Enter the P-IX+ PFA. Convert your Glock pistol into a true pistol carbine experience. If you already have a Recover Tactical P-IX or P-IX+, you’ll just need to add Recover Tactical’s Shroud Adapter & 16-inch barrel. With the 16-inch barrel, you step out of the grey zone and no longer need to register your firearm as an SBR! For a limited time, save $100 on the P-IX to Carbine Conversion kit.

If you need the whole shebang, you can get Recover Tactical’s Full P-IX + Pistol Carbine Kit here.

By J.M. Ramos

Over the years since its initial adoption as the official U.S. military sidearm in 1911, the legendary Colt .45 automatic has seen countless upgrading that includes mechanical redesigns such as double action conversions, high capacity magazine enhancement, cosmetic improvements and the introduction of many recoil reduction devices that were made popular by the action shooting circuits of the 80s and the 90s. In the aesthetic department, it was the custom grip that never ran out of style. The market is continually flooded with stylish 1911 pistol grips that are made from so many different materials; from aluminium, titanium, ivory, stag, exotic woods and the popular G-10 fiberglass composite just to name a few. This line of custom grips comes in different patterns and checkering cuts to maximize purchase and overall appeal. Despite all the differences in materials, color and styling, they all share the same commonality – plain and slab sided. That old tradition in 1911 grip innovation is about to change with the introduction of the revolutionary Recover Tactical CC3 grip system. The CC3 is truly a superb 21st century upgrade for the veteran service handgun. The unique design and styling of the CC3 can be attributed to the exceptional talent of Tamir Porat, a world renowned Israeli weapon engineer, also responsible for the creation of the Tavor combat rifle recently adopted by the Israeli Defence Forces. With his impressive firearm design background, it’s not surprising that Mr. Porat was able to accomplish a remarkable feat when creating his CC3 grip system. It has truly benefited the 1911 aficionado on a tight budget by instantly transforming this century old warhorse to an ultra-modern pistol equalizer capable of accepting tactical wares such as weapon light, laser and even vertical grip (where allowed by law) for maximum control with
a large pistol caliber.

The CC3 grip system consists of two halves that virtually cover the receiver (frame) of the pistol except the back side where the main spring housing and grip safety is located. It is made of high-grade polymer – the same material used on the Tavor rifle. The CC3 is tailored to be a universal fit to a standard 1911 type pistols. While most 1911 pistols produced by various gun manufacturers are designed to Colt specifications, there are some makes that differ in certain areas – primarily in the grip fore-strap contour for raised checkering purposes and the dust cover being beefed up a bit for strength and added weight as an aid to muzzle flip reduction without the aid of a muzzle device. To check out the fit of the CC3 with various 1911s, the grip was installed to the Series-70 Colt; then to the Caspian Arms, utilizing an early manufacture frame kit. The fit to the Colt Series 70 frame is near seamless with just a tiny line appearing below the trigger guard. On the Series-80 gun, the CC3 grip fit perfectly and seamlessly. The Caspian frame kit on the other hand had a very prominent .042 inch wide gap at the front of the grip. This could be the result of the added material from the raised checkering as well as the overall contour and dimension of the front strap radius. Another production brand 1911 pistol that has the same issue in this area is the Taurus PT 1911. Both 1911 frames have a noticeable square edge at the rim of the front strap (not a full radius like Colt) precluding a seamless fit. The large ribbings on all sides of the CC3 afford excellent purchase and the portion of the grip that covers the front strap improves the ergonomics. The CC3 appears to have better feel and ergonomics than any 1911 grip this author has tried before (wood or plastic). The styling is great, the material is light and strong but most of all, it offers the versatility of a railed 1911 pistol at a fraction of the price all without the
added weight and bulk.

Installation of the CC3 to the pistol is quite straightforward and takes about three minutes to complete. Simply remove the original grip of the gun and substitute the Recover. The only added work is the installation of the two small screws (comes with the kit with a hardware) that tightens the front end of the part. The halves are surprisingly snug when mated to the frame with no looseness whatsoever once all screws are tightened. The cut out for the magazine catch is very well thought out providing easy access, while the opposite side has an identical profile that gives the trigger finger excellent clearance for trigger reach and pull. In addition, the CC3 thumb safety clearance is also commendable focusing primarily on the shooter’s comfort and ergonomics. The profile on this area is also the same on both sides, truly ambidextrous and very nicely done. The CC3 fully encloses the dust shield of the frame and extend just a bit to increase the length of the rail and was perfect for the TLR weapon light, SIG-Arms mini-laser and Fab Defence folding front grip (made for a Glock pistol) for PDW conversion. Naturally, it is even more exciting to dress up a vintage 1911 carbine utilizing a detachable shoulder stock to a more sophisticated modernized PDW conversion complete with a folding front grip. In Canada this setup is perfectly legal for restricted firearms license holders. In the USA, stocked handguns or a handgun with a forward grip falls under a different class of weaponry and is subject to NFA rules and regulations. Having a forward grip on a railed stocked handgun makes a lot of difference in weapon control and comfort. It provided the handling characteristic of shooting a short barrelled rifle. The stock and grip in the carbine set-up really does make a lot of difference and it’s quite pleasurable to shoot specially with a compensated top end or a long slide with a match barrel. This can only be accomplished with a railed frame and the CC3 system made this all possible almost instantly without all the extra work or expense.

Although the overall design characteristics of the CC3 is quite impressive, there is still a little bit more room for improvement to further enhance its ergonomic and user friendliness. One desirable feature that can be incorporated with the system is an elevated serrated thumb rest to be positioned just forward of the slide stop and behind the CC3 marking on the dust cover. This would be a perfect location for locking the thumb of the non- shooting hand in a two hand hold position to attain maximum control of the gun as well as comfort. The built-in thumb rest can be made ambidextrous for all shooters and ideally the same height and profile as the slide stop serrated section. The right half of the grip of the CC3 first production batch has no cut for an ambidextrous safety. The ambidextrous cut is now incorporated on the latest production grips. A square bottom type grip for Smith & Alexander type mag-wells for those who prefer to use this popular accessory as an aid for speed reloading would also be a welcome addition to the series. A very useful tactical accessory for the CC3 that can be put to a good use is an optional one-piece scope mount that can be slid and secured directly to the rail of the grip. The mount will shroud the top of the slide just forward of the ejection port to allow unobstructed ejection of empty shell during firing. The top of the mount that covers the portion of the slide would have a built-in rail similar to that one already incorporated in the CC3 for mounting a small red dot or reflex type optic. The scope mount can be tailored to have a clearance underneath the shroud for aiming with an iron sight without removing the mount in the event the optic becomes unserviceable. If the overall dimension of the bridge module that encloses the slide can be kept streamlined and flat, it can be a phenomenal outfit for defense, competition or hunting purposes. A very versatile hi-quality optical mounting system is currently available for this tactical set up. It is called the handgun Universal Scope Mount (USM) by Fab Defence, one of Israel’s leading weapon accessory producers. This accessory is made from CNC machined 6061 T-6 aluminum and beautifully anodized to match any handgun finish. The USM features a top and bottom rail system allowing the mounting of an optic at the top and the bottom for a folding forward grip such as the Tactical Folding Fore-grips (FGG-S and FGGK-S for Glock pistols) also made by Fab Defence. Unfortunately, the USM is not compatible for use with the CC3 due to the low position of the rail in comparison to rails cut directly to the frame of the pistol. The good news is there is an alternative mount to the USM that can be used with the CC3 and is available from SIG Sauer called bridge mount. This accessory is made of high strength polymer and a bit bulkier than the USM but lighter. The bridge-mount features top rail (for miniature reflex type optic) and bottom rail (for weapon light, laser or forward grip). Just recently, Recover Tactical expanded their grip system series with the introduction of the new BC2 grip system for the Beretta 92F pistol.

Sources

www.recovertactical.com
www.fabdefence.com
www.missionfirsttactical.com
www.sig-sauer.com

By Chris A. Choat

Serious Stopping Ammunition from G2 Research

G2 Research announces a new subsonic .300 AAC Blackout-caliber round for hunting or tactical use. The new G2 Research 300 Ripout Round produces a massive wound channel that ensures hunters of an accurate, sure and swift kill. This new subsonic (suppressor-friendly), premium-grade, 200-grain .30 caliber round quickly expands at reduced velocities, creating a devastating, energy-depositing wound channel of one inch or more. Bullet weight retention is an astounding 98 to 100 percent, which creates more than 17 inches of soft tissue penetration. Free from the massively overdone hydrostatic shock prevalent in so many of today’s ultra-high-velocity loads, the sub-sonic G2 Research 300 Ripout Round will kill ‘em quick and quietly without turning good game meat into useless jelly. Individually manufactured in highly specialized CNC machines, each expensive-to-make bullet is precision machined to open up within the first two to three inches of impact, resulting in a controlled expansion of three large copper petals called tridents that make up the first half of the bullet. (A .30 caliber bullet, for example, will expand between 1 and 1.5 inches while the bullet shank remains attached for controlled penetration even at subsonic velocity.) The new Ripout round has a velocity of 1,020 feet per second and has a retail price of $54.99 for a 20 round box. You can get more information at www.G2Rammo.com.

IWI US Brings Back the Legendary Jericho Pistol

IWI US, Inc., a subsidiary of Israel Weapon Industries (IWI) Ltd., proudly announce the return of the Jericho brand of pistols to the U.S. market. The Jericho 941, designed specifically for the U.S. market, will be available in both steel frame and polymer frame models. Since it was originally designed based upon the highly regarded CZ-75 model, the Jericho has been imported into the U.S. under several names including Jericho 941 from KBI when first introduced, UZI Eagle from Mossberg and Magnum Research’s Baby Eagle. IWI US is pleased that the Jericho 941 has come full circle and arrived home. The Jericho 941 steel frame, semi-auto, short-recoil model will be available in full-size and semi-compact in 9mm, .40 S&W and .45 ACP caliber. The pistol features adjustable sights, an integral Mil-Std 1913 rail, an ergonomic grooved pistol grip and ships with 2 magazines in a lockable carry case. The Jericho 941 polymer frame with steel slide, semi-auto, short recoil model is also available in 9mm, .40 S&W and .45 ACP calibers in a full-size and semi-compact frame. All features are the same in the polymer version with the benefit of reduced weight. Unlike the Baby Eagle, UZI Eagle and earlier versions of the Jericho 941 imported by KBI that had a slide mounted de-cocker system, this new Jericho 941 utilizes the more desirable frame mounted safety, a la CZ75.
Jericho 941 pistols are used by civilians and elite forces around the world including the Israeli police. IWI US will also carry CO, CT, DC, HI, IL, MD, NJ and NY compliant pistols with 10-round magazines (no models available for CA and MA). For more information contact them at www.iwi.us.

Krebs Custom Flash Suppressor For AR Pattern Rifles

Krebs Custom is now producing its very effective 4-prong flash suppressor for installation on AR-pattern rifles. Threaded 1/2-28 for rifles in 5.56/.223 caliber, these 2.25-inch, 2.5 oz. flash suppressors are made from heat-treated 4140 steel for durability, with a black oxide finish. Flat sections on either side permit the use of a wrench, and a “crush” washer is included to keep the unit in place. Retail price for these new flash suppressors is $70. They can be reached at www.krebscustom.com.

New Techna Clip for Handguns Offer Ultimate Concealed Carry

Even the best conceal carry holsters add unnecessary bulk and weight. Techna Clip offers an excellent alternative for conceal carrying a gun that is even more comfortable. Gun belt clips also make any firearm much easier to truly conceal while in public. If you are ready for an incredibly comfortable and unbelievably discreet method for concealing your pistol – then witness the Techna Clip – a truly minimalist solution for those who conceal carry. It’s a concealable gun clip that easily attaches to your sidearm to deliver a secure, lightweight and discreet carry option – without a holster. The Techna Clip installs in just moments, with no modification to your firearm. Securely conceal your pistol in your pocket, inside your waistband, or even in the small of your back – with confidence. The “zero-bulk” design of the Techna clip allows users to securely attach a gun to their belt, pocket, or waistband. Users experience maximum comfort with these lightweight clips. The Clips are constructed of high quality carbon spring steel with a Black Teflon coat that will not mar the finish of the handgun. Techna Clip make these clips for a wide range of gun models. Techna Clips are 100% satisfaction guaranteed. For more information, visit their website at: www.Technaclip.com.

New Tripod Shooting System from Ashbury Precision Ordnance

Ashbury Precision Ordnance (APO) Manufacturing introduces the new RSTA-II Tripod Shooting System for Rifle Sports focusing on long range hunting, practical/tactical rifle competition, and professional marksmen. The RSTA-II Tripod Shooting System allows long gun users to shoot from a variety of alternate shooting positions while standing, kneeling or sitting whether on flat ground, rock strewn, steep mountainous or complex urban terrain. The 1.1 pound RSTA-II Tripod Head allows users to position long guns using the Rapid Control Handle (RCH), which can be set up for either right or left hand control. This versatile tripod head provides a positive locking ±35 degree head that can securely hold a 25+lb long gun using a 6 o’clock accessory rail grabber, Pig Saddle or APO AnyPoint Bipod/Tripod Mount. RSTA-II Tripod Shooting Systems offer users a maximum shooting height of approximately 68 inches and collapses to approximately 29 inches using Quick Power Lock leg latches. The standard duty RSTA-II Tripod Shooting System uses the stable, yet lightweight Manfrotto 190XPROB alloy tripod base that is suggested for long guns up to 15lbs. This tripod base uses 3-section legs that collapse into a highly portable field shooting platform at only 5.5 lbs. The extreme duty version of the RSTA-II uses the Manfrotto 055XPROB, a heavy duty tripod base with larger diameter 3-section tripod legs weighing 6.6 lbs. that flexes less under heavier loads of up to 20 or more pounds. The RSTA-II allows shooters to track, lock and when ready accurately engage distant targets without fatigue. In rugged field testing for more than 18 months RSTA-II Tripod Shooting Systems were live fire tested with a wide range of rifles including the M107 .50BMG. Long-gun shooters can interchangeably mount semiautomatic carbines, shotguns, and a wide range of hunting and tactical rifles on RSTA-II Shooting Tripod platforms. Variable power spotting scopes are also easily mounted on the RSTA-II platform using the common 1/4×20 detachable baseplate, or clamped snugly inside the Pig Saddle. One tripod system, many uses. For more information go to www.ashburyprecisionordnance.com

Recover Tactical Offers Rail Grip for Bereta 92/96

Recover Tactical is proud to announce the release of the new Recover BC2 grip and rail system for the Beretta 92/96 series of pistols. The Beretta grip and rail system follows on the success of Recover’s CC3 grip and rail for 1911s. The patented design of the BC2 adds a fully functional Picatinny rail to the Beretta and can be easily installed in about three minutes without a gunsmith. Just like Recover’s popular 1911 grips, the new Beretta BC2 grip and rail system was design by world renowned Israeli weapons designer Tamir Porat (Porat also designed the IWI Tavor assault rifle). The BC2 grip is manufactured in Israel from the same high-grade, glass-reinforced polymer used by many polymer gun manufacturers. The Recover BC2 will not scratch or damage your gun. Weighing in at only about 65 grams it will not significantly change the weight of your gun or the thickness of the grip. The Recover Beretta grip and rail system is currently available in black, desert sand, OD green and digital camo and comes with a limited lifetime warranty. Retailing for only $49.99, the BC2 is the easiest and most affordable way to add a full Picatinny rail to a Beretta. Visit them at www.recovertactical.com.

Italian Gun Grease Offers Tactical Lubricant for Extreme Conditions

Italian Gun Grease (IGG), leaders in the field of firearms lubricants and cleaners, offer shooting enthusiasts its Tactical Lubricant Formula. Italian Gun Grease’s Tactical Lubricant was engineered for use in extreme conditions, conditions that other lubricants simply can’t handle. In a combat situation or shooting competition it’s important that your gun shoots straight and fast every time. The Tactical Formula penetrates deep into the metal itself leaving a slick surface that inhibits carbon, copper and lead build up. Italian Gun Grease’s Tactical Lubricant reduces friction, increases muzzle velocity, lowers standard deviation, reduces malfunctions and extends the life of a firearm. The Tactical Formula uses state-of-the-art HSM Technology (heat seeking molecule) and it won’t burn off in even the most extreme temperatures. It has a working temperature of -40 to 1,000 degrees. The Tactical Lubricant Formula is available in various amounts starting at the 2 ounce size. The 2 ounce size MSRP is $7.95. For more information, visit www.italiangungrease.com.