“We are only now able to speak about this program publicly due to a recently dismissed legal challenge that kept the HK416 out of the public eye and out of the competition for the Special Operations Force Combat Assault Rifle, commonly known as SCAR” – Jim Schatz, Military Programs Manager, HK Defense

Much ill-informed commentary has surrounded nearly all aspects of USSOCOM’s (United States Special Operations Command) SCAR competition, particularly as to why HK was so conspicuously absent. This reporter believes the problem can be summed up neatly with just one word: Lawsuits.

When SCAR solicitations went public, HK’s versatile XM8 system was in an advanced state of development under Program Manager Soldier Weapons (PMSW) after transitioning from the Joint Services Small Arms Program. JSSAP, set up years ago in an attempt to avoid the inherent wastefulness of uncoordinated development, is the official new weapons and ammo pipeline for all the US Armed Forces. A fully SCAR-compliant version XM8, we were told, was ready for submission to USSOCOM. But it was barred at the last minute because it was a “government-sponsored entry.”

While most of us probably have some heartburn with the concept that the SCAR program’s much-touted “full and open competition” actually meant that only industry-submitted rifles could be candidates, such thinking doesn’t necessarily apply in a genuine emergency situation.

In fairness to the folks who were desperately trying to get US Special Operations Forces something measurably better than their stubbornly troublesome M4 carbines, it was a certainty that any legal challenge to the winning SCAR would delay fielding for months or even years. So, if PMSW’s HK-built XM8 SCAR emerged on top, a crippling lawsuit alleging favoritism was all but inevitable.

It is also reasonable to say that one or more of the expected entries from some big names among US and international gunmakers would almost surely meet the grade. Most anything better than the M4, fielded quickly, would be preferable to waiting interminably for other candidates to run the gauntlet of lawyers and judges.

We at SAR would like to think that these admitted speculations are prominent among the real-world factors that may explain the tough decision to disallow the HK XM8 SCAR.

But, what about the HK416? This assault carbine and rifle system was clearly an industry-funded COTS (Commercial Off The Shelf) development, it likely met all the stated SCAR program requirements, and the required test samples with all bells, whistles, papers, and whatnot were ready to go into the arena of competition beginning 18 June 2004.

Back in April 2004, Colt filed legal action against Bushmaster Firearms and Heckler & Koch, alleging infringement on proprietary aspects of the AR-15/M16/M4 design. Although recently resolved in an undisclosed but apparently satisfactory manner for all parties, the lawsuit and related court orders kept HK’s 416 out of the running for SCAR.

This was unfortunate for HK’s plans, and in reality, many in the military community as well as the small arms industry had really wanted to see the HK416 put through the SCAR testing to see what it was made of. A drop on unit to fix the M4 is of great interest to many who carry it. This would have also allowed the HK416 to move onto the SCAR Heavy phase and the EGLM (Enhanced Grenade Launcher Module) section.

Operator Envisioned

Army Special Operations Command, which includes Rangers, Green Berets, “Nightstalker” aviation, and at least one officially nonexistent unit of legendary prowess, was not at all happy with the performance of standard-issue M4 series carbines. Despite SOPMOD (Special Operations Peculiar Modifications) and other extraordinary efforts over several years to identify and correct problems with reliability, durability, accuracy, and lethality, Army special operators were rapidly losing confidence in Colt’s chopped “Sixteens.” Particularly those deployed in the aftermath of 9-11 to fight Osama bin Laden’s terrorists in the harsh terrain and climate of Afghanistan.

This dissatisfaction achieved critical mass when it was determined that cleverly worded restrictions in Colt’s government contract blocked all other firms from participation in PMOD (Platform Modifications) to the troubled weapons. Unwilling to let the M4 situation continue, but not having authorized funding to attempt a “Fix” on the problems, Army Special Operations turned to a company with a reputation for solving small arms problems and doing it on their own dime.

The half century old German firm of Heckler & Koch has earned a well-deserved reputation for innovative firearms design and excellence in manufacture. US and allied special operations units are enthusiastic customers for the full line of HK weapons including the iconic MP5 submachine gun.

Relevant to this story, in the last few years some of the company’s prominent engineers bought out corporate interests and now run the whole show. This streamlined, performance driven structure is one major reason for agreeing to help Uncle Sam at no cost. The other comes from long established relationships between HK’s military and federal operations representatives and special operations personnel of all services. For Jim Schatz and many other long-time HK reps, the bottom line isn’t money; it’s men whose lives are on the line.

Mid-Life Crisis

The willingness to work on the M4’s woes without direct compensation was one thing. The ability to succeed where all others had failed was quite another. As luck would have it, HK could proudly point to an extraordinary success story in transforming the British Army’s relentlessly awful SA80 rifles from rubbish to reliability. The bullpup L85 and L86 weapons are a textbook example of a basically sound design, improperly produced and fielded in an unreliable condition. They repeatedly defied all home-grown efforts to correct their many deficiencies and, in a decidedly embarrassing development, Royal Marine Commandos had insisted on the switch to Canadian-made M16s in the run-up to Operation Iraqi Freedom.

At this time HK was a subsidiary of giant conglomerate British Aerospace, so it was politically acceptable for Germans to get the rifle-rework job as a one-last-chance before the scrap heap. The short version of the epic tale of the “SA80 Mid Life Improvement Programme” is that HK’s Ernst Mauch succeeded, dumbfounding the critics and delighting the UK’s long-suffering Tommies by delivering SA80A2 Rifles and Light Support Weapons that worked.

One of the ripest areas for improvement in SA80 weapons was the magazine, a NATO standard aluminum 30-rounder of the same type as issued to American GIs for their M16s. Just like ours, the British magazines were flimsy, prone to damage, cheaply made and geometrically awkward. They had to go.

HK’s team quickly concluded that no amount of tinkering including polymer housings, synthetic followers and the like would do the trick. In short order they produced a gracefully curved, rock-steady version with heat treated steel walls and follower with anti-friction finish, advanced spring stock, and careful attention to production tolerances. It is available also in 20-round capacity and both with HK’s same proprietary “Maritime” anticorrosion coating as used on the famous MK23 SOCOM pistol.

Formal testing and combat experience have conclusively demonstrated the dramatic increase in reliability and service life from the combo of Mauch’s A2 engineering changes and the switch to High Reliability magazines. As of this writing, HK is well along in refurbishing some 300,000 existing weapons at its factory complex in Oberndorf, Germany.

Project HK416

US Special Operations Command knew all this because operators in Afghanistan got a planeload of HK High Reliability Magazines as a Christmas present in 2001. So, with a government-approved no-cost contract in hand, a purposely-unnamed “user unit” in Army Spec Ops confidently lent HK some of its troubled M4s for intensive technical and operational evaluation beginning early in 2002. Aside from some general requirements to maintain the M4’s major mechanical and handling features and keep as many of the original parts as possible, HK was to have a free rein.

Design team chief Wolfgang Bantle put the guns through all steps in the proven test regimen developed in the SA80 experience including high-speed video of mechanical action, detailed metallurgical analysis and carefully considered parts swapping.

Bantle’s assessment identified key areas for modification to increase accuracy, safety, “user friendliness” including ease of handling and cleaning, modularity, and parts interchangeability. Most importantly, he promised a significant increase in reliability as well as extending component service life to at least double that of the M4 series carbines.

Fundamental to the success of the rework was the decision to scrap AR-10/AR-15/M16 inventor Eugene Stoner’s direct gas system of operation. Indelicately but accurately described as “craps where it eats,” the M16/M4 pumps hot gas and carbon fouling into the bolt carrier and receiver with every round fired.

It must have been a no-brainer for Bantle to immediately change out the M16 gas system and plug in the HK G36 assault rifle’s piston and pushrod. An adaptation of a system first widely used in the WWII Russian SVT (Tokarev semiautomatic rifle) this is HK’s highly successful departure from its traditional roller locking system as found in the seminal G3 and MP5. Stoner’s successful multiple lug lock up system was retained. The G36 operation system has since been further modified in the XM8 family of weapons.

As seen in the accompanying photos, the G36 system in the HK416 has a gas block mounted above the barrel at a position near the muzzle end of the quad rail. Inside is a port drilled in the top of the barrel that diverts a small amount of gas as each round is fired. This enters an expansion chamber in the gas block to kick a piston rearward, simultaneously driving a pushrod against a striking surface atop the bolt carrier. Superheated gas and carbon fouling are vented at the front of the handguard.

This clever arrangement not only gives much cooler operation and far cleaner internals, it is also said to be insensitive to barrel length and variations in ammunition. Both are very important for “modularity” and multinational logistical interoperability.

Operator Tested

At appropriate stages, Bantle’s rework would be sent to the purposely-unnamed “user unit” for operator evaluation, much of which was done in extreme environments including the scorching Arizona desert in mid summer. Their feedback was carefully considered then cut into steel before resubmitting each in a succession of new and improved prototypes.

All of this was being done over many months with no monetary compensation under terms of the contract with USSOCOM. On the other hand, there was still much comfort at HK to be taken in strong sales worldwide of their full line of military and law enforcement weaponry. The future looked good for the XM8 at PMSW as did prospects for the developmental 416 system to enter and do well in the upcoming SCAR trials. Until, of course, both systems were barred from competition.

Undaunted, Bantle and his team pressed on toward the finish line. Requested improvements continued including availability of four barrel lengths from 10 to 20 inches, all cold hammer forged from the finest steel with hard chromed chambers and bores for greatly extended service life and immunity from obstructed bore disasters.

Interface between the moving parts, the bolt and barrel extension in particular, was carefully studied on high speed video then modified to optimize performance. This included refinement of the locking recesses and lugs as well as strengthening the extractor and its spring. Extending the barrel nut some 10mm yielded greater rigidity for accuracy and function, as well as giving a heftier anchor point for HK’s very important free-floating quad rail forend.

This forend itself is noteworthy for a number of design features obviously demanded by the operators. Rock solid when in place but quickly and easily removable with only a screwdriver or bolt lug as a tool, it precisely indexes to the receiver top rail at exactly the same height. Full length MIL-STD 1913 hardpoints at 12, 3, 6 and 9 o’clock positions offer plenty of room to mount a catalog of SOPMOD accessories. Numbered positions facilitate exact relocation of day and night sights, IR and visible lights, grips, grenade launchers, and more.

The M4’s buffer, despite being “improved” in two stages by Colt, still didn’t perform to HK standards. Bantle’s solution called for a carefully calculated filler of granulated tungsten paired with a new spring of better materials and more consistent tension. This smoothed out the action and virtually eliminated the unhealthy phenomenon of “bolt bounce.”

Operator Chosen

The resultant HK416 Enhanced Carbine was accepted by USSOCOM on behalf of that purposely-unnamed Special Operations “user unit” in December 2004 and deliveries of production models began soon afterward. It wasn’t long before reports of combat success in southwest Asia were forwarded to HK; compensation in a very real sense for the hard work and economic uncertainty of the multi-year project.

Not surprisingly, HK now has its hands full with a flood of orders from not only the original requestors, but other elite military and federal law enforcement organizations, the names of which are carefully guarded. Program spokespersons explained to press event attendees that orders from other LE customers – however urgent – must wait for awhile. Disappointingly, the possibility of civilian-market sales of the Drop-In-Kit is “not likely in the foreseeable future.”

Lock, Stock and Barrel

Despite this list of modifications, the HK416 Enhanced Carbine and Rifle System maintain the basic mechanical characteristics of Stoner’s otherwise efficient design. So, “legacy” M4s (Colts already in the field or on the repair bench) can be quickly and simply upgraded using the Drop-In Kit by substitution of HK’s upper receiver with bolt assembly, buffer and spring assembly as well.

No vexing serial number change and no retraining to new operational and handling characteristics. Not to mention the vast increase in reliability, serviceability, accuracy, and compatibility with rail add-ons.

Of course Bantle was inspired to go ahead and fix the lower receiver as well. HK’s own 416 D (“Defense”) model lower offers superior fit and finish with pictograph selector markings and a specially flared and beveled magazine well for faster reloading. Add HK’s carbon-reinforced polymer four-position telescoping stock and you have the Mercedes of M4s at your fingertips.

Just as the SCAR is to have both Light and Heavy versions, a firing prototype HK417 is undergoing testing in Oberndorf, chambered for powerful 7.62x51mm NATO standard ammo. Rest assured that other calibers are under consideration including 6.8 Remington SPC.

Building a Better Blooper

Beginning way before but still unresolved during the run-up to the SCAR program, the Army has long been dissatisfied with the Vietnam War era M203 40mm grenade launcher; the familiar push-the-barrel-forward-to-load “blooper” (named for the distinctive sound of its low velocity cartridge on firing) is simple in mechanical function, straightforward to operate, tough and accurate enough. But there’s room for improvement and the search for an Enhanced Grenade Launcher Module has been a funded requirement under various names for years.

HK has had a better blooper ever since they took the top-break HK69 and made it open on the side instead. This deceptively simple and eminently practical change immediately allowed under-barrel mounting to most any weapon with a suitably long forearm. And, since the open breech stuck out to the side, even extra long special grenades (pyrotechnics, riot loads, etc.) could be inserted without a problem.

Improvements to the firing mechanism were also made for safety and serviceability. One in particular is the double action trigger system that, in the event of a misfire, allows multiple tries at activating a stubborn primer without the hair-raising need to open the breech every time for recocking. An unpleasant experience with a balky HE round in the chamber of an M203.

A modified version of the original HK69’s integral pistol grip was retained, giving the grenadier a truly ergonomic foregrip that’s handy not only for grenade popping but also helping to stabilize full auto fire with the host rifle or carbine. This isn’t available on the M203 where one’s hand stretches to grip the magazine and reach the trigger at the same time.

This new and improved blooper was first offered by HK as the AG36, a welcome addition to the innovative G36 family of assault weapons. It has since found favor clamped under other designs including the afore-mentioned British SA80A2 (L85A2) rifles and it does nicely as the standard 40mm component of PMSW’s HK-made XM8 family of rifles and carbines.

A slightly modified AG36 was HK’s obvious choice to compete in the Army’s 40mm Grenade Launcher Module (GLM) solicitation that kicked off in June 2004. Don’t be embarrassed if you confuse this with USSOCOM’s Enhanced Grenade Launcher Module (EGLM) program, a “spiral development” component of the SCAR light and heavy rifle, also beginning that same month. And don’t be further confused that the ARDEC GLM apparently morphed into PM Soldier Weapons’ XM320 GLM. Clear?

Anyway, the M203 is toast since HK’s GLM/XM320 entries came out on top and now, as announced in May 2005, HK Defense will soon be providing Uncle Sam’s grenadiers with as many as 11,000 side-opening forties, special day-night sights, and all the support equipment that normally accompanies a new small arms system.

As to USSOCOM’s EGLM, this automatically went to FN when the FN candidate won the SCAR L competition. HK has cause to hope that their XM320 will be under consideration as an alternate GL component in the SCAR family of light and heavy weapons.

Pistol Power

Handguns tend to be an afterthought to the regular military services. Not so for special operations and law enforcement where a quick draw and double taps are all-too-often required to satisfactorily resolve a whole lot of sticky situations.

HK has an almost overwhelming array of choices when it comes to pistols. From undercover concealment to underwater infiltration, there is a design, configuration, caliber, and compatible accessory to cover just about any contingency.

HK Defense points with justifiable pride at the “largest pistol contract in U.S. law enforcement history” coming in August of last year when the US Department of Homeland Security (DHS) announced its intentions to buy as many as 26 million dollars worth of HK pistols.

After four months of exhaustive testing of 46 models submitted by five of the industry’s most prominent names, DHS selected HK’s USP Compact LEM, the P2000 and P2000SK. Each one was selected in 9x19mm, .40 S&W and .357 SIG calibers.

Future Handgun System Candidate?

One handgun system that commanded the most attention from attendees was the USP COMPACT TACTICAL .45, intriguingly equipped with a “wet technology” sound suppressor from Knight’s Armament.

HK’s family of USPs (Universal Self-loading Pistols) has found great favor with military, law enforcement and civilian shooters who like the classic M1911 but also appreciate the advantages of updated mechanical characteristics. Among these are a patented recoil reduction system that easily handles punishing +P+ loads, super accurate and high endurance polygon rifling, choice of ten trigger/firing mode configurations, and four popular calibers from 9mm to .45ACP.

With the Army’s recent announcement of the Future Handgun System program has come intense speculation over which COTS (Commercial Off The Shelf) pistol is most likely to emerge victorious as a replacement for tens of thousands of current Beretta M9s. It’s NATO-standard 9mm ball cartridge’s deficiencies have been irrefutably documented and, according to the Program Manager for Soldier Weapons, “the Future Handgun will almost certainly be chambered in .45ACP.”

Any number of worthy contenders may be found among offerings by US and overseas firms making serviceable handguns that fire John Browning’s enduring 95 year old copper jacketed bumble bee. But the performance criteria, physical characteristics, business and manufacturing aspects, plus a laundry list of other things certain to be required by Uncle Sam, will rule out most from the beginning.

HK spokespersons politely decline to speculate on any aspect of their firm’s possible participation in the Future Handgun trials. So, this leaves it up to us to look at what is available right now and speculate that HK’s likely entry will be a USP Compact – easily configured from currently available options with whatever the Army’s specs call for.

The USP Compacts are both sturdy and light, featuring a shorter trigger reach and grip circumference that make it female soldier friendly without compromising combat performance. Ambidextrous controls? Check. DA/SA/LEM triggers? Yep. Anticorrosion? Of course. Service life? 20,000 rounds minimum. Tac light mounting? Rails molded in. Suppressor? Glad you asked….

SPECOPS types will no doubt appreciate the afore-mentioned USP Compact Tactical .45, pretty much a standard Compact equipped with a threaded o-ring barrel. This allows screw mounting of many different suppressors including the Knight’s Armament wet can shown in the accompanying photos.

Bureaucrats will also appreciate the significantly lower price vs. USSOCOM’s formidable MK23, as well as modularity that allows installation of a match-grade trigger mechanism and micrometer target sight if needed.

Wartime pressures have accelerated many aspects of the weapons and ammunition procurement process but the biggest steps must be taken very deliberately. As this is written in the last week of June there is no definitive answer to several important questions involving HK weapons under consideration by the US military.

Until such time as contracts are actually awarded (and maybe lawsuits settled) for key items like the XM8, HK Defense has prudently postponed construction of the major manufacturing complex planned for the 29 acre site it has purchased in Columbus, Georgia, just outside of the US Army’s Fort Benning, Home of the Infantry. Meanwhile, its products continue to be made in Oberndorf by an engineering and manufacturing team of unrivalled skill.

These winning designs are represented in the United States by men like Jim Schatz, Wayne Weber, Phil de Garis, Bob Schultz, Sal Fanelli, George Kontis, and plenty of others who are the underlying truth behind HK’s familiar motto: “In a World of Compromise, Some Don’t.”

Visit HK Defense on the web at www.hkdefense.us. Also, SAR recommends the unofficial but highly informative www.hkpro.com.

HK416 Model 10RS Tech Specs

Caliber: 5.56 x 45mm (.223 Remington)
Operation: Short recoil piston and pushrod, fires from closed bolt
Locking: Stoner type multilug bolt rotates in carrier
Selector: Safe, semi and full auto
Cyclic rate: 700 to 900 rpm
Barrel: 10.5 inches, conventional rifling 1 turn in 7 inches, cold hammer forged
Overall length: 27 inches (stock retracted) to 30.9 inches (extended)
Weight: 7.3 pounds
Notes: Drop-in upper receiver kit is fully compatible with M4 and similar lower receivers. Optional barrel lengths
include 14.5, 16.5 and 20 inch versions. Proprietary free-floating quad rail and buffer assembly. Now in service with special operations units in southwest Asia.

HK XM320 Grenade Launcher Module Tech Specs

Caliber: 40 x 46mm
Operation: Single shot
Locking: Side opening
Trigger: Double action
Barrel: 8.47 inches, rifling 1 turn in 47.24 inches
Overall length: 11.81 inches.
Weight: 3.39 pounds as mounted on M4
Notes: Operator configurable as under-barrel or stand-alone launcher with additional components including mechanical ladder or day/night/ranging electronic sights, and detachable/retractable stock. Side-opening feature accepts extra long special purpose rounds. Modular design and open architecture for multi-weapon compatibility and planned upgrades.

HK USP Compact .45 Tech Specs

Caliber: .45 ACP
Operation: Recoil
Locking: Modified linkless Browning type
Trigger module: 10 variants
Barrel: 3.8 inch, polygon rifling, 1 turn in 15.98 inches
Overall length: 7.09 inches
Weight: 1.6 pounds
Notes: Slightly smaller version of standard USP. 8- and 10-round magazine capacity. Carbon fiber reinforced polymer frame. Recoil reduction system, 20,000 rounds minimum service life. Tactical model with threaded o-ring barrel for suppressors.

Long time readers of Small Arms Review should know by now that my favorite annual gun event is NDIA’s get-together for manportable weaponry enthusiasts, known formally as the Joint Services Small Arms Symposium, Exhibition & Firing Demonstration. I look forward to this in much the same way a kid anticipates Christmas morning when friends and family gather, gifts are opened, and there are lots of great new toys to play with.

This year’s three day fete was held in mid-August in a swanky hotel in downtown Little Rock, Arkansas (insert your own Bill Clinton and Paula Jones joke here), featuring the usual mix of thoughtful technical papers, exciting industry exhibits, and the chance to go out to the range for some earplug-packing, gunsmoke-snorting live-fire fun.

Now, there is much new and improved hardware to report on that is of immediate interest and practical value for military, police and civilian shooters. However, let’s start with something we saw there that may be a year or two away from the hands of freedom’s defenders but has damn sure got the attention of the firearms establishment right this very minute.

METAL STORM

“My amazement is at the process — O’Dwyer didn’t blow up a barrel or kill himself in making it.” SAIC Physicist Adam Drobot, quoted in Scientific American magazine.

I can’t think of a better name than METAL STORM to represent Australian inventor Mike O’Dwyer’s bold new concept in projectile pushing at fantastic rates and quantities. Now with private and government financing in excess of $400 million, O’Dwyers multinational corporation seems likely to brush aside nearly a millennium of warfare’s established launcher and payload technology.

Overhearing mutterings from a number of exhibitors and other conference attendees about some “weird Star Wars stuff”, I hastened to METAL STORM’s booth and wormed my way through the crowd to snag some promotional materials. Retreating to a quiet corner, I skimmed the handouts and zeroed in on the vivid description of its operational principle. O’Dwyer’s inspiration came, we are told, by the speed and precision of an inkjet printer head on his everyday desktop computer. This led him, by trial and error (fortunately not life-threatening error), to have a computer program electronically fire rounds at infinitely tailorable speeds and sequences.

In his METAL STORM ballistic system, the only significant moving parts are projectiles from uniquely designed (also patented) caseless ammunition, loaded one in front of the other as many as practical depending on the length and caliber of the launch tube. Discarded entirely are all the usual mechanical contrivances required by existing multi-shot weaponry for feeding, mechanically firing, extracting and ejecting. Time to reload? Just rip out and replace the pre-loaded, non-metallic barrel cluster.

Does it work? Documented firings of “Bertha,” the thirty-six barrel, 9mm prototype, burping out 180 rounds in about one one-hundredth of a second, have established a new official Guinness World Record. Is it practical? For one thing, this sealed block of bullets and barrels could prove vastly superior to complicated and maintenance-intensive cannon caliber Gatling type systems now protecting many free world warships against EXOCET type missiles.

Advanced Sniper Rifle

Numerous demonstrations of Bertha and other configurations including a handgun have been conducted for high level leaders in military and scientific communities in Australia and the US. This has resulted in a gusher of RDT&E funding including a $10 million contract from DARPA (Defense Advanced Research Projects Agency), the Holy Grail of America’s defense technology, to develop the Advanced Sniper Rifle.

The cluster of four barrels on the rifle’s conceptual prototype is apparently its only unconventional aspect. Microprocessor based fire control allows the gunner to key in and send the best combination of a variety of projectiles as required for antipersonnel or antimateriel applications. Aiming and related functions are to be optimized using ongoing developments from such official US government initiatives as the very expensive “Objective Individual Combat Weapon” and the very spooky “Project White Feather.”

Electronic Handgun

METAL STORM is also creating quite a buzz in the world of law enforcement with the O’Dwyer Vle (Variable Lethality Law Enforcement handgun). Another Guinness honoree as the world’s first 100 percent electronic handgun, as of this writing it is a single barrel, seven shot working prototype. In addition to a personalization feature that will let only one specific officer fire the weapon (desirable if it’s taken in a scuffle or otherwise lost) its computer chip “brain” also stores additional keypad instructions from the gunner. This allows tailoring of each firing among a number of options including single shot (semi-auto), double tap, triple tap, or high energy modes. This last setting kicks out two shots at a mind-boggling 500,000 rpm so as to drill right through body armor!

Subsequent handgun models forseen by METAL STORM include multiple barrels in a soft recoil mount with different ammo ranging from “less lethal” stuff like stun bags and CS, to conventional kinetic energy terminators.

Dick Tracy take note: The Vle will eventually be equipped, we are told, with any number of optional gadgets like a two-way radio for immediate situation reporting and “advice” from the incident commander, as well as a GPS so everybody knows where the gun and its owner are located. Even “political correctness” can be enforced by a provision for a superior to electronically jam the weapon if a combat-stressed peace officer is about to take out the “wrong” category of miscreant at an embarrassing moment. Try explaining that to the family of the subsequently slain or horribly injured officer…

Other applications of METAL STORM technology cry out for development. According to O’Dwyer in his formal technical presentation at the event, some military initiatives include several already funded programs such as the Area Denial Weapons System (minefield replacement), vehicle self-defense, and arming of unmanned aircraft.

Not surprisingly, much of the muttering about METAL STORM overheard at the show is coming from established gun and ammo makers. Many of those who do not have their heads in the sand are understandably concerned by the potential of the O’Dwyer system for rather quickly putting conventional firearms in the same category as bows and arrows in the atomic age. In response, numerous very legitimate objections and cautions are being raised including danger from exploding barrels and system vulnerability to EMP (electro-magnetic pulse). So, SAR will be watching and reporting as this story unfolds.

Back to Earth

The symposium part at NDIA is like going to school for a highly concentrated series of half-hour lectures on the latest developments in guns, ammo, sights and related things that are of value to the soldier and policeman. This year’s lineup of distinguished speakers presented some 48 technical and informational papers, most well illustrated with computer-generated visuals and some with fascinating video clips. Space does not permit a detailed account here, but what follows are some of the highlights. Those with internet access plus the time and tenacity to delve deeper are encouraged to access the full collection of technical presentations that are thoughtfully posted by NDIA in cooperation with the Defense Technical Information Center for your viewing pleasure at www.dtic.mil/ndia/2001smallarms/2001smallarms.html

Small Arms Master Plan

As should be expected, there is intense interest from many directions in the formal plans that the US military has for research, development and procurement of weapon systems. After all, America’s Armed Forces are the free world’s largest and have the most money to spend. This is well covered each year by a series of presentations from top names in the Joint Services Small Arms Program (JSSAP) who tend to cover everything from improving the old stuff currently in use (now euphemistically called “legacy systems”) to crystal ball projections of at what is possible ten or twenty years out.

Some short-term projects include development of non-lethal ammo that will work the semiauto action of the new M1014 shotgun (which works just fine right now with crowd control loads by pulling back on the charging handle after each shot) plus ways to lighten existing weapons like the M249 Squad Auto Weapon and the M240B Machine Gun. In the mid term, the US military wants an Advanced Medium Machine Gun – presumably to finalize the lingering death of the tin can M60 and replace the ultra-reliable M240 even though it will probably be lighter by then. Finally, programs are well underway to harness various forms of directed energy (real ray guns, sonic blasters, and who knows what else) for use in WWIII.

Interestingly, both the Objective Individual Combat Weapon and the Objective Crew Served Weapon have been bumped up a notch in funding and fielding and are said to be on track for FUE (First Unit Equipped) in 2009. It will be quite fascinating to see if METAL STORM technology has any impact on these programs in the next couple of years.

The Few, The Proud, The Oughta Be Better Equipped…

A bare-knuckled assessment of the current state of US Marine Corps weapons and equipment for amphibious warriors at the spear point was delivered by Lieutenant Colonel James Diehl of Systems Command, with a bit of dry humor backed up with lots of actual instances. For example, don’t tell the bad guys, but after making sure first line guns stay up and running, the Marines don’t have enough maintenance money to repair and recondition the M249’s in wartime reserve!

A later presentation by a top-level guy from JSSAP noted an $11 million shortfall in funding the Army’s small arms rebuild program to keep “legacy” guns working. Yes, they’re all waiting for something to happen from that presidential campaign-promise that “Help is on the way.”

LTC Diehl’s laundry list of the Corps’ initiatives includes dropping the 60mm mortar in favor of a lighter but longer-reaching 81mm, more M4 carbines and their add-on accessories, ensuring all optical devices have laser-proof coating, and painting all those black guns and other stuff “Coyote Brown” for better camouflage. The Corps is also seriously exploring the use of ceramic liners to enhance performance of machine gun barrels, searching for more effective airbursting fuses, and seems to have a healthy skepticism toward Army plans to replace the combat classic M26 “Lemon Frag” grenade with something smaller and lighter so that girls can throw it.

Oh, and by the way, the Marines are once again taking a hard look at and doing live-fire testing of Jim Sullivan’s light, compact and highly controllable ULTIMAX 5.56mm Squad Auto Weapon. Sullivan, by the way, is also the guy who worked on making Stoner’s AR-10 into the M16, designed the incomparable C-MAG, and lots too much more to mention.

High Tech Crap

The irreverent Mr. Sullivan himself was on hand at the meeting to receive this year’s prestigious George M. Chinn Award for his lifetime of high achievement in the small arms world. He delighted many and offended others with pungent remarks during his acceptance speech, decrying such “fribble-frabble of fashion” as full-auto provision on individual weapons and the expensive, heavy, complex “high tech crap” that is likely to break or otherwise be rendered useless in the crucible of combat. Nothing stings so much as the truth…

Sullivan wasn’t the only iconoclast to shake up this gentlemen’s club with frank and pungent opinions. Reed Knight, Mr. SEAL Weapons himself, delivered a lively talk formally titled “Challenge for the Defense Industry.” Noting JSSAP’s commendable and continuing search for weaponry that is more reliable, easier to make and maintain, lighter and more effective, he criticized the often poorly thought out and confusingly written requirements documents put out by the military’s bureaucracy that contractors must bid on. “The customer needs to clearly set goals, challenges and rewards,” Knight said, “and say what you are willing to pay to meet those needs.”

SOCOM

Special Operations Command (SOCOM) has lots of things underway to support Rangers, SEALs, Special Forces and such, but their three big initiatives are the Advanced Light Grenade Launcher (the SACO 40mm showcased last year), a 7.62mm Lightweight Machine Gun (SEALs have pretty much used up all their specially chopped M60s), plus more and improved bells and whistles for the M4 carbine and the Navy’s new Mark 11 Mod O (Knight’s SR 25) sniper rifle.

Step Right Up

Now, unrelated to SOCOM’s presentation but as luck would have it, Knight’s Manufacturing and more than forty other business and government entities were downstairs in the exhibit hall with a whole bunch of exciting hardware. This is a great place to pick up and point exotic guns, eyeball the latest in sighting systems and often be able to talk with the actual person who designed and/or built them.

Taking Knight’s for example, they had brought along not only the SR-25 in various configurations, but a whole array of new and improved items like their Rail Adapter System’s MRE (Modular Receiver Extension with “more real estate”). This is a response to the very critical need of many spec-ops types for lots more space to clamp on any number of devices as dictated by particular missions.

They also offer a bunch of things to clamp on to US military and other small arms including a forward pistol grip, bipod, various suppressors, and the in-line “KnightScope Model 007.” This unity magnification image intensifier is intended for tandem mounting with the customer’s preferred day scope, giving around-the-clock operation capability.

Oh, and if you want a handguard for your M4 carbine in the stylish new “Coyote Brown” or other terrain matching colors such as green or white, Knight’s can fix you right up.

Many other great companies were on hand with cutting-edge products like the Leitz Pocket Laser Rangefinder, AirMunition marking rounds, Armalite Mk 19 blank adapter, and lots of night vision devices.

Free Range Time

This year’s host for the event’s all-important live fire portion was the National Guard Marksmanship Training Center at nearby Camp Joseph T. Robinson. They had set aside Range 13, a classic Known Distance facility dating all the back to WWI, and thoughtfully provided a diverse and interesting array of hard and soft targets to accommodate a full spectrum of weapons from 9mm handguns to .50 caliber sniper rifles. In addition to such classics as swinging steel plate silhouettes and oil drums (empty, of course), there were several old 2 1/2 ton trucks positioned at various distances. Also, Caswell International set up a bunch of their radio-controlled popup target mechanisms complete with stroboscopic hostile fire simulators that are particularly lively in the dark.

Yes, in the dark. This year a significant departure from the usual blistering summer afternoon range ordeal called for the live fire demos to begin about 90 minutes before sunset — right after a speech by Little Rock’s mayor and a tasty barbecue supper. Theoretically, this was going to allow sufficient daylight for regular “shoot and tell” by nine companies, and then as darkness fell the night sight guys would have perfect conditions.

Well, a combination of factors delayed the first rounds going downrange and frequent halts for safe passage of small planes to and from a nearby airport meant that most of the rest of the live fire was done under conditions rapidly progressing from low light to pitch black. But hey, that’s a lot like what the real world imposes on infantrymen and generator-mounted floodlights give sufficient illumination to allow spectators to see what was being demonstrated. Suck it up and drive on.

Oldies but Goodies

Another departure from the norm was conspicuous in the evening’s first demonstration. Distinguished retired soldiers Colonel Tom Brown (now with VT Kinetics) and Colonel John Meloy (now with Benelli) put on vintage US Army uniforms and live fired several of the classic infantry weapons that were used in World Wars One and Two. Taking the microphone while “Private Benelli” stepped up to the firing line, Brown pointedly contrasted these old machined steel and hardwood guns with the sheet metal, cast aluminum and plastic weaponry of the period from the Vietnam War to the present. “These,” he said, “are the guns that actually won wars.”

New Generation

Moving down the firing line as twilight rapidly deepened into purple then black, subsequent presentations of ten to fifteen minutes each were made by VT Kinetics firing the ULTIMAX and the SAR-21, GEMTECH suppressors, HK’s new P2000 pistol, PDW and chopped G36k assault carbine. Knight’s Armament fired several KnightSight equipped suppressed weapons including their 5.56mm SR-15 and 7.62mm SR-25, dramatically closing with a long belt of ball and tracers full auto from a Stoner Light Machine Gun.

Big Boys

These relatively small weapons were followed by several big and spectacular .50 caliber sniper rifles, grouped near the center of the range and all mounting various types of night sights. Mark Westrom cut loose with his AR-50, Jim Owens touched off the FN-PGM, and Ronnie Barrett pumped out a few from his semiauto M82A1. All of these guns use a backward-deflecting muzzle device to help tame recoil and reduce the enemy’s ability to detect muzzle flash and report. Well, as dramatic as this is on firing in daylight when the dust and grass goes flying, you ain’t seen nothing until you stand behind and to one side of these shoulder cannons at night. Wow!

Nowhere to Hide

Well, nearly an hour after it was really, really dark, the night sight guys on the far end of the firing line had their turn and nearly perfect conditions. Moonrise wasn’t going to happen for a while and a crosswind was blowing clouds of smoke from numerous tracer-induced grass fires to completely obscure most targets from 300 yards on back. This is bad news for image intensifiers but just right for thermal imagers. Recent advances in the technologies of thermal imaging including micro-cooling and reduced power consumption have made these previously heavy, bulky and temperamental devices much more practical and affordable for wider use on small arms systems.

Jim Looby and the FLIR team had set up a table with computer and television screens right at the spectator barrier so the crowd could look at real-time color video output from the TIPS-HPC thermal sight mounted on a bolt action rifle. This got really dramatic when the rifle was fired and spectators watching the video screen could see sparks from the bullet’s impact on metal targets.

Raytheon was right next door, similarly feeding the output of a tripod-mounted AN/PAS-13 into table top video screens. This gave onlookers a great thermal image picture of whatever it was downrange that anybody was firing on at any given time.

First Look at the HK P2000 Pistol

Jim Schatz, Director of Federal Operations for Heckler & Koch’s American office, brought along the brand new P2000 semiauto pistol for display at NDIA Small Arms 2001. We caught up with him on the range at Camp Robinson where he was preparing to function test and zero the P2000 along with several other weapons in advance of the evening’s live fire demonstrations. Jim was nice enough to give me a few minutes alone with this interesting new handgun so I could take the detailed pictures seen here, and then he did a little shooting for action views.

Surprisingly slim despite having a 13 round magazine, the P2000 was created at the request of Germany’s federal police for reduced size and weight with greater operational simplicity and human engineered for higher hit probability. Purposely eliminated is any specific mechanical safety that slows getting off that very important first shot. Its innovative double-action-only mechanism can be set in “semi-cocked” mode for a smooth, relatively light trigger release on the first squeeze. Subsequent shots are even lighter and faster as the recoiling slide fully cocks the exposed hammer with each round fired. A polymer recoil absorber and improvements on the classic Browning locking system also contribute to smooth and low-shock blowback operation.

Ergonomics of its ribbed and rough-textured polymer frame and machined steel slide are noteworthy, with all surfaces comfortably rounded and no angular protrusions to hang up when pulling it out of a holster, handbag or shirt. Different sized hands are easily accommodated by a selection of interchangeable back straps and the double stack magazine floorplate comes with or without a last finger extension. Grooves and slots in the frame accept a wide range of tactical accessories like laser pointers or mini-lights.

Both the slide catch lever and mag release are ambidextrous for easy operation and a red insert on the extractor serves splendidly as a chamber loaded warning indicator. The fixed square “U” notch rear sight and post front are marked by big white dots for low light shooting.

P2000 Technical Specifications

Caliber: 9 x 19mm, 13 rounds capacity
System of Operation: Recoil, modified Browning locking system
Overall Length: 178 mm
Barrel Length: 92mm
Sight Radius: 140mm
Height & Width: 128 x 34mm
Weight: 620 grams unloaded

2002

Military, industry and law enforcement and government professionals who need to keep up with the latest in weapons technology are encouraged to join the National Defense Industrial Association and attend the 2001 International Infantry & Small Arms Symposium and Exhibition. This is currently scheduled for 13-16 May 2002 in Atlantic City, NJ, but up-to-the-minute information and registration is available at www.ndia.org or write to NDIA, 2111 Wilson Blvd., Suite 400, Arlington, VA 22201.