanced control. smith-wesson.com

TANGODOWN INC.
iO Optic Covers

TangoDown Inc. is pleased to provide protective iO optic covers for the following optics: Aimpoint T-1/H-1; Aimpoint T-2/H-2; and the Trijicon MRO. All of the iO covers feature solid caps to protect the lenses from scratching. The caps conveniently nest together to stay out of the way while the optic is in use. The covers offer a snug fit to keep the elements outside without adding weight to the weapon system. All of the covers are made of durable thermoplastic polyurethane material. The iO covers are available in black and flat dark earth. tangodown.com

MAXPEDITION
Entity Series Covert Concealed Carry Bags

The purpose-built packs of the Entity series goes beyond stripping MOLLE off of existing styles. Maxpedition designed them from the ground up, allowing function and purpose to dictate their forms and taking bold steps away from the typical “tactical gear” look, which immediately draws undue attention to the wearer. The new designs allows the wearer to blend into any setting while concealing lifesaving gear all in a sleek, subdued package. The Entity series packs are meticulously hand-built and also thoroughly lab and field tested. As such, they are as durable and dependable as all other Maxpedition products. The Spring 2018 launch of the Entity series consists of 10 new products: 3 backpacks, 1 sling pack, 4 pouches and 2 hook and loop accessories. maxpedition.com

STREAMLIGHT
POLYTAC X Flashlight

Streamlight Inc., announced a new enhanced, dual-fuel version tactical flashlight. The new PolyTac X features 600 lumens and offers the versatility of a rechargeable battery option.

The light can be powered by either two 3-volt CR123 lithium batteries or one Streamlight rechargeable 18650 lithium ion battery that can recharge either one or two batteries simultaneously and permits charging through either AC/DC or USB power sources. This multi-battery option allows for use of primary disposable batteries if the rechargeable cell is out of power.

The PolyTac X uses a power LED to provide three lighting modes: high, medium, low and strobe. Regardless of battery source, the light delivers 600 lumens on high, 11,485 candela and a 205-meter beam distance, which is enough to provide critical lighting for a range of tactical uses.  The light’s TEN-TAP programmable push-button switch allows users to select from three programs: high/strobe/low (factory default); high only or low/medium/high.

The lightweight PolyTac X is exceptionally durable, featuring a case made of high impact super tough nylon polymer that also provides a sure grip. The new light features an IPX7-rated design, providing waterproof operation to 1 meter for 30 minutes and is impact-resistant tested to 3 meters. The light measures 5.46 inches and is available in black, yellow, or coyote. streamlight.com?

BATTLE RIFLE COMPANY
BR10 Rifle Platform

The BR10 platform is Battle Rifle Company’s second generation of precision 7.62×51/.308 caliber rifle, designed with the serious shooter in mind. This is a combat grade rifle, worthy of consideration for the most demanding applications. The BR10’s unique platform features the following:

• Custom 7075 T6 matched upper and lower receivers
• Proven polygonal rifled 416 stainless steel barrel with sub MOA performance in18-inch
• Cryogenically treated barrel adds to both performance and accuracy
• Odinworks T6 rail standard with Keymod design with 5-slot accessory rail
• Performance Bolt Carrier Group with lower weight
• Geissele SSA 2-stage trigger, standard
• AXTS Raptor charging handle
• Ambidextrous Selector switch
• Upgraded spring and buffer for maximum performance
• Matched to perform with the low-mass system
• Compact muzzle break with 5/8×24 thread
• QD single point sling back-plate
• Magpul ACS Stock

The BR10 platform has an 18-inch 416SS barrel with Nitrite finish, a 1-inch 9.73 twist rate, a weight of 8 pounds, 11 ounces and overall length of 39.75 inches. Each BR10 purchase comes with one metal magazine and a tactical bag. battleriflecompany.com

DRD TACTICAL
FERRO 9mm Semi-Auto Pistol

DRD Tactical announces the release of FERRO 9mm. The FERRO is manufactured with stainless steel frame, slide and barrel. The pistol comes with an Apex tactical trigger, extended slide lock, magazine release and night sights. Available with non-threaded 4.48-inch barrel or threaded 4.88-inch barrel. Comes with three Magpul Pmag 17rd GL9 magazines. Available finishes are Black Nitride or NiB Battleworn. FERRO will be shipping to dealers in late Q1?/?2018.

DRD Tactical specializes in design and manufacturing of patented Multi-Caliber Semi-Automatic Rifles in .338 Lapua Magnum, .300 Norma Magnum, 7.62 Nato, 6.5 Creedmoor, 5.56 Nato and .300BLK, along now with pistols in their modern CNC manufacturing facility. drdtactical.com

NIGHTFORCE OPTICS
NX8 Family of Riflescopes

Nightforce Optics introduced a completely new category of optics to their line of finely crafted and durable riflescopes. The state-of-the-art NX8 series is built upon the legendary NXS family of riflescopes, well-known for their robustness and battle-proven design. The first riflescope unveiled in the NX8 family is the new NX8 1-8×24 F1 optic. Specifically designed for short- to medium-range shooting, the compact NX8 1-8×24 F1 riflescope delivers trusted Nightforce performance to virtually any rifle platform and boasts true 1x magnification capability.

As targets increase in distance, the intelligent FC-MIL or FC-MOA first focal plane reticle options provide precise hold points. For those preferring to dial for long shots, the turrets feature Nightforce ZeroStop elevation-adjustable technology with windage limiter, allowing for a rapid return to absolute zero regardless of any previous elevation adjustments. Adjustments are a true .2 Mil-Radian or .50 MOA. And, to aid in fast magnification adjustments, the Power Throw Lever (PTL) is included. nightforceoptics.com

JP ENTERPRISES
JPFC-M AR Trigger

Beyond combining the quality of a JP trigger with unmatched ease of installation, the new JPFC-M incorporates an interchangeable shoe feature for user customization. The core module can be easily reconfigured with one of three different shoe designs: curved, flat and roller. Shooters of any discipline or application will find an option to suit their purpose and preference.

Preassembled and hand-tuned in a stainless steel housing, the JPFC-M features wire-cut components for a super-precise relationship requiring no user adjustment. Installation of the module is nothing more than inserting the trigger pins and tightening down two screws to secure the module in place.

The JPFC-M comes packaged with the user’s choice of shoe style and color for the curved or flat shoes, each available in black, silver, red or blue. Also included are JP’s signature Anti-Walk Pins and an ambidextrous safety selector with levers color-matched to the trigger. Two alternate rate hammer springs allow for user customization of trigger pull. jprifles.com

BUSHNELL
XRS II RIFLESCOPE

Delivering precisely aimed rounds at extreme distances is a skill honed with practice–and the proper scope. The XRS II is Bushnell’s flagship optic, crafted to the most exacting standards. ED Prime Glass delivers rich color and contrast, even in low-light conditions. The 4.5-30x zoom and wide 50mm objective lens are designed to acquire targets well beyond 1,000 yards. Making adjustments is a simple and accurate process, with a lock windage turret and an elevation turret featuring a RevLimiter Zero Stop that will not turn past zero. Military, law enforcement and competitive shooters demand precision, and the XRS II delivers.

Industry Leading Features:

• Removable Throw Lever–Enables quick magnification changes.
• Precise–10 MILs per revolution on elevation, windage turrets for exact adjustments.
• Locking Diopter–Maintains scope’s focus, no matter what.

bushnell.com

SRT ARMS
Integrally Suppressed Ruger MkIV Pistol

This is the latest version of the outstanding integrally suppressed Ruger pistol we have been manufacturing for 20 years. Unmatched sound reduction as tested by the US Army using 40Gr CCI Minimag ammo. The professional model Ruger MkIV is available in 7.1-inch and 7.8-inch tube lengths as measured from the front of the grip frame. 110-116 db absolute sound signature depending on ammo. Cycles most ammos including many subsonic and std vel .22LR ammos. www.srtarms.com

ALEXANDER ARMS
Tactical Series/.17 HMR and .50 Beowulf Tactical Models

Our Tactical Series is available in the following calibers: .50 Beowulf, 6.5 Grendel, .17 HMR, 5.56 NATO or 300 AAC Blackout. The series features a flat-top receiver, low-profile gas block, Manticore Arms Transformer Rail handguard, B5 Systems SOPMOD BRAVO Collapsible Stock and an upgraded trigger (choice of Geissele SSA or Alexander Arms Tactical Trigger). Comes in Flat Dark Earth (FDE), OD Green or Black. Standard-specification lower receiver assembly with our name, logo and caliber engraved. Ships in an Alexander Arms soft carry bag with one 7-round magazine and six Manticore panels (2 sets of 3). www.alexanderarms.com

JP ENTERPRISES
.224 Valkyrie Barrels

JP Enterprises is proud to announce pricing and shipping details for their adoption of Federal’s new long-range cartridge, the .224 Valkyrie. In addition to their EnhancedBolt assembly for 6.8 SPC II / .224 Valkyrie, JP will be releasing three new Supermatch barrel contours to support this new caliber:

20in 1:7 light-weight contour
20in 1:7 medium-weight contour
22in 1:7 medium-weight contour

JP is confident that this variety will provide options for hunters and long-range competition shooters excited about the .224 Valkyrie. As with JP’s other barrels, each of these new Supermatch offerings will be available not only in complete rifles and upper assemblies, but also as component barrels and complete barrel kits (including choice of gas system and muzzle device pre-installed). Both of these component barrel options will also include an individual head-spaced EnhancedBolt assembly for optimum performance. www.jprifles.com

DRD TACTICAL
Paratus P762 Gen-2 in 6.5 Creedmoor

Paratus Gen-2 is a patented quick take down semi-automatic rifle chambered in 7.62 NATO or 6.5 Creedmoor. The rifle can be assembled in less than 60 seconds without the use of any tools. It is the most compact auto-loading rifle in the world, with features like folding Magpul adjustable stock. The patented internal recoil system eliminates standard buffer tube/spring which allows the rifle to be fired with the stock folded. The rifle comes with hard case with high density custom cut foam. drdtactical.com

STREAMLIGHT
Dualie Magnet Flashlight

The Dualie Rechargeable Magnet Flashlight is a lithium ion battery-powered rechargeable LED flashlight that is safety-rated for use in Division 1 environments. The new dual-function light features both a forward-facing spot beam and side-facing flood light for use individually or simultaneously for optimizing navigation and eliminating blind spots. The Dualie Rechargeable Magnet Flashlight features opposing switches for easy, one-handed beam operation. It includes an integrated, non-protruding, spring-loaded belt clip that conforms to the light’s body, while easily grabbing onto shirts, pockets and other gear for hands-free use. Two integrated magnets, one on the top of the clip and the other on its tail end, provide easy attachment to metal surfaces for hands-free lighting.

Run times for the Dualie Rechargeable Magnet Flashlight are 7.25 hours for spot mode, 13.5 hours for flood mode and 5.5 hours when the beams are combined. streamlight.com

A*B ARMS
The Power to the People Program

As a champion of the 2nd Amendment, American Built Arms Company wants every American to have the opportunity to build his or her own “Made in the USA” bolt-action rifle. The Power to the People Program combines two outstanding firearms products—the A*B Arms MOD*X GEN III Modular Rifle System and the Remington Model 700 SPS Tactical AAC-SD Barreled Action. Both products are shipped together to the consumer’s local FFL Dealer for pickup. Once in the buyer’s hands, assembly takes about 15 minutes. www.abarms.com

OTIS
Mission Critical MC-10 High Performance Cleaner & Lubricant

Otis’ Mission Critical MC-10 High Performance Lubricant ensures ultimate performance for firearms. It withstands extreme conditions and will not freeze, burn or carbonize. MC-10 is recommended for use on any metal-on-metal contact points, such as slides, slide rails, bolt/bolt carriers and actions. It also has protectant qualities.

Safe on all gun metals and finishes, the Mission Critical MC-10 Cleaner prepares the surface for the MC-10 Lubricant and removes oils and contaminants. In addition, it is formulated specifically to remove the lubricant, if desired and is the only surface cleaner that will do so. otistec.com

STREAMLIGHT
Enduro Pro Headlamp

Streamlight has launched the Enduro Pro, a versatile, low-profile headlamp with a sleek design for outdoor enthusiasts, industrial professionals and consumers alike. The new light offers three lighting modes to cover a variety of tasks, including: spot LEDs for focused, task lighting; flood beams for soft, area illumination; and red LEDs to preserve night vision.

The compact headlamp uses three AAA alkaline or lithium batteries, which can be easily replaced by opening the light’s rear cover, eliminating the need for tools, and has a 45-degree tilting head for ultimate ease-of-use and flexibility. It uses two power LEDs and two Red LEDs for a total of eight output modes, three each for spot and flood and two for night vision. The headlamp features a case constructed from tough polycarbonate thermoplastic material with elastomer over mold and unbreakable polycarbonate lenses. The light is IPX4-rated for water-resistant operation and tested to two meters for impact resistance. streamlight.com

BLACK RAIN ORDNANCE
Black Rain Tactical Range Bag

This premium tactical range bag secures your rifle with padding and durable Velcro straps. Available in 38 inches or 46 inches, the bag has three large removable moly attachments for extra storage and stores your rifle securely, even when you’re on the move. A courtesy Black Rain patch is included. blackrainordnance.com

ATN X-SIGHT II HD 5-20X

The first digital scope to break the true HD barrier! Gone are the grainy black and white images—the X-Sight II takes digital imaging to a whole new level. Crystal clear images and millions of colors will have you forgetting that you are looking through a digital scope. Immerse yourself in an advanced cockpit like experience. Take advantage of the suite of sensors and advanced processing power for an entirely new shooting experience.

Share the fun with your friends and family with HD video and photos that you can take day or night. No more forgetting to record those “perfect shots” with ATN’s RAV (Recoil Activated Video) feature that automatically records videos before and after you pull the trigger.

X-Sight II—the most powerful shooting solution on the market that will not break the bank.

POF-USA REVOLUTION (7.62 NATO)

Brand new from POF-USA is a .308 battle rifle that handles like a 5.56, because it’s the same size and weight as one. This isn’t a stripped down rifle that’s saving weight by making extra cuts or lacking the battle rifle features you’re accustomed to. The Revolution actually uses many 5.56 AR parts which allows for a shorter overall receiver size and reduced weight. The Revolution receiver size, from pin to pin, shares the same dimensions as an AR-15.

This is NOT a small frame .308, it’s smaller! The Revolution features many 5.56 parts; such as charging handle, bolt carrier, roller cam pin, buffer, heat-sink barrel nut, handguard and 5-position gas piston operating system. The barrel extension, bolt assembly, upper and lower receiver are the exact same size as those on an AR15. This is truly an AR15 that shoots in .308!

Weighing in at 7.3 lbs the Revolution features POF-USA’s new Edge Handguard with four built-in QD mounts. It’s loaded with features such as a fully ambidextrous billet receiver set, NP3 coated bolt carrier group, 5-position adjustable gas piston, single stage match grade trigger and more. You may have just found your “one gun.” MSRP: $2669.99.

ACCURACY SOLUTIONS BIPODEXt

With BipodeXt you will have a rifle shooting experience unlike anything before. This revolutionary new product provides shooters with unmatched stability and accuracy.

To understand the principles behind the design of BipodeXt it helps to visualize a rifle as a lever and its bipod as the fulcrum on which the lever rests. While BipodeXt is not utilized to lift weights an analogy from the lever/fulcrum axiom can still be drawn. As for the lever, the closer the fulcrum is to either end of the lever, the more leverage the user obtains. As for BipodeXt, the further out the bipod is placed the more stable the sighting down the rifle’s scope becomes.

Some BipodeXt models, such as the BXT 40X3, provide for a bipod’s resting point to be placed beyond the muzzle of most rifles, thus further minimizing movement through the rifle and impressively reducing reticle drift. BipodeXt can be extended and retracted giving the shooter a highly adjustable and customizable resting point. Due to its round design BipodeXt can quickly correct canting by simply operating its clamp’s lever. This also allows for an unprecedented 360 degrees rotation of the bipod in relation to the rifle. Most models weigh approximately 1lb.

HOGUE INC. ANNOUNCES LASER ENHANCED GRIPS FOR SMITH & WESSON K/L AND J FRAME REVOLVERS

Hogue Laser-Enhanced Grips

Hogue, Inc. is proud to announce the newest additions to their growing line of Laser-Enhanced (LE) Grips. Revolver grips for Smith & Wesson’s round butt K/L and J Frames are now in stock. “For years our customers have been asking for Hogue Grips with lasers,” said LE Grip designer and managing partner Jim Bruhns. “We have expanded our line of Hogue LE Grips to include models for Smith & Wesson K, L and J Frame owners in direct response to customer demand.”

Hogue’s LE Grips are the first handgun laser sighting system on the market based on a fully programmable, digitally controlled microprocessor circuit. Hogue’s designers capitalized on the advantage by programming three operating modes (steady, flashing or stealth target) and four laser brightness levels into the LE Grip’s circuit. They also tapped into sophisticated power management routines to ensure long life from two common CR- 2032 batteries hidden under the grip on the non-laser side–an important design feature enabling battery changes that won’t take the laser out of zero. Each LE Grip is bore-sighted at the factory while fine windage and elevation adjustments are accessible via small set screws. All of the Hogue LE Grip’s programming features are accessible via pressure-sensitive programming buttons.

The Hogue LE Grips for S&W revolvers are truly unique; the company’s engineers embedded the system’s 630-670nm

Hogue LE Grips are manufactured in their family-owned and operated USA facilities under the direct supervision of the Hogue family.

Hogue HandALL Beavertail Grip Sleeves

The new grip sleeves are designed to fit specific polymer pistols now on the market. “Polymer pistols do not have removable grips that you can simply replace,” said grip designer Matt Hogue. “The solution for many of these pistols is our new HandALL Beavertail Grip Sleeves.”

The Beavertail Grip Sleeve line has been engineered with models for precision fits on specific firearms. The initial offerings in this series have sleeves designed for perfect fits on three sizes of polymer firearms. The first offering precisely fits Smith & Wesson’s M&P 9mm and 40 Shield and Ruger’s LC9. The second sleeve fits Glock’s 42 and 43. The final sleeve is designed for Smith & Wesson’s M&P 45 Shield and Kahr Arms’ P9, P40, CW9 and CW40. While each sleeve has been created for a precise fit on specific polymer framed firearms, they also alternatively fit many other similarly sized firearms with a fully functional and aesthetic fit. “These sleeves also provide a very nice fit for many pistols that may not have any other alternative available on the market,” said Hogue.

The Beavertail Grip Sleeves are installed by slipping them over the frame of the firearm until seated into perfect position. Once installed, the HandALL sleeve provides a single finger groove for instinctive handling of the firearm. The finger groove leads into a gentle palm swell that has been carefully designed to fit naturally in the hand. The beavertail built into the grip sleeve rises high along the back strap of the frame giving full rubber contact with the hand allowing a higher hand-placement on the grip without the fear of the slide biting the skin between the thumb and the trigger finger. In addition to protection and comfort, the beavertail also cushions the hand during recoil.

The HandALL is built from a long-lasting durablethermo plastic elastomer compound. This rubber ages very gracefully and keeps a firm, tacky feel throughout the life of the grip. It will not harden, split or crack with age or usage. The grip sleeve is textured with Hogue’s familiar Cobblestone texture, a series of small circular bumps that provide an efficient non-slip, non-irritating grip on the rubber. Hogue’s HandALL Beavertail Grips Sleeves have an MSRP of $9.95 for black and $10.95 for OD green, flat dark Earth, pink and purple.

Hogue grip sleeves are manufactured in their family-owned and operated facilities under the direct supervision of the Hogue family.

Hogue, Inc. supports local dealers and encourages customers to purchase Hogue products locally. For more information on these products, please call Hogue directly at 1-800-438-4747 or visit www.hogueinc.com to find a Hogue dealer near you.

JP ENTERPRISES

GMR-15

The GMR-15 is a massive redesign of our very popular GMR-13 Glock magazine carbine receiver. This new iteration now incorporates last-round lockback and more competition-ready features such as a flared mag. well and easier-to-use mag. release. Like its predecessor, it also utilizes our proprietary 9mm bolt assembly and Silent Captured spring, making for a highly reliable and accurate carbine. With the GMR-15™ also comes a new dedicated 9mm upper receiver with dual top- and side-charge handles.

The GMR-15 is available for custom rifle or upper assembly builds or in a number of ready-to-ship Ready Rifle configurations. Complete upper and lower receiver kits will be available soon for home builders.

VMOS Bolt Carriers

JP Variable Mass Operating System (VMOS) bolt carriers are designed to work in tandem with our Silent Captured Spring to provide tunable mass regulation to rifles in need of it. Geared especially for suppressed shooting, VMOS carriers overcome the excessive fouling and constant need to adjust gas settings native to suppressed rifles. This is thanks to the configurable, reciprocating masses that ensure consist function and reliable deadblow. VMOS carriers are also ideal for exotic caliber rifles or those without an adjustable gas system.

Steel VMOS carriers are available for both largeand small-frame rifles. An aluminum large-frame version is also available for high-performance competition builds.

Microfit Takedown Pins

Since the release of our original JP Tension Pin almost 20 years ago, sloppy receiver fit has been a JP obsession. The new Microfit™ Takedown Pins offer are a tool-less solution to this problem with a premium polished appearance. Oversized pins reduce the slop in overly loose receivers that can reduce rifle accuracy. Undersized pins provide easier takedown for tight receivers such as those with heavy Cerakote buildup.

Microfit Takedown Pins are available individually or in standard, oversized, and undersized sets and now come standard in all JP rifles.

Semi-Auto Case Gauges

Even in the same caliber, the ammo requirements between bolt guns and self-loaders are stark. JP Semi-Auto Case Gauges are the first gauges to acknowledge and account for the more particular ammo preferences of the semi-auto platforms. The gauges guaranty function in any self-loading rifle by verifying that every cartridge will fire to a minimumdepth SAAMI chamber. So, if it fits, it shoots.

Semi-Auto Case Gauges are available in .223 and .308 with more caliber offerings coming soon.

.875 Detent Adjustable Gas Blocks (JPGS-10D)

The incomparable level of refinement provided by an adjustable gas system can be undercut by the possibility of gas setting drift. The latest in a long line of JP adjustable gas systems, this new click-adjustable gas block ensures solid retention of gas setting with an easy, reproducible interface. The JPGS-10D model was designed to serve the neglected .875 barrel contour common to Armalite rifles.

Minimized, detent-adjustable JP gas systems are also available in .750 and soon, .936. Locking set screw version is also available in a variety of profiles.

WALTHER

PPS M2

The PPS M2 is the latest upgrade to a classic design from Walther. Though it’s hard to beat the original, the M2 features everything you asked for in the classic PPS. Walther signature ergonomics, button style magazine release and front slide serrations. Built with the concealed carry shooter in mind, the Walther PPS M2 represents everything the American market has asked for. The MSRP is $449.

Species: Semi-automatic
Caliber(s): 9mm
Overall Length: Standard Model 6.3”
Barrel Lengths Available: 3.18”
Weight, Standard Model, empty magazine, no optic or bipod: 21.1 oz

Creed

Superior ergonomics and excellence in trigger design. The Creed offers a reinforced polymer frame with signature ergonomics that shooters have come to expect from Walther. The Creed features a pre-cocked, double-action trigger system and a bobbed hammer that ensure a no-snag draw from a concealment. This system provides the shooter with a light and smooth, consistent trigger pull. It includes ambidextrous magazine release, low profile steel 3-dot sights and two magazines.

Species: Semi-automatic
Caliber(s): 9mm
Overall Length: Standard Model 7.3”
Barrel Lengths Available: 4”
Weight, Standard Model, empty magazine, no optic or bipod: 26.6 oz

TEAM WENDY

TEAM WENDY’S TRANSIT PACK BY MYSTERY RANCH

Team Wendy is pleased to announce the release of the Team Wendy Transit Pack. A collaborative effort between Team Wendy and Mystery Ranch, the pack’s innovative design offers the user multiple ways to transport the bag as well as organize its contents. The Transit Pack is available through TeamWendy.com and authorized Team Wendy dealers.

Transit Pack Features:
• Durable design with padding on all sides to protect helmet
• Offers three ways to carry your bag: shoulder straps, bag handle on top and side for hand-carry(can also be used to secure to vehicle) and MOLLE on back of bag that can be attached to MOLLE panels on packs or elsewhere
• Clamshell opening gives access to the entire contents and creates two useable surfaces for kit layout
• Interior flap has Velcro for spare patches and loop-mounted accessories
• Three moveable internal pockets that can be placed anywhere in the bag
• Two flat pockets for accessory items such as strobes, goggles, glasses, etc.
• One draw cord bag for NVGs or headset, stored under the helmet.

For more information see Learn more about the Team Wendy Transit Pack by Mystery Ranch.

NIKON

NIKON DEBUTS BLACK RIFLESCOPE SERIES

Nikon doubles down on its commitment to American shooters with the introduction of the new BLACK riflescope series—a new category of dedicated optics with models engineered for both precision longrange rifle and action-shooting AR enthusiasts.

For the precision rifle shooter, Nikon’s BLACK X1000 is offered in a range of 4-16×50 and 6-24×50 models with X-MRAD or X-MOA tactical style reticles synchronized to elevated windage and elevation turrets. Accurate and repeatable, the adjustments enable precise dialing of elevation come ups and wind compensation, while each of the new reticle designs present the shooter with a visually clean, yet highly functional and advanced tool for estimating range or maintaining holdovers.

Shooters looking for rapid-action targeting capability with AR/MSR platforms can rely on the new BLACK FORCE1000 1-4×24 riflescope with capped turrets and SpeedForce reticle. When the riflescope is dialed down to its true 1x magnification, the reticle’s illuminated double horseshoe center portion serves as quick reference for reaction-speed target acquisition and engagement, as well as for establishing moving target leads. The SpeedForce MOA reticle also integrates BDC circles and hash marks for precise intermediate-range target holdovers.

I noted how much heavier the receiver seemed than a standard A2 lower from Colt or Bushmaster, and how clean and sharp the markings and lines of the receiver were, especially the edges, which are all beveled and sculpted. On the left side of the receiver was a large “diamond” logo and the serial number, on the right side was the manufacturer markings, model designation, and caliber designation.

All the machining and engraving was done on a 5-axis CNC mill, Not only does that ensure that there are no hidden fractures from roll stamping, but it also ensures that all the sides are machined fully parallel to the other, there are no off center or angled surfaces that are not designed that way.

I also noted other features that were rather unusual: 1: All the takedown pin areas were highly reinforced. 2:The rear of the receiver contains a recessed jackscrew that will press against the upper receivers rear lug, and is used to take the wobble or slack out of the upper/lower receiver fit. 3:The receiver sides are easily twice as thick as a standard A2 lower receiver is. This thickness means more stiffness to resist twist or deformation. 4:The lower contains adjustment screws for both trigger reset and trigger stop, accessible through the trigger-guard, which is a solid piece of the lower receiver. 5: The magazine release area is heavily fenced in. 6: All the detent holes seemed to be tapped, except for the one at the front takedown pin. 7: The magazine well has no “taper”, but is instead parallel to the top of the receiver. 8: Fire control markings are on both sides of the receiver in large, easily readable engraved letters: “FIRE” and “SAFE” 9: Included with the receiver was a short list of instructions, some grub screws for the capture pin areas, and a short Inconell pin for the bolt hold-open.

Since I hadn’t really expected the delivery of the receiver so soon, I was caught empty handed: no lower receiver parts kit! Ernie had said that this would take current mil-spec “small pin” fire-control parts, I made a quick order to Bushmaster Firearms for a lower completion kit. When the kit arrived several days later, I sat down at the workbench and got busy installing.

True to claims, the semi-auto fire control parts fit into the lower receiver with no problem whatsoever. A longer pin for the hammer would be nice for aesthetic reasons; the receiver is thick, and the pin is inset a tiny bit on both sides. The bolt hold-open was also tapped, which meant that no punches were needed, and no rollpin to install. Just insert the bolt hold-open assembly, insert the pin, and tighten the screw down (too easy).

The rear takedown pin detent hole was also tapped, and the instructions said that the spring must be shortened to accommodate the capture screw. I took off several coils until I had a good pressure fit, and tightened that screw down. No more lost or bent up springs when switching butt-stocks! Anybody that has switched a stock out has chased these things around… INCOMING!!

After I had fully assembled the lower with a Choate “Hook Style” butt-stock and a standard A2 pistolgrip, I started looking at the instructions for the trigger adjustment. Now, adjustable match triggers are a bit pricey, as we all know, but this lower has the feature built right in, just use your standard trigger. The adjustment consists of a pair of screws that are in the bottom of the receiver. These screws can be tightened or loosened to press against the front and rear of the bottom of the trigger to adjust the length of creep, and the trigger reset distance. The instructions give some rather pointed cautions about adjusting the trigger properly. Adjusted too closely, the shooter may experience some “hammer follow” or “doubling” due to improper adjustment, basically , the disconnector could be interfered with. I personally adjusted mine to what felt like a standard AR pull and release, leaving final adjustments to the trigger for a trip to the range.

Now, since this is a post-ban receiver, none of the other current uppers that I own would’ve been legal for installation since they are in pre-ban configuration, so out come the parts boxes (and the credit card for more parts orders!)

I ordered and received a DPMS™ “Hi-Rise” upper from Tom Liemohn (Total Silence MFG, in WA.) This one I chose as a fitting complement, as the upper is very thick and rigid, and includes the proper height riser built in for mounting a telescopic sight.

In addition, this upper is “slickside”, it has no forward assist or brass deflector, which is no problem for me, since I’m a right handed shooter, and adds to the clean lines of the rifle.

Also for the upper, I purchased an aluminum free-float handguard, a JP Enterprises adjustable gas-block, and a JP Enterprises single chamber “Recoil Eliminator” brake. The brake is blind pinned and welded to permanently cover the threads on the barrel, making the rifle comply with the ’94 AW ban. All of this was wrapped around a 1/7 twist Colt™ heavy barrel that was a takeoff from another rifle. I topped the whole thing off with glass from Springfield Armory, a 4-14×40 Tactical Government Model™ with the 5.56 range-finding reticle.

After I assembled the upper fully, I mounted it to the lower, expecting some fitting issues due to the different manufacturers. There were no tightness problems, the takedown pins lined up properly and required no undue force to insert. There was a very slight bit of play between the upper and the lower receivers, and here’s where the upper/lower fit screw comes in handy. Since uppers and lowers from the same manufacturer can sometimes fit poorly, one common recourse to this problem is the “Accuwedge”, the little rubber plug that went under the rear lug of the upper receiver to eliminate play. With this lower, you close the receiver halves, insert the pin, and start tightening the adjustment screw that is found at the rear of the receiver, above the pistolgrip. The interior end of this screw is flat, and pushes against the rear edge of the upper receivers mounting lug, forcing it tight against the takedown pin, completely eliminating ALL upper receiver play, and the associated rattle and instability.

Now it was time for a trip to the range! The first thing here was to set the JP gas block system for best functioning, this was easily accomplished, and only required a couple of shots. After that, I started fooling with the trigger adjustments. This was also easy, as the adjustment screws are accessible through the bottom of the trigger guard, no need to open the upper to adjust from the top. After several adjustments, I deliberately tried to “over adjust” the trigger to cause a malfunction. In the one extreme I got hammer follow, no doubling at all. In another case, I over adjusted the other way, and could not fire the rifle. At optimum, I currently have the trigger set to about 1/4” of creep before let-off. In rapid-fire, this lets you achieve a rather easy and startlingly fast rate of fire.

The only difficulty I noticed was that some mil-spec magazines seemed a bit tight in the lower, and were a little difficult to insert or remove from the magazine well, and would not eject fully on their own. On speaking to Ernie about this, he had also seen this, and has corrected this in all further runs of this receiver. He had kept the magwell measurement on the conservative side, and it seems some G.I. magazines have size variances in spec within government contract limits. I have noted this in my Eagle Arms manufactured rifle also, some magazines are just a little bit tighter than others.

All in all, I feel that this receiver offers the best deal out there as a base for either competition, casual target shooting, varmint hunting, or a great foundation for a post-sample M/16 in heavy pistol calibers that would normally batter a receiver.

One interesting thing is that the “DIAMOND SERIES” receiver rifle REALLY GETS ATTENTION!!!! While at the range I was asked many times “What kind of rifle is that?”…”Who makes that rifle?”…. and from one guy who drove a hot-rodded Chevy Nomad…”Is that a BILLET rifle? Cooool!” So the rifle does not only FILL the looks department, but also the quality department. As an added note, on my personal receiver, I filled all the lettering on my receiver with white paint, to accent the markings. It sure stands out nicely!

So, how much will this lower cost? Not as much as you may think! Retail cost for the first run orders is $295, and the price will increase to $350 for any subsequent run of receivers, and dealer pricing is available. Quite a deal since you figure that the average postban A-2 lower is about $110-200 without any of the other features. Also, the receivers are available in black, green, blue, red, gold, and silver anodizing. Silver or Black is the standard offering, the other colors are available for a $25 extra fee. The Diamond lower receiver is also available in Post-Dealer Sample M/16 configuration for a $25 extra fee. Matching billet upper receivers are “in the planning stage”, and entire assembled rifles are also offered.

For more information on the” DIAMOND SERIES BR-15” receivers and rifles, contact:

Socom MFG
Dept SAR
616 ATOMIC RD
N. AUGUSTA, S.C. 29841
PH: 803-442-9206
http://www.socommfg.com

AR-15™ is registered trademark of Colt’s Manufacturing Company, Inc.

Diamond BR-15™ is a registered trademark of Socom Manufacturing, ©2000

DPMS is a registered trademark of Defense Procurement Manufacturing Services, Inc

4-14×40 Tactical Government Model™ copyright© 1997 Springfield, Inc.

Bushmaster™ is a registered trademark of Bushmaster Firearms, Inc. / Quality Parts Co

Accuwedge™ is a registered trademark.

Defense Procurement
Manufacturing Services, Inc.
13983 Industry Avenue
Becker, MN 55308
Phone (612) 261-5600
Fax (612) 261-5599

Colt’s Manufacturing Company, Inc.
P.O. Box 1868
Hartford, CT 06144-1868
Tel: (860) 236-6311
Fax: (860) 244-1442

JP ENTERPRISES, INC.
P.O. Box 378
Hugo, MN 55110
Voice: 651-426-9196
Fax: 651-426-2472

Springfield Armory
420 W. Main St.
Geneseo, IL 61254
309-944-5631
309-944-3676 fax
sales@springfield-armory.com

Bushmaster Firearms, Inc
P.O. Box 1479
Windham, ME 04062
Orders: 1-800-998-SWAT