LIBERTY SUPPRESSORS

Whitetail Integral Bolt Rifle

We developed the Whitetail for the hunter in mind specifically. Most silencer designs either are centered on the casual shooter or the tactical community, but none really addresses the needs of the American hunter directly. Liberty Suppressors’ silencer is built with a grade 9 Titanium tube and an aircraft aluminum rear support to reduce weight of the assembly. The blast diffuser and the core are both made from stainless steel for durability due to the blast energy impingement that they are subjected to during use. The core is retained by means of a standard “off the shelf” 3/8-inch drive ratchet with a special profile milled in the front of the core, preventing the need for special tools for disassembly during routine maintenance. The overall length of the package is designed to mimic an unsuppressed hunting rifle as closely as possible. We also virtually matched the weight of the original unsuppressed rifle, by keeping the weight down in the suppressor module. This creates a package that is light, quiet and durable for the hunter in the field.

• MODEL : Whitetail 
• CALIBER: 6.5mm (6.5 Creedmoor) 
• LENGTH :13.5in 
• DIAMETER: 1.375in 
• WEIGHT: 6.5lbs 
• FACTORY TESTED SOUND REDUCTION: N/A 
• MATERIALS: Titanium/Aluminum/Stainless steel 
• FINISH: Graphite Black Cerakote 
• MSRP(USD): $999
• libertycans.net

LIBERTY SUPPRESSORS

Zulu Integral AR-15 Upper

The Zulu is a balance between suppression, accuracy, backpressure and balance. This integral is designed to mitigate the excessive back pressures generated by the typical AR-15 platform, and the suppressor’s flow-for-ward design gets the gas away from the shooter better than many other 556 suppressors on the market.

• MODEL: Zulu 
• CALIBER: .223 Wylde 
• LENGTH: 16.6in 
• DIAMETER: 1.625in 
• WEIGHT: Stripped upper–3.7lbs 
• FACTORY TESTED SOUND REDUCTION: N/A 
• MATERIALS: Titanium/ Inconel / Stainless steel 
• FINISH: Graphite Black Cerakote 
• MSRP(USD): $1550
• libertycans.net

B&T

Mounted Machine Gun Suppressor

The B&T Mounted Machine Gun Suppressor offers various advantages to the user. Besides the obvious purpose of reducing the sound of the gun more than 14dB, which makes command and communication easier, reduction of the muzzle flash is of paramount importance. As the muzzle flash gives away the position of the gun immediately, its reduction greatly adds to the safety of the shooter as its position is less visible, especially in the hours of twilight or darkness.
As opposed to other designs made by B&T, this suppressor is designed for use with mounted weapons; the weight of the suppressor, therefore, was not of a primary importance. B&T produces other suppressors which are lighter and better suited for dismounted use.

• MODEL: Mounted Machine Gun Suppressor 
• CALIBER: 5.56mm (.223) / 7.62mm (.308) 
• LENGTH:190mm (155mm extending gun) 
• DIAMETER: 48mm 
• WEIGHT: 1.0kg 
• FACTORY-TESTED SOUND REDUCTION: ca. 14dB 
• MATERIALS: Inconel / Thermax 
• FINISH: Sandblasted / Grey 
• MSRP (USD): $ TBA 
• bt-ag.ch

GEMTECH

Lunar 45

The GEMTECH Lunar 45 is the solution for shooters suppressing a variety of platforms and pistol calibers. Constructed from military grade aluminum and titanium, the Lunar 45 offers durability and strength without excess weight. This modular design is hearing safe in both configurations, and supported by a wide range of mounting accessories.

• MODEL: Lunar 45 
• CALIBER: 45 Auto 
• LENGTH: 8in Long, 6.9in Short 
• DIAMETER: 1.375in 
• WEIGHT:12.3oz Long, 10.9oz Short 
• FACTORY-TESTED SOUND REDUCTION: N/A 
• MATERIALS: 6AL4V Titanium, 7075 Aluminum 
• FINISH: Matte Black Type III Hard Coat Anodize 
• MSRP (USD): $799 
• gemtech.com

GEMTECH

ONE

The GEMTECH ONE is the solution for shooters seeking maximum versatility and durability. Constructed from Inconel and titanium, the ONE offers unwavering performance on short-bar-reled 5.56 through 300WM rifles. Featuring an interchangeable thread mount/ Quickmount™ system the ONE can be mounted to a vast range of rifle platforms and calibers.

• MODEL: ONE
• CALIBER: 300 WIN MAG 
• LENGTH: 7.8in 
• DIAMETER: 1.625in 
• WEIGHT: 17.4oz 
• FACTORY-TESTED SOUND REDUCTION: N/A 
• MATERIALS: Inconel 718, 6AL4V Titanium 
• FINISH: Matte Black High-Temp Cerakote® 
• MSRP (USD): $1,099
• gemtech.com

DANIEL DEFENSE

DD WAVE

The DD WAVE sound suppressor’s cascading baffle geometry more effectively attenuates sound than simpler baffle styles. A unique one-piece, 3D-printed baffle and tube eliminate the need for welds—typically the weakest points of a traditional suppressor. Constructed of nickel-based superalloy, stainless steel and Titanium—and then Cera-kote-coated—the DD WAVE is fiercely strong yet lightweight, making it durable and reliable for full-auto use. danieldefense.com

• MODEL: DD WAVE 
• CALIBER(S): .17 HMR to .300 Win Mag 
• LENGTH: 7.6in 
• DIAMETER: 1.5in 
• WEIGHT: 17.2oz 
• FACTORY-TESTED SOUND REDUCTION: N/A 
• MATERIALS: Nickel-based superalloy, stainless steel and Titanium construction for durability 
• FINISH: Cerakote 
• MSRP (USD): $850 for the QD/$799 for DT 
• danieldefense.com

SILENT LEGION SUPPRESSORS

7.62×39 Quick Detach SL-AK

The Silent Legion SL-AK is your answer for a high-performance suppression system for 7.62x39mm platforms such as the AK-47. It comes standard with the Bi-Lock Quick Detach mounting system, as well as the two Bi-Lock QD flash hiders that cover the most common thread pitches on AK firearms.

• MODEL: SL-AK 
• CALIBER: 7.62mm
• LENGTH: 7.75in
• DIAMETER: 1.50in
• WEIGHT: 17oz
• FACTORY-TESTED SOUND REDUCTION: 32dB
• MATERIALS: Titanium
• FINISH: High Temperature Cerakote
• MSRP (USD): $989
• silentlegion.com

SILENT LEGION SUPPRESSORS

.450 Bushmaster .458 SOCOM

Designed with the straight-wall cartridge hunter in mind, the durable .450 Bushmaster.458 SOCOM suppressor is the perfect thing to harness the energy of this heavy hitting round and tame the noise as well as the recoil. Direct Thread comes with Suppressor Retention System.

• MODEL: SL-BM 
• CALIBER: .450 Bushmaster/.458 SOCOM 
• LENGTH: 8.75in 
• DIAMETER: 1.50in 
• WEIGHT: 18oz 
• FACTORY-TESTED SOUND REDUCTION: 30dB 
• MATERIALS: Titanium 
• FINISH: Cerakote 
• MSRP (USD): $1,048 
• silentlegion.com

FREEDOM ARMORY

Dragoon 7.62 CQB

The Dragoon 7.62 CQB suppressor is machined from solid Titanium bar stock creating an extremely durable, lightweight suppressor without welds or failure points. It’s serviceable down to the piece parts and provides top-rated sound reduction across the entire caliber range. See the Dragoon’s proprietary 2-second Titanium quick-detach mount!

• MODEL: DRAGOON CQB 
• CALIBER: 7.62 
• LENGTH: 7.5in 
• DIAMETER: 1.375in 
• WEIGHT: 11oz 
• FACTORY-TESTED SOUND REDUCTION: 138dB at muzzle | 132dB at ear 
• MATERIALS: Titanium 
• FINISH: Cerakote 
• MSRP (USD): $1095 
• tioninc.com

ELITE IRON

STFU LITE

The STFU LITE was designed for hunting and light-use applications. The Titanium construction makes this suppressor light and easy to shoot out in the field. Designed to be used on .30 / 06 or smaller cartridges.

• MODEL: STFU LITE 
• CALIBER: .308, .30/06 
• LENGTH: 7.875in 
• DIAMETER: 1.625in 
• WEIGHT: 15oz 
• FACTORY-TESTED SOUND REDUCTION: 27.5dB 
• MATERIALS: Tube: Grade 9 Titanium Internals: Grade 5 Titanium 
• FINISH: Black Cerakote 
• MSRP (USD): $1095
• EliteIron.com

ELITE IRON

DELTA LITE 

he DELTA has been very popular. In response to this, we have created the DELTA LITE similar performance in a lighter package. The DELTA LITE suppressor is available in a variety of different popular calibers; it is a favorite among varmint hunters. This suppressor is suitable for both bolt-action and semiauto rifles.

• MODEL: DELTA LITE 
• CALIBER: .223, 22-250, .243 or 6.5 
• LENGTH: 7.5in 
• DIAMETER: 1.5in 
• WEIGHT: 12oz 
• FACTORY-TESTED SOUND REDUCTION: 34dB 
• MATERIALS: Tube: Grade 9 Titanium Internals: Grade 5 Titanium 
• FINISH: Black Cerakote 
• MSRP (USD): $950 
• EliteIron.com

Ruger Silent-SR Series Suppressors

Sturm, Ruger & Co., Inc. is the quintessential example of American capitalism at its best. The company was founded with a meager $50,000 investment by William B. Ruger and Alexander M. Sturm in a small, rented machine shop in Southport, Connecticut in 1949 for the purpose of manufacturing firearms. At that time, there were serious doubts within the industry with insider experts saying that “it can’t be done,” and that the entire industry was in decline. It was assumed that the large established name gun makers would continue to dominate the market.

What the industry didn’t count on was that this new company was guided by a number of innovative concepts, not the least of which was William B. Ruger’s desire to build each product “to a standard so that I would want one even if it was made by our competitors.” These basic principles of innovation, quality and value have earned the company the position of pre-eminence in the firearms industry over the past 68 years. Ruger, which is one of only two firearms manufacturers traded on the New York Stock Exchange, produces millions of firearms each year for hunting, target shooting, collecting, self-defense, law enforcement and government agencies.

Ruger’s first product was the Ruger Standard pistol in .22LR. With some design innovations inspired by the Japanese Nambu and cosmetics/ergonomics of the German Luger, it became wildly popular—it was comfortable to hold and shoot. A retail price in the 1950s of $37.50 (representing fewer than 40 hours minimum wage effort), decent accuracy and good reliability were winning factors. Designed with manufacturing economy in the forefront, it had a 4.75-inch barrel and fixed sights. Many a bullseye match shooter had one in the bottom of his bag to permit finishing a match when his finely tuned target gun malfunctioned. It was also found tossed in the bottom of fishermen’s tackle boxes. Its popularity (and that of the 10 /22 rifle) started an ever growing industry of accessory makers.

Ruger is no stranger to the National Firearms Act weapons, having developed and built several machine guns. In the late 1980s Ruger purchased the rights to the UZI and what became the MP9 from Uziel Gal, its designer. In 1995, Ruger introduced its MP9 9mm submachine gun. Although recognized as an improved UZI, the weapon never became popular or even well known. Bill Ruger held the belief that civilians should not have access to machine guns and established the company policy that no Ruger machine guns would ever be sold to civilians, including Class 3 firearms dealers. The market was to be domestic law enforcement and international military. However, noted in the company’s law enforcement catalog, marketing to law enforcement requires personal demonstrations by local Class 3 firearm dealers. The MP9 was discontinued in 1996. Ruger’s other venture into the machine gun market was a variant of their 1973 Mini-14, the AC-556, which looked exactly like the Mini-14 but had a selector switch (semi, burst, full-auto) at the receiver right rear. The standard AC-556 was offered in both blued and stainless versions as well as a shorter weapon with a folding stock and 13-inch barrel (AC-556K or AC-556F) in blue or stainless. With marginal sales (although far better than the MP9), production was discontinued in 1999 and support terminated 10 years later. Until William B. Ruger’s death in 2002, no Ruger machine guns were sold to civilians. The civilian marketplace was through sale of police trade-ins.

Part of Ruger’s success has been through good market research, outstanding engineering and production of innovative products without significant bureaucratic impediments to slow down development. Part has been financing through reinvestment of profits rather than using traditional debt structure. And part has been by doing manufacturing in-house. Ruger’s Pinetree Casting (Nashua, NH) is one of the foremost investment casting facilities, and in addition to many Ruger weapon receivers, does casting for golf clubs. In 2014, the company purchased Megamet Solid Metals Inc., based in St. Louis, Missouri, to add metal injection molding (MIM) casting capability not only for increased production capacity, but to markedly reduce development time for new products. Unlike many of its competitors, Ruger has not acquired related companies, either competitors or accessory makers.

The use of silencers has become mainstream over the past 4 to 5 years, a fact not overlooked by Ruger. Although their 10 /22 rifles sold in the international market were routinely threaded 1 / 2-20 for European rimfire silencers, it wasn’t until several years ago that domestic Ruger .22 rifles and pistols came threaded 1 /2-28 for the US market. Ruger looked at possible acquisition of a silencer company but after due diligence decided to start building suppressors in-house at their New Hampshire facility.

Approximately a year ago, Ruger introduced two sound suppressors designed for rimfire cartridges: the “Silent-SR” thread mounting muzzle suppressor and the “Silent-SR ISB” integrally suppressed barrel for their take-down 10 /22 rifle.

Both suppressors are attractively packaged in boxes with a fitted foam insert. Any necessary tools are included: a cast composite spanner wrench for removing the endcaps of the Silent-SR and a hex wrench for disassembling the integral Silent-SR ISB. All suppressors are supplied with a 12-page, well written and profusely illustrated manual that covers legal and safety aspects, specifications, attachment to the host weapon, use, disassembly and cleaning instructions. Disassembly for cleaning is simple, and it is virtually impossible to reassemble incorrectly. Both are finished in black Cerakote.

Testing Protocols

The first question posed by most users relates to sound performance since that is the stated goal of a sound suppressor. There are a number of ways to evaluate sound levels, starting perhaps with Mitch WerBell of Sionics fame in the 1970s where he lined up the office staff and shot two different suppressors behind their backs asking which was quieter. While this has merit in distinguishing suppressed from non-suppressed weapons, subtle differences are distorted by the individual hearing damage of different observers.

A more objective method is to use sound measuring equipment that meets the requirements of MIL-STD-1474D. Not all sound meters are capable of accurately measuring the short peaks of firearm sounds, and even some industrial precision meters do not have the necessary peak detector. There are two classic field portable sound meters that meet all the requirements of MIL-STD-1474D: the B&K 2209 and the Larson-Davis 800B with their appropriate ¼-inch pressure microphones. Originally costing in the $5,000 range, both are currently out of production but are frequently available at reasonable cost. Factory service and recertification services are still available. For testing both Ruger suppressors, two of the L-D 800B meters were used, both of which were recertified by Larson-Davis 4 months prior to this test.

MIL-STD calls for a number of measurement locations. For the purposes of the most meaningful and familiar results, sound levels were measured simultaneously at the standard Reference Location (1.6 meters above grass, 1 meter left of the muzzle 90O to bore axis) and at a simulation of the shooter’s left ear (SLE). The Reference Location gives an indication of how the target or down range observer will perceive the gunshot, and the SLE will give one of the better indications as to potential hearing damage. While some advocate using the shooter’s right ear, close contact with a rifle stock confuses weapon action noise with muzzle blast reduction. The simulated SLE positioning of the microphone is 8 centimeters rearward of the back of the receiver (70 centimeters in the case of a handgun) and 18 centimeters left of the bore axis. By measuring both locations simultaneously for each shot, variations in individual rounds are minimized.

For each weapon-suppressor combination, three rounds were fired non-suppressed, and the results averaged. This was followed by a five-round string with the results averaged. It has been found that this number of rounds is statistically significant. For each location, the averages and reduction are noted. In addition, first round pop is calculated by subtracting the average of the last four rounds from the first round. First round pop is caused by a secondary detonation of partially burned powder particles encountering oxygen in the suppressor. MIL-STD permits the use of weighting scales. For a number of years dating back into the 1970s, A-weighting was used. In recent years, a number of manufacturers have changed to C-weighting, which is more accurate for the sound levels encountered with firearms.

Both OSHA and MIL-STD-1474D state that hearing protection is required for short duration peak sound levels greater than 140 dB at the shooter’s ear.

A second item of concern in evaluating a suppressor is whether there is any degradation in accuracy (group size) when the suppressor is mounted. There is often a shift in point of impact which can be corrected by sight adjustment. Rifles were used in a solid rest (Lead Sled) for group size measurements both with and without the suppressor at a range of 40 yards.

For handguns, high speed video was performed looking for excessive yaw or tumbling with the suppressor in place. Frame rate was 5,000 frames/second with a shutter speed of 30 microseconds to provide stop action of the bullet in flight during the first 2 feet of travel. The high-speed camera used was a monochrome Olympus iSpeed FS.

A third concern primarily of military importance is night-time recognition of the shooter’s location from flash or heat signature visualization. Because these suppressors are designed only for rimfire, flash signature was evaluated using high-speed video and only when mounted on the MK-II pistol (generally the worst case scenario).

With either suppressor, it is necessary to utilize standard velocity or subsonic .22LR ammunition to avoid the ballistic crack found with high-velocity ammunition. This crack has been measured with CCI Mini-Mag ammunition at 142 dB 1 meter to the side of the bullet flight path. In the case of .17HMR or .22 Magnum ammunition, the ballistic crack of the supersonic projectile is acceptable, and live targets are confused because the suppressor masks the origin of the shot.

Test Conditions

November 4, 2017, was a bright, sunny fall day in Boise, Idaho. The temperature was a chilly 50F with a relative humidity of 37% and a station pressure of 686 mmHg. Wind gusts were less than 3 miles per hour. The speed of sound calculated to 1,107 feet/second.

The ammunition chosen for testing was CCI Standard Velocity .22LR with the 40 grain bullet. This was chosen because it is commonly available, accurate and remains subsonic in almost any barrel length chambered for .22LR.

The Silent-SR thread-mounting suppressor was tested on two weapons. One was a Ruger MK-2 pistol with a bull barrel shortened to 4.5 inches and mounted in a Ransom Rest. The other was a Ruger 77 /22 with the barrel shortened to 16 inches. The Silent-SR ISB was tested on a Ruger 10 / 22-TD, its normal host weapon.

Silent-SR Thread-Mount Suppressor

The Silent-SR is packaged inside a black ballistic nylon pouch with a convenient belt loop. The suppressor length is 5.4 inches, outside diameter is 1.05 inches, and the weight is 6.4 ounces. It is rated for .22 Magnum and .17HMR in addition to fully automatic .22LR. The length of the threads in the mount is .43 inches, standard for the industry, with a .12-inch thread relief in the mount for safe use with barrels not having a thread relief. The threaded mount is a part of the entrance chamber. There are a total of six baffles (type 17-4 stainless steel), all having a bore aperture of .25 inch. The front end cap functions as a seventh baffle. The rear (blast) baffle is symmetric, and the remaining baffles have significant asymmetry. All baffles have a general conical shape with integral spaces. The tight bore aperture requires barrel threads with a true 90O shoulder for alignment.

Sound measurement levels were obtained on both a Ruger MK-II pistol (4.5-inch barrel) and a Ruger 77 /22?bolt action rifle (16-inch barrel). Both of these weapons are used routinely by the author for rimfire sound measurements. Sound performance was excellent as shown in Table 1 with the absolute sound level at the reference location of 120 dB on the MK-II and 116.7 dB on the 77 /22 rifle.

It is important to remember that there will be day-to-day variations in the sound levels that appear to vary with location, humidity and ambient air temperature. Measurements made in a coastal location do not always correlate with those made in a high desert location such as Boise, Idaho. As a rule, five-round strings are statistically valid (standard deviation <1.5), which is why the tables include the standard deviation for the five suppressed measurements. The one exception was measurement at the reference location where the 8 dB first round pop increased the standard deviation. However, calculating excluding the first round resulted in an average of 118.4 dB and a standard deviation of 1.1, which is in line with all other measurements.

Although what is normally asked is the reduction, the more important measurement is the absolute sound level, both for far field and for hearing risk evaluation. First round pop can be eliminated with either an inert atmosphere (nitrogen, carbon dioxide, etc.) or a tiny amount of oil or grease in the entrance chamber. Absolute sound levels for the rifle are considerably lower than for the pistol, but the degree of reduction is significantly less. This is simply because the non-suppressed level on the rifle is significantly lower than on the pistol.

Accuracy and bullet stability were checked differently on the two weapons. With the Silent-SR mounted on the 77 / 22 bolt action rifle, a target was shot with and without the suppressor at a range of 40 yards. Adding the suppressor moved the point of impact down .176 inches (.421 MOA) but tightened the group from .795 inches (1.9 MOA) to .688 inches (1.64 MOA) with three shots touching. See Target 1.

A check of bullet stability on the MK-II pistol was considered difficult lacking optical sights. Instead, a high-speed video (5,000 frames/second) was performed. Lighting was difficult lacking bright sunlight, so two compromises were accepted: 1) a shutter speed of 30 microseconds (instead of the preferable 2 microseconds and 2) image enhancement (which decreased resolution). Eleven consecutive frames showed the bullet in the first 24 inches forward from the end of the suppressor. These 11 photos were superimposed to show the progress of the bullet traversing this distance as shown in the photo. Starting at the 20-inch region, there is slight yaw, which is normal as the bullet transitions from rotating about its physical center to rotating about its center of gravity. There was no visible flash detected.

The manufacturer’s suggested list price for the Ruger Silent-SR thread mounting suppressor (model 19000) is $449.

Silent-SR ISB for the Takedown 10/ 22-TD

The Silent-SR ISB is a complete replacement barrel with integral suppressor assembly for the Ruger 10 / 22-TD rifle. Unlike similar offerings, the Ruger suppressor includes all hardware and the forend composite handguard. The suppressed barrel is 16.12 inches long, making it .5 inch shorter than the standard barrel, and weighs 41.9 ounces as contrasted to the 30.7 ounces of the standard barrel. The suppressed barrel bears a resemblance to the over/under double-barreled shotgun with a width of .925 inches and height of 1.52 inches. The bore aperture throughout the baffle stack is .280 inch.

The suppressed barrel is alloy steel and 10.62 inches long. The aluminum suppressor outer housing has been permanently attached to this barrel to make the overall length in compliance with BATF regulations. The front end cap and baffle stack are easily removed by loosening the assembly bolt, a process well described in the manual. The blast baffle is symmetric, and the remaining six are significantly asymmetrical. All are type 17-4 stainless steel.

Sound measurements were made using the same host 10 / 22-TD receiver and comparing the original non-suppressed barrel with the Silent-SR ICP integrally suppressed barrel. The results are shown in Table 2. The suppressed barrel measured an impressive 114.7 dB at the reference location, which is only approximately 4 dB louder than the hammer falling on a spent cartridge case.

Accuracy testing was performed in the same manner as for the thread mounting suppressor on the rifle. The range was 40 yards, and the weapon was shot using the Lead Sled rest. A fixed 10x scope was attached to the Weaver base supplied with the rifle. Five shot groups were fired with both the standard and suppressed barrels. The target is shown in Target 2. The suppressed barrel tightened the group from 2.9 inches (6.92 MOA) to 2.05 inches (4.9 MOA) and dropped the group center by .77 inches (1.84 MOA).

The group sizes, both suppressed and non-suppressed, were considerably larger than with the thread-mounted suppressor on the 77 /22. There are several reasons for this, not the least of which is a re-worked 2.5-pound honed trigger on the 77 /22 with no over-travel as compared to a rough 6-pound trigger on the 10 /22-TD with significant over-travel.

The second issue is with barrel lockup on take-down weapons. The 10 / 22-TD tensioning ring has to be adjusted when one barrel is replaced with another. The tension at lockup is not totally consistent, and there is the potential for almost imperceptible flex at the barrel/receiver joint. Even simple removal and replacement of the same barrel can cause a minor point of impact shift. The most accurate way to mount an optic on a take-down rifle is to mount it on the barrel rather than the receiver. In contrast, the 77 /22 barrel is mounted in a far more rigid manner using a V-block and torqued mounting screws.

The manufacturer’s suggested list price for the Ruger 10 /22-TD Silent-SR integral suppressed barrel (model 19001) is $629.

Comments

Both suppressors have their strong points, including excellent sound performance, tightening of the shot groups and obvious quality. The Silent-SR ISB for the 10 /22 Takedown is definitely the more compact weapon due to the requirement for a 16-inch minimum barrel length. What would be a worthwhile improvement to the integral Silent-SR ISB would be to supply a rail contoured to the .920 diameter of the steel portion of the barrel for barrel mounting of an optical sight. The thread mounting Silent-SR has the advantage of a wide variety of weapon platforms and the strength to hold up to multiple rimfire cartridges. While both are outstanding, the author has a bias for thread mounting suppressors because of their versatility.

SureFire LLC
RYDER 9-MP5

The stainless-steel-constructed RYDER 9-MP5 is a duty-use suppressor for the H&K MP5 sub-machine gun. The suppressor attaches to a standard three lug barrel via our patented Fast-Attach mechanism, similar to the way our best-in-class SOCOM Series suppressors attach. The suppressor is easily disassembled for cleaning, and the baffles are indexed and numbered for ease of reassembly. Designed for duty use, the RYDER 9-MP5 does not affect bullet performance or increase point of impact/point of aim as is the case with other sub-machine gun suppressors. When it comes to durability, performance, and ease of maintenance, the RYDER 9-MP5 is the clear choice for suppressing the MP5. www.surefire.com

SF RYDER 9-MP5
Caliber: 9mm
Length: 8in (20.3cm)
Weight: 15.6 oz (442g)
Diameter: 1.30in (3.3cm)
Material: Stainless steel
Finish: Cerakote
MSRP: $849

SRT Arms
SRT Integral M-16 / 9MM Uppers

Integrally suppressed 9MM AR15/M16. Integral suppressed upper, 9MM or .45 ACP., 1.5” OD tube. Pinned and welded 16” bolt face to end of tube, or removable for registered MG or SBR lowers. Ported barrel for additional sound reduction.Porting available to make 115 gr subsonic, or max velocity for use with 147gr subsonic. www.srtarms.com

Weight: Adds 1 lb to upper weight.
4130 tube, 7075 AL baffles and end caps.
Finish: Black Cerakote finish.
Absolute db at muzzle is 116-119 db depending on bullet weight.
MSRP: $780 using customer supplied barrel, handguard and upper receiver.

B&T AG
M.A.R.S. QD

Based on combat experience in Iraq, Afghanistan, B&T has analyzed evolving needs of operators and has evolved its products to perfectly serve the new needs. The new M.A.R.S. QD (Miniature Assault Rifle Suppressor–Quick Detachable) offers greater flash reduction, lighter weight and smaller size. For those who prefer the option to be able to mount/dismount the suppressor even during an operation, the M.A.R.S. QD is the perfect choice. It is the lightest quickest detachable mounting system on the market today. www.bt-ag.ch

Caliber: 5.56mm (.223) or 7.62mm (.308)
Length: 161mm (5.56mm) / 192mm (7.62mm)
Diameter: 39mm
Weight: 415 g (5.56) / 480 g (7.62)
Factory-Tested Sound Reduction: 26 dB (5.56)
Materials Inconel/Thermax Finish: sandblasted/grey
MSRP (USD): tba

B&T AG
M.A.R.S. DM

The M.A.R.S. DM (directly mounted) is the lightest and shortest assault rifle suppressor B&T produces. It´s screwed directly on the muzzle. This lack of any mounting system allows it to be almost 300 grams lighter and 50mm shorter than other suppressors with a mounting system. Therefore the impact on the balance of the weapon and the extension of the gun is negligible and not perceptible in combat. Despite its small size the M.A.R.S. is a full gown up suppressors when it comes to muzzle flash and sound reduction. www.bt-ag.ch

Caliber: 5.56mm (.223) or 7.62mm (.308)
Length: 126mm (5.56mm) / 142mm (7.62mm)
Diameter: 39mm
Weight: 380 g (5.56) / 450 g (7.62)
Factory-Tested Sound Reduction: 20 dB (5.56)
Materials: Inconel/Thermax
Finish: sandblasted/grey
MSRP (USD): tba

SRT ARMS
Integrally Suppressed 9mm AR-15/M16

Integrally suppressed upper, 9mm or .45 ACP, 1.5-inch OD tube. Pinned and welded 16-inch bolt face to end of tube or removable for registered MG or SBR lowers. Ported barrel for additional sound reduction. Porting available to make 115gr subsonic or max velocity for use with 147gr subsonic. www.srtarms.com

Caliber: 9mm
Weight: Adds 1lb to upper weight
Diameter: 1.5in
Material: 4130 tube, 7075 AL baffles and end caps
Finish: Black Cerakote
Factory-Tested Sound Reduction: 116-119 dB depending on bullet weight
MSRP: $780 using customer supplied barrel, handguard and upper receiver

ELITE IRON
DELTA MOD2

The Elite Iron DELTA MOD2 is a shorter version of the popular DELTA and is designed for .223 /5.56 rifles only. The compact design and lighter weight makes it a great choice for hunting and tactical applications. Baffle core design minimizes the POI shift. Thread pitch ½ -28. Full-auto rated. www.EliteIron.com

Caliber: .223 /5.56 only
Overall Length: 6.375in
Exterior Diameter: 1.5in
Weight: 17.9oz
Sound Pressure Level Reduction: 35 dB
Materials: Tube is made from 316 SS. Internals are machined from 17-4 H900 SS
Finish: Black Cerakote
MSRP (USD): $720

ELITE IRON
ECHO LITE 5”

The all titanium ECHO LITE 5-inch suppressor is primarily designed for use on handguns and can be used on rifles as well. It delivers solid performance in a lighter suppressor. The ECHO LITE 5-inch can be disassembled for cleaning. Includes takedown tool. Thread pitch 1/2-28 x .400. www.EliteIron.com

ECHO LITE 5”
Caliber: .22 LR only
Length: 5in
Weight: 4.7oz
Diameter: 1in
Material: Titanium
Finish: Black Cerakote
Sound Pressure Level Reduction: 31 dB High Velocity, 35 dB Subsonic
MSRP: $455

LIBERTY SUPPRESSORS
The Sovereign

The Sovereign rifle silencer is perfect for the law enforcement officer, hunter as well as the long-range shooter. It combines lightweight with numerous mounting solutions to create the most versatile and lightweight silencer to date. Titanium construction provides superior strength as well as low muzzle weight for less fatigue in the field. Combined with our LS1 muzzle brake mount, this is the ultimate package. www.libertycans.net

Caliber: 7.62mm
Overall Length: 7in
Exterior Diameter: 1.625in
Weight: 12.5oz
Sound Pressure Level Reduction: 33+ dB
Materials: Titanium/Stainless Steel
Finish: Black Cerakote Type C
MSRP (USD): $1,050

DAKOTA SILENCER
Varminter 4.0

Varminter 4.0 will be available early 2018. The Varminter is a 100% titanium hybrid that’s modular from 9 inches to 7 inches. It’s a hybrid because the 2-inch extension is a uniquely designed monocore baffle system while the 7 inch is all stacked baffles. The Varminter is completely serviceable and comes all the way apart for easy cleaning. Only the Varminter 4.0 .30 calibur will be modular, but Dakota Silencer will also be releasing the Varminter 4.0 in a .223. This will be the quietest Varminter the company has made to date. www.dakotasilencer.com

VARMINTER 4.0
Caliber: .30 and .223
Length: 7in; 9in with extension
Weight: N/A
Diameter: N/A
Material: Titanium
Finish: N/A
Sound Pressure Level Reduction: N/A
MSRP: N/A

THOMPSON MACHINE
The Poseidon 9mm

In production since 2009, the Poseidon 9mm is the smallest, lightest, hearing-safe 9mm suppressor on the market. Its excellent performance on .22LR hosts, .32acp hosts, and .380acp hosts gives it the versatility to match. The Poseidon is in use with military and law enforcement. www.thompsonmachine.net

POSEIDON 9MM
Caliber: 9mm
Length: 4.125in
Weight: 4oz
Diameter: 1.25in
Material: Hard anodized 6061 and 316 Stainless
Design: Monocore, Take-Apart Design
Suppression: Up to 25dB when wet and wiped
MSRP: N/A

About the Author

Dr. Philip Dater has been involved in the sound suppressor industry for over 40 years as Automatic Weapons Company (New Mexico) and Antares Technologies, Inc. His interest has been in the field of design, testing and manufacturing. He founded Gemtech in 1993 and retired in the summer of 2017 at the age of 80. He continues to consult and perform testing on a part-time basis, and several times each year teaches his signature course “Silencer History, Technology & Testing” at Phoenix Defence in Henderson, NV. www.phoenixdefence.com

$0–$50

US Night Vision
Mag Wraps

Want to change the style of your gun without having to paint it? Well now you can with our vinyl Mag Wraps. Mag Wraps come in 3-packs and will fit any 30rd AR-15 Magazine. They are easy to install and offer the ultimate in protection and graphics for your magazines. The wraps stop right at the mag well so there is no interference with the operation of your magazine while in the weapon. One package will retrofit three magazines.

Our premium US-Made wraps offer superior UV protection, chemical resistance, protection from scuffs and scrapes and are completely waterproof. All Mag Wraps are finished in a non-reflective matte outer coating. They will work with any substrate and leave zero residue when removed. They can be placed over each other if need be for an immediate mission profile change. Our exclusive two-piece wrap design leaves no seams on the crucial sides of the magazine. Mag Wraps Real Patterns, Real Protection. www.USNightVision.com and www.LoadOutLounge.com

Chipotle Publishing LLC
1 Year’s Subscription to Small Arms Review

The ultimate Small Arms Resource on industry practices, historical archives, new products, legal issues and breaking news. The 10 Issue—Subscription comes with free online access to articles and content. To order, visit www.smallarmsreview.com

VORTEX OPTICS
Defender Flip Cap

The E-10 flip cap is the last flip cap you will ever need! Virtually indestructible, this cap will fit snugly on nearly all Vortex Optics and features a snap flat spring that will keep your line of sight unobstructed.

Rifle ranges all over the world are littered with broken flip caps. This is one cap you will most likely never see in a flip cap boneyard. The E-10 cap has three stop positions: The first vertical, to put your dope disk (optional accessory) literally right in your face; The second at a 45°; and the third at 90° to lay flat back.

The E-10 fits all Vortex Riflescopes except the 1-inch tube Viper model VPR-M-01BDC, VPR-M-04BDC and VPR-M-03BDC. Outside diameter: 41.5-46 mm | 1.6-1.8 inches. www.vortexoptics.com

OTIS TECHNOLOGY
Ear Shield

Otis Technology presents a smarter way to protect your hearing while improving your response to range commands and other communication. The Ear Shield’s new Sound Reduction Chamber Technology changes the sport shooter’s experience. Now you can shield your ears from high-decibel noise comfortably while hearing other sound frequencies, like speech, clearly without removing your gear. Unlike muffs, the Ear Shield’s compact design won’t get in the way of achieving the proper cheek weld. www.otistec.com

• Improves communication
• Eliminates stock interference
• Cool and comfortable
• No batteries required
• Lightweight and collapsible
• Adjustable to fit any shooter

$51–$100

EliteIron
EliteIron Suppressor Wrap

A perfect holiday gift for any shooter, EliteIron Suppressor Wraps help solve optical mirage, heat and concealment issues for suppressed weapons. Buy an EliteIron Suppressor Wrap online at www.eliteiron.com/product-category/suppressor-wraps

• EliteIron Suppressor Wraps help eliminate optical images caused by rising heat.
• EliteIron’s 1000 Denier FR Cordura, NOMEX and CarbonX wrap materials help protect a shooter and gear against a suppressor’s hot surface.
• EliteIron’s wraps provide a way to attach camouflage elements for concealment purposes.
• Starting at $48, EliteIron rifle and pistol suppressor wraps come in colors and patterns designed to match any environmental requirement. And they are available in sizes that fit all EliteIron suppressors and most others.

$101–$200

Knight’s Armament Company
Folding Micro Front and Rear Sights

KAC’s line of Micro Iron Sights are currently in use by the United States Army, Marine Corps and numerous law enforcement agencies worldwide. This is because they are built to exacting tolerances, maintain their zero under adverse conditions and, when folded, have one of the lowest profile top-rail footprints in the industry. KAC Folding Micro Front and Rear Sights are no exception and feature a tool-free, finger-adjustable front sight post that makes performing sight corrections extremely fast and simple. Micro Front, PN: 25654/Micro Rear, PN: 25650. Knightarmco.com or salesteam@knightarmco.com

$201–$500

Concealed Carry
Leather Satchel

Recognized as the best. Concealed Carrie products are the perfect Holiday Accessory. Classic and timeless, Concealed Carrie’s distressed leather Satchel features subtle aged hardware and the utmost in quality of material and style. The separate concealed carry compartment is accessible from the interior or exterior of the bag for right- or left-handed carriers and designed to allow for cross body draw. You’ll want to carry this beauty every day! All Concealed Carrie handbags securely hold tasers, stun guns, pepper sprays and like forms of non-lethal, self-defense products. We’ve got your back.

OVER $1,000

Liberty Suppressors
Sovereign Rifle Silencer

The Sovereign Rifle Silencer is perfect for the law enforcement officer, hunter and the long-range shooter. It combines lightweight with numerous mounting solutions to create the most versatile and lightweight silencer to date. Titanium construction provides superior strength as well as low muzzle weight for less fatigue in the field. Combined with our LS1 muzzle brake mount, this is the ultimate package. For more information, please visit www.libertycans.net.

Excelitas Qioptiq
SAKER Fused Weapon Sight

Uncooled In-Line Image Intensified and Thermal Fused Weapon Sight. The ability to combine technology to produce a product greater than the sum of its parts is a goal many seek to achieve. SAKER is a high performance in-line fused weapon sight combining image-intensified and thermal imaging technologies to deliver enhanced 24-hour capability. A fully qualified military fused weapon sight designed specifically for short- and medium-range surveillance and target engagement–SAKER provides the user with the ability to rapidly Detect, Recognise and Identify targets in all weathers and battlefield conditions. The enhanced capability provided by SAKER is a game changer. For more information, please visit www.qioptiq.com or call Excelitas Qioptiq direct +44(0)1745 588002.

GUN MOUNTAIN, LLC
Micro Galil Parts Sets

The Unicorn of Galils, the Micro Galil machine gun with left-hand charging. Unheard of outside of a few elite Israeli units, Gun Mountain has managed to get a few of these in “like new” condition and some that are NRA Excellent. These came from an elite Israeli unit armory. Barrels are cut per ATF regulation, as are the receivers. Receivers are chop-saw cut with the requisite section above the mag well removed and destroyed. One magazine per kit. (702) 564-3272

Knight’s Armament Company
SR-25E2 APC

The SR-25E2 APC is the latest evolution of the dual role 7.62mm NATO Carbine. The APC is equally adept at putting rounds on target past 800 meters or rapid multi-shot engagement at close range, with a barrel and bolt life to support the training regimen necessary to master these skills. An ambidextrous bolt release, selector and magazine release offers the left-handed user the ergonomic advantages inherent to AR-15-based controls, as well as giving right-handed users alternate methods of manipulation to increase efficiency of movement. The Drop-In 2-Stage Trigger serves double duty as an aid to long-range precision marksmanship while enabling surgical speed shooting at close range. A 7.62QDC Flash Suppressor reduces flash and ground disturbance and supports KAC QDC Signature Reduction Devices. PN: 31955. Knightarmco.com or salesteam@knightarmco.com

FREEDOM ARMORY MACHINE WORKS
Dragoon .450 Bushmaster

Freedom Armory Machine Works (FAMW) introduces the Dragoon .450 Bushmaster (.450B) Direct Attach (DA) suppressor utilizing Total Breakdown Technology (TBT) and Gas Indexing Technology (GIT) [U.S. Patent 9,410,761]. TBT allows the user to remove, clean and service ALL components. GIT allows the rotational orientation of baffles in a given stack for optimum sound reduction with centerfire pistol calibers shot from a rifle. Top-rated sound reduction is achieved across the entire caliber range of this titanium suppressor creating a truly universal suppressor. Plus, .308 is hearing safe at the ear! Optional Thread Mounts are available creating an extremely flexible design. See Dealer Locator www.famchineworks.com or contact Freedom Armory Machine Works directly (717) 227-9060

Aimpoint Inc.
CompM5

With the same ruggedness and features, now smaller and powered by a AAA battery–meet the newest member of the Comp Series–the CompM5. With over 5 years of constant-on use with a single battery, the CompM5 is a high performance red dot sight developed to meet the needs of a specific official end user. The optical design of the red dot follows the movement of the user’s eye while remaining fixed on target, eliminating any need for centering. It allows for unlimited eye relief and is compatible with Aimpoint magnifiers as well as all generations of Night Vision Devices. Buy at any Aimpoint Dealer.

FN USA ANNOUNCES NEW M249S PARA IN BLACK AND FDE

FN America, LLC, is pleased to announce the latest addition to the FN Military Collector Series—the semi-auto FN M249S Para or Paratrooper model, originally developed for airborne troops. Building on the company’s unique tradition of offering semi-automatic variants of the most popular military-designed firearms, the rifle will join the full-size FN M249S Standard and the FN 15 Military Collector M4 and M16. The M249S Para is the fourth in their series of classic, semi-automatic FN military rifles, and like the Standard, the Para is authentic to the last possible detail. You’ll notice only two major differences between the semi- and full-auto versions—the barrel length and reconfigured internal components to change the rifle’s operation from open-bolt to closed-bolt. Authenticity was critical in this series, and they changed as little as possible. The rifle features a machine-gun-grade, 16.1-inch, cold hammer-forged barrel, closed-bolt for semi-automatic-only operation, classic M249 flip-up feed tray, integrated steel bipod, robust gas-piston system and the iconic telescoping and rotating buttstock, making it lighter and more compact. The rifles will be available in either black or Flat Dark Earth (FDE). The guns will accept either 30-round M-16 style magazines or 200-round plastic ammo boxes. For more information you can contact FN America at www.fnamerica.com.

BATTLE RIFLE COMPANY INTRODUCES NEW CUTLASS MARITIME RIFLE

Battle Rifle Company has announced its all-new 2017 BR4 Cutlass rifle. The Cutlass is based on Battle Rifle Company’s best-selling Spectre Rifle and is specifically designed for MARSEC (Maritime Security) operations and shipboard usage. The Cutlass is built with care to ensure long-lasting life in extreme conditions. Its extended rail and low-profile gas block allow for more accessories to be installed, making it well-suited for shipboard, coastal and all-weather operations. They built the Cutlass so that no direct ferrous, metal-to-metal contact is made throughout the entire rifle, ensuring corrosion-free operation, even after months at sea. This rifle is perfect for shipboard operations, both coastal and riverine. If you live or work on the water, this gun is perfect for you! Additionally, Battle Rifle Company is introducing a new color for 2017. The MARSEC rifles will be available in the all-new Battle Rifle Ocean Blue—a marine gray-blue which provides a great contrast for this special rifle. For more information on Battle Rifle Company, visit www.battleriflecompany.com.

GEMTECH INTRODUCES NEW SUPPRESSORS FOR 2017

Gemtech has just introduced its first new suppressors for 2017. The first is their new LUNAR-45. The Gemtech Lunar-45 is the culmination of decades of silencer innovation. They have created the lightest and quietest modular .45 suppressor available that is able to be taken apart and cleaned. The Lunar-45 is crafted from military-grade aluminum and titanium for the utmost in durability and strength. The modular suppressor is available in either a short length (6.9 inches) or a long length (8.5 inches), depending on the shooter’s needs. The short suppressor is said to have a 136 dB noise reduction, and the longer version has a 129 dB reduction. Gemtech offers a variety of mounting options for the Lunar-45 allowing it to be used with a variety of platforms and calibers. The new suppressor is also full-auto-rated.

The other new suppressor is their INTEGRA, which is an AR-15 integrally suppressed upper receiver. The new suppressed upper will be available in both 5.56 and 300 BLK. Gemtech has teamed up with NEMO Arms to create the smallest and easiest-to-maintain package the shooting world has ever seen. The INTEGRA utilizes Gemtech’s proven G-Core Technology that is removable, cleanable and replaceable while still bringing the best sound reduction of any similar-sized package. The NEMO Arms patented gas block eliminates blowback, making this upper more comfortable to shoot. The barrels of both units offer either 10- or 10.5-inch lengths with integrated lengths of 16.1 inches overall. Information on all of Gemtech’s suppressors can be found at www.gemtech.com.

MEOPTA INTRODUCES NEW MEOTAC 3-12×50 RD

Meopta is pleased to introduce its newest tactical riflescope—the 34-mm MeoTac 3-12×50 RD.Designed for use on assault rifles, the MeoTac 3-12×50 RD is an excellent scope for medium-range engagement and is engineered to meet the needs of armed forces, security details and tactical shooters worldwide. This scope features MeoLux, Meopta’s most advanced lens coating. MeoLux, combined with Schott glass and expert design, enables 99.8% light transmission per lens surface allowing users to see better and farther in the most challenging light. The solid 34-mm, aircraft-grade aluminum tube allows for expansive windage and elevation ranges of 55 MOA and 100 MOA respectively with click adjustments of 1/3 MOA. The illuminated MilDot 3 RD reticle, located in the first focal plane, enables use of the range-finding elements of the reticle on any power setting. The new MeoTac 3-12×50 RD also features precision tactical mil-mil turrets with a large grip, easily distinguishable positive clicks and a zero-stop function. The side-focus parallax adjustment ranges from 27 yards to infinity, and the integrated illumination control is also located on the side of the center of the scope, making adjustment in the field quick, easy and convenient. The RD illumination system features a highly defined illuminated red dot reticle with 16 reticle intensity settings for all light conditions and intermediate off positions between every setting. The auto-off function will switch the illumination off if unused for one hour. The MeoTac 3-12×50 RD features Meopta’s MeoShield protective lens coatings, MeoQuick fast-focus eyepiece and an erector system designed for maximum holding force to withstand heavy caliber recoil. This scope also has an anodized exterior for scratch resistance and is waterproof and fogproof for maximum performance and durability. The MeoTac 3-12×50 RD is covered by Meopta’s North American lifetime transferable warranty. Find out more at www.meoptausa.com.

RUGER AMERICAN PISTOL IN .45 AUTO

Sturm, Ruger & Co., Inc., is proud to announce the addition of the Ruger American Pistol Compact in .45 Auto. This newest compact model is offered in the “PRO” configuration with no external manual safety. Originally introduced in December 2015, the feature-rich Ruger American Pistol was designed with the latest U.S. Military standards in mind and was tested in the harshest environments to ensure the rugged reliability consumers have come to expect from Ruger. Ruger polled law enforcement and military trainers throughout the country to select the form, function and features of the Ruger American Pistol. The resulting pistol combines a recoil-reducing barrel cam (which better spreads recoil over time) with a low-mass slide, low center of gravity and a low-bore axis to provide better balance, less felt recoil and less muzzle flip than comparable pistols. The Ruger American Pistol also features a pre-tensioned striker system, which allows for a short take-up trigger with positive reset, and a modular wrap-around grip system that adjusts palm swell and trigger reach to fit a wide range of hand sizes. With a 3.75-inch barrel, overall dimensions of 7.25 inches long, 4.65 inches high and a weight of 28.6 ounces, the Ruger American Pistol Compact model shares all of the features and rugged reliability of the duty-size gun in a smaller, lighter, more concealable package. It ships in a hard case with medium and large replaceable grip modules and two nickel-Teflon-plated steel magazines (one 10-round extended magazine and one 7-round compact magazine). The American-made Ruger American Pistol is built on a rigid, one-piece, precision-machined, stainless steel chassis with integral frame rails and fire control housing. Additional features include genuine Novak LoMountCarry three-dot sights, a stainless steel slide with a non-reflective, black nitride finish, a one-piece, high-performance, glass-filled nylon grip frame and a mil-standard 1913 accessory rail. For more information on the Ruger American Pistol Compact in .45 Auto or to learn more about the extensive line of award-winning Ruger firearms, visit www.Ruger.com.

LIBERTY SUPPRESSORS ANNOUNCES THE SOVEREIGN

Liberty Suppressors is proud to introduce their newest .30 caliber suppressor, the Sovereign. The Sovereign was designed for the precision rifle shooter, as well as for the hunting community. At just over 1.5 inches by 7.125 inches and only 12.7 ounces, this titanium silencer all but disappears on the end of a rifle. It comes with both 1/2-28 and 5/8-24 direct-thread adapters, as well as the 5/8-24 LS1 muzzle brake mount and a full complement of beyond-the-box accessories available for the upmost in versatility. They round out the package with a custom Armageddon Gear Suppressor Cover making the Sovereign one of the most adaptable and functional silencers on the market. Find out more about the Sovereign and the full line of Liberty Suppressors at www.libertycans.net.

FEDERAL AMERICAN EAGLE ANNOUNCES REVOLUTIONARY SYNTECH AMMO

Federal Ammunition is pleased to announce a whole new concept for range ammunition with introduction of American Eagle Syntech: A smoother way to shoot. Shipments of this new product are now being delivered to dealers. American Eagle Syntech is the first range-specific ammunition designed to reduce fouling and extend barrel life with a high-tech polymer bullet coating. Combined with specialized clean-burning powders, your gun will stay cleaner, longer, so you can shoot more—and shoot better. The exclusive Catalyst primer provides the most reliable, consistent ignition possible. The Syntech system offers target shooters the most advanced range ammunition available and the perfect way for handgun owners to protect their investment from the inside out. The features and benefits include the polymer-encapsulated Syntech bullet that prevents metal-on-metal contact in the bore, eliminating copper and lead fouling, while extending barrel life as well as an exclusive primer formulation that provides reliable, consistent ignition. Clean-burning propellants also minimize residue and fouling which significantly reduces the required frequency of firearm cleaning. The absence of a copper jacket minimizes splash-back on steel targets, making it perfect for target practice or competition. The new rounds also have less perceived recoil. The American Eagle ammunition is available in 9mm Luger 115 grain, 40 S&W 165 grain and .45 Auto 230 grain. Contact them at www.federalpremium.com.

IWI US LAUNCHES HIGHLY ANTICIPATED TAVOR X95

IWI US, Inc., a subsidiary of Israel Weapon Industries (IWI) Ltd., proudly debuts the compact, modern designed TAVOR X95 bullpup. IWI US introduced the X95 select-fire bullpup to law enforcement customers last year and now our civilian customers can buy a commercial version. The X95 is a modern, modular bullpup design emulating all the familiar features of the TAVOR but on steroids. The TAVOR X95 platform incorporates a tri-rail forearm covered by three removable vented rail covers. The TAVOR style trigger guard is modular and can easily be converted to a more traditional trigger guard with pistol grip. The charging handle has also been relocated closer to the shooter’s center mass, and perhaps the most significant departure from the TAVOR is the ambidextrous magazine release, located to a more traditional AR-15/M16 location on the X95. Like the TAVOR SAR, the X95 will be available in a 16.5” 5.56 NATO and .300 Blackout and 17” 9mm Luger Parabellum. All models feature interchangeable cold hammer forged (CHF) barrels manufactured and engineered to IWI’s demanding specifications. Conversion kits in .300 Blackout, 5.56 NATO and 9mm will also be available. The TAVOR X95 in 5.56 NATO and .300 Blackout uses standard AR-15/M16/STANAG magazines and is supplied with one black Magpul Gen III PMAG. It will be available in Black, Flat Dark Earth and OD Green. Watch future issues of SAR for a full test and evaluation of this new rifle. The price for the TAVOR X95 is $1,999.00 and the Conversion Kits are $899.00 in 5.56 NATO and 9mm and $499.00 in .300 Blackout. For more information, please visit www.iwi.us.

DANIEL DEFENSE RELEASES FIRST CHOICE 300 AAC BLACKOUT AMMUNITION

Daniel Defense, engineer and manufacturer of some of the world’s finest firearms and accessories, has released the first caliber of high-quality ammunition it will offer under its First Choice brand: 300 AAC Blackout. The company also has plans to expand its offerings to include the popular 5.56mm and 7.62mm calibers in the future. The new Daniel Defense 300BLK (7.62x35mm) Subsonic Ammunition is designed for target shooting and/or home defense. It is manufactured using the highest-quality components available, including durable brass cases and precision 220-grain Lapua Scenar-L OTM bullets, the first choice for serious target-shooting competition.

They’re passionate about the launch of their new 300BLK ammo, as it represents a whole new era for their brand—one where they can now ensure that the ammo that goes into their firearms is as high quality as the firearms themselves. To ensure the highest levels of quality, each and every First Choice round stamped with a “DD” must undergo and pass a thorough inspection to ensure critical dimensions that affect accuracy are met before it leaves the Daniel Defense factory. The Daniels have a long-standing philosophy on seconds and blemished product, “If it’s not perfect, it doesn’t go to market.” Daniel Defense 300BLK Subsonic Ammunition retails for $50.00 for a box of 30 rounds. It is currently for sale only directly from Daniel Defense online at www.danieldefense.com.

LIBERTY SUPPRESSORS INTRODUCES THE NEW CENTURION SUPPRESSOR

The Centurion is everything you want in a compact 9×19 pistol suppressor. It is designed to provide excellent suppression on 9mm handguns, dry or wet. They designed it to be taken apart since 9mm tends to run a little dirty, this by default makes it suitable for 22LR as well. If there was ever a suppressor that is perfect for the nightstand, the Centurion would be it. The length added to the host firearm is only about 6 inches so it fits really well with virtually every 9X19 handgun that has ever had a threaded barrel put in it. They made this suppressor 34% shorter than their outstanding Mystic X suppressor by reducing the footprint a full 3 inches from the silencer module. This makes for a very compact platform that handles very well. This suppressor also performs very well in rimfire calibers as well as the 300 Blackout carbines. Short, light and handy, this suppressor works well in many different roles. The Centurion breaks down into 3 basic parts (not including the mount) and due to the wavelok cut tube, can only be assembled one way. This makes reassembly a snap and virtually foolproof. The core is stainless steel, which makes it acceptable to being cleaned with harsh chemical solvents, stainless steel pins and ultrasonic applications (electrical tape on the Cerakoted end will protect it from the vibratory cleaning action). The outer tube is made from titanium so the entire suppressor weighs just 7.9 ounces. This unit comes standard with a 1/2-28 booster assembly installed and all of the Mystic X mounting solutions are compatible as well. This suppressor is sure to be a range favorite as well as being right at home on the nightstand at the end of the day. You can find out more at www.libertycans.net.

NEW AR9 9MM PISTOL CALIBER FROM WILSON COMBAT

The Wilson Combat AR9 9mm pistol caliber carbine was designed from the ground up as the new standard in pistol caliber carbine reliability. The use of common 9mm service pistol magazines makes it an ideal choice for patrol, home defense and cost-effective
tactical training.

Wilson Combat engineers have designed three unique AR9 lower receivers with last round bolt hold open that are compatible with the most popular 9mm service pistol magazines from Glock, Beretta and S&W. The Wilson Combat AR9 closed-bolt blowback operating system is soft shooting and reliable with a wide variety of 9mm loads and exhibits flawless feeding with all common pistol bullet shapes, including hollowpoint and +P tactical ammunition. The AR9 bolt hold open ensures reliable lockback on empty with your pistol’s factory magazines. The AR9 proprietary bolt carrier group with heavy duty claw extractor and plunger ejector is tuned for exceptional reliability. These new billet machined aluminum receiver models also accept standard AR accessories like furniture, triggers, charging handles, buttstocks and optics, and incorporate an integral trigger guard and flared magwell for fast reloading. The AR9 series of carbines has multiple unique patent-pending features that make it unique to the 9mm carbine market. The AR9 is also an optimized suppressor host with minimal gas blowback and enhanced accuracy over other designs. Wilson Combat carbon steel match-grade button-rifled 1-10” twist 9mm barrels ensure that the AR9 meets our stringent quality and accuracy requirements. The Wilson Combat AR9 can be ordered with your choice of Glock 17, S&W M&P or Beretta 92 magazine compatibility and configured as a pistol, carbine or short barreled rifle (all NFA rules apply). The AR9 is offered with your choice of fluted or non-fluted barrels in multiple lengths and various Wilson Combat designed muzzle devices. Not simply a converted AR-15, the Wilson Combat AR9 has been specifically designed for superior reliability and maximum accuracy, while retaining the familiar handling and controls of the AR platform. The AR9 is available with your choice of pistol magazine compatibility, barrel length, custom Armor Tuff colors and other accessory options to suit your specific needs. Find out more at www.wilsoncombat.com.

TACTICAL WALLS ADDS NEW RFID LOCKING MODELS

TacticalWalls continues to change the way people think about home firearms storage. Known for its Hidden in Plain Sight philosophy, each product in the TacticalWalls line is disguised as a fully functional piece of home décor – such as shelves, mirrors, marker-boards and much more. Now, users will have even greater security and easier accessibility thanks to TacticalWalls new Radio Frequency Identification (RFID) locking models. The RFID locking mechanism will be offered as an optional alternative to the existing magnetic lock on select TacticalWalls models. With the release of the new RFID models, firearms owners can access their guns even faster in an emergency. Opening up the hidden compartment is as easy as swiping the preset RFID card in front of the locking mechanism. Each unit will come standard with two key cards and one programming card used to match the key to the proper unit(s). Firearms owners can also order additional RFID cards if needed. One card can also be set to open multiple units, granting access to each firearm staged throughout the home. Another unique feature of the new RFID-locking models is a programmable Tattle Tale function. When turned on, the Tattle Tale function will start beeping after the unit has been left open for a period of time. This important safety enhancement helps firearms owners keep guns from unwanted users by reminding them when the compartment is left open. This feature can also be disabled if preferred. If the battery on the RFID locking mechanism runs out of power, the unit automatically defaults to an unlocked-but-still-closed position. Find out more at www.tacticalwalls.com.

By The Small Arms Review Editorial Staff

Company: GEMTECH
Model: The ONE
Caliber: 7.62 NATO / 308
Length: 7.5”
Diameter: 1.625 with Shroud
Weight: 16.3oz
Factory Tested Sound Reduction: 32dB
Materials: Titanium & Inconel
Finish: High temp black Cerakote
Website: www.gemtech.com
MSRP: $1099

This is the ONE suppressor to go to for any application you could want. GEMTECH has answered customer demand with our newest addition to our Extreme Duty line. With caliber ratings from short 5.56 full-auto to 300WM, it’s the only rifle suppressor you’ll ever need. Made of Titanium and Inconel, not only does it perform to SOCOM standards, but it won’t weigh down your overall set-up. Caliber Rated: 300WM, 300BLK, 7.62 NATO, 5.56 NATO

Company: Liberty Suppressors
Model: Cosmic
Caliber: 45 ACP
Length: 8 “ (Suppressor Module Only)
Diameter: 1.375”
Weight: 9.5 oz
Factory Tested Sound Reduction: 22-24 dB Reduction
Materials: Stainless / Titanium
Finish: Type C Cerakote
Website: www.libertycans.net
MSRP: $799

Liberty Suppressors is a family owned company specializing in making some of the quietest suppressors on the market. Quality coupled with the best customer service in the industry is what we do best. The Cosmic is no exception, with great suppression and rated for over 70 calibers, Liberty has set a new benchmark in the industry.

Company: EliteIron
Model: BATTLEDOG
Caliber: .308
Length: 6”
Diameter: 1.625”
Weight: 16oz
Factory Tested Sound Reduction: 28db
Materials: 17- 4 Stainless Steel
Finish: Cerakote
Website: www.eliteiron.com
MSRP: $760

From today’s need for lighter, stronger suppressor systems comes the EliteIron BATTLEDOG. Each suppressor comes as a 3-piece system to include muzzle brake and cover cap for thread protection which also acts as a blast mitigation device when shooting unsuppressed. Each BATTLEDOG is meticulously hand assembled and TIG welded for incredible strength and reliability. Advancements in material and technology make the BATTLEDOG truly full-auto rated. Putting an end to all the noise about suppressors.

Company: SRT Arms
Model: Shadow XL TI
Caliber: 7.62 NATO / 308
Length: 9.3”
Diameter: 1.5”
Weight: 16 oz
Factory Tested Sound Reduction: 34 db on 16” barrel .308, 33 db on 20” barrel 300 Win Mag.
Rated for: .308, 30-.06, 300 MW, .300 UM, 30/338, and any smaller calibers than .30.
Materials: 6Al-4V Titanium with 316 stainless steel blast baffle
Finish: Cerakote
Website: www.srtarms.com

.385” baffle and endcap aperture is forgiving for minor barrel thread misalignment to bore. Patented AZTECH baffle is symmetric and does not require any “clocking” of suppressor to barrel. Any minor POI shift is always straight down from unsuppressed. Measures at 133 db absolute on .308 and 134 db on .300 Win Mag 1 meter to left of muzzle to Mil-Std 1474D. 316 Stainless blast baffle eliminates sparking that occurs from Ti blast baffles.

Company: Rugged Suppressors
Model: Surge 762
Caliber: 30 Caliber
Length: 9” – Standard Configuration / 7.5” Short Configuration
Diameter: 1.5”
Weight: 21.5oz – Standard Configuration / 17.5oz Short Configuration
Factory Tested Sound Reduction: 133.4 – 138.4dB – .308; 131.5 – 137.3db – 5.56;
Materials: 17-4PH Stainless Steel; Stellite Baffle Core
Finish: Cerakote
Website: www.ruggedsuppressors.com
MSRP: $1300.00 with 7.62 flash hider

Rugged Suppressors, founded in 2014 by Henry Graham and Michael Derdziak, creates innovative products that upset the industry. We’re pioneering new materials and manufacturing methods that create superior suppressors you can trust to work right the first time.

We are committed to being the best silencer manufacturer in the United States by always focusing on positive customer interactions before and after the sale, producing cosmetically and functionally superior products, and a desire to continually outpace our competition through rigorous new product development and testing.

Company: Hailey Ordnance Company
Model: AeGIS
Caliber: .22LR
Length: 17.5” (8.5” barrel, 9” suppressor)
Diameter: 0.920”
Weight: Complete integral barrel 19-24oz
Factory Tested Sound Reduction: With Ruger 10/22, 18-23dB reduction depending on ammo
Materials: SS Lothar Walther Barrel, 7075-T6 Baffles, SS or Titanium Sleeve, optional Nitrided Steel Blast Insert
Finish: CeraKote or Matte Metal
Website: www.haileyord.com
MSRP: $550-675

The AeGIS by Hailey Ordnance Company improves on the conventional integral suppressor by including a patent pending externally adjustable gas bleed system and a Nitride hardened pressed in steel blast baffle. The Adjustable gas system allows a shooter to adjust the amount of gas being bled off behind the projectile to tune the rifle for maximum velocity, maximum sound reduction or to calibrate a specific ammunition to the subsonic threshold.

Company: (SEG) Stealth Engineering Group
Model: Competition
Caliber: .223 – .308
Length: 6.75”
Diameter: 1.55”
Weight: 14.5 oz
Factory Tested Sound Reduction: 35 dB reduction average
Materials: Titanium
Finish: Any
Website: www.SEGsuppressors.com
MSRP: $847

The SEG Competition suppressor is an evolution of the only symmetrical suppressor on the market. SEG already has competition shooters switching for our accuracy, we wanted to give them even more reason. January 2016 after testing with various shooting teams, SEG released the Competition Hancock™. The result is the least amount of bullet shift and most consistent suppressor that actually suppresses. A guide hole is included for single stamp SBR pinning.

Company: (SEG) Stealth Engineering Group
Model: SURG Suppressed Upper Receiver Group (Integral)
Caliber: .223 – .300 Blackout
Length: Barrel Length 16”
Diameter: 1.55
Weight: < 5 lbs.
Factory Tested Sound Reduction: 30-40 dB
Materials: Titanium/SS
Finish: Any
Website: www.SEGsuppressors.com
MSRP: $2000

To fully understand the scope of the SURG project you must review the spec. (Suppressed Upper Receiver Group) This project will pioneer the transition for our military to integrally suppressed rifles. SEG saw this coming and has been developing the solution well before the spec was released on November 28, 2015. SOCOM has allowed us to sell this technology to the US public. Its not just an integral suppressor, much more goes into the design that makes only ours successful.

Company: SilencerCo
Model: Hybrid
Caliber: 9mm to .45–70 GOV. Full Auto Rated. Magnum Rated Up To .338, Lapua Magnum with 18” Barrel or Longer
Length: 7.8”
Diameter: 1.565”
Weight: 13.8 oz., (with Direct Thread Mount)
Factory Tested Sound Reduction: 125.7 dB to 140.6 dB
Finish: Grey Cerakote
Website: www.silencerco.com
MSRP: $999.00

The Hybrid™ is the silencer for any platform. Compatible with calibers ranging from 5.56mm to 9mm, .45–70 GOV to .458 SOCOM, and many in between, the Hybrid is both full auto and magnum-rated and can be used on pistols, rifles, and submachine guns. Boasting low-120 dB’s on 300BLK and remaining hearing-safe with .45–70, the Hybrid offers an unparalleled pairing of versatility and performance – a combination you’ve come to expect from SilencerCo products.

The Hybrid is rated down to 16? barrels for .45–70 and .458 SOCOM and down to 18? barrels for all magnum calibers up to .338. With a slew of compatible accessories available, you can turn the Hybrid into the perfect silencer for any demand.

Company: Yankee Hill Machine
Model: Phantom, Ultra Light Tactical (YHM-4300s)
Caliber: 30 Cal (.17 HMR through .308 Winchester.)
Length: 7.625”
Diameter: 1.6”
Weight: 13 Oz.
Factory Tested Sound Reduction: -32 dB
Materials: Grade 9 Titanium with Heat Treated Inconel Blast Baffle
Finish: Natural Titanium or Black Cerakote®
Website: http://yhm.net/30-cal-ultra-light-tactical-2067.html
MSRP: $1130.00

YHM .30 Cal Phantom Tis are light enough to leave on your rifle while navigating your environment, and are equally effective for Close Quarters situations or long-range shots. All models in the series are full-auto rated, and downward compatible to YHM 5.56 Quick Detach mounts, for fast redeployment on another host firearm. Choose from Titanium or Black Titanium, Direct Thread or Q.D. Mount.

Company: Yankee Hill Machine
Model: Sidewinder, 9mm (YHM-3240)
Caliber: Available in 9mm, .40Cal and .45 Cal
Length: 7.8”
Diameter: .375”
Weight: 10 Oz.
Factory Tested Sound Reduction: -36 dB
Materials: Aircraft Grade Aluminum and Stainless Steel Components
Finish: Matte Black Plated
Website: http://yhm.net/9mm-sidewinder-sound-suppressor.html
MSRP: $699.00

YHM’s 9mm Sidewinder is the new standard in pistol caliber suppression. Many special features work together to keep weight down while offering Hearing Safe decibel reduction. The Sidewinder is constructed of Aircraft Grade Aluminum Tube and Baffle and 17-4 Stainless Steel mounting and wear components. This combination of materials creates a durable, dependable and cost-effective solution to any shooter. A 300 BLK adapter is sold separately to allow the operator to fire 300 BLK Subsonic loads through the YHM Sidewinder Suppressor on fixed barrel rifles. The Sidewinder is also rated for autofire
and use on SMGs.

Company: AWC Silencers
Model: THOR PSR
Caliber: .308 – .338
Length: 8”
Diameter: 1.625”
Weight: 18.6oz
Factory Tested Sound Reduction: -32db – -34db (MIL-STD Testing on Surgeon Rifles CSR in .308 with 16” Barrel)
Materials: Titanium
Finish: Matte Cerakote
MSRP: $1095

Designed for elite US Military users, the THOR PSR over-the-muzzlebrake suppressor was engineered by AWC in partnership with Surgeon Rifles. The suppressor mounts over the included muzzle brake for a faster attachment method that maintains the accuracy and repeatability of traditional direct-thread suppressors.

Company: Tactical Solutions
Model: Ascent22
Caliber: .22LR, .22 WMR, .17HM2, .17HMR
Length: 5.9”
Diameter: 1.0”
Weight: 4.1oz
Factory Tested Sound Reduction: 38dB
Materials: 6AL-4V Titanium, 6061-T6 Aluminum, 304 Stainless
Finish: Matte Black Anodize
Website: www.tacticalsol.com
MSRP: $360.00

New for 2016 is Tactical Solutions lightweight and versatile rimfire Ascent22 suppressor. This user serviceable suppressor is designed with our patented split tube that makes cleaning the suppressor extremely easy. The Ascent22 features DiamonDyze™ coated baffles, a titanium thread adapter and blast baffle for increased heat and wear resistance. Please visit us at www.tacticalsol.com

Company: Surefire, LLC
Model: SOCOM556-RC2
Caliber: 5.56 mm
Length: 6.2”
Diameter: 1.5”
Weight: 17 oz.
Factory Tested Sound Reduction: 136 dB on Mk18 10.5” using 70g ammunition
Materials: High Temp Alloy & Stainless Steel
Finish: Cerakote (Black or Dark Earth)
Website: www.surefire.com
MSRP: $1095.00

The new and improved SureFire SOCOM556-RC2 Fast-Attach® suppressor is the most advanced 5.56 mm rifle suppressor ever made. Compact and lightweight, our SOCOM suppressor was selected for the Mk18 and M4 by US Special Operations Command as first among all competitors in the most extensive and rigorous suppressor evaluation in history. This test covered all aspects of suppressor performance, and SureFire beat every other entry. It has also received the USSOCOM official safety verification in support of fielding. Constructed of advanced high-temperature alloys and stainless steel, the SOCOM556-RC2 features a more advanced internal venting to reduce back pressure, reducing the suppressed cyclic rate and gas blowback on the operator. The new design also includes an integrated blast shield in the back section that increases durability. The patent-pending front-plate design along with proprietary improvement in gas-flow dynamics nearly eliminates first-round flash, a true technological breakthrough in this area. It also attenuates noise and dust signatures to an unprecedented degree. A new indexing system and computer controlled welding means this suppressor securely mounts to a SureFire muzzle brake or flash hider even more solidly than our previous models, and is easier to remove after extended firing since the index tab is in a low carbon-buildup area. Like all SureFire Fast-Attach models the SOCOM556-RC2 produces minimal, consistent shift in point of impact compared with the unsuppressed weapon.

Company: FA Machine Works
Model: Grenadier
Caliber: 9mm / 45 ACP
Length: 6.8” / 7.4” / 8.5”
Diameter: 1.375”
Weight: 9.9 oz. / 10.3 oz. / 11.4 oz.
Factory Tested Sound Reduction: 32db – 38db
Materials: Titanium
Finish: Cerakote (Black or FDE) or Natural
Website: www.famachineworks.com
MSRP: $905.00 / $930.00 / $980.00

FA Machine Works Grenadier centerfire pistol suppressors are composed of titanium. Their light weight and extreme durability create a revolution in the suppressor industry. TBT (Total Breakdown Technology) provides complete serviceability with common tools and user configurable baffles with patent pending GIT (Gas Indexing Technology) enhance the revolutionary design. The Grenadier 9, Grenadier 9 CQB, and Grenadier 45 suppressors have multi-caliber capability and select caliber full auto rating that provide from 32-38db sound reduction collectively.

Company: Sturm, Ruger & Co., Inc.
Model: Silent-SR 22 LR Suppressor
Caliber: 22 LR, 22 WMR, and .17 HMR
Length: 5.37”
Diameter: 1.06”
Weight: 6.3 oz.
Factory Tested Sound Reduction: 40 dB to 113.3 on Bolt Action .22 LR
Materials: Titanium, 17-4 Stainless Steel, & Aluminum
Finish: Matte Black Cerakote
Website: www.Ruger.com/Silent-SR
MSRP: $449

Ruger has built great threaded rimfire firearms for years, and now offers a great silencer to match. The Silent-SR™ features best-in-class materials and advanced design, resulting in a light, compact and quiet suppressor. Each piece snaps together to seal the baffles making it easy to disassemble and clean. The Ruger® Silent-SR™ utilizes a titanium tube, aluminum rear cap, and stainless steel threaded mount, baffles and front cap. Go to www.ruger.com for more information.

Company: Barrett
Model: AM30
Caliber: 30 and less
Length: 8.3”
Diameter: 1.5”
Weight: .775 lbs
Factory Tested Sound Reduction: -25-30 dB
Materials: Titanium Alloy
Finish: Cerakote
Website: http://barrett.net
MSRP: $1151

Model: AM338
Caliber: 338 and less
Length: 9.9”
Diameter: 1.75”
Weight: 1.29 lbs
Factory Tested Sound Reduction: -23-28 dB
Materials: Titanium Alloy
Finish: Cerakote
MSRP: $1530

Model: DC30
Caliber: 30 and less
Length: 8.3”
Diameter: 1.5”
Weight: .775 lbs
Factory Tested Sound Reduction: -25-30 dB
Materials: Titanium Alloy
Finish: Cerakote
MSRP: $1151

Model: DC338
Caliber: 338 and less
Length: 9.9”
Diameter: 1.75”
Weight: 1.29 lbs
Factory Tested Sound Reduction: -23-28 dB
Materials: Titanium Alloy
Finish: Cerakote
MSRP: $1530

Barrett is the world leader in large-caliber rifle design and manufacturing. Well-known for .50 caliber rifles, the company now produces rifles in .416 Barrett, .338 LM, .308 WM, .300 Win, .338 NM, 7mm Rem Mag, .260 Rem, 6.5 Creed, 5.56 NATO, 6.8 SPC and .300 Blackout calibers, and is a growing innovator in the design and production of accessories for long-range shooters.

Company: MackBrothers
Model: Helium
Caliber: 7.62
Length: 7”, 8” and 8.9” depending on configuration.
Diameter: 1.52 inches
Weight: 13 oz, 13.5 oz and 15 oz depending on configuration.
Sound reduction: 32 to 34 db
Materials: Titanium, 17- 4 stainless
Finish: Cerakote
Website: Macbros.com
MSRP: $1250.00

Mack Brothers was founded in 1997 to meet the needs of the business within the firearms community. We have supplied various military and firearms manufacturers worldwide.Having a serious interest in sound suppressors we have put together products that we are very proud of. Lifelong sportsmen of South Dakota we know what it takes for products to survive in the field.

The TranQuilo M308 was designed for precision .308 rifles with a 5/8-24 threaded muzzle (1/2-28 adapters also available). The internal design redirects blowback, reducing dangerous back-pressure materials and contaminants that typically encounter the user’s face. An open, angled, four-prong flash-reducing tip reduces muzzle flash. The Muzzle-Brake Adapter is also 17-4 Stainless Steel, featuring a dual-shouldered design seating the suppressor in perfect alignment to the bore, eliminating gas from escaping to the rear of the suppressor.

Company: LaRue Tactical
Model: TranQuilo Corto
Caliber: 308
Length: 6.125”
Diameter: 1.50”-1.75”
Weight: 16 oz
Sound Reduction: Not Available
Materials: 17-4 PH Stainless Steel and Incoloy A-286
Finish: 17-4 PH Stainless Steel
MSRP: $499.00

Model: TranQuilo M308
Caliber: 308
Length: 8.0”
Diameter: 1.50”-1.75”
Weight: 23 oz
Sound Reduction: Not Available
Materials: 17-4 PH Stainless Steel and Incoloy A-286
Finish: 17-4 PH Stainless Steel
Website: www.larue.com
MSRP: $699.00

The TranQuilo Corto is a shortened version of the M308, intended for use on 300 Blackout and 5.56 SBR’s (5/8-24 and 1/2-28 adapters available). Like the M308, the internal design redirects blowback, reducing dangerous back-pressure materials and contaminants that typically encounter the user’s face. The adapter is 17-4 Stainless Steel, featuring a dual-shouldered design seating the suppressor in perfect alignment to the bore, eliminating gas from escaping to the rear of the suppressor.

Company: Thompson Machine
Model: 30Ti
Caliber: 7.62mm
Length: 8.375”
Diameter: 1.48”
Weight: 17oz
Db Reduction: 31db
Material: Titanium and Stainless
Finish: Matte Ti
Web: www.ThompsonMachine.net
MSRP: $1095

The Thompson Machine 30Ti stands out in the centerfire rifle suppressor market. While Titanium construction has become common in recent years in sealed rifle suppressors, Thompson Machine set the 30Ti apart by designing it as a take-apart suppressor for easy cleaning and inspection of its Monocore baffle stack. Constructed of grades 5 and 9 Titanium and stainless steel, the 30Ti is quiet, light, rugged, and user-serviceable.