A*B Arms Polymer Picatinny Rails – M-LOK.

The A*B Arms Polymer Picatinny Rails – M-LOK are designed and engineered for military, law enforcement, and firearms enthusiasts. Compact and lightweight, the A*B Arms Polymer Picatinny Rails – M-LOK come in a three-rail combo pack, along with the individual four, five and seven slot configurations. All rail packs include the appropriate M-LOK hardware.

These rails are designed and manufactured in the USA by a veteran-owned company and feature a proprietary formula of heat stabilized nylon reinforced with high strength fibers. Each set includes M-LOK manganese phosphate coated t-nuts and 10 x 24 – ½-inch flat top screws.

MSRP: $20

abarms.com

DRD TACTICAL

DRD Ambidextrous Safety Selectors

The DRD Ambidextrous Safety Selectors are visual improvements over the standard. They offer improvements such as ambidextrous manipulation and are AR-15 and AR-10 compatible. The Safety Selectors come in two styles: Traditional, which offers one short and one long lever, while the Tactical has ribbed anti-slip levers. Additionally, the positive lock dovetail design ensures the product won’t loosen once installed. A pin-punch is also included for disassembly purposes.

MSRP: $59.99

drdtactical.com

MEOPTA

Optika5 2-10×42 PA Riflescope with Side Parallax Adjustment

The new Optika5 2-10×42 PA riflescope with side parallax adjustment from 10 yards to infinity delivers image focus at close ranges – a feature rimfire and air rifle enthusiasts will appreciate – and gives hunters and target shooters the ability to dial in the focus at longer ranges.Engineered to withstand heavy recoil, this newest addition to the Optika5 series is also designed for superb performance on centerfire, muzzleloader, and slug guns – making it an excellent choice for hunting a variety of species from varmints to big game.

The Optika5 2-10×42 PA features a 1-inch main tube, 5x zoom, zero-reset turrets, and advanced lens coatings for true color representation and unsurpassed. Meopta’s proprietary MeoBright lens coating delivers maximum light transmission per lens surface while suppressing reflection and glare. Meopta’s MeoDrop hydrophobic lens coating repels water and makes it easy to wipe off grease, skin oils, and dirt.

Capped hunting turrets are made of rubber-armored metal for the perfect combination of durability and functionality. The rear-facing magnification display allows for easy viewing of the power setting from behind the scope, and the zoom ring comes with a throw lever for quick adjustment of the power setting in the field or on the range. Windage and elevation adjustments are ¼ MOA. Two second focal plane reticles are available – Z-Plex or Z-Plus.

MSRP: $349.99

meoptasportsoptics.com

DRD TACTICAL

ARES Rifle Retention System

The DRD Tactical ARES is an Adaptive Retention System for rifles. This locking retention system is simple to operate and ensures rifles stay secure while offering an ergonomic, easy release. The ARES reduces fatigue and strain by spreading of the rifle’s weight across armor carriers or tactical vests while reducing undesirable movement allowed by slings. The product installs easily on any MOLLE system carrier and is compatible with AR rifle platforms and a wide variety of firearms with QD sling attachment points. Additionally, an integrated adapter ($24.99) is available separately as an upgrade to the end plate.

“We’re excited to be able to offer accessories which allow our customers to customize and optimize their firearms. We offer a premium brand and now we’re also able to offer the premium furniture and accessories to match,” said CEO Larry Williams. Williams continued, “It’s rewarding to be able to dive headfirst into projects like this which allow us to leverage our capabilities while enhancing the experience for our customers.”

MSRP: $124.99

drdtactical.com

APEX TACTICAL

Failure Resistant Extractors

Apex Tactical Specialties released two new models of its Failure Resistant Extractors, one for the SIG P320 that covers 9mm, .40 S&W and .357 SIG, and one for the slim Glock models G43, G43X and G48.

The Apex Failure Resistant Extractors are designed with a more robust extractor claw and improved geometry to produce a more durable extractor that delivers consistent extraction and a uniform ejection pattern. It’s machined from a billet of heat-treated stainless steel and the critical engagement surface features Apex’s custom extractor hook geometry. The extractors are black Melonite finished for enhanced durability.

MSRP: $59.95

apextactical.com

WARCAT TACTICAL

Appendix IWB Holster

Warcat Tactical, a new name in the firearms accessories and tactical gear market, launched its brand with the debut of the new Warcat Tactical Appendix Carry Holster. Designed with a minimalist approach and aiming for peak performance, Warcat Tactical has created a thinner, lighter, and stronger holster than the industry standard Kydex holsters currently available.

Using 3D modeling, precision injection molding, and specially blended polymers, Warcat Tactical holsters are made entirely in the USA for much less than competing brands. Warcat Tactical was born out of a necessity for a professional grade holster at an accessible price.

warcat.com

Adams Arms

AA19 Handgun

Adams Arms, industry leading pioneers of piston-driven AR platform firearms, announced the AA19, a performance-driven compact 9mm Luger handgun. The AA19 combines Adams Arms years of experience with handgun barrel and slide innovations with its mission of elevating firearm reliability and performance.  

“Adams Arms is known for its slides and barrels for custom handguns, and now we’ve brought all of our expertise into one complete pistol,” Steve Green, Adams Arms Vice President of Sales and Marketing said. “Our customers have been asking for an Adams Arms handgun for years, and now it is ready. The new AA19 incorporates design elements that refine its ergonomics and performance. Every detail on the new AA19 adds upgrades that maximize its potential for both EDC and competition.”

Specifications

• Enhanced front and rear cocking serrations
• •   Double undercut trigger guard
• •   Vickers Tactical Carry Trigger
• •   Ameriglo Defoor EDC sights
• •   Profiled and lightened slide
• •   Threaded 1:16in twist barrel
• •   Aggressive grip texturing
• •   1913 Picatinny rail
• •   Billet extractor
• •   OAL 7.6in
• •   Weight 1.26lbs.

The AA19 comes with two Magpul G19 magazines, a hardcase, and cable lock. The slide is cut for optics, and plates are plates available in all popular footprints, including the Trijicon RMR, Leupold Deltapoint, Shield RMS, Burris Fastfire 3, Vortex Venom/Viper, Vortex Razon, C-More STS. The gun is made in the USA and is backed by Adams.

MSRP: $999.99

adamsarms.net

Lil’ Native G-10 SLIPIT Knife

Spyderco’s remarkable SLIPIT family of knives combines the advantages of clip-carry and easy one-handed opening with the broad legal acceptance of the non-locking folder. One of the newest members of this unique breed is the Lil’ Native SLIPIT, which replaces the Compression Lock and back lock of the original model with Spyderco’s “notched-joint” mechanism. An enhanced version of a traditional slipjoint, this mechanism uses spring pressure to hold the knife’s full-flat-ground CPM S30V blade open but does not lock it. Peel-ply-textured G-10 scales ensure a non-slip grip, and a broad-based, four-position clip offers ambidextrous tip-up or tip-down carry.

 spyderco.com

BIANCHI

Allusion Series 126GLS Assent Concealment Holster

Bianchi, a brand of Safariland Group, announced the launch of the Bianchi 126GLS Assent concealment holster. This is the first Bianchi leather holster to incorporate Safariland’s advanced GLS (Grip Locking System) retention, offering multi-fit capability. The Model 126GLS Assent holster is an open-top design that combines leather with a laminate synthetic liner for durability, comfort, and additional functionality. The GLS retention automatically secures the gun when holstered and releases it upon application of the middle finger with a standard shooting grip for an intuitive and safe release. The 126GLS comes in six sizes to fit over 250 firearms.

safariland.com

SENTRY

Next Generation AR-15 Mag

After the acquisition of the HexMag brand in 2017, SENTRY Products Group expanded their magazine and on-gun accessory line. The most recent advancement is SENTRY’s Carbon Fiber AR-15 magazine, made from a proprietary carbon fiber composite blended with SENTRY’s PolyHex2 polymer, for durability and consistent performance. As with all HexMag products the new carbon fiber AR-15 Mag features the patented Hexture pattern for confident and positive grip, no matter the environmental conditions. A heat-treated stainless-steel spring eliminates corrosion and resists fatigue even while loaded for long periods of time. Customization can be done through HexMag’s True Riser system to create state-compliant 10-, 15- and 30-round configurations; and with the SENTRY HexID color identification system, the user can quickly identify caliber and ammo type through the coded safety system featuring high visibility followers and latch plate.

sentrytactical.com

GUNEYE

Model 360IR Smart HD Gun Camera with S3 Technology

GunEye’s Model 360IR Smart HD Gun Camera ​attaches to a gun rail with ​a unique Secondary Sighting System technology​ (S3 Technology)​ ​that connects it ​​directly to ​your​ ​smartphone ​wirelessly. The camera allows you to see your target safely behind cover while aiming your gun around a corner or wall before the target sees you.

The GunEye HD Model 360IR Remote Targeting Camera combines a camera, night vision, video/audio recording with the GunEye’s patented S3 Technology into a single mountable module. GunEye’s video and audio features provides a record of the engagement for any legal issues that may arise post-conflict. Its compact size will fit most rail systems on most guns and rifles. The camera offers app connectivity to smart devices through Android and IOS apps, connecting the camera to mobile devices via Wi-Fi or Bluetooth with live-stream video with auto or manual recording.

guneye.com

SAVAGE ARMS

IMPULSE Predator Rifle

Savage Arms announced the arrival of its IMPULSE Predator. The American-made IMPULSE Predator combines Savage accuracy with the speed of a straight-pull action serving as a platform for hunting carnivores. Beneath the action, IMPULSE Predator’s synthetic stock is finished in Mossy Oak Terra Gila. IMPULSE showcases AccuStock and is built with Savage’s AccuFit technology, which allows for easy adjustments to length-of-pull and comb height for an easily customizable fit. The user-adjustable AccuTrigger can be set as high as 6 pounds for those who stalk hunt, or as low as just 2.5 for hunters who shoot from longer distances, or anywhere in between.

savagearms.com

SAVAGE ARMS

IMPULSE Big Game Rifle

Savage Arms released its new IMPULSE Big Game rifles. These new American-made IMPULSE straight-pull rifles allow a shooter to maintain proper cheek weld after a shot and keep their target in their sights. The new straight-pull action is housed in a KUIU Verde 2.0 Camo stock, featuring AccuStock and comes equipped with Savage’s AccuFit, which allows for easy adjustments to length-of-pull and comb height to provide even the biggest big-game hunters with a tailored fit. The user-adjustable AccuTrigger can be set as low as 1.5 pounds.

savagearms.com

FURY ARMOR SYSTEMS

Ballistic Body Armor

Fury Armor Systems is the future of affordable ballistic body armor. Fury Armor Systems’ hard and soft armor plates are made of the latest in advanced composites and materials to assure users outstanding quality and performance. Every armor plate is extensively quality inspected and spot-tested. The ballistic armor is sent to independent U.S. testing facilities to ensure high standards and to make certain high levels of performance are achieved. In this unique time, and with so much uncertainty, it is becoming inevitable that protecting yourself and loved ones is of utmost importance.

furyarmorsystems.com

STANDARD MANFACTURING CO.

16721 Sporting Rifle

Standard Manufacturing’s 16721 sporting rifle chambered in 5.56 sports a 16-inch barrel with an 1:8-inch twist and has been updated to include a 13-inch M-LOK handguard. The 16721 has a direct-impingement gas system, standard charging handle, A2 flash hider muzzle, salt bath nitride carrier group and MIL-SPEC trigger. Additional specifications include a Rogers Super-Stoc, Mission First pistol grip and six-position carbine buffer tube. The 16721 measures 32 inches to 35.5 inches, weighs 6.4 pounds and includes two 30-round magazines.

stdgun.com

MPA AR9 PCC (Pistol Caliber Carbine)

MasterPiece Arms (MPA) has introduced the MasterPiece Arms AR9 PCC, designed by competition shooters for superior reliability and maximum accuracy and retains the familiar handling and controls of the AR platform. The MPA AR9 PCC lower receiver is compatible with the GLOCK-pattern magazines in 9mm. The new 7075 billet-machined aluminum receiver models also accept standard AR accessories like furniture, triggers, charging handles, buttstocks and optics and incorporate an integral trigger guard and flared magwell for fast reloading. Like all of its rifle products, MPA uses 416R SS Match-grade, button-rifled 1:10-inch twist 9mm barrels. These are hand-built precision instruments and not production components.

masterpiecearms.com

GEMTECH SUPPRESSORS

Integra 15-22

Gemtech Suppressors announced that it has released the Gemtech Integra 15-22, a new integrally suppressed upper receiver designed for .22 LR. Built for use exclusively with Smith & Wesson’s M&P 15-22 rifle, the Gemtech Integra 15-22 ships as a complete upper receiver group. The Gemtech Integra 15-22 features a 17-4 stainless-steel G-Core monocore permanently attached to a short, 9-inch barrel, resulting in a compact 17.5-inch over all barrel length. Both the core and barrel are enclosed in a 6061-aluminum outer tube with a durable matte black Cerakote finish. The Gemtech Integra 15-22 comes standard as a complete upper receiver group that includes the bolt and charging handle assemblies. The Gemtech Integra 15-22 should be used with subsonic ammunition for ultimate sound suppression.

gemtech.com

HIPERFIRE

X2S Two-Stage AR Triggers

HIPERFIRE announces its new X2S line of triggers with the company’s HIPERTOUCH® design. HIPERFIRE’s Cam-Over Toggle Engine and Radical Sear Mechanics technologies allow for reduced pull weights over MIL-SPEC without sacrificing critical hammer energy. This system also contributes to the Soft Start Lock-Up that reduces rifle “flinch” after the break. All of this is combined with user adjustable 3- to 4.5-pound pull ranges.

hiperfire.com

PRIMARY ARMS

SLX MD-20 Micro Red Dot Sight

Primary Arms has announced the release of its new micro red dot: the SLx MD-20. The SLx MD-20 improves on previous micro dots with an enhanced emitter, which provides an ultra-bright reticle with a 50,000-hour runtime on medium settings. The SLx MD-20 represents the latest technologies and innovations. The MD-20 goes one step further by integrating new technologies like AutoLive™, Primary Arms’ motion-controlled illumination system. The SLx MD-20 offers a durable aluminum body, 50,000-hour battery life, a zero-parallax lens and an ultra-bright emitter with night vision (NV) compatibility.

primaryarms.com

PULSAR

Trail 2 LRF XP50

Pulsar announced the release of the Trail 2 LRF XP50 (Trail 2). This riflescope has a 3-second startup and a 1024×768 AMOLED display, revealing every tiny detail in an eight-color palette for up to 2,000 yards. The Trail 2’s <40mK enhanced thermal sensor distinguishes the smallest temperature variations, operating in rain, fog or extremely cold conditions. The IPX7 waterproof-rated Trail 2 has a built-in camera and video recorder, plus Wi-Fi connectivity, enabling users to record their ventures. Other features include a digital zoom up to 8x, a wide-angle six-lens eyepiece and picture-in-picture mode. Additionally, the Trail 2’s laser rangefinder can identify an adult-sized object up to 1,000 yards.

pulsarnv.com

MPA Grenade

MasterPiece Arms (MPA), manufacturers of the MPA BA Rifles and Chassis Systems, introduced the MasterPiece Arms Grenade. MPA Grenades are chassis that pass MPA’s inspection in every way except cosmetically. Whether it be a small ding in the paint, a run-in with a laser that was having a slightly off day or some other minor cosmetic blemish, these chassis will still function with the same flawless perfection you expect from MPA, but with their own special flair.

The blemishes will all be considered mild and, in most cases, are difficult to identify without very close inspection. The small grenades lasered on them will mark them as the unique MasterPieces that they are. These are hand-built precision instruments and not production components.

masterpiecearms.com

AMERICAN BUILT ARMS COMPANY

MOD*X GEN III Chassis for Bergara B-14 Rifle

American Built Arms Company (A*B Arms brand) announced that their best-selling rifle chassis, the MOD*X GEN III Modular Rifle System™, is available for the Bergara B-14 SA. The A*B Arms MOD*X GEN III Modular Rifle System™ is a lightweight (3 pounds, 2 ounces), ergonomic, drop-in aluminum chassis. It serves as a modular foundation on which tactical accessories can be added according to the operator’s needs. Designed for Bergara B-14 Short Action, right hand.

abarms.com

PULSAR

Ultra-Powerful Axion XM30S Monocular

Pulsar announced the release of its elite thermal monocular, the Axion XM30S. Fitting easily into a hand or pocket, this monocular has a 1024×768 AMOLED display, 4.5x-18x magnification, 320×240 sensor resolution, 1,400-yard detection range and high optical magnification with 4x digital zoom. With a lightweight and rugged magnesium alloy housing, Axion XM30S also features video and photo recording, Stream Vision app capability and picture-in-picture zoom. The Axion XM30S also boasts an IPX7-waterproof rating and multiple color viewing modes.

pulsar-nv.com

ALIEN GEAR HOLSTERS

Springfield Hellcat OWB Paddle Holster

Alien Gear’s Springfield Hellcat Cloak Mod OWB Paddle Holster combines an ultra-durable holster base with a custom-molded retention shell. The holster base has a hard polymer rear plate, a spring steel flex plate and a thermoelastomer outer membrane that the user’s pistol sits against with a trigger guard retention bump to ensure stable retention while carrying. The flex plate bends when the pistol is inserted, acting as a retention assist. The hard base makes the holster durable, so it can be worn through any activity level. Users can adjust the fit via the mounting hardware, or even customize it with the included Parts Pack. Please note that the holster shell is custom-molded for the Springfield Hellcat and is only compatible with the factory slide. (The Cloak Mod OWB Paddle Holster is patent pending.)

aliengearholsters.com

DAVIDSON’S / WILSON COMBAT

Wilson Combat PPE Carbine

Davidson’s, a firearms wholesaler, has partnered with Wilson Combat to produce a Davidson’s Exclusive firearm. The Wilson Combat PPE Carbine is based on the WC-15 platform. Chambered in 5.56 NATO, the PPE has a 16-inch LE Profile match grade barrel, two-stage trigger, mid-length gas system with low-profile gas block and a .5×28-inch threaded muzzle with Q-Comp muzzle device. Other features include: forged upper (flat-top) and lower receiver with tactical trigger guard and Wilson Combat 10.4-inch M-LOK rail.

davidsonsinc.com / wilsoncombat.com

GLOCK, INC.
G45

GLOCK, Inc. announced a new addition to the 9X19mm family of pistols featuring the latest in design and engineering seen in the 5th Generation of GLOCK pistols. The GLOCK 45 combines the fast handling of the GLOCK 19 compact-sized slide with the full-size frame as a compact crossover. us.glock.com

MAGPUL
Bipod for M-LOK

The Magpul Bipod for M-LOK offers serious strength and versatility at a price that provides unmatched value. The lightweight (just over 11oz) MIL-SPEC hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”. An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full-tilt functionality. magpul.com

SIGHTMARK
Core Shot A-Spec FMS Reflex Sight

The Core Shot A-Spec FMS Reflex Sight bridges the gap between a full-sized and mini red dot sight. The mid-sized red dot sight delivers elite performance and accuracy in recreational, professional and competitive environments for avid shooters. Made out of aircraft-grade aluminum for a dependable compact, lightweight housing and includes external battery compartment for easier access to the battery. The Core Shot Includes a riser mount to work effectively on ARs. sightmark.com

ELITE SURVIVAL SYSTEMS
GUARDIAN Concealed Carry Backpack, #7722

The unique design of the GUARDIAN EDC Backpack combines the versatility of a modular pack with the internal features of a daily carry pack, complete with a dedicated concealed carry compartment. The CCW compartment has an adjustable, movable holster and can be accessed from either side of the pack. The pack’s comfortable yoke system carry, numerous organizational pockets and compartments and dedicated laptop compartment round out the Guardian’s features for a perfect every day pack. Optional backpack armor insert also available. elitesurvival.com

TANGODOWN®
AK BATTLEGRIP® BG-AK

TangoDown® Inc. is pleased to announce the latest addition to the lineup–the AK BATTLEGRIP® (BG-AK). The BG-AK is made from the same durable material as the entire BATTLEGRIP® line. It offers a comfortable ergonomic design, aggressive non-slip texture and patented internal storage for essential spare parts or optic batteries. The grip fits all true AK-pattern rifles. TangoDown.com

SAVAGE ARMS
Rascal Target

The industry’s safest micro rimfire has come of age. The Rascal Target is built for accuracy and adaptability, thanks to a precision hardwood stock, heavy 16 1/8-inch barrel, one-piece Picatinny rail and threaded (1/2-28) muzzle. Like the original Rascal, the single-shot rifle cocks by lifting the bolt and unloads easily—without pulling the trigger. The design also builds superior shooting skills thanks to full-size rifle features, including Savage’s user-adjustable AccuTrigger™ system. The platform offers far better safety, functionality and accuracy than competing designs. savagearms.com

TUFFY SECURITY PRODUCTS
Model 343 Under Rear Seat Lockbox

Tuffy Security Products has unveiled its Model 343 Under Rear Seat Lockbox for 2014 to current Chevy Colorado/GMC Canyon Crew Cab pickup trucks. The Model 343 is a full-width, form-fitting lockbox designed to mount under the rear seats of the pickup.

Comprised of powder-coated, 16-gauge steel, the security lockbox features more than 2,100 cubic inches of storage space which is further protected by Tuffy’s patented Pry-Guard locking system with a 10 tumbler double-bitted security lock. Tuffy Security also incorporates an exclusive Pin-Lock hinging system with built-in weather seals to further protect the contents of the box. The lockbox is accessed by flipping either or both the rear seats up and opening one or both lids. The lid under the single seat has a center lock while the lid under the double seat has two locks. The Model 343 mounts into the vehicle by fastening to the original OEM hardware and does not require any drilling. tuffyproducts.com

DEZ TACTICAL ARMS, INC.
DTA-10-GEN2 Rifle

Introducing the newest large frame AR rifle from DEZ Tactical Arms, Inc. The DTA-10-GEN2 rifle features a DEZ match-grade series barrel, individually tested and guaranteed to produce sub-MOA accuracy. Upper and lower receivers are milled together as a matched set and serialized. All rifles are fully customizable, including barrel length, handguard length, trigger, Cerakote and other accessories. Available in .308 caliber (16”, 18”, 20”, 24”) and 6.5 Creedmoor (22”, 24”). DEZTacticalArms.com

VIRIDIAN WEAPON TECHNOLOGIES
V310 Illuminator

The V310 Long Range Illuminator is the ultimate access for night-time hunting. Illuminators deploy high-intensity, next-gen LED technology to throw a brilliant, tactical-grade light beam far downrange. Undetectable green, red or infrared beams paint distant targets in total darkness, without spooking your quarry, straining your eyes or blowing a paycheck on high price gear. The brilliant beam lets you find a trail or disorient an opponent instantly. viridianweapontech.com

F.W. ARMS
Best Bench Mount

The Best Bench Mount attaches to a shooting bench using a heavy-duty clamp that quickly adjusts for bench surface thicknesses from 3/4 to 7-1/2 inches. Once secured in place, the Best Bench Mount easily adjusts to lock in the field-of-view of any target. The scope mounting plate is set just 4 inches above the bench surface, but it can be moved in seconds to its maximum height of 13 inches. The vertical (up/down) tilt of the scope mounting plate (and scope) allows for 1,600 minutes of total elevation adjustment via the threaded tilt adjustment knob. The F.W. Arms Best Bench Mount is precision-machined 304 stainless steel, brass alloy and hard-coat anodized aircraft grade aluminum making it an all-weather tough piece of equipment.

An optional mast extension can be threaded into the main mast adding 18 inches of height for offhand shooting using a bench for scope support. fwarms.com

ASHBURY PRECISION ORDNANCE MFG.
SABER® M700™ Tactical Rifle

Ashbury Precision Ordnance Mfg is expanding its value line of sport utility SABER® M700™ Sport Utility Rifles with the new SABER M700 Tactical Rifle chambered in the venerable .308 Win and immensely popular 6.5 Creedmoor cartridges. SABER M700 rifles are manufactured using hand-select Remington Model 700 barreled actions mated with specially configured variants of the patented SABER modular rifle chassis. Every SABER M700 rifle is built entirely in the U.S., handcrafted by proud American craftsmen and veteran US Military Armed Service members in Remington’s factory in Alabama and Ashbury Precision Ordnance’s plant in Ruckersville, Virginia. ashburyintlgroup.net

HERA Arms
HFGA (HERA Front Grip Adjustable)

The new HFGA (HERA Front Grip Adjustable) by HERA Arms is a multi-positional front grip which can be used on any firearm with a Picatinny rail. Shooters can easily adjust the level of support based on their needs. The HFGA will be available as of August 2017. MSRP: $39.00 www.hera-usa.com

LONG RANGE ARMS
Send iT Level

Long Range Arms’ new “Send iT” electronic shooting level eliminates the need to remove your eye from the reticle, making it easily 3-5 seconds faster than mechanical levels. The Send iT level reads your rifle’s cant whether it is mounted vertically or horizontally. Additionally, the Send iT level has 5 cant sensitivity settings, quick rheostat adjustments for day and night operations, battery check, tool-less battery cap and is powered by 1/3 N battery, sleep mode and is water resistant. MSRP: $225.00 www.LongRangeArms.com

SPYDERCO
C41CFFP5 Native 5

The defining feature of this Native 5 is its fluted carbon fiber handle. Meticulously machined from solid carbon fiber, its scales offer a stunningly beautiful appearance as well as a subtle non-slip texture. They are fitted with four sets of threaded stainless steel inserts to allow attachment of a four-position pocket clip that supports left or right-side tip-up or tip-down carry. The knife has a high strength, back-lock mechanism. The Native 5’s blade is also unique in that it is crafted from premium CPM S90V stainless steel. This advanced particle metallurgy steel is enriched with a high vanadium content that favors the formation of hard vanadium carbides instead of chromium carbides. MSRP: $359.95 www.spyderco.com

RUGER
LCRx

This newest addition to the LCRx family features a 3-inch barrel, .22 LR chambering, a fully adjustable rear sight, full-size smooth Hogue Tamer grip, polymer fire control housing, aerospace grade aluminum monolithic frame and an extensively fluted stainless steel cylinder. This new model expands the diverse LCR family, which features a variety of calibers and configurations. www.Ruger.com

V6 INDUSTRIES
V6 Muzzle Brake

V6 Industries, manufacturers of the V6 Muzzle Brake, is proud to introduce its revolutionary muzzle brake concept to the shooting market. The V6 design takes full advantage of the escaping gases and directs those forces at exactly the perfect angle and precise direction to counteract 100 percent rise and reduce 70 to 80 percent recoil. The V6 Muzzle Brake reduces muzzle rise to virtually zero, no matter what the shooter puts through the gun. It is ideal for the competitive shooter, hog hunter or anyone desiring rapid acquisition and instant follow up shots. www.V6Brake.com

COPPER BASIN
Takedown Firearm Backpack

The Takedown Firearm Backpack is compatible with variety of firearms including the following makes and models:

Alaskan Lever Action Takedown Rifles
AR & AK Pistols
AOW Shotguns / Compact Shotguns
Century Arms AK Pistols
Century Arms Draco Pistols
Henry Survival AR-7 Rifle
Kel-Tec Sub-2000 Rifles
Kriss Vector Gen II SDP and SBR
Ruger 10/22 Takedown Factory Rifle, 22 Charger & 22 Charger Takedown
SIG MPX SBR, MPX-K SBR, PMPX
Zenith Firearms MKE Z-5RS, MKE Z-5P, MKE Z-5K
MSRP: $99.99
www.copperbasingear.com

DOUBLESTAR CORP
Drakon Blade

DoubleStar Corp, manufacturers of high-quality, US-made AR components, rifles and pistols, is proud to announce the release of its new Drakon Blade.
Coated in DoubleStar’s Dragon Hyde DLC coating, the Drakon Blade was created with one thing in mind: to wreak havoc. The scalloped beveled edge allows this blade to slice through the heaviest textiles with ease. The finger loop ensures secure retention throughout the cut. The Drakon comes with a Kydex sheath with Tek Lok. It’s made in the US and comes with a warranty. MSRP: $179.99 www.star15.com

STEINER eOPTICS
Dual Beam Aiming Laser Advanced4 v2

New advanced DBAL-A4 with four functions: visible laser, IR laser, IR illuminators and white light illuminator. High/low modes. Restricted and commercial models available.

Overall features:
• Spot and wide field of view (Flood) IR Illumination Modes
• Fully adjustable windage and elevation
• Available in low power and restricted-military configurations
• Integrated push-button switch and remote cable pressure-pad switch
• Activation—tap and release for momentary activation; tap twice for 5-minute continuous ON
• Attaches to any Picatinny rail using secure quick disconnect mount
• Includes remote cable ports for paddle switch activation and visible laser/white light override

www.steiner-defense.com

YANKEE HILL MACHINE
Suppressor Covers

The new YHM Suppressor Covers are a valuable accessory for controlling heat mirage that can interfere with your sight picture through optics or iron sights, we all know suppressors can get very hot after just a few rounds through the can. The YHM suppressor covers will work as a safety measure to act as a barrier in case a hot suppressor were to make contact with your gear, skin or environment.
Available in 6 inches or 8.5 inches: 6 inches YHM-HTP-6, 8.5 inches YHM-HTP-85. MSRP: $95.00 https://yhm.net

INTERORDNANCE
M214-NANO

We are proud to be introducing the newest innovation to our lineup.

Our M214-NANO’s are currently shipping with an easy method of installation for attaching after-market pistol braces. These braces have gained popularity over the last few years to increase stability and accuracy on pistols. The M214-NANO has a standard AK47 stock tang installed that allows the installation of these aftermarket accessories. This model is extremely popular with Military and Law Enforcement for its versatility and compact size, while also being available in a full auto SMG configuration.

The M214-NANO has a 7-inch barrel with a 18.5-inch overall length. It is one of the shortest and most powerful AK47 pistols on the market today. We are proud to manufacture our AK-47’s right here in the USA, and we stand behind them with a lifetime warranty. www.ioinc.us

NIKON
Low-Light BUCKMASTERS II Riflescope

Nikon has announced its newly introduced BUCKMASTERS 3-9×50 Matte BDC riflescope. This large-objective-lens addition to the BUCKMASTERS II line-up offers its owner the brightness and clarity of Nikon’s Fully Multicoated lenses and the long-range aiming simplicity of the company’s BDC reticle. The BDC reticle is most effective when optimized for an individual cartridge and load with Nikon’s Spot On Ballistic Match Technology-available as a free app or online program. Sighting-in the new 3-9×50 is made easy with precise ¼-inch@100 yards reticle adjustments and Spring-Loaded Instant Zero-Reset turrets, which can be returned to the zero-mark after sight-in for enhanced confidence. The BUCKMASTERS II 3-9×50 also has a fixed 100-yard parallax setting, generous eye relief and is waterproof, fogproof and shockproof. NikonSportOptics.com

CMMG
MkG45 GUARD

CMMG has announced the release of the MkG45 GUARD—a new AR15 rifle chambered in the iconic .45 ACP caliber. The GUARD is offered in five different configurations, operates on CMMG’s new, patent pending Radial Delayed Blowback system and is fed from Glock magazines.

While the straight blowback system found on most pistol-caliber AR carbines utilizes a non-rotating bolt assembly, the Radial Delayed Blowback system used on the GUARD has a bolt carrier group (BCG) that appears similar to that found on a direct impingement AR15 but operates completely differently. The rotating bolt is the key to the Radial Delayed Blowback system. It is the act of the bolt being forced to rotate and unlock that slows down the BCG just enough to safely cycle .45 ACP while keeping the BCG and buffer lighter than 9mm AR15’s.

The MkG45 GUARD comes with one 13-round factory Glock 21 magazine. For optimal reliability, CMMG recommends using factory double-stack GLOCK .45 ACP magazines. Bolt weight kits will be sold separately for those who wish to fine-tune the GUARD for +P ammunition or suppressor usage. MSRP: Prices vary depending on model www.cmmginc.com

APTUS Weapon System

DRD Tactical | www.drdtactical.com

DRD’s new APTUS weapon system in 5.56 Nato or 300BLK calibers is designed using their patented quick change barrel and internal recoil system on a direct gas-operated rifle.

With Magpul folding stock, the weapon can be fired with the stock folded unlike standard AR platforms. This allows the operator to quickly change the barrels to fit the mission. All lower parts and some BCG parts are M4 compatible. It can go from PDW to DMR in less than 1 minute.

BY17SOR2 CARA CARA 2

SPYDERCO | www.spyderco.com

The all-new Cara Cara 2 Rescue features a high-visibility, orange-injected, molded FRN handle. For emergency cutting on a budget, this knife teams a Cara Cara 2 lightweight handle with a sheepfoot rescue blade.

Blade Steel: 8cr13mov stainless steel
Blade Grind: Hollow
Lock Type: Back lock mechanism
Handle Material: Fiberglass-reinforced nylon
Carry: 4-position hourglass pocket clip

STRYKE-2 Compensator

556 Tactical, LLC | www.556tactical.com

556 Tactical STRYKE-2 Compensator is available in 5.56 and 7.62. This new muzzle device will dramatically reduce muzzle rise as well as felt recoil, allowing for faster target acquisition. Three upward ports ease the side felt concussion and increasing target-acquire speed. With their STRYKE Face design this can be used for breaking a window, stamping a zombie on the forehead or tenderizing your favorite meat for grilling!

Dagger II Silencer

GEMTECH | www.gemtech.com

The updated GEMTECH DAGGER II is an all Titanium suppressor designed for semi-auto 18-inch 300WM precision rifles. The DAGGER II is the everyman silencer; it can be used on all lesser calibers, and its extreme strength lends itself for use on 12-inch .308 SBRs. This suppressor is held to the exacting SOCOM standards and passes with flying colors. The new feature allows ease of mounting and even has a predrilled pin hole for permanent fixture to short barrels.

H&K 3-Lug

GEMTECH | www.gemtech.com

GEMTECH World Class Silencers is happy to announce a new product to increase the compatibility of their 45 ACP silencers. The new H&K 3-Lug mount screws directly into GEMTECH’s Blackside, GM-45 and LUNAR Silencers for quick mounting on the standard 3-Lug mounts—popular on MP5s and modern pistol caliber carbines.

Cold Steel Frenzy

COLD STEEL INC. | www.coldsteel.com

The new for 2017 Cold Steel Frenzy draws inspiration from ancient Japanese Kabutowari, with a noticeably thick spine, slender blade, needle-sharp piercing point and long flat cutting edge. The Frenzy was designed by award-winning custom knife maker Andrew Demko and weighs just less than 6 ounces, making it thin and flat enough to comfortably carry. Premium American CTS XHP-powdered steel was chosen for the Frenzy’s 5.5-inch blade, and the knife is available in three different dual-tone G10 handle options: blue/black, OD green/black or grey/black.

Renegade Plus SPR

POF-USA | www.pof-usa.com

The Renegade Plus series embodies everything a direct impingement AR-15 can be. The initial offerings quickly became popular among shooters who push the limits of the .223/5.56 NATO cartridge. This extended range application warranted a new addition to POF-USA’s Renegade line up. New for 2017, POF-USA releases the Renegade Plus SPR. It still boasts the upgraded features the Renegade Plus is known for, such as a nine-position adjustable gas block, roller cam pin, heat sink barrel nut and more, but with an 18.5-inch barrel and adjustable Luth-AR MBA stock. These upgrades go well above mere aesthetics often found in rifles today.

NAS3 9mm Luger Cases

Shell Shock Technologies, LLC
www.shellshocktech.com

Shell Shock Technologies is an early stage technology and manufacturing company focused on developing innovative case technologies for the ammunition industry. Shell Shock is a component manufacturer supplying its lightweight NAS3 shell cases to the shooting sports market, as well as to U.S. and foreign ammunition manufacturers. Shell Shock’s NAS3 cases are 50% lighter than brass, give more consistent round-to-round performance and can be picked up with a magnet. 9mm Luger cases are immediately available (5.56mm cases available soon), with more calibers coming later in 2017. All Shell Shock’s cases are designed and manufactured in the U.S.

Spektre Inside-the-Waistband (IWB) Holster

HIGH THREAT CONCEALMENT (HTC)
www.Highthreatconcealment.com

High Threat Concealment’s (HTC) new Spektre Inside-the-Waistband (IWB) Holster is a no-compromise solution for those who want to comfortably conceal a fighting-sized handgun for their everyday carry. The Spektre provides maximum concealment and a comfortable custom-engineered fit for your weapon that can be worn strong-side IWB or in the appendix (AIWB) carry position. Each holster can be configured with one of three available attachment systems to better fit your preferred style of carry.

The Spektre is currently available for most popular semi-auto pistols. For most double-stack pistols, the Spektre will accommodate most popular pistol-mounted red dot optics. Shooters are also able to adjust the fitment and tension of the holster to suit their individual preference, using a custom tensioner that precisely adds or removes pressure from the holster’s capture feature. All holsters have an open bottom to enhance comfort and permit the use of after-market and threaded barrels.

CORE RIFLE SYSTEMS NEW FOR 2017 CORE 6.5 GRENDEL RIFLE PLATFORM

The 6.5 Grendel rifle is now available in two CORE platforms, the new TAC 6.5, and all the HARDCORE models. As part of this the 6.5 Grendel is also offered in both 18” and 20” CORE Rifle System barrel lengths.

The 6.5mm Grendel design goal was to create an effective 200-800 yard AR-15 magazine length loaded cartridge for the AR-15 platform that surpassed the performance of the native 5.56 NATO/.223 Remington cartridge. Constrained by the length of the 5.56mm NATO round, the Grendel designers decided to use a shorter, larger diameter case for higher powder volume while allowing space for long, streamlined, high ballistic coefficient (BC) bullets. Firing factory-loaded ammunition loaded with bullets ranging from 90 to 129 grains (5.8-8.4 g), its muzzle velocity ranges from 2,500 ft/s (760 m/s) with 129- and 130-grain (8.4 g) bullets to 2,900 ft/s (880 m/s) with 90 gr (5.8 g) bullets (similar in velocity to a 5.56mm 77-grain (5.0 g) round).

The case head diameter of the Grendel is the same as that of the parent case, the .220 Russian, the 7.62×39mm and PPC cases. This is larger than the 5.56×45mm NATO, thereby necessitating the use of a non-standard AR-15 bolt. The 6.5 Grendel has proven to be highly effective as both a competition shooting round and a hunting round. Because of its flat trajectory the round has been successful in hunting small to large game including Bear and Elk. For more information about Core Rifle Systems, visit www.coreriflesystems.com.

ELITE SURVIVAL SYSTEMS SHIFT 2-TO-1 POINT TACTICAL BUNGEE SLING

Single-point slings have increased in popularity over recent years due to ease of use and the fact that they often contain an internal bungee layer. Bungee provides a measure of neck relief as well as stretch and resistance when in a shouldered position to help you remain stable. The new SHIFT 2-to-1 Point Tactical Bungee Sling from Elite Survival Systems not only contains an internal bungee layer, but allows you to instantly convert from the more stable two points of attachment to a versatile single point attachment sling with the snap of a hook. This versatility not only allows you to choose your style of attachment on any particular weapon, but allows you to use the sling on a greater variety of weapons and helps reduce the number of slings you may need in your kit. The SHIFT sling comes standard with both HK-style snap-hooks and MASH attachment hooks for even greater versatility. It offers a quick-ditch option via the side-release buckle and has a large degree of adjustment to fit comfortably over armor and gear. The sling is made in the USA and carries the Elite Survival Systems lifetime guarantee.

ELITE SURVIVAL SYSTEMS VERSATILE SIDEWINDER BATTLE BELT

The new Sidewinder™ Battle Belt from Elite Survival Systems provides a comfortable and stable platform for attaching more combinations of equipment to your favorite belt. The battle belt increases your carrying capability with MOLLE attachment points, allowing you to haul a significant amount of various gear comfortably on the waist. The Sidewinder’s segmented PALS panels allow the user to wind a belt through the panel segments and select between MOLLE attachment points for modular pouches and gear or belt mount attachment for standard holsters and pouches. The belt is fully padded with a nylon mesh lining for increased ventilation, and a non-slip panel on the inside of the battle belt helps keep the system stable and secure during activity. Elite Survival Systems makes the Sidewinder™ in the USA and offers a lifetime guarantee. To see complete product lines, visit online at www.elitesurvival.com or request a catalog toll-free at 866-340-2778.

HOGUE INC. ANNOUNCES LASER-ENHANCED GRIPS FOR SMITH & WESSON K/L AND J FRAME REVOLVERS

(Editorial correction from SAR V21N5) Hogue, Inc. is proud to announce the newest additions to their growing line of Laser Enhanced (LE) Grips. Revolver grips for Smith & Wesson’s round butt K/L and J Frames are now in stock. “For years our customers have been asking for Hogue Grips with lasers,” said LE Grip designer and managing partner Jim Bruhns. “We have expanded our line of Hogue LE Grips to include models for Smith & Wesson K, L and J Frame owners in direct response to customer demand.”

Hogue’s LE Grips are the first handgun laser sighting system on the market based on a fully programmable, digitally controlled microprocessor circuit. Hogue’s designers capitalized on the advantage by programming three operating modes (steady, flashing or stealth target) and four laser brightness levels into the LE Grip’s circuit. They also tapped into sophisticated power management routines to ensure long life from two common CR-2032 batteries hidden under the grip on the non-laser side–an important design feature enabling battery changes that won’t take the laser out of zero. Each LE Grip is bore-sighted at the factory while fine windage and elevation adjustments are accessible via small set screws. All of the Hogue LE Grip’s programming features are accessible via pressure-sensitive programming buttons.

The Hogue LE Grips for S&W revolvers are truly unique; the company’s engineers embedded the system’s 630-670nm

Hogue LE Grips are manufactured in their family-owned and operated USA facilities under the direct supervision of the Hogue family.

HOGUE HANDALL BEAVERTAIL GRIP SLEEVES

The new grip sleeves are designed to fit specific polymer pistols now on the market. “Polymer pistols do not have removable grips that you can simply replace,” said grip designer Matt Hogue. “The solution for many of these pistols is our new HandALL Beavertail Grip Sleeves.”

The Beavertail Grip Sleeve line has been engineered with models for precision fits on specific firearms. The initial offerings in this series have sleeves designed for perfect fits on three sizes of polymer firearms. The first offering precisely fits Smith & Wesson’s M&P 9mm and 40 Shield and Ruger’s LC9. The second sleeve fits Glock’s 42 and 43. The final sleeve is designed for Smith & Wesson’s M&P 45 Shield and Kahr Arms’ P9, P40, CW9 and CW40.

While each sleeve has been created for a precise fit on specific polymer framed firearms, they also alternatively fit many other similarly sized firearms with a fully functional and aesthetic fit. “These sleeves also provide a very nice fit for many pistols that may not have any other alternative available on the market,” said Hogue.

The Beavertail Grip Sleeves are installed by slipping them over the frame of the firearm until seated into perfect position. Once installed, the HandALL sleeve provides a single finger groove for instinctive handling of the firearm. The finger groove leads into a gentle palm swell that has been carefully designed to fit naturally in the hand. The beavertail built into the grip sleeve rises high along the back strap of the frame giving full rubber contact with the hand allowing a higher hand-placement on the grip without the fear of the slide biting the skin between the thumb and the trigger finger. In addition to protection and comfort, the beavertail also cushions the hand during recoil.

The HandALL is built from a long-lasting durable thermoplastic elastomer compound. This rubber ages very gracefully and keeps a firm, tacky feel throughout the life of the grip. It will not harden, split or crack with age or usage. The grip sleeve is textured with Hogue’s familiar Cobblestone texture, a series of small circular bumps that provide an efficient non-slip, non-irritating grip on the rubber. Hogue’s HandALL Beavertail Grips Sleeves have an MSRP of $9.95 for black and $10.95 for OD green, flat dark Earth, pink and purple.

Hogue grip sleeves are manufactured in their family-owned and operated facilities under the direct supervision of the Hogue family.

Hogue, Inc. supports local dealers and encourages customers to purchase Hogue products locally. For more information on these products, please call Hogue directly at 1-800-438-4747 or visit www.hogueinc.com to find a Hogue dealer near you.

KESTREL CONNECTED ECOSYSTEM LiNK COMMUNICATIONS WIRELESS PROTOCOL

Getting an accurate firing solution requires detailed information about the bullet and gun, the target and the environment. For a shooter to gather all that data, compute a solution and then dial their hold to take a shot is time-consuming and introduces opportunities for mistakes. Kestrel’s engineering team has created the LiNK communications protocol for connecting the components of a ballistics system. With LiNK, laser range finders, scopes and smart devices can all be connected to the Kestrel, replacing button presses on multiple devices for seamless, accurate shooting solutions when and where you want them.

SPYDERCO MANIX 2 BACK LOCK

The all-new Manix 2 Back Lock combines the proven design and ergonomics of the best-selling Manix 2 with an ultra-smooth, high-strength back lock mechanism. Its other unique features include lightweight linerless handle construction, fine-textured G-10 scales, a stainless steel back spacer and a four-position pocket clip. Four sets of threaded stainless steel inserts in the thick, hand-filling handle provide solid anchors for the clip and allow it to support left- or right-side tip-up or tip-down carry.

LONE WOLF DISTRIBUTORS BROWNING 1919A4 MACHINEGUN

Original Browning 1919A4 Machinegun rebuilt to semi-automatic configuration. Built on original US GI parts that were modified by Israeli Military industries to operate in .308 caliber. All guns are hand disassembled, inspected, reworked and refinished. All have been test fired and proven reliable. Built by John McGuire master gunsmith for Lone Wolf R&D LLC. John is the best in the 1919 business and his reputation speaks for itself.

• Marked to resemble original US GI engraving.
• Assembled using KMP side plate, trigger & sear.
• Meets military specifications.
• Includes 100 ammo links.
• Average shipping is ~$100.00, UPS surcharges may apply.
• All 1919A4’s are 50-state legal.
• Must ship to FFL.

FN USA ANNOUNCES NEW M249S PARA IN BLACK AND FDE

FN America, LLC, is pleased to announce the latest addition to the FN Military Collector Series—the semi-auto FN M249S Para or Paratrooper model, originally developed for airborne troops. Building on the company’s unique tradition of offering semi-automatic variants of the most popular military-designed firearms, the rifle will join the full-size FN M249S Standard and the FN 15 Military Collector M4 and M16. The M249S Para is the fourth in their series of classic, semi-automatic FN military rifles, and like the Standard, the Para is authentic to the last possible detail. You’ll notice only two major differences between the semi- and full-auto versions—the barrel length and reconfigured internal components to change the rifle’s operation from open-bolt to closed-bolt. Authenticity was critical in this series, and they changed as little as possible. The rifle features a machine-gun-grade, 16.1-inch, cold hammer-forged barrel, closed-bolt for semi-automatic-only operation, classic M249 flip-up feed tray, integrated steel bipod, robust gas-piston system and the iconic telescoping and rotating buttstock, making it lighter and more compact. The rifles will be available in either black or Flat Dark Earth (FDE). The guns will accept either 30-round M-16 style magazines or 200-round plastic ammo boxes. For more information you can contact FN America at www.fnamerica.com.

BATTLE RIFLE COMPANY INTRODUCES NEW CUTLASS MARITIME RIFLE

Battle Rifle Company has announced its all-new 2017 BR4 Cutlass rifle. The Cutlass is based on Battle Rifle Company’s best-selling Spectre Rifle and is specifically designed for MARSEC (Maritime Security) operations and shipboard usage. The Cutlass is built with care to ensure long-lasting life in extreme conditions. Its extended rail and low-profile gas block allow for more accessories to be installed, making it well-suited for shipboard, coastal and all-weather operations. They built the Cutlass so that no direct ferrous, metal-to-metal contact is made throughout the entire rifle, ensuring corrosion-free operation, even after months at sea. This rifle is perfect for shipboard operations, both coastal and riverine. If you live or work on the water, this gun is perfect for you! Additionally, Battle Rifle Company is introducing a new color for 2017. The MARSEC rifles will be available in the all-new Battle Rifle Ocean Blue—a marine gray-blue which provides a great contrast for this special rifle. For more information on Battle Rifle Company, visit www.battleriflecompany.com.

GEMTECH INTRODUCES NEW SUPPRESSORS FOR 2017

Gemtech has just introduced its first new suppressors for 2017. The first is their new LUNAR-45. The Gemtech Lunar-45 is the culmination of decades of silencer innovation. They have created the lightest and quietest modular .45 suppressor available that is able to be taken apart and cleaned. The Lunar-45 is crafted from military-grade aluminum and titanium for the utmost in durability and strength. The modular suppressor is available in either a short length (6.9 inches) or a long length (8.5 inches), depending on the shooter’s needs. The short suppressor is said to have a 136 dB noise reduction, and the longer version has a 129 dB reduction. Gemtech offers a variety of mounting options for the Lunar-45 allowing it to be used with a variety of platforms and calibers. The new suppressor is also full-auto-rated.

The other new suppressor is their INTEGRA, which is an AR-15 integrally suppressed upper receiver. The new suppressed upper will be available in both 5.56 and 300 BLK. Gemtech has teamed up with NEMO Arms to create the smallest and easiest-to-maintain package the shooting world has ever seen. The INTEGRA utilizes Gemtech’s proven G-Core Technology that is removable, cleanable and replaceable while still bringing the best sound reduction of any similar-sized package. The NEMO Arms patented gas block eliminates blowback, making this upper more comfortable to shoot. The barrels of both units offer either 10- or 10.5-inch lengths with integrated lengths of 16.1 inches overall. Information on all of Gemtech’s suppressors can be found at www.gemtech.com.

MEOPTA INTRODUCES NEW MEOTAC 3-12×50 RD

Meopta is pleased to introduce its newest tactical riflescope—the 34-mm MeoTac 3-12×50 RD.Designed for use on assault rifles, the MeoTac 3-12×50 RD is an excellent scope for medium-range engagement and is engineered to meet the needs of armed forces, security details and tactical shooters worldwide. This scope features MeoLux, Meopta’s most advanced lens coating. MeoLux, combined with Schott glass and expert design, enables 99.8% light transmission per lens surface allowing users to see better and farther in the most challenging light. The solid 34-mm, aircraft-grade aluminum tube allows for expansive windage and elevation ranges of 55 MOA and 100 MOA respectively with click adjustments of 1/3 MOA. The illuminated MilDot 3 RD reticle, located in the first focal plane, enables use of the range-finding elements of the reticle on any power setting. The new MeoTac 3-12×50 RD also features precision tactical mil-mil turrets with a large grip, easily distinguishable positive clicks and a zero-stop function. The side-focus parallax adjustment ranges from 27 yards to infinity, and the integrated illumination control is also located on the side of the center of the scope, making adjustment in the field quick, easy and convenient. The RD illumination system features a highly defined illuminated red dot reticle with 16 reticle intensity settings for all light conditions and intermediate off positions between every setting. The auto-off function will switch the illumination off if unused for one hour. The MeoTac 3-12×50 RD features Meopta’s MeoShield protective lens coatings, MeoQuick fast-focus eyepiece and an erector system designed for maximum holding force to withstand heavy caliber recoil. This scope also has an anodized exterior for scratch resistance and is waterproof and fogproof for maximum performance and durability. The MeoTac 3-12×50 RD is covered by Meopta’s North American lifetime transferable warranty. Find out more at www.meoptausa.com.

RUGER AMERICAN PISTOL IN .45 AUTO

Sturm, Ruger & Co., Inc., is proud to announce the addition of the Ruger American Pistol Compact in .45 Auto. This newest compact model is offered in the “PRO” configuration with no external manual safety. Originally introduced in December 2015, the feature-rich Ruger American Pistol was designed with the latest U.S. Military standards in mind and was tested in the harshest environments to ensure the rugged reliability consumers have come to expect from Ruger. Ruger polled law enforcement and military trainers throughout the country to select the form, function and features of the Ruger American Pistol. The resulting pistol combines a recoil-reducing barrel cam (which better spreads recoil over time) with a low-mass slide, low center of gravity and a low-bore axis to provide better balance, less felt recoil and less muzzle flip than comparable pistols. The Ruger American Pistol also features a pre-tensioned striker system, which allows for a short take-up trigger with positive reset, and a modular wrap-around grip system that adjusts palm swell and trigger reach to fit a wide range of hand sizes. With a 3.75-inch barrel, overall dimensions of 7.25 inches long, 4.65 inches high and a weight of 28.6 ounces, the Ruger American Pistol Compact model shares all of the features and rugged reliability of the duty-size gun in a smaller, lighter, more concealable package. It ships in a hard case with medium and large replaceable grip modules and two nickel-Teflon-plated steel magazines (one 10-round extended magazine and one 7-round compact magazine). The American-made Ruger American Pistol is built on a rigid, one-piece, precision-machined, stainless steel chassis with integral frame rails and fire control housing. Additional features include genuine Novak LoMountCarry three-dot sights, a stainless steel slide with a non-reflective, black nitride finish, a one-piece, high-performance, glass-filled nylon grip frame and a mil-standard 1913 accessory rail. For more information on the Ruger American Pistol Compact in .45 Auto or to learn more about the extensive line of award-winning Ruger firearms, visit www.Ruger.com.

LIBERTY SUPPRESSORS ANNOUNCES THE SOVEREIGN

Liberty Suppressors is proud to introduce their newest .30 caliber suppressor, the Sovereign. The Sovereign was designed for the precision rifle shooter, as well as for the hunting community. At just over 1.5 inches by 7.125 inches and only 12.7 ounces, this titanium silencer all but disappears on the end of a rifle. It comes with both 1/2-28 and 5/8-24 direct-thread adapters, as well as the 5/8-24 LS1 muzzle brake mount and a full complement of beyond-the-box accessories available for the upmost in versatility. They round out the package with a custom Armageddon Gear Suppressor Cover making the Sovereign one of the most adaptable and functional silencers on the market. Find out more about the Sovereign and the full line of Liberty Suppressors at www.libertycans.net.

CHRISTENSEN ARMS RELEASE NEW STEEL-BARRELED LIGHTWEIGHT RIFLE

Continuing the strong tradition of excellence in design and performance, Christensen Arms is proud to announce its newest bolt-action rifle, the Mesa. Featuring a featherlight contour, stainless steel barrel and carrying the Christensen Arms’ Sub-MOA Guarantee, the Mesa offers a lightweight (6.65 pounds) and accurate package at an affordable price—$1,295 MSRP. Other features include a tungsten Cerakote finish, a removable seamless radial brake, a carbon-reinforced fiberglass stock, an adjustable match-grade trigger and many of the industry-leading features you would expect in a Christensen Arms’ rifle. The Mesa is available in multiple calibers including, .308 WIN, 6.5 Creedmoor, .300 WIN MAG, 7 mm-08, and 7 mm Rem Mag. The Mesa is currently shipping and available for purchase. For purchase information, please contact your local Christensen Arms dealer or find a dealer near you at www.christensenarms.com.

LUCID OPTICS L7 OFFERS QUALITY AND VALUE

LUCID Optics, manufacturer of the best value line of optics on the market, is proud to offer the new L7 Rifle Scope. The L7 1-6x 24 Rifle Scope offers users a crystal clear true 1x to 6x performance-driven optic. The glass-etched L7 reticle makes this optic an ideal match for use with the AR platform in short- to medium-range applications with most calibers. The L7 features a durable 30-mm aircraft grade, one-piece tube construction. The windage and elevation turrets offer 60 MOA on either side of the optical, center set with an easy to use “lift, adjust, press down to lock” design that is both accurate and durable with re-zeroable turrets. An operator selectable magnification lever allows the user to change the zoom function quickly. The L7 is 10.75 inches in length, weighs 20.4 ounces and is waterproof, fog proof and shockproof. MSRP for the L7 is just $449. To learn more and see the full list of specifications and features, visit www.mylucidgear.com.

MICRO RONI AND NON-NFA MICRO RONI NOW AVAILABLE

CAA, developers and manufacturers of advanced battle-tested firearms accessories, announces that the highly anticipated Micro RONI and the non-NFA Micro RONI with Stabilizer Brace are now shipping throughout the country to distributors and qualified dealers. The Micro RONI and the Micro RONI-STAB are the most compact pistol-to-carbine conversion kits ever produced. The Micro RONIs are each fitted for GLOCK models 17, 22 and 31 or models 19, 23 and 32—model specific. The Micro RONI-STAB carbine conversion requires no paperwork, no tax stamp and best of all, no wait! It features an officially licensed SB Tactical Pistol Stabilizing Brace which enhances one-handed firing of the Micro RONI-STAB by attaching to the operator’s forearm. The Pistol Stabilizing Brace has an adjustable and flexible nylon strap for a custom fit for any user. Although originally designed for wounded combat veterans and others with disabilities that inhibit their ability to securely hold a firearm, the overwhelming acceptance of the Brace within the firearms community has propelled the product to be one of the most sought after PDW pistol accessories on the market. The Micro RONI-STAB is constructed from high-quality reinforced polymers to exacting tolerances. The Micro RONI is by far the quickest and easiest conversion kit and can be converted in less than two seconds! It is also the most cost-effective. The Micro RONI with folding stock can be secured on a single-point sling and easily concealed for private security personnel. The pistol can still be operated with the right-folding stock folded. The space-saving Micro RONI makes an excellent personal or home protection carbine. For GLOCK aficionados, the Micro RONI will take their best pistol score at 25 yards and increase its range up to 100 yards with fantastic accuracy potential. No tools are necessary to convert the pistol to a carbine. By simply dropping the pistol in the kit and locking it, the Micro RONI conversion kit with the integrated pistol now functions as a singular, durable and accurate unit. Topped with a long Picatinny rail for the addition of lights, laser and NVDs, the Micro Roni’s features do not stop there. Additional accessory space has been added with two extra Picatinny rails on either side of the frame. An extra magazine carrier in front of the pistol aids in fast reloading and offers additional grip placement. Both Micro RONIs are ambidextrous, including many of the controls such as the trigger guard safety and a superfast cocking handle. Optional thumb rests are serrated in right and left positions for increased recoil control and controlled muzzle rise. New optional integral flashlights for the Micro RONI have been designed for the GLOCK Models 17 and 19. The FLFR features an on/off switch on its side and has a powerful 500 lumens of white light using a highly efficient LED. The Micro RONI and Micro RONI-STAB are available in Desert Tan, Black and OD and open the possibilities for Gens 3 and 4 GLOCK owners. You can visit them at www.usa.caagearup.com.

SPYDERCO INTRODUCES PARA MILITARY 3 KNIFE

Spyderco’s Para Military 2 is one of the most sought after and widely carried folding knives made. Many consider it the perfect pocket cutting tool, so what could make it better? For those who prefer shorter blades or live in areas with blade-length restrictions, the answer is a more compact, scaled-down version with a three-inch blade; Spyderco introduces the Para Military 3. This refined folding knife maintains all the essential features of the Para Military 2, including a full-flat-ground CPMS30V stainless steel blade, a high-strength Compression Lock mechanism, nested stainless steel liners, textured G-10 scales and a lightweight, easy-to-clean, open-backed construction. It also features a four-position clip that provides left- or right-side tip-up or tip-down carry and a generously sized lined lanyard hole. This knife carries a retail price of $199.95 and you can find out more at www.spyderco.com.

SHELL SHOCK’S REVOLUTIONARY 9-MM NAS3 CASES AND RELOADING TOOLS NOW AVAILABLE

Shell Shock Technologies, LLC, an early-stage technology and manufacturing company focused on developing innovative case technologies for the ammunition industry, announces that its revolutionary NAS3 cases and S3 Reload tools are now available for sale on its website (www.shellshocktech.com). NAS3 cases are 50-percent lighter than brass cases, offer greater lubricity and will not abrade, clog, foul, wear-out or damage breach and ejector mechanisms. The cases also offer greater corrosion resistance, tensile strength (2x stronger) and elasticity than brass. NAS3 cases will not split, chip, crack or grow (stretch) and are fully reloadable with S3 Reload dies. Customers have reported being able to reload NAS3 cases many more times than brass cases. A video can be found on Shell Shock’s website showing 9-mm Luger NAS3 cases being reloaded 32 times using S3 Reload dies. NAS3 cases have been tested successfully to pressures over 70k psi. NAS3 cases eject cool-to-the-touch and can be picked up with a magnet. The head can be colored for branding purposes and easy load identification. NAS3 cases are “Best in Class” for maintaining consistent velocity between rounds. In an independent test performed by H.P. White Laboratory (a major munitions testing facility) 9-mm rounds fired using NAS3 cases achieved a velocity standard deviation of 0.93 fps (124-grain FMJ bullet, 4.2 grains Titegroup powder, 10 rounds, extreme variation 3 fps). New NAS3 cases do not need sizing or flaring (i.e., requiring few stations/operations on the loading machine); they are delivered sized, flared and ready for primer, powder drop, bullet drop and crimp. Reloaders may find that NAS3 cases also require less crimping than conventional brass cases. Shell Shock’s NAS3 cases can be reloaded using a specially designed set of S3 Reload sizing and flaring dies. NAS3 cases are manufactured in two parts that are held together by a high-strength compression joint. Conventional reloading dies can put unnecessary stress on this joint (caused by the way cases are pulled out of the dies using the case rim/extraction groove). Unlike conventional brass cases, NAS3 cases were designed to enable the highest possible number of reloads. Conventional reloading tools are not suitable for use with NAS3 cases. To maximize the number of achievable reloads, S3 Reload sizing and flaring dies incorporate a spring mechanism that pushes the case out of the die without any risk of damaging the case. This technique puts no stress on the compression joint and does not damage the case rim. S3 Reload dies are designed to work on most bench-top reloading presses, including Hornady, Lee Precision, Inc., RCBS and Dillon Precision Products, Inc. machinery. S3 Reload dies can also be used with conventional brass cases. More information on the S3 Reload dies, including instructional videos, can be found at www.shellshocktech.com.