Here is Windham Weaponry’s statement as seen September 12, 2023:

It is with deep regret that we announce the closing of Windham Weaponry. Our website/online retail ordering system will remain active through Tuesday night, Sept 12. We will do our best to ship all orders this week and early next week. No credit card will be charged until the order is shipped.

Twelve years ago, when we started Windham Weaponry, our shareholders and longtime employees were excited to continue the traditions and spirit of Bushmaster Firearms, after the new owners decided to leave Maine.

We built WW into a company we could be proud of providing outstanding customer service, high quality products, as well as a great place for our dedicated employees to work.

The last few years have been a very challenging time for the firearms industry, and we have struggled to keep the WW dream alive for as long as possible. Unfortunately, we have not been able to meet our loan obligations with the bank after they worked with us as much as they could.

There was a glimmer of hope when we were negotiating with an investor to help keep WW alive and healthy, but that just fell through.

We have begun discussions with Keenan Auction Company to determine the best course of action for a full liquidation which should happen within the next month or so.

Our shareholders and employees truly appreciate your loyal support all of these years.

Red, white, and polished blue steel. The 4th of July is a celebration of freedom, and America’s freedom was forged through courage and gunpowder. We’re looking back at the top 25 American guns of all time, and the competition is fierce. Most of the featured firearms are offered in Rock Island Auction Company’s upcoming August Premier Auction, along with a few examples from past events.

Iconic American arms from every era will be featured in Rock Island Auction Company’s August Premier.

The Kentucky Rifle

One of the first truly iconic arms of America was pioneered by German and Swiss gunsmiths who immigrated to the Colonies in the 18th century. Popularly known as the Kentucky Rifle or Pennsylvania Rifle, the American Long Rifle allowed accurate shooting up to 200 yards or more, a decisive advantage to backwoodsmen while hunting in the western wilderness or sniping Red Coats during the Revolutionary War and War of 1812.

A John Armstrong Maryland Golden Age flintlock American Long Rifle, an extraordinary example of one of America’s best guns of all time. Available this August.

Colt Model 1851 Navy

A personal favorite of Samuel Colt, the Model 1851 Navy was one of the most prevalent sidearms on both sides of the American Civil War, even serving as the basis for numerous Confederate produced brass-frame revolver styles like the Griswold & Gunnison Revolver and the Leech & Rigdon revolvers. The sturdy sixgun’s impressive production numbers, widespread use on the American frontier, and status as the favored revolver for Western legends like Wild Bill Hickok, Buffalo Bill Cody, and countless early gunslingers elevate the 1851 Navy to one of best American guns of all time.

An exemplary cased, early factory engraved Colt Model 1851 Navy revolver with extremely scarce gold plated grip straps. The Navy set the standard for countless black powder revolvers, earning a clear spot on any list of iconic arms of America. Available this August.

The Sharps Rifle and Carbine

The various models of Sharps rifles and carbines earned a reputation as iconic arms of America in the Civil War, the Old West, and in popular culture thanks to films like ‘Quigley Down Under’ and ‘True Grit.’  Produced from the Antebellum Era through the late-19th century and noted for their exceptional accuracy and reliability, the Sharps filled a key role during the Civil War when the Union purchased approximately 80,000 Sharps carbines and almost 10,000 rifles. Specially ordered Sharps rifles were famously fielded by the 1st and 2nd U.S. Sharpshooter Regiments (the Berdan’s Sharpshooters) to great effect.

A historic Sharps Model Model 1853 “John Brown Sharps/Beecher’s Bible” slant breech percussion carbine documented as shipped to abolitionist General Samuel C. Pomeroy in Kansas during the Bleeding Kansas period. For its role in revolutionizing sniping tactics, the Sharps rifle platform wins a nod as one of America’s best guns of all time. Available this August.

The Springfield Model 1861 Rifle-Musket

The Springfield Model 1861 rifle-musket became one of the most prolific Northern rifles issued during the Civil War, taking the field in quantity from 1862 onward, from Shiloh to Appomattox. With over 1 million being produced during the conflict by Springfield Armory and two dozen other firearm producers, the dependable .58 caliber rifle improved precision over infantry traditional musket. This percussion powerhouse finds a worthy spot on our list of America’s best guns of all time thanks to its role in winning the Civil War, protecting workers on the Transcontinental Railroad, and serving as the material platform for a line of Springfield breechloading rifles that would culminate with the 1873 Trapdoor.

An outstanding Civil War U.S. Springfield Model 1863 Type II/1864 percussion rifle-musket, the final iteration of one of the most iconic arms of America. Available this August.

Remington Rolling Block

Developed from the Remington “Split Breech” carbine, a Civil War gun designed to fire the same cartridges as the Spencer repeater, the Remington Rolling Block family became not just one of the most iconic arms of America but a popular longarm around the world. As the most widely used single shot military breechloader of the 19th century, the Remington Rolling Block’s service record is expansive. The gun was produced in a variety of calibers, both rimfire and centerfire, and its action was sturdy enough to easily accommodate the increased pressure of new smokeless powders hitting the market in the late 1890s.

An impressive example of one of the best frontier guns of all time, this Remington No. 1 Rolling Block long-range target rifle sold for $8,050 in RIAC’s May 2021 Premier Auction.

The Colt Single Action Army

The Colt Single Action Army revolver is a no-brainer inclusion for any best guns of all time list. Possibly the most famous firearm ever made, “Judge Colt and His Jury of Six” was first adopted by the U.S. Army in July 1873 and went on to serve as the choice sidearm for countless lawmen, cowboys, homesteaders, and desperados who came to define the American frontier. For 150 years, the Colt SAA has prominently appeared in dime novels, radio shows, film, and television, and today continues to represent the enduring spirit of the American West.

An Ainsworth inspected Lot Five U.S. Cavalry Colt Single Action Army revolver with a Kopec Gold Seal letter, a stunning early example of one of the most iconic arms of America. Available this August.

The Winchester 1873

A well-armed frontiersman carried a Colt on his hip and a Winchester over his shoulder. As the successor to the Henry rifle and the 1866 Yellowboy, the Model 1873 put the name Winchester on the map and went on to conquer the open range. Dubbed “the Gun that Won the West”, the Winchester ’73 became a symbol of freedom and self-determination on the American frontier. From movie sets to modern-day cowboy action shooting competitions, these iconic arms of America have stood the test of time.

An exceptional example of one of the best guns of all time, a special order deluxe Winchester Model 1873 rifle. Available this August.

Winchester Model 94

The Winchester Model 1894 hit the scene too late to see the height of the American Wild West, but the rifle certainly kept Winchester’s frontier legacy alive. The Winchester 94’s balance and slim profile made it a favorite walking gun for hunters, ranchers, and law enforcement who appreciated the power and reliability of Winchester’s .30-30 WCF smokeless cartridge. The classic lever gun’s accuracy, simplicity, and rugged resilience earned it a place in millions of gun racks across America. In terms of tried-and-tested hunting arms, the Winchester Model 94 is hands down one of the best guns of all time.

A pre-64 Winchester Model 94 carbine with its original box, an outstanding example of one of the most iconic arms of America. Available this August.

Smith & Wesson Military and Police and Model 10

What qualities should a model have to be considered one of the best guns of all time? Production numbers? Versatility? Fame? The Smith & Wesson .38 Military & Police series checks all those boxes and more, remaining in continuous production for over a century and becoming the overwhelming favorite sidearm of countless police forces and militaries around the world. Later renamed the Model 10, this iconic revolver became the most produced wheel gun platform of the 20th century and a mainstay of nearly every police department around the country well into the 1980s. Now that’s an American success story.

As iconic arms of America go, it doesn’t get much better than a classic Smith & Wesson. This factory engraved .38 Military & Police Model of 1905 Fourth Change revolver sold for $4,025 in December of 2020.

Marlin Model 39A

The first lever action chambered in .22 LR, this classic Marlin went through a number of name changes over the last 132 years. Releasing as the Marlin Model 1891, the gun was redubbed “Bicycle Rifle” in 1897, then again renamed to Model 39 in 1922 before finally embracing its most famous iteration in 1939 in the Marlin 1939A.  As the longest continuously produced rifle in the world and the lever action Annie Oakley made famous, the Marlin Model 39A and its predecessors are undeniably iconic arms of America.

A scarce Marlin 90th anniversary Model Golden 39A rifle sold for $4,313 in December of 2021. As .22 rifles go, one of the best guns of all time.

Winchester Model 1897 Shotgun

One of the best guns of all time in terms of military shotguns, the Winchester Model 1897 shotgun was popularized as a sporting arm before finding a role during the Philippine-American War. In WW1, the Model 1897 was officially adopted as the U.S. “Model of 1917 Trench Shotgun” and modified with a bayonet lug, a heat shield, and a shorter barrel for maneuverability in the trenches of Western Europe. The shotgun and its slam fire heroics proved effective enough to earn a diplomatic protest from the Germans, who claimed that America’s use of trench guns caused “unnecessary suffering.”

The Winchester Model 1897 slide action trench shotgun earned a larger-than-life reputation in WW1 and has become one of the most iconic arms of America. Available this August.

1903 Springfield Rifle

Not all iconic arms of America were born in the Land of Stars and Stripes. Based on the German Mauser bolt action, America took the design and made it their own with the Springfield Model 1903 rifle. Initially chambered in .30-03, the rifle suffered from poor trajectory and excessive barrel wear. However, by chambering a lighter, spitzer bullet and a cooler burning propellant, a legend was born in the .30-06 cartridge, and battlefield and deer stand would soon feel the wrath of the mighty Springfield Model 1903.

One of the best guns of all time by sheer production numbers, the U.S. Springfield Model 1903 rifle is still widely fielded by shooters and hunters today. This rare example is equipped with the innovative 1918 Mark I Pedersen Device.

The Colt 1911

As the longest-serving military sidearm in American history, the legendary Colt 1911 pistol is going to find itself in any best guns of all time discussion. The brainchild of John Moses Browning, this .45-caliber magazine-fed semi-automatic pistol set a new design standard that helped the United States become back to back World War champs and continues to be carried by numerous American officers to this day. The M1911 design has been widely emulated, with few major changes made to the pistol’s internals over the decades, a testament to the gun’s exemplary performance record.

A scarce 1937 production Colt U.S. Navy contract Model 1911/1911A1 transitional semi-pistol. The 1911 pistol is easily one of the most recognizable and iconic arms of America. Available this August.

Browning Auto-5

John Browning was said to consider the Auto-5 his greatest achievement, a bold statement from the prolific gun inventor and more than enough to earn the famous “Humpback” a solid ranking among the most iconic arms of America. Browning’s 1903 recoil-operated design was a versatile workhorse for all types of fowling and target shooting. This sturdy scattergun continues to be fielded by the modern sportsman today and holds the title of second-best autoloading shotty of all time.

As the first successful semi-automatic shotgun, the Auto-5 should be considered one of the best guns of all time. The fantastic example below is a double signed, engraved and gold inlaid Belgium Browning Gold Classic Auto-5 with its original box. Available this August.

The Thompson Submachine Gun

In terms of cultural impact and a notable service record in WW2, Hollywood’s favorite gangster weapon merits consideration as one of the best guns of all time. Designed by John Thompson, the fully automatic Tommy Gun was completed too late to fill its intended role as a WW1 trench sweeper. The inventor subsequently marketed the weapon to everyone from law enforcement to ranchers, but the deadly submachinegun found an unexpected niche with organized crime. On the eve of WW2, the Thompson submachine gun was adopted by the U.S. military and employed by the British as well, with over 1.5 million of the new military-issued M1928A1 and M1A1 produced. This earned the weapon international recognition through German and Japanese propaganda posters that portrayed the U.S. and her allies as Tommy-toting gangsters.

From mafia to military to Hollywood, the Thompson became one of the most iconic arms of America. This fantastic example is a police documented Colt Thompson Model 1921 that includes a case and extra magazines. Available this August.

The M2 Machine Gun

A good portion of John Browning’s inventions have become iconic arms of American history, including the famous M2 Heavy Machine Gun. Affectionately dubbed “Ma Deuce” and “The Mother of All Machine Guns” by the troops who continue to rely on its .50 caliber firepower, this air-cooled, belt-fed behemoth has stood the test of time like few other firearms. As a U.S. military mainstay since the 1930s, the M2 has touched the battlefield in every major American conflict from WW2 onward.

One of the best guns of all time, this M2 machine gun lived up to its iconic reputation and sold for a stunning $94,000 in RIAC’s May Premier.

Ithaca 37

Hailed by many hunters as one of the best guns of all time, the Ithaca 37 shotgun is a legendary platform inspired by the ideas of John Moses Browning and John Douglas Pedersen. This pump action icon quickly found a market after its 1937 release and never looked back, becoming the longest continuously-produced shotgun in American history and earning a reputation as a versatile autoloader that was well suited for field, police, and military duty alike.

One of the most iconic arms of America in terms of longevity and adaptability, this USSF marked Ithaca Model 37 Special Forces trench-style shotgun highlights the platforms role as a military weapon. Available this August.

The M1 Garand

In the list of iconic arms of America during WW2, the M1 Garand might be number one. Fielded by millions of American GIs, General George Patton once hailed the rifle as, “the greatest battle implement ever devised.” The .30-caliber M1 Garand served as the standard U.S. infantry rifle from 1936 to 1959 and it continued to see use as late as the Vietnam War. From Saving Private Ryan and Band of Brothers to the Call of Duty video game series, few weapons can symbolize America’s valor in WW2 better than John Garand’s iconic rifle.

An exceptional WW2 U.S. Winchester “WIN-13” M1 Garand. For its role as WW2s most successful semi-automatic infantry rifle, the M1 Garand can be hailed one of the best guns of all time. Available this August.

The M1 Carbine

Another red-blooded American gun that complimented the M1 Garand’s high-volume fire, the M1 Carbine offered an effective firearm sized somewhere between a rifle and a pistol that was ideal for units like paratroopers, drivers, weapon crews, intelligence officers, and communications personnel who required a lighter burden. One of the best guns of all time thanks to its spectacular service history, the M1 carbine helped lead the United States to victory in Europe and the Pacific theater then went on to become widely owned and fielded after the war thanks to an abundance of WW2 surplus.

Winchester Model 70

If you’re widely known as the superlative bolt action rifle, chances are you’re going to make America’s best guns of all time list. Enter the Winchester Model 70. Widely dubbed “the rifleman’s rifle,” the Model 70 has gone through numerous changes and iterations over its nearly nine decades of production and is chambered to take everything from white-tailed deer to African dangerous game. The gun served the United States Marines as their precision rifle during the Vietnam War, famously fielded by Gunnery Sergeant Carlos Hathcock, who used the mighty Model 70 during most of his 93 confirmed kills. Today, the Winchester Model 70 continues to find favor with shooters and collectors, the latter preferring the desirable “Pre-64” production model.

One of the most iconic arms of America, the Winchester Model 70 is instantly recognizable to nearly every sporting gun enthusiast. This rare documented U.S. property marked Winchester Model 70 “Van Orden Sniper” rifle includes an 8x Unertl U.S.M.C. sniper scope and case and a CMP Certificate of Authenticity. Available this August.

Smith & Wesson Model 29

Elmer Keith and Clint Eastwood helped elevate the .44 Magnum Smith & Wesson Model 29 into one of the iconic arms of America. Elmer Keith had long been advocating for a more powerful version of the .44 Special cartridge. In 1955, Remington Arms introduced the .44 Remington Magnum cartridge, while Smith & Wesson delivered a revolver to chamber the beast. The S&W Model 29 found niche success with handgun hunters, law enforcement, and revolver lovers before launching into the stratosphere thanks to 1971’s ‘Dirty Harry.’ While this powerhouse pistol has been since surpassed by monsters like the .500 S&W Magnum, for a time Dirty Harry’s revolver truly was the most powerful handgun in the world.  

A Smith & Wesson Performance Center Model 29-5 revolver from the Hank Williams Jr. Collection sold for $10,350 at RIAC in September 2021. For it’s power, aesthetic, and cultural appeal, the Model 29 family earns a nod as one of America’s best guns of all time.

Remington Model 870

With over 12 million in circulation and counting, the Remington Model 870 should be considered a candidate for any top 25 best guns of all time list. A shotgun known for its rugged reliability, the Model 870 has lent itself perfectly to every need over the last seven decades. Game wardens, duck hunters, police officers, and Vietnam Navy Seals have all shouldered the Model 870, and the gun is featured in nearly every modern film and TV show involving law enforcement, zombies, or action of any sort. One would be pressed not to find an example of this robust shotty in every town across the United States, and it continues to sell as the recently introduced Remington 870 Fieldmaster.

This example of a Remington Wingmaster 870 realized an astounding $38,188 in RIAC’s December 2021 Premier Auction, an impressive example of one of the most iconic arms of America.

The M60 Machine Gun

First issued in 1959, the M60 machine gun was an attempt to combine the firepower of the M1919 Browning with the relative mobility of the BAR. What resulted was one of the most iconic arms of America, a 23-pound belt-fed beast that could eat a ton of  7.62mm ammo and chew through anything down range. The M60 often found itself in the mud and muck during combat, and its relatively slow cyclic rate made this heavy hitter sound akin to a grunting boar. The Pig humped, sailed, and soared through Vietnam, Operation Just Cause, and the Persian Gulf War and continues to see service in specialized roles today.

Inspired by the German FG42 and MG42, the M60 became one of America’s best guns of all time. Available this August.

Marlin Model 60

For years, Marlin billed the Model 60 as “the most popular 22 in the world.” Whether that’s enough to also call this prolific semi-auto one of the best guns of all time is up for debate, but it certainly ranks as an American essential. Introduced in 1960, Marlin’s semi-auto .22 LR tack driver remained in production for six decades and was carried by generations of Americans who fell in love with its resiliency and ease of use. For target shooting, plinking, and small game hunting, the Marlin Model 60 is a true American classic.

Caleb Savant from Brownells shows off the Marlin Model 60, one of the most iconic arms of America.

The M16

Adapted from the famous ArmaLite AR-15 platform, the M16 offered an all-in-one battle rifle that could excel at both distance combat and close-quarter fighting. Though the refinement of the M16 was not without its hurdles, the rifle’s updates and successors soon stepped up to the challenges of modern warfare and became the longest-serving infantry long arm in U.S. military history, a contemporary defender of Lady Liberty, and one of the indisputably iconic arms of America.

Who doesn’t need a Colt M16A1 selective fire rifle in the 9 million serial range? Available this August.

Iconic Arms of America

While our top 25 list includes some undeniable American icons, there are countless gun models that could be considered legends in their field. For their historic influence, market success, or cultural impact, a few honorable mentions include the Colt Walker, the Hawken rifle, the Derringer, the Gatling Gun, the Winchester Model 1895, the Colt Detective Special, and the Winchester Model 21 shotgun, and examples of all these gun collecting cornerstones can be found at Rock Island Auction Company.

Perhaps the most influential non-firearm weapon in American history, the Bowie Knife carries a fascinating story in its own right. This rare Tillotson Sheffield patriotic “Gold Hunters Knife” Bowie knife is available this available this August.

Eliminate Zombies Quietly with Thompson Machine Suppressor

If you have ever had the need to get rid of those pesky Zombies in your backyard and do it without alerting the rest of the pack, then Thompson Machine has just the tool for you. Their newest suppressor is called the Zombie XL and is in caliber .22 Long Rifle. The Zombie XL is a special edition, limited run, suppressor with only a small number of units being produced. The new suppressor is 6.375 inches long with an outside diameter of 1.125 inches and weighs just 4.5 ounces. Made from 6061 T6 aluminum, this new unit features a mono-core design that allows it to be easily taken apart for cleaning. Both front and rear end caps thread onto the core allowing for a “threadless” outer tube. The end caps also incorporate high temperature “O” rings that completely seal the unit for even better noise suppression and keeps grime out of the internal threads. The tube, end cap and mono-core have a flat black anodized finish to match most Zombie killing firearms. The outside of the suppressor’s tube is engraved with a special “biohazard” symbol that not only let everyone know that this is a special suppressor but also allows for a textured gripping surface to aid in attaching or removing it. The Zombie XL has 1/2 x 28 threads to fit most .22 LR Zombie eliminators. This new suppressor will also be produced without the special “biohazard” markings and will be known as the ISIS 22. The Zombie XL is also full-auto rated and most people that have heard it say that when shot it had a “dead” tone. For more information or to order one of these special suppressors, contact Thompson Machine, 172 Center Street, Panacea, FL 32346. Phone: (850) 408-5161. Website: www.thompsonmachine.net.

CrossBreed Introduces New OWB Mag Carriers

Top quality holster manufacturer CrossBreed Holsters, LLC is proud to introduce the new OWB Mag Carriers for 2012. Carrying spare magazines is always a good idea and frankly, a life-saving decision at times. CrossBreed Holsters is pleased to provide yet another option for doing so. Their OWB Mag Carrier has been completely redesigned for better concealment and, most importantly, easier access to the mags. With a cut down backer, forward rake, and more exposed magazine to grasp, reloads are swift and sure. Great retention ensures your mags stay put and a high ride keeps them concealed under a light cover garment. The OWB Mag Carrier is available for carry of one or two spare mags for all popular firearms. MSRP starts at $36.25. The OWB Mag Carrier comes with their two week try it free guarantee and lifetime warranty, just like all of their other fine products. For more information contact CrossBreed Holsters, LLC, 224 N. Main, Republic, CO 65738. Phone: (888) 732-5011. On the web at www.crossbreedholsters.com.

Volquartsen Custom Redesigns LLV Barreled Receiver

Volquartsen Custom has redesigned its popular LLV upper designed for the Ruger MKII, MKIII and 22/45 target pistols. The LLV Barreled Receiver has been completely redesigned for 2012. A great design has been made even better – better balance, more versatile and yes, even better accuracy! A hard anodized CNC machined billet receiver is the foundation of this lightweight setup. The complete barreled receiver weighs less than 15 oz. The receiver and barrel shroud are precision machined as one piece from aluminum alloy. An integral Picatinny Rail is machined into the top of the receiver. It is then fitted with a 6-inch precision stainless steel barrel that has been machined honed and lapped. The barrel has been contoured to reduce weight without sacrificing accuracy. The barrel features 1/2 × 28 threads on the muzzle end for adding a compensator or suppressor and comes standard with a thread protector. Target sights are also available as an option. Volquartsen Custom offers a complete line of rimfire rifles, pistols and accessories. For more information please contact Volquartsen Custom, 24276 240th Street, P.O. Box 397, Carroll, IA. Phone: (712) 792-4238. Fax: (712) 792-2542. Website: www.volquartsen.com.

Remington Introduces Model 700 SPS Tactical in 300 Blackout

Remington is proud to announce the Model 700 SPS (Special Purpose Synthetic) Tactical 300 Blackout rifle. Chambered for the incredibly popular 300 AAC Blackout, this new rifle features the time-proven Model 700 action and is designed to impress from the bench or in the field at a very affordable price. A long-time favorite of both military and police units, the Model 700 offers the legendary accuracy and unfailing performance you’ve come to expect. At the core of the Model 700 SPS Tactical 300 Blackout is the machined solid-steel, cylindrical Model 700 receiver design ensuring uniformity, strength and solid bedding area. Unique to this precision rifle is the 16.5 inch, heavy-contour clean barrel threaded to accept AAC and all 5/8 x 24 threaded flash hiders, muzzle brakes and suppressors. The tactical-style carbon steel, hammer-forged barrel is the perfect balance between handling in tight spots and delivering pinpoint accuracy. With a twist rate of one in seven inches, this rifle is optimized for accuracy. These specialty, bolt-action rifles are shipped with a thread protector installed. The rock-solid barreled action is bedded in a Hogue OverMolded Ghillie Green pillar bedded, synthetic stock with a semi-beavertail fore-end for added stability. The soft-touch, sure-grip stock is extremely comfortable for extended, long range shooting and assures a positive grip in both stressful situations and inclement weather. The dual point pillar bedding guarantees a solid interface between the action and stock to help insure cold bore accuracy and prevent point-of-impact shifts. Add Remington’s X-Mark Pro externally adjustable trigger, designed to “break-like-glass” and set at 3.5 pounds from the factory, and this rifle delivers surgical-like accuracy. Other key features include a drilled and tapped receiver for the addition of optics; distinctive, laser-engraved “300 AAC Blackout 1:7” roll mark; convenient hinged floorplate magazine with 4-round capacity and a non-reflective, black oxide external metal finish; and sling swivel studs. The Model 700 SPS Tactical 300 Blackout is the perfect tactical bolt-action rifle and available at a very affordable price. Suggested retail price is $817.31. You can contact Remington Arms Company, LLC, 870 Remington Drive, P.O. Box 700, Madison, NC 27025. Phone: (800) 243-9700. Website: www.remington.com.

Wheeler Engineering Develops Anti-Cant Indicator

Wheeler Engineering’s Anti-Cant Indicator improves accuracy by insuring proper gun alignment, which is critical for turret adjustment and hold over for bullet drop compensation. Keeping your scope perfectly aligned is critical to long-range accuracy. Canting your scope left or right only a couple of degrees may cause error in point of impact. With modern “Drop-Compensating” scopes, an Anti-Cant Indicator is a necessity. If your gun isn’t aligned correctly, dialing up the turrets or using hold-over marks will just throw off your shot, causing you to miss your target. The Wheeler Engineering Anti-Cant Indicator ensures that your rifle is always held near perfectly vertical, eliminating any chance for “Cant Error” to cause a miss. The Wheeler Engineering Anti-Cant Indicator is available in both 1 inch and 30mm models. This precision piece of equipment is crafted from machined aluminum with an anodized finish. It easily attaches to a scope tube in the same fashion as a ring. The Anti-Cant Indicator is easy to view from all shooting positions, and when not in use it folds in for protection. Retail price of the Anti-Cant Indicator is just $39.99. For more information about the Wheeler Engineering Anti-Cant Indicator or any Battenfield Technologies products, contact Battenfield Technologies, Inc., 5885 W. Van Horn Tavern Road, Columbia, MO 65203. Phone: (573) 445-9200. Fax: (573) 446-6606. Website: www.battenfieldtechnologies.com.

Morphix Technologies Offers New Training Tool

Morphix Technologies, an innovator in the science of detection devices for dangerous chemicals, has created a Training Kit for law enforcement, responder and agency training facilities and schools in response to the increasing need for chemical awareness training. With a rise in illegal drug and chemical production, toxic chemical spills due to industrial or transportation accidents and chemical suicides, more officer and responder training programs include courses that provide critical knowledge on chemical scenarios and how to respond to them. The Chameleon Training Kit, used during training, helps initial responders learn to identify the presence of toxic chemicals through a training Chameleon armband with special inactive cassettes that show the difference between unaffected cassettes and cassettes that read a chemical in the environment. Also included in the kit are blue training cassettes (50 total) and ammonia ampoules that enable the instructor to demonstrate, in a well-ventilated area, how the cassettes change color when exposed to a chemical. Responders learn how to use the Chameleon Training Kit and find that it is as simple as removing one of the grey cassettes from the Chameleon armband and replacing it with one of the blue training cassettes. The Chameleon can then be put over the forearm or attached to a vest with hook and loop. The trainer then demonstrates how a “real world” color change would occur by breaking one of the ammonia ampoules and waving it underneath the training cassette. If the cassette changes from a solid color to two colors, the Chameleon has detected a hazardous level of toxic gas and it’s time to leave the scene. The Training Kit is identical to the original Chameleon system and it shows officers how quickly and easily they can configure their Chameleon and put it on in less than a minute. Please contact them at Morphix Technologies, 2557 Production Road, Virginia Beach, VA 23454. Phone: (757) 431-2260. Fax: (757) 216-6209. They can be found on the web at www.morphtec.com.

Remington Upgrades M-24 Rifle with Leupold ER/T Scope

Remington’s latest upgrade of its Sniper Weapon System for the U.S. Army, the M-24E1, includes a new Leupold Mark 4 6.5-20x50mm Extended Range/Tactical (ER/T) M5 Locking Adjustment riflescope. Specially designed and built with the military sniper in mind, the scope has an auto-locking elevation adjustment. This feature ensures rock-solid reticle adjustment is maintained during rough going and stressful conditions on the battlefield. Other key features of the new ER/T include M5 windage and elevation adjustment dials with audible, tactile 1/10 (0.1) milliradian clicks to match the range-estimating, mil-based Horus reticle options. An elevation zero-stop helps prevent under-rotation in high-stress situations. With the battle-proven Horus H27 or H58 reticle in the front focal plane, the scope offers the versatility of a variable magnification optic and the ability to accurately range at all magnification settings (the reticle magnifies with the image). Leupold’s Xtended Twilight Lens System delivers an exceptionally clear, bright sight picture for outstanding target discrimination at all powers and in a wide range of lighting and environmental conditions. A lockable fast-focus eyepiece makes reticle focus simple to achieve and maintain. Other key features include side focus parallax adjustment for fast, easy parallax focusing from 75 yards to infinity, from any shooting position. The Mark 4 6.5-20x50mm ER/T M5 Locking Adjustment riflescope is waterproof, fog proof and shock proof. For more information contact either Remington Defense at www.remingtondefense.com or Leupold & Stevens at www.leupold.com.

BarrelXchange Introduces 76-Round Drum for the AK-74

For the first time ever there is now a high capacity drum magazine for the 5.45×39 AK-74. The drum holds 76 rounds of the inexpensive 5.45×39 Combloc ammunition. Drums are open back loading design (Chinese clone) and can be loaded and stored indefinitely. Wind them up when you need to. These professionally converted Romanian AK-47 drums go through over 20 modifications each and are test cycled 2-3 times before packaging. Each drum comes with loading instructions and a money back guarantee. Some may require minor fitting on catch pad. Drums will fit in any AK-74 variant semi or full auto. Can also be fitted to MGI AR-15 lowers with AK-74 or AK-47 magwells and a 5.45 upper. The drums are $295 each plus $10 flat rate shipping with sales in the U.S. only. All state and local laws apply. For more information or to place an order you can contact Troy Edhlund at BarrelXchange, Dept. SAR, P.O. Box 821, Arlington, Heights, IL 60006. Phone: (847) 609-4811. The website is www.barrelxchange.com.

New HK Super Long Low Profile Scope Mount from MFI

MFI has just introduced a new 14 inch long optics rail mount for the HK 91/G-3 series of weapons. The new mount was developed as a direct response to requests by the U.S. Military for a longer scope mount that will fit uniformly all HK 91/G-3 variants including the HK 21 (some modification may be required). In fact these new mounts are in the supply chains for all theaters of combat operations including Iraq and Afghanistan as well as law enforcement, SWAT teams and private military contractors throughout the world. This sleek design allows extended length for any of the HK guns in 7.62×51/.308 guns. There is plenty of room for a full size sniper scope and a PVS-22, which is slightly longer than the new PVS-24. Used in conjunction with MFI’s 30mm Tall Sniper rings or their 30mm Cantilever Scope Ring the new mount is a perfect match for the PVS-22 Night Vision height, which is also standard Mil-Spec height for all night vision optics that are to be used with and in front of regular daylight rifle scopes. Unlike competitors’ mounts, the new MFI mount takes less than 5 minutes to mount on the weapon. HK ejection port buffers or any device that rolls over the top of the gun’s receiver in the same location where the mount fits cannot be used along with the new mounts. The MFI Low Profile mount lies on the top of the receiver with near zero clearance. The mounts are made from 6061 T-6 aircraft grade aluminum with hardened steel legs and hooks. They are hard anodized flat black, weigh only 7 ounces and are 100% Picatinny/Mil-Spec 1913 correct. These low profile mounts are made so that they do not interfere with the iron sights when the scope is removed. The mounts are the real deal and made for live weapons. MFI now also has extended low profile mounts for the HK 33, HK 53 and the HK MP-5. For more information please contact them at MFI LLC, Dept. SAR, 2215 Via Dulcea, Fallbrook, CA 92028. Phone: (760) 728-7079. Their website is www.mfiap.com.

Arsenal, Inc. Introduces new 5 and 10-Round Magazines for AK Rifles

Introducing one of Arsenal, Inc.’s latest accomplishments, the 5 and 10-round 100% U.S, made magazines for 7.62×39 AK rifles. For the first time ever, there is a 100% U.S. made magazine with a steel lug insert. The solid steel lug allows for a precision fit and longevity for the magazine. Your magazine will not wear over time due to rubbing against the mag catch. The new double-stack magazine is perfect for all shooting enthusiasts who like to bench shoot or shoot from prone position. They are also great for those of you that live in a state that only allows lower capacity magazines. These magazines are made using the original Kalashnikov design. They are not reverse engineered and are made to the original specs. These are by far the highest quality, low profile magazines on the market today and pass the Russian Mil-Spec drop tests. The smooth body is made from the same high quality polymer and texture as the U.S. made furniture found on all Arsenal, Inc. firearms. The magazine will count as three (3) 922r compliance parts and is available in plum and black colors. The magazines come with a limited lifetime warranty. For more information or to place an order you can contact them at Arsenal, Inc., Dept. SAR, 3395 S. Jones Blvd. #331, Las Vegas, NV 89146. Phone: (702) 643-2703. Fax: (702) 307-2341. Website: www.arsenalinc.com.

Rudy Project Introduces New Tactical Eyewear

Rudy Project, long known for their sport line of eyewear, now has a line of tactical eyewear that is second to none. In case you haven’t heard of them they make the most technically cool eyewear there is. They have been used by athletes since 1985 and now they are making a line of tactical glasses and goggles that offer cutting edge eye protection as well as the most optically clear glasses that there are. They are also very good looking. The lenses used in the glasses are called Impacts and are made from the same material as Apache helicopter windshields. The material used in the lenses is stronger than any other lens material. It is stronger and 10% lighter than polycarbonate. The lenses are guaranteed unbreakable for life. They also have excellent resistance to abrasion and scratching. In fact, Rudy Project lenses are so scratch resistant that they are covered by a Replacement Lens Guarantee. They are so high tech that they have a Hydrophobic treatment that facilitates runoff of water droplets from the surface of the lens, maintaining vision free of typical distortion caused by wearing the glasses in a wet environment. The lens can be had in just about any color including several colors of Photochromic. The Photochromic lenses automatically darken within just a few seconds. Rudy Project glasses have very high tech frames as well. Some are made from plastic mixed with advanced carbon, others from advanced metal composites but all feature temple arms and nose pieces that are 360° adjustable, so you can literally shape the frame to your face. The frames fit comfortably under hearing protection even for extended periods. You can adjust the nosepiece so that the glasses fit either closer or farther from your face to control fogging. Rudy Project Tactical Eyewear features instantly changeable lens so the user can change colors to fit the requirement. All Rudy Project glasses can also be fitted with prescription lens. For more information on this outstanding eyewear you can contact them at Rudy Project North America, Dept. SAR, 3300 E. 17th Ave., Denver, CO 80206. Phone: (949) 272-2457. Fax: (949) 260-7851. Website: www.rudyprojectusa.com.

Pelican Deploys the 9440 Remote Area Lighting System

Pelican Products has announced that their Advanced Area Lighting Group has rolled out the 9440 Remote Area Lighting System (RALS), as an incredibly bright and extremely portable area light. The 9440 RALS features 10 next-generation LEDs and a beam spread of 120 degrees that effectively lights a large area. Additionally, it offers two brightness settings that shine 2,400 lumens for 3 hours in high-setting and 1,200 for 6 hours in low. The light is powered by the latest, maintenance-free, nickel metal hydride rechargeable battery. As a result, it runs silent and has no power cord which eliminates trip-hazards and emits no toxic fumes like bulky inefficient gasoline-powered lights. Setting up in seconds, and weighing in at a mere 16 lbs., the 9440 RALS is built with a streamlined, self-deploying tripod for easy site placement and a nylon shoulder strap for simple transport. The 9440 RALS also features a telescoping light tower which extends more than 7 feet and a light array that articulates 90 degrees. The 9440 RALS is available in either yellow or black and has an MSRP of $999.95. For more information you can contact Pelican Products Inc, Dept. SAR, 23215 Early Avenue, Torrance, CA 90505. On the web at www.pelican.com

Ever since the change over from the 7.62x51mm to the current 5.56x45mm there has been controversy between two fundamental schools of thought on what a military cartridge should be. The United States military can be summed up in one word: tradition. In the 1960s, that tradition clouded the vision that a new dawn of small arms development in both concept, mechanics and ammunition had come. Still entrenched in the “one shot, one kill” mentality, our soldiers were sent into combat in Vietnam with the M14 which many considered to be an inferior weapon to the AK47 assault rifle that the enemy used. The enemy were able to lay controlled large volume of automatic fire on positions which, in a meeting engagement, will win you a fight. Our soldiers were equipped with a heavy recoil rifle that was impossible to control on fully-automatic. The accuracy was of no use because the enemy could not be seen.

With much trepidation, the military adopted the AR-15 rifle destined to become the M16/M16A1. A new age of small caliber high velocity cartridges gave way to providing an individual soldier with firepower he had never had before. The 5.56x45mm cartridge utilizing a .224 diameter 55-grain full metal jacketed bullet proved to be a great asset to the American fighting man with the ability to have a lightweight rifle that was completely controllable on fully-automatic fire and the soldier could carry more than twice the combat load with an M16 than he could with the heavy M14 rifle.

The Third Generation M16A2 and M855 Ball

With the product improvements of the M16A2 the weapon system was enhanced. Due to the heavier 62-grain bullet, 1 turn in 7 inch rifling twist and new fully adjustable rear sight, both penetration and long range accuracy were enhanced. However, the culprit of the future problems with ammunition terminal performance would come from the ammunition, the M855 Ball.

The M855 Ball is a three piece bullet consisting of a copper jacket, lead plug and a steel penetrator core in the tip. This bullet was designed for a machine gun, not a rifle. With the onset of the Global War on Terrorism, terminal deficiencies were found using M855 Ball, particularly in M4 carbines, when striking thin, malnourished, Taliban and Iraqi soldiers. There was a serious inconsistency in at what point the bullet would yaw and splinter. Some lots of ammunition would penetrate only slightly within inches and yaw and splinter. Others would go straight through and never yaw nor splinter. This caused serous knockdown problems particularly with the decreased velocity of 14.5 inch carbine barrel.

A solution put forth by the United States Special Operations Command (SOCOM) was the creation of a new and improved 5.56x45mm cartridge that would increase long range accuracy and terminal performance with consistency. Accuracy is seriously degraded in the M16A2/A4/M4 due to the inherent characteristics of the M855 bullet. The penetrator core degrades accuracy and if not manufactured properly, the center of gravity will be off causing the bullet to become a “flyer.” Additionally, in the area of terminal performance, there was no consistency from lot to lot on what exactly it would do upon hitting a human target.

The answer was the Mk 262 MOD 1 cartridge that SOCOM adopted. This is a Sierra 77-grain open tip match bullet loaded by Black Hills. This is undoubtedly the most effective 5.56x45mm military cartridge in the world manufactured to match grade specifications with combat reliability. The long range accuracy was drastically increased and its terminal performance enhanced. This new projectile works well regardless of the type of target and performs considerably better on human targets in all known distances and conditions. This round is used almost exclusively by SOCOM operators in their M4A1 carbines and Mk12 rifles. This solution satisfied most of the SOCOM operators: except for one.

The 6.8x43mm REM SPC

The 5th Special Forces, particularly MSG Steve Holland, felt that there was still room for improvement. The concept was not original. The U.S. military experimented with the possibility of the 6mm caliber projectile being the ideal compromise of accuracy, range and terminal performance. In the late 1970s the concept was abandoned in favor of the 5.56x45mm battle rifle.

With the assistance of the U.S. Army Marksmanship Unit, Holland came up with a concept for a 6mm cartridge that could be fired in the M4 platform. The starting point was the .30 Remington cartridge which is merely a rimless .30-30 Win. round. It was trimmed and resized to accept a 6.8mm projectile. This concept, along with the hand-loaded experimental ammunition and CAD drawings went to Remington Arms. Remington wanted to aid in the Global War on Terrorism so they took on the task of developing the ammunition.

The 6.8mm REM SPC cartridge has been mostly a myth for the last few years due to the fact it has been developed quietly and kept proprietary. No ammunition has been made as of this writing in large quantities due to the fact the ammunition is being perfected before it will be shipped. Remington has reported three small runs of ammunition including ball and match grade ammunition. Hornady has also produced some loads in this new caliber.

The Firearms

Prototype rifles were manufactured by Precision Reflex, Inc. (PRI). Dave Dunlap assembled upper receivers with free floating handguards or A.R.M.S., Inc. SIR systems and the OPSINC silencer and muzzle break. Dunlap also was charged with designing the magazine which is different from the standard 5.56x45mm magazine. Currently, PRI has been the only producer of 6.8x43mm Rem SPC magazines. PRI also produces complete upper receivers chambered in the 6.8x43mm Rem SPC cartridge.

The Barrett M648

At the 2004 SHOT Show, Ronnie Barrett unveiled a new product line: his M648. This company, dedicated to .50 BMG caliber specialized weapons, introduced the first production 6.8x43mm Rem SPC firearm and has taken the lead on this project. While the cartridge is still technically under development (to be more correct would be to say “tweaked”), Barrett has teamed up with Peter Forras to work with Remington to optimize the weapon and cartridge. Forras has spent much time down at Remington working with them to perfect the 6.8x43mm cartridge.

The rifle has been based on the standard M16-platform. Barrett offers the rifle in both commercial and law enforcement/military configurations. The “bells and whistles” are the same for both versions, the only real difference is the use of selective fire, flash suppressors, bayonet lugs and telescopic stock on the law enforcement/military models.

The weapon as offered uses a mid-length gas system developed by Mark Westrom of ArmaLite, Inc. This mid length gas system changes the location of the gas port by placing it further forward than the carbine and slightly behind the rifle. This gives two major advantages: reliability and durability. By putting more distance between the bolt carrier and gas port, lower port pressures are created resulting in the bolt assembly’s velocity being slower. This increases reliability in extraction as well as extending the life of the bolt and some of the trigger components.

The barrel is manufactured by Fred Fedderson. This 1 turn in 10 inch twist barrel is chrome plated and is currently available in 16 inch length only. Barrett has plans on offering 12 and 20 inch barrels in the near future. The commercial version has a muzzle check similar to the one used by ArmaLite, Inc. The law enforcement/military versions use the standard M16-style muzzle break/compensator

The M648 gas block utilizes a folding front sight assembly. This assembly was designed by Barrett. On the law enforcement/military version, there is a threaded collet on the edge of the gas bock to install the silencer.

The Mid-Length SIR System

The A.R.M.S. Inc. SIR (Selective Integrated Rail) system developed by Richard Swan is the solution for many problems associated with military use of this type of weapon system. The SIR system is a free-floating handguard assembly that attaches to the carrying handle by a sleeve that goes on top of the rail (thus protecting it) as well as directly to the barrel nut. This give an extended top rail that runs the entire length of the upper receiver to the front sight assembly. There are four Mil-Std 1913 rails that enable optics, laser, flashlights and whatever other accessories that may be needed for the rifle with no effect on the barrel and its performance.

Free floating a military weapon has many benefits. First would be accuracy. With nothing impeding on the harmonics of the barrel, better uniform accuracy is achieved. Additionally, the barrel remains cooler as there is significantly better air circulation enabling the weapon to fire longer on full automatic fire. Another benefit, particularly with a hot barrel, pulling down on a vertical fore grip will not cause the barrel to bend or droop. The SIR system may also have a M203 grenade launcher attached to it. All the current models of the M648 feature the A.R.M.S. Inc. SIR system as well as the ARMS #40 L emergency flip-up backup sight.

The Bolt

The bolt carrier is standard M16/AR-15. The difference lies in the bolt itself. The bolt was designed by Chris Barrett and is manufactured by Lewis Machine & Tool (LMT). The bolt uses the trademark dual extractor spring “lobster tail” extractor manufactured by LMT as it is more durable and reliable. The bolt has other similarities to the LMT Enhanced bolt but Barrett made some changes in materials and specifications specifically for the M648. The bolt has a nickel plating on it.

Configurations

The M648 comes as a full weapon with fixed rifle stock as well as selective fire carbine lower receiver with the telescopic buttstock. The system is also sold as an upgrade or a conversion kit which will include the entire upper receiver assembly and magazine. The conversions can be obtained with either selective fire bolt carriers or semiautomatic only. It should be noted that when putting a conversion on a standard selective fire carbine lower receiver, the “H” buffer should be used. This is the buffer with two steel weights and one tungsten. If the standard three steel weight buffer is used the carbine may experience bolt carrier bounce resulting in light strikes on full automatic. This is not an issue with the full length rifle selective fire lower receiver. Semiautomatic guns can use either due to the bolt group will have sufficient time to lock before the next shot is fired. There has been some discussion about Barrett eventually coming out with a piston driven mechanism for this weapon system.

Shooting Impressions

The rifle received for testing was a law enforcement/military upper receiver with a standard semiautomatic only lower receiver. The author’s own Colt M4 full automatic carbine lower was used for full automatic testing. The semi-automatic only lower receiver was equipped with an LMT two-stage match grade trigger. The optics used were the M68 Aim Point Comp II, EOTech holographic sight as well as the standard backup sights. Approximately 700 rounds were fired in total in both semiautomatic for accuracy as well as fully automatic for functionality. The magazine used was a PRI made 28-round steel magazine. The ammunition was manufactured by Remington.

Fully-automatic tests were conducted in close quarter battle conditions. Targets ranged from 5 to 25 meters. The cyclic rate was about the same as the standard M4 carbine and recoil was really not that much more. There was no problem controlling the weapon. The EOTech sight made shooting easier allowing both eyes to remain open increasing speed and accuracy. By adjusting the brightness of the sight, it was useful for both close tactical work as well as short range sniping.

Conclusions

The 6.8mm Rem SPC is without a doubt an improvement over the existing 5.56x45mm for military use. But the question is, how much better? The cartridge unfortunately has a very steep uphill battle ahead of it once the military community gets a hold of it. The weapon itself is not an issue. The M16-based design is well proven. But in order for SOCOM in particular to adopt such a cartridge for use will be a gigantic undertaking. First and foremost it has to be more than better, it will have to be drastically better and offer a large advantage. Second, and perhaps the most critical, will be logistics. The cartridge will be at best used by SOCOM operators and them alone. From a logistical standpoint, adding a new cartridge into inventory, in particular one nobody else in the service uses, can cause serious problems. Once SOCOM operators are deployed they become part of the unit they are assigned and along with that goes their supply. Having non-compatible ammunition can put the operators at risk given they do not have re-supply specific to them.

The Barrett M648 and 6.8x43mm Rem SPC ammunition performed flawlessly and accurately. Barrett has not been too quick to go into production due to the fact they have waited until the development of the rifle and ammunition was completed insuring their customers get a final production weapon and not a semi-prototype. As of this writing, after more than three years of advertising and manufacturing of barrels to fire this new cartridge, the ammunition has yet to be completed and put into full production. This weapon and cartridge will undoubtedly find a following in law enforcement and commercial shooters and competitors. As far as the military use of this weapons system, only time will tell.

U.S. Rifle, Caliber .30 Model of 1903

The U.S. M1903 Rifle was designed and adopted to replace the Krag-Jorgensen rifle and its .30-40 cartridge. Adopted on June 19, 1903, the M1903 Rifle was chambered for the Model of 1903, .30 Government Cartridge (.30-03), which had a 220-grain round-nose projectile. The Model of 1903 Rifle was only in service a short period of time before some changes were made. One of the most prominent upgrades was the rechambering for the improved Model of 1906 cartridge, which had a lighter, spitzer-type projectile and an improved powder. A newly designed M1905 rear sight was also added. The rifles were manufactured by Springfield Armory and Rock Island Arsenal from 1903 until 1914. Production was quickly resumed during 1917 with the U.S. entry into World War I.

The M1903 Rifle in .30-06 caliber remained the standard service weapon of the U.S. until the adoption of the M1 Rifle in 1936. During World War II, production of the M1 Garand was not able to keep up with the wartime demand. Thus, Remington Arms was awarded a contract to resume manufacture of the M1903 Rifle. During production, there were many new features implemented into the original design of the ’03 rifle to speed up production. These rifles were designated as the M1903 (Modified). Subsequently, more improvements were made resulting in the M1903-A3 model, which was adopted on May 21, 1942. The 03-A3 had many stamped parts, a new receiver mounted aperture rear sight and a longer hand guard. The L.C. Smith & Corona Company was awarded a contract in February of 1942 to supplement production. The M1903 and its variants remained in service until declared obsolete on July 24, 1947.

U.S. Maxim Automatic Machine Gun, Caliber .30, Model of 1904

The U.S. Maxim Model of 1904 was the first rifle caliber heavy machine gun approved for use as the standard service type by the U.S. Army in 1904. The Army was interested in the Maxim as early as 1887 and procured examples of the “World Standard” Maxim Model 1889 and Model 1900 for evaluation. After sporadic testing, the Chief of Ordnance finally gave approval for adoption in 1904. The first order for 50 guns and tripods were manufactured by Vickers, Sons & Maxim (VSM) in England in the U.S. caliber .30-03.

The Ordnance Department wanted the gun to be made in the United States and enlisted Colt to manufacture the gun. Problems arose and it was several years before Colt could begin production. In the meantime, another forty guns were ordered from VSM. Colt finally began production in 1908. By 1908, the service cartridge had changed from the .30-03 to the .30-06. The ninety guns produced by VSM were all converted to the new service cartridge while all the Colt guns were manufactured in .30-06. Colt produced 197 guns, and with VSM’s 90 guns, total production of the Model of 1904 was 287 guns. Colt never produced any tripods. All the tripods were made by VSM and wheeled carriage mounts were produced by Rock Island Arsenal.

The Model of 1904 saw a brief service life, quickly being declared obsolete by 1915, yet was widely used and saw service in such distant outposts as the Philippines, Hawaii, Mexico, Central and South America. The gun never saw active combat service, particularly in World War I, being relegated to training purposes.

U.S. Automatic Machine Rifle, Caliber .30, Model of 1909

The Automatic Machine Rifle Model of 1909 is commonly referred to in the U.S. as the “Benet-Mercie.” Laurence Benet was an American engineer who worked for the Hotchkiss Company in Paris, France. He, along with another Hotchkiss engineer named Henri Mercie, collaborated to develop an air cooled, gas operated, lightweight machine gun based on the Hotchkiss Model 1900 heavy machine gun design. The Model 1909 differed from heavy machine guns in that it weighed just 30 pounds and was fitted with a wooden stock with elevation gear and a bipod. It was mechanically modified as to how the breech closed and the feedway and feed mechanism were changed. The gun also had a barrel changing ability, unique at that time. The number of parts to the gun were reduced to just twenty five.

The French adopted the French made Hotchkiss gun in 8mm Lebel and the British adopted it in .303. in 1909 and was known on the Continent as the “Hotchkiss Portative.” That same year, the U.S. Army, after lengthy trials, adopted it as service issue as the Automatic Machine Rifle Model of 1909 and ordered 29 guns from Hotchkiss. The Ordnance Department wanted the gun to be made in the U.S. The rights were secured and Colt and the Springfield Armory were contracted to produce the American version in .30-06. Over the next several years, both manufacturers combined produced approximately 670 guns. The Model of 1909 was issued for service with the Model of 1908 Warner & Swasey telescopic musket sight, originally used for sharpshooter use with the Model 1903 Springfield rifle.

The Model of 1909 was issued to U.S. infantry and cavalry troops from 1909 to 1918 and saw limited tactical use in the landing at Vera Cruz in 1913, all along the Mexican border in 1916 and was used in the defense of Columbus, New Mexico against the sneak attack by Poncho Villa in 1916. Though the British and French “Hotchkiss Portative” version was widely used in World War I, the U.S. “Benet-Mercie” was relegated to training use. It was declared obsolete in 1918 and ultimately replaced by the far superior M1918 Browning Automatic Rifle.

Model 1914 Colt Automatic Gun

Invented and designed by John Browning, the Colt Model 1895 Automatic gun was the world’s first practical gas-actuated machine gun. Using a gas-impingement system that operated against a lever that traveled downward and backward in a 170-degree arc underneath the gun, it affectionately became known as “The Potato Digger.” Colt manufactured the gun and was extremely successful in selling the gun world wide in a variety of calibers. The U.S. Navy purchased fifty guns in 1897 in 6mm Lee and another 150 guns in 1898. These guns were used as secondary armament on ships and with naval landing parties and with the U.S. Marines. The gun was also used with some degree of success in the Philippines, the Boxer Rebellion, Mexican border war and the Spanish-American War.

The U.S. Army ordered 100 guns for testing and training in .30-40 Krag. Upon the recommendation of a joint Army-Navy board of 1898 for standardizing arms and ammunition, the Navy rechambered their 6mm Lee to .30-40 Krag, and then they all were changed to .30-03 and ultimately to .30-06. Though the Army, Navy and Marines all used the Colt Model 1895; only the Navy officially adopted the weapon. The Army just continued to buy it commercially as they deemed necessary eventually buying 2,800 guns during World War I. The “Model” designation was a name used by Colt and did not represent acceptance as issue by the Army.

In 1914, Colt modified the Model of 1895 by replacing the heavy, thick permanent barrel with a finned barrel that was easily changeable and became the Model of 1914. It was this version and its variants that ultimately saw use in World War I by a number of Allied nations though relegated as secondary armament and training by the U.S. The gun was used with three types of tripods, basically differing only in height.

U.S. Vickers Machine Gun, Caliber .30, Model of 1915

The U.S. began to realize how vastly under-armed in automatic weapons it was and started a new series of tests in 1913 and field trials in 1914. The new, improved version of the Maxim gun, now called the Vickers, was the clear winner. The new British Vickers was redesigned internally to maximize space within the receiver box by inverting the toggle joint and lock, and the overall weight of the gun was substantially reduced; all without sacrificing reliability. In 1915, the Board of Ordnance unanimously approved the type for the Army as the Model of 1915 chambered for the .30-06 cartridge. They immediately placed an order for 125 guns to be made by Colt and in 1916 placed an additional order for 4,000 even though the first order had not yet even been made. When the U.S. entered World War I in April, 1917, not a single Colt Vickers M1915 had been delivered due to production problems at Colt.

Colt made Vickers guns finally became available in late 1917. By mid 1918, Colt Vickers started to be shipped overseas. The first twelve divisions arriving in France were issued the French Hotchkiss Model of 1914. The next ten divisions that sailed for France in May and June of 1918 were equipped with the Colt Vickers. By August, 1918, thirteen divisions were using the Colt Vickers. In all, 12,125 Vickers Model of 1915 ground guns were produced by Colt.

At the end of World War I, the remaining inventory of Colt Vickers were put into storage and held in reserve. They were ultimately sent to Great Britain under Lend-Lease to help guard against German invasion during World War II, especially after the huge losses of equipment at Dunkirk, while British production fought to rearm the British Army. After World War II, the U.S. did not want the guns returned and the British destroyed the remaining inventory.

U.S. Browning Machine Gun, Caliber .30, Model of 1917

John Browning continued to experiment with different machine gun designs after the introduction of his first machine gun, the Model of 1895 Automatic Gun. He developed a short-recoil, water-cooled gun in 1900 and patented it in 1901. There was no government interest in this prototype and he ceased work on it until 1910 when he made further modifications and improvements to it. Again, there was no governmental interest in the gun.

As the U.S. was being drawn into World War I, the Ordnance Board urgently requested designs for new machine guns. Browning took his heavy water-cooled machine gun along with his new Browning Automatic Rifle to be tested in February, 1917. Both guns tested exceptionally well and the BAR was ordered immediately. As war broke out, another official test occurred in May, 1917. The genius of John Browning shone through with the simplicity of design, reliability and ease of maintenance. Browning’s heavy machine gun was adopted as the Model of 1917 chambered for the .30-06 service cartridge and ordered into production with contracts being awarded to New England Westinghouse, Remington and Colt.

30,089 M1917 Brownings were sent to France before the war ended with 1,168 guns actually being used in the front lines. The first instance of combat usage was in September, 1918 in the battle of the Meuse-Argonne, where, in wet and muddy conditions, the new Browning guns performed exceptionally well with one company firing 10,000 rounds per gun.

The Browning M1917 was to replace the variety of machine guns in American use (British Mk I Vickers, U.S. Vickers Model of 1915 and French Hotchkiss Model of 1914) but the war ended two months later so the Browning actually saw limited use. Yet, Browning’s design was so brilliant that the M1917 and its subsequent variants soldiered on in the U.S. inventory for another fifty years.

U.S. Lewis Machine Gun, Caliber .30, Model of 1917

Colonel Isaac Lewis began development of the Lewis gun in 1910 based upon a previous design by Samuel McClean. Lewis presented his gun for formal testing in 1912 to the Ordnance Board, which included a “stunt” by firing the gun from an airplane – the first time a machine gun had ever been fired from an aircraft. The Ordnance Board took a dim view of the “stunt” and during the rest of the trials took particular efforts to find fault with the gun and rejected it claiming it was no better than the already approved Model of 1909 Benet-Mercie.

Lewis then went to Europe where his gun was warmly received and went into production in 1913 at Armes Automatiques Lewis in Liege, Belgium and at the Birmingham Small Arms (BSA) Company in Birmingham, England. Belgium was soon overrun by Germany in 1914 and production continued at BSA who eventually produced 145, 397 Lewis guns during World War I in the British .303 caliber. The gun was widely used to great effect throughout the war.

Savage Arms Company of Utica, New York began producing Lewis guns for a Canadian contract in .303 and the U.S. Army procured 350 guns (in .303) for use in 1916 along the Mexican border. Nevertheless, the U.S. Army still harbored a grudge against Lewis and his gun that dated back to 1912. The U.S. Navy, however, held no such animosity and purchased 6,000 Lewis guns from Savage for the U.S. Marines chambered in .30-06 and it was designated as the Model of 1917. Upon arriving in France, the 5th Regiment of the Marines attached to the 2nd Division, who had been issued and trained with the Model of 1917, had their Lewis guns taken away and were issued the French Hotchkiss M1914 and Chauchat M1915 machine guns. The American .30-06 Lewis guns were turned over to the Aviation Services. The Army in due course purchased 2,500 M1917 Lewis guns but they relegated them to U.S. training. U.S. Model of 1917 Lewis guns saw little or no infantry combat during the war. After the war, the Army discarded the Lewis gun though the Navy and Marine Corps kept it in their inventory until the 1930s.

Marlin Machine Gun Model of 1917/18

As World War I heated up, orders for the Colt M1914 increased as well. Colt entered into an agreement with Marlin Arms Company on manufacturing the M1914. Marlin’s designer, Carl Swebilius, worked out an improvement to the operating system that changed Browning’s original “Gas Hammer” style lever action to a straight piston arrangement. The Marlin guns, with the exception of a small run of M1917 trainers, were no longer “Diggers,” the piston in tube arrangement ran along the bottom of the barrel and applied the energy to the bolt system.

This change made Browning’s system easier to adapt into aircraft and vehicles; thus, the M1917 and M1918 Marlin Aircraft Machine Gun designations, and the M1917 Marlin Tank Machine Gun designation. Unfortunately, changing to a straight line piston changed the impulse time and energy, and the early guns had trouble in extraction tearing case rims. Adjustments were made to the design, but not before negative publicity occurred. Marlin had taken the position that the ammunition the Army had did not have strong enough cases and the Army said that the Marlin guns had to work with ammunition that was fielded. In the end, the Marlin M1917 type guns were relegated to aircraft use where there was more control on ammunition quality. Some of the Marlin guns had aluminum radiators on the barrels similar to the Lewis M1917, but most had a bare barrel.

The Marlin M1917 and M1918 machine guns did see combat in U.S. use. During World War II, may were shipped to England for their naval defense.

There were an additional 2,816 of the Marlin Model 1917 that are virtually identical to the Model of 1914 “Potato Digger” made by Colt. These were for training in the U.S. Army, and the main difference was in the location of the belt feed opening.

U.S. Rifle Caliber .30, Model of 1917

The U.S M1917 rifle was originally produced as the Pattern 14, .303 caliber “Enfield” for the British. Prior to the U.S. entry into World War I, the British negotiated several contracts with the U.S. firms of Remington, Winchester and Eddystone (a Remington subsidiary), to produce the P14. Collectively, 1.2 million of the Pattern 14 rifles were made from 1916 to 1917.

Upon the United States’ entry into World War I, the U.S. Army faced a service rifle shortage. With the British contracts completed, instead of having the companies retool for the M1903 rifle, the War Department decided to make a few design changes and rechamber the P14 to the U.S. M1906 rimless .30-06 round and the new rifle was ready for production. The U.S. M1917 rifle was officially adopted in April 1917. There were over 2.4 million manufactured from 1917 to 1919 at a cost of $26.00 per weapon.

When World War I ended, the M1917 rifles were prudently placed into storage, after having been rebuilt by various U.S. arsenals. When World War II broke out in Europe, the U.S. and her Allies again faced critical shortages of small arms. The M1917 rifles were pulled from storage and issued to rear echelon soldiers and for training. After the war in October, 1945, the U.S. Army declared the M1917 rifle obsolete. While the U.S. M1917 rifle was more utilitarian then glamorous, it did everything it was intended to do.

U.S. Browning Automatic Rifle, Caliber .30, Model of 1918

As the U.S. was being drawn into the First World War, the Ordnance Board met in May, 1917 to consider for adoption designs for light machine guns and automatic rifles. John Browning had been previously working on a gas-operated, magazine fed, true automatic rifle design and submitted it to the board. It was unanimously accepted by the Ordnance Board and requested that production begin immediately at Colt who had secured the rights. However, Colt was already at peak production and requested approval from the Board for delay in production while they built a new facility in Meriden, Connecticut. Due to the immediate need, the request was denied and the lead manufacturer became the Winchester Company.

The initial contract with Winchester called for 25,000 BARs. They were in full production by June, 1918 delivering 4,000 guns and in July were turning out 9,000 BARs. Colt and Marlin-Rockwell also began production shortly after Winchester got into full production.

By July of 1918, the BAR began to arrive in France and the first unit to receive them was the U.S. Army’s 79th Division and they immediately exchanged their woefully inadequate French M1915 Chauchat machine rifles with the new BAR and began training. In the September 1918 battle of the Meuse-Argonne, the BAR was used extensively. World War I only lasted another two months before ending in November, 1918. Thus, while the BAR was the state-of the-art weapon, it saw limited combat service. Nevertheless, the M1918 BAR was such a fine weapon that it remained as the standard U.S. service automatic rifle after the war and production continued after the war. Of the total 102,125 M1918 BARs produced, Winchester made 47,123, Marlin-Rockwell 39,002 and Colt 16,000.

U.S. Chauchat Automatic Rifle, Caliber .30, Model of 1918

The U.S. was ill-equipped when it entered World War I in 1917 and was particularly lacking in automatic weapons. With less than 1,100 automatic weapons in inventory, consisting of four types in two different calibers, these guns were needed in the U.S. for training the new army. When U.S. divisions arrived in France, they had no automatic weapons.

The French, at war since 1914, had an arms industry in full force. Thus, U.S. troops in eighteen divisions were issued the French Model 1914 Hotchkiss heavy machine gun and the Model 1915 Chauchat automatic rifle: both chambered in 8mm Lebel. The French quickly developed the Chauchat to fill the immediate wartime need of France and consisted of fabricated steel tubing of standard sizes and stampings. The only parts requiring extensive machining were the barrel and bolt. The long-recoil operation, cheap materials, unorthodox enclosed design and hurried production produced a gun that had poor reliability and worse accuracy. But, it was all that was available.

To help alleviate a two-cartridge supply nightmare, the U.S. asked the French manufacturer, C.S.R.G., to produce the gun in .30-06. Good idea, bad execution. The gun was simple in its design and conversion was easy: change the barrel, replace the semicircular magazine with a detachable box magazine, change the angle of the bipod and change the graduations on the rear sight. However, the already poor reliability of the gun went from bad to worse.

The more powerful, straight cased, rimless .30-06 cartridge was very difficult to extract. With its violent action, the M1918 Chauchat tore the cartridges instead of extracting them and the more powerful .30-06 caused major stress on all the working parts causing failures. Additionally, the gun heated up very quickly causing the action to freeze until it had cooled. Due to the enclosed design, clearing stoppages and jams was almost impossible. The gun, in a single word, was awful.

The U.S. nevertheless quickly adopted it as the Chauchat Model of 1918 and bought and paid for 25,000; taking delivery of 19,241. There is no record of M1918s being used in combat and were relegated to training use. They were so bad, that immediately after the war, the U.S. ordered them to be destroyed.

Browning Machine Gun, Caliber .30, M1917A1

In the rush to supply American troops in World War I, deficiencies in design and manufacturing methods of the Model of 1917 manifested itself quickly in operational use. Many of the problems stemmed from the lack of, or improper heat treating of, key internal parts that included the bolt, barrel extension, accelerator, firing pin, trigger and extractor. Inaccurate manufacturing tolerances also contributed to leaking water jackets at the muzzle cap. The most severe problem was due to the pounding of the breech lock on the breech lock cam causing cracks in the receiver side and bottom plates.

As early as 1919, steps were taken to remedy these problems; the most obvious being welding or riveting a “U” stirrup under the bottom plate and extending up each side of the receiver to strengthen the receiver box. A program was initiated by Rock Island Arsenal in 1936 to covert all Model of 1917 guns with upgrades. Changes included a large, new-manufactured reinforced bottom plate that extended up the sides of the receiver and riveted in place, a new belt feed lever, an improved top cover latch that also incorporated a hold open feature and a new rear sight graduated in yards for the M1 ball cartridge (original Model of 1917 sights were in meters). This improved version of the Model of 1917 was designated as the M1917A1. (The “Model of” designation for U.S. arms was dropped in 1939 and replaced with the letter “M”.)

During World War II, more changes occurred to the M1917A1 that included an improved bolt, the bronze end cap and trunnion replaced by steel, the steam tube assembly was strengthened and the rear leaf sight graduated for the now standard M2 ball cartridge. While almost all Model of 1917s were ultimately converted to the A1 specifications, production resumed from 1936 to 1945 with 55,859 M1917A1s being produced by Rock Island Arsenal.

The M1917A1 was used extensively in both theaters of operation during World War II and continued service throughout the Korean War and the beginning stages of Vietnam.

U.S. Browning Automatic Rifle, Caliber .30, Model of 1918A2

During the interwar period, many attempts were made to improve on the M1918 BAR. The M1918A1 and the M1922 were made in very small quantity, with the basic addition of a bipod being the most obvious change. In 1938-39, serious work was begun on what became the Browning Automatic Rifle, Model of 1918A2. The initial experiments with the bipod were expanded upon, and the bipod placement was moved to the front of the barrel utilizing a new flash hider to secure it. The bipod allowed full rotation of the barrel, which made up somewhat for the loss of traverse due to the forward location.

A second addition was that of a pistol grip which extends slightly below the trigger. The method of firing was changed from select fire, (semiautomatic and fully automatic) in the Model of 1918, to dual rate of fire in the Model of 1918A2. This rate reducing mechanism was initially based on the Belgian FN-D BAR trigger group but was later adapted to a US design. Magazine guides were also added to the front of the trigger guard. The fore end was shortened and a heat shield was added, all to help the cooling process. There was a hinged buttplate to add support from the operator’s shoulder, and the new buttstock design allowed for a monopod stock rest.

Production of the M1918A2 was initially performed by upgrading M1918 and M1918A1 BARs. M1918A2 new manufacturing was started in January of 1943. The M1918A2 BAR served in the US military forces throughout World War II, Korea, and well into the Vietnam War. M1918A2s are still seen in various inventories around the world, obsolete though they are.

Browning Machine Gun, Caliber .30, M1919A4

The success of John Browning’s designs is evident in the proliferation of Browning machine guns used by U.S. and other forces around the world. The end of World War I and the advent of more mobile military forces led firearms designers to confront new problems of portability, and the use of tanks and aircraft compounded this. Browning’s basic design for the M1917 series had morphed from water-cooled to air-cooled as early as 1918, and the first models of 1919 Browning machine guns were basically for aircraft use.

The most prolific of the air-cooled Browning machine guns in rifle caliber was the M1919A4. This final variant was designed as either a flexible mount unit for tank use, or for mounting on the M2 tripod with traverse & elevation mechanism and pintle. Production began with the adoption of the M1919A4 in 1935. At that time, all M1919A2 and other earlier variants were started onto a rebuild program to have the longer 24 inch heavy barrel as well as other modifications. By 1939 the elongated slots in the barrel jacket were changed to the quickly recognizable pattern of 5/8 inch diameter holes.

The M1919A4 served well into the Vietnam War for U.S. forces and is still in use today in various armies around the world, primarily in South and Central America and Africa, although most have been replaced with more modern weapons. The M1919A4 was fielded in .30-06, but it has been issued to various armies in 8mm Mauser, 7.62×51 NATO, 7.65 Argentine, and others.

Browning Machine Gun, Caliber .30, M1919A6

The Browning M1919A6 was conceived as a stop-gap measure to fill a void between the M1919A4 and the BAR. The BAR, while relatively light and portable, did not have the capability of sustained firepower. The M1919A4, while perfectly adequate, lacked the ability to be quickly set up and employed and still required the use of a tripod for stability.

The Infantry Board in 1942 investigated many light machine guns of the time, including the German MG42. While a number of designs were submitted, wartime shortages, production constraints and immediate need precluded the design and production of a superior weapon versus modifying a current production weapon to fill the need. (A bird in hand is better than two in the bush.) Reminiscent of Germany’s decision in World War I to develop a light machine gun from an already existing production gun (the MG08/15 from the MG08), the Infantry Board decided to make modifications to the Browning M1919A4 machine gun.

Beginning in 1943, the gun was standardized as the M1919A6 and featured a removable shoulder stock, a lighter barrel with a different barrel bushing to accommodate a bipod and was fitted with a carrying handle. The gun weighed 12.5 pounds lighter than the M1919A4 mounted on its M2 tripod, and was easily transportable and set up by one man. Other than these relatively minor modifications, the gun was mechanically identical to the M1919A4.

Production of the M1919A6 was by the Saginaw Steering Gear Division of General Motors, who produced 43,479 M1919A6s. A number of M1919A4s were also converted to the M1919A6 configuration. The gun saw wide service in the last two years of World War II and continued to see service through the Korean War and the early years of Vietnam.

U.S. Rifle, Caliber .30, M1

Development of the M1 rifle began in 1919. Limited funds and the conflicting ideas of many of those involved caused the program to drag on until 1936, when a suitable prototype finally emerged. Original prototype rifles were chambered for a .276 caliber cartridge. However, the weapons were soon changed over to the existing, standard U.S. 30-06 round by order of General Douglas MacArthur. The decision was due in part to the large stockpiles of the ammunition that remained from the First World War. The basic M1 design was continually refined until 1940 when large-scale production finally began.

The gas operated, semiautomatic M1 rifle was the inspiration of John C. Garand, who designed the weapon while employed by the Springfield Armory. During World War II, the M1 rifle was manufactured by Springfield Armory and the Winchester Repeating Arms Company. Approximately 4,040,802 M1 rifles were manufactured from 1937 to 1945. The remarkable M1 design was to have a service life extending long past the conclusion of World War II.

In 1950, the outbreak of hostilities in Korea brought the World War II M1 out of pending retirement. A dwindling supply of rifles dictated that additional M1s would be needed and production resumed. During the Korean Conflict M1 rifles were manufactured by International Harvester, Harrington & Richardson and the Springfield Armory. During the1950s era, approximately 1,427,970 additional M1 rifles were produced, and many more WWII era rifles refurbished. The last M1 rifle was manufactured in 1957.

Browning Machine Gun, Caliber .30, M2

Immediately following World War I, experiments began on making a high speed air-cooled Browning machine gun variant for aircraft use. The original high speed guns were designed by Colt, and these included the M1918, M1918A1, M1919, and MG40. Each model had its problems, leading to the next variant. Part of the problem was that in going to the newer more powerful M2 .30-06 service cartridge, the cyclic rates went up by percentages in the 20% range. At 1,000 rpm, problem occurrences were magnified.

The final variant of the high speed Browning machine gun is commonly referred to as the “Aircraft Gun” or the “M2”. The prefix “AN” simply stands for “Army-Navy.” There were two basic models of the M2: Fixed or Flexible. The M2 Fixed gun was forward firing only, mounted in the wings or cowling, for remote firing by the pilot on an aircraft. The M2 Flexible gun had a spade grip assembly and was mounted so that an air gunner could engage targets within his traverse area.

The M2 guns were designed so that they could be switched out for feeding from either the right or left sides. This also allowed for the use of a twin mount. Twin M2 Browning machine guns firing at 1,200 rpm each made for a very impressive increase in hit probability in air battles.

The M1941 Johnson Rifle

Designed by Melvin M. Johnson, Jr., the M1941 Johnson was unique for a rifle caliber semiautomatic weapon because it was recoil operated rather than the more commonly used gas operating system. This unique feature made the Johnson rifle easy to manufacture and less prone to gas fouling. The weapon also featured a 10 round rotary magazine that could be topped off with additional rounds. The nomenclature M1941 was a commercial designation as there were no Johnson rifles manufactured under U.S. contracts.

The Johnson Automatics Company subcontracted with the Universal Windings Company to manufacture the weapon at their factory complex located in Cranston, Rhode Island. The company would be known as the Cranston Arms Company. Approximately 30,000 Johnson Rifles were manufactured before production ceased in early 1943.

Although the Marine Corps had chosen the M1 Garand, few M1 rifles were available as wartime demand far exceeded the supply. One feature of the Johnson rifle that the Marines liked was it could be easily broken down. This was considered an asset for their newly formed “Paramarine” battalions where the rifles could be easily carried when disassembled. The Marines procured a limited number of the Johnson rifles for issue to the 1st Parachute Battalion in 1942.

Model of 1941 Johnson Light Machine Gun

Invented and designed by Melvin M. Johnson, Jr., it was his intent that the M1941 Johnson LMG replace the BAR. Despite the light machine gun designation, it really was an automatic rifle like the BAR. Notwithstanding the name game, the M1941 LMG had many unique features. Chambered for the M2 .30-06 cartridge, it had a straight line stock which decreased muzzle rise during full automatic fire; necessitating a high front sight. It was light weight at only about 13 pounds and was very accurate in the semiautomatic mode as it fired from a closed bolt, yet in full automatic mode, fired from an open bolt to assist in cooling and preventing cook-offs from a hot barrel. The magazine well was also unique in that the 20-round box magazine could be topped-off by the addition of single rounds through the right side of the receiver or by five round stripper clips. Additionally, the feed lips were a machined part of the receiver rather than being part of the magazine and thus not subject to deformation. The M1941 LMG also employed a quick change barrel.

The M1941 Johnson light machine gun was never officially adopted by the U.S. but was used by selected units of the Marines and Army. Because BARs were in short supply, the U.S. Marines obtained a small quantity of M1941 LMGs primarily intended for use by airborne units and Marine Raiders which saw combat use in the South Pacific. The Army also acquired some M1941 LMGs for issue to the Army’s First Special Service Force, the OSS and there are unconfirmed reports that they were also used by some Army Rangers.

Though some 10,000 M1941 LMGs were produced by Cranston Arms Company, only a relative few (less than 3 percent) were used by the U.S. with the bulk originally ordered by the Dutch for use in the Dutch East Indies. At the fall of the Dutch East Indies to the Japanese, the remaining guns of the contract were embargoed so as not to fall into Japanese hands and is the reason a number of guns were available to the U.S. as needed.

Browning Machine Gun, Caliber .30, M37

The .30 caliber M37 machine gun was a post World War II machine gun variation designed as a secondary weapon for use on combat vehicles and tanks. The M37 differed from the M1919A4 in that it could be fed from either the right or left side by repositioning of a few parts. The top cover also had a new type latch that could be opened from either side. The M37 was generally used as a fixed tank weapon, but was also utilized in the flexible role, primarily by the U.S. Marine Corps. When used in the flexible role, rear sights were added and the weapon was used on the M2 tripod. Among other improvements, the M37 featured a chromed trunnion block, barrel and booster. Many of the parts of the M37 were redesigned and not readily interchangeable with the M1919A4 machine gun. Rock Island Arsenal and Saco-Lowell Shops manufactured the M37 machine gun from 1953 to 1969. The M37C variation was similar to the M37, but used an electric solenoid to fire the weapon, and rather than manually charged, it used a hydraulic system to perform the task. The M37C was used in early helicopter applications, as well as being fitted in the U.S. M48 and M60 tanks.

Model: U.S. Rifle, Caliber .30, Model of 1903
Caliber: .30-06
Operation: Bolt action
Overall length: 43.5 inches
Barrel length: 24 inches, twist right hand 1 turn in 10 inches
Weight: 8.69 pounds
Magazine: Integral, 5 round capacity
Sights: Front: blade.
Rear: M1903 ladder type, M1903-A3 stamped, aperture type .
Production: Pre-WWII approximately 1,704,779. During WWII 1,415,593
Manufacturers:
    World War I: (M1903) Springfield Armory, Rock Island Arsenal.
    World War II: (M1903-A4) Remington Arms, L.C. Smith & Corona

Model: U.S. Automatic Machine Rifle, Caliber .30, Model of 1909
Caliber: .30-06
Operation: Full automatic, gas operated
Cooled: Air
Weight: 30 lbs.
Overall length: 48.5 inches
Barrel length: 25.1 inches
Cyclic rate: 400 rounds per minute
Feed: 30-round metal feed strip
Sights: Front: Protected blade.
Rear: Ladder type graduated to 2,800 yards Warner & Swasey M1908 telescopic sight
Production: 670
Manufacturer: Colt, Springfield Armory

Model: U.S. Vickers Machine Gun, Caliber .30, Model of 1915
Caliber: .30-06
Operation: Full automatic, short recoil with muzzle gas assist
Cooled: Water
Weight: Gun: 32.5 lbs. Tripod: 50 lbs.
Overall length: 43 inches
Barrel length: 28 inches
Cyclic rate: 500 rounds per minute
Feed: 250-round cloth belt
Sights: Front: Protected blade.
Rear: Ladder type graduated to 2,600 yards
Production: 12,125
Manufacturer: Colt

Model: U.S. Maxim Automatic Machine Gun, Caliber .30, M1904
Caliber: .30-06
Operation: Full automatic, short recoil with muzzle gas assist
Cooled: Water
Weight: Gun: 57.5 lbs. Tripod: 80 lbs.
Overall length: 44 inches
Barrel length: 28.5 inches
Cyclic rate: 500 rounds per minute
Feed: 250-round fabric belt
Sights: Front: Protected blade.
Rear: Ladder type graduated to 2,600 yards
Production: 287
Manufacturer: Vickers, Sons & Maxim, Colt

Model: M1914 Colt Automatic Gun
Caliber: .30-06
Operation: Full automatic, gas impingement system
Cooled: Air
Weight: Gun: 35 lbs. Tripod: 56 lbs.
Overall length: 41 inches
Barrel length: 28 inches
Cyclic rate: 400 rounds per minute
Feed: 250-round cloth belt
Sights: Front: Protected blade.
Rear: Ladder type graduated to 2,600 yards
Production: 25,000
Manufacturer: Colt, Marlin-Rockwell

Model: U.S. Lewis Machine Gun, Caliber .30, Model of 1917
Caliber: .30-06
Operation: Full automatic, gas operated
Cooled: Air
Weight: Gun: 25.5 lbs. Bipod: 3 lbs.
Overall length: 51 inches
Barrel length: 26.5 inches
Cyclic rate: 550 rounds per minute
Feed: 47-round rotating pan magazine
Sights: Front: Blade protected by ears.
Rear: Ladder type graduated to 2,100 yards
Production: 8,500
Manufacturer: Savage Arms Co.

Model: U.S. Browning Machine Gun, Caliber .30, Model of 1917
Caliber: .30-06
Operation: Full automatic, short recoil
Cooled: Water
Weight: Gun: 30 lbs. Tripod: 53 lbs.
Overall length: 38.5 inches
Barrel length: 24 inches
Cyclic rate: 500 rounds per minute
Feed: 250-round fabric belt
Sights: Front: Protected blade
Rear: Peep, adjustable leaf graduated to 2,800 meters
Production: Approximately 72,000. Wartime 42,750
Manufacturer: New England Westinghouse, Remington, Colt.

Model: U.S. Rifle Caliber .30, Model of 1917
Caliber: .30-06
Operation: Bolt-action
Overall length: 46.25 inches
Barrel length: 26 inches, twist: left hand 1 turn in 10-inches
Weight: 9.187 pounds
Magazine: 5 rounds integral box type
Sights: Front: protected blade
Rear: protected aperture style adjustable ladder sight
Production: Approximately 2.4 million
Manufacturers: Remington, Winchester, Eddystone

Model: U.S. Chauchat Automatic Rifle, Caliber .30, Model of 1918
Caliber: .30-06
Operation: Full automatic, semiautomatic, long-recoil
Cooled: Air
Weight: 19 lbs.
Overall length: 45.5 inches
Barrel length: 17 inches
Cyclic rate: 300 rounds per minute
Feed: 16-round detachable box magazine
Sights: Front: Blade.
Rear: V-notch tangent
Production: 19,241
Manufacturer: C.S.R.G. (Chauchat, Sutter, Ribeyrolle & Gladiator

Model: Marlin Machine Gun, Caliber .30, M1917/18
Caliber: .30-06
Operation: Full automatic, gas operated straight piston
Cooled: Air
Weight: 25.0 lbs.
Overall length: 40 inches
Barrel length: 24 inches
Cyclic rate: 600 rounds per minute
Feed: 250-round fabric belt
Sights: Front and rear sights varied by model and application. Ground guns had similar sights to theColt M1914. Other mountings used a variety of aircraft and anti-aircraft sights.
Production: 1917 (Navy): 1,605; 1917/18
Aircraft: 38,000
Manufacturer: Marlin Arms Corporation, Marlin-RockwellCompany

Model: U.S. Browning Automatic Rifle, Caliber .30,Model of 1918
Caliber: .30-06
Operation: Full automatic, semiautomatic, gas operation
Cooled: Air
Weight: 15.5 lbs.
Overall length: 47 inches
Barrel length: 24 inches
Cyclic rate: 550 rounds per minute
Feed: 20-round detachable box magazine
Sights: Front: Blade.
Rear: protected aperture style adjustable
Production: 102,125
Manufacturer: Winchester, Marlin-Rockwell, Colt

Model: Browning Machine Gun, Caliber .30, M1917A1
Caliber: .30-06
Operation: Full automatic, short recoil
Cooled: Water
Weight: Gun: 33 lbs. Tripod: 53 lbs.
Overall length: 38.5 inches
Barrel length: 24 inches
Cyclic rate: 500 rounds per minute
Feed: 250-round fabric belt
Sights: Front: Protected blade
Rear: Peep, adjustable leaf graduated to 2,600 yards.
Production: 55,859
Manufacturer: Rock Island Arsenal

Model: U.S. Browning Automatic Rifle, Caliber .30, Model of 1918A2
Caliber: .30-06
Operation: Full automatic, gas operation
Cooled: Air
Weight: 19.4 lbs.
Overall length: 47.8 inches
Barrel length: 24 inches
Cyclic rate: 300-450/ 500-650 rounds per minute
Feed: 20-round detachable box magazine
Sights: Front: Blade.
Rear: protected aperture style adjustable
Production: 249,380 total new production as A2
Manufacturer: New England Small Arms (NESA), 168,363; IBM Corporation, 20,017; Royal Typewriter Company, 61,000

Model: Browning Machine Gun, Caliber .30, M1919A6
Caliber: .30-06
Operation: Full automatic, short recoil
Cooled: Air
Weight: Gun: 32.5 lbs.
Overall length: 53 inches
Barrel length: 24 inches
Cyclic rate: 450 rounds per minute
Feed: 250-round fabric belt
Sights: Front: Folding blade
Rear: Peep, adjustable leaf graduated to 2,600 yards.
Production: 43,479
Manufacturer: Saginaw Steering Gear Div. of General Motors

Model: Browning Machine Gun, Caliber .30, M2 Caliber: .30-06
Operation: Full automatic, short recoil
Cooled: Air
Weight: 23.0 lbs
Overall length: 39.9 inches
Barrel length: 23.9 inches
Cyclic rate: 1,200 rounds per minute
Feed: disintegrating links Sights: Varied according to mounting
Production: Brown-Lipe-Chapin 33,311; Buffalo
Arms Co. 96,822; Savage 14,800; Colt 49,681
Manufacturer: Brown-Lipe-Chapin Div. General Motors, Buffalo Arms Company, Savage Arms, Corporation. Colt’s Patent Firearms Mfg.

Model: Browning Machine Gun, Caliber .30, M1919A4
Caliber: .30-06
Operation: Full automatic, short recoil
Cooled: Air
Weight: Gun: 31 lbs. Tripod: 14 lbs.
Overall length: 41 inches
Barrel length: 24 inches
Cyclic rate: 450-500 rounds per minute
Feed: 250-round fabric belt or disintegrating links
Sights: Front: Folding blade
Rear: Peep, adjustable leaf graduated to 2,400 yards.
Production: RIA 31,596; Saginaw 367,853; Buffalo 38,300. Total production of all M1919A4 variants from 1939 to 1945: 441,494.
Manufacturer: Rock Island Arsenal, Saginaw Steering Gear Div. of General Motors, Buffalo Arms Co

Model: U.S. Rifle, Caliber .30, M1
Caliber: .30-06
Operation: Semiautomatic, gas operated
Overall length: 43.6-inches
Barrel length: 24 inches, twist: right hand, 1 turn in 10 inches
Weight: 9.5 pounds
Magazine: 8 round enbloc clip
Sights: Front: Blade with protective ears
Rear: Aperture
Production: Approximately 5,468,772
Manufacturers: World War II: Springfield Armory, Winchester Korean War era: Harrington & Richardson, International Harvester, Springfield Armory

Model: M1941 Johnson Rifle
Caliber: .30-06
Operation: Semiautomatic, short recoil operated
Overall length: 45.87 inches
Barrel length: 22 inches, twist: right hand 1 turn in 10-inches
Weight: 9.5 pounds
Feed: Internal rotary type, 10 round capacity
Sights: Front: blade with protective ears
Rear: aperture type, graduated in meters
Production: Approximately 30,000
Manufacturer: Cranston Arms Company

Model: Model of 1941 Johnson Light Machine Gun
Caliber: .30-06
Operation: Full Automatic, semiautomatic, short recoil operated
Overall length: 42 inches
Barrel length: 22 inches, twist: right hand 1 turn in 10-inches
Weight: 13 pounds
Cyclic rate: 450 rounds per minute
Magazine: 20-round detachable box magazine
Sights: Front: blade with protective ears
Rear: Folding aperture type, graduated in meters
Production: Approximately 10,000
Manufacturer: Cranston Arms Company

Model: Browning Machine Gun, Caliber .30, M37
Caliber: .30-06
Operation: Full automatic, short recoil
Cooled: Air
Weight: 31 lbs.
Overall length: 41.75 inches
Barrel length: 24 inches
Cyclic rate: 450-550 rounds per minute
Feed: Disintegrating links
Sights: Added for C Front: Folding blade
Added for C Rear: Peep, adjustable leaf graduated to 2,400 yards.
Production: RIA 7,340; Saco, unknown
Manufacturer: Rock Island Arsenal, Saco-Lowell Shops

(Note: The M1903A4 depicted herein was unfired when purchased and came complete with original sling. The 82nd Airborne Division sniper is portrayed by Col. Tom Brown, USA (Ret), who spent several tours in the 82nd and in the 173rd Airborne Brigade in Vietnam. Col. Brown’s uniform and equipment are absolutely authentic for the fighting just after Normandy landings in 1944.)

The onset of World War II found the United States short of many weapons and military equipment, not the least of which was an infantry sniper rifle. Sniper rifles during World War I were converted from both M1903 and M1917 rifles, but between the wars sniping was neglected. Even after World War II began, sniping continued to be neglected and it wasn’t until January 1943 that the Army issued a directive to Remington Arms to set aside 20,000 M1903A3 receivers for conversion to sniper rifles.

There doesn’t seem to have been any formal accuracy requirements for the M1903A4; at least we couldn’t find any standards in any of the four reference books we consulted in preparing this article. According to noted martial arms historian Bruce Canfield, there was no special care taken in manufacturing the M1903A4 rifles and their accuracy was no better than standard service rifles. The trigger on our test rifle, for example, was the same as our standard Remington M1903A3 – hardly sniper grade with two stage 5.5 pound break and significant overtravel. There were other shortcomings, as well. Since no sights were fitted and the commercial Weaver telescopic sights were easily damaged, a damaged scope left the sniper with a very expensive club. Additionally, the scope was not moisture resistant, which was a real problem in the South Pacific campaigns. The Redfield “Junior” mount was nothing more than a commercial unit and the retaining screws reportedly loosened and fell out regularly, but replacements were difficult to obtain through the supply system. Moreover, the gross elevation of the Redfield mount was adjusted by inserting or removing shims. Initial windage was set by adjusting the large screws visible at the rear of the scope mount.

Whatever shortcomings it might have had, the M1903A4 was the only version of the M1903 to have been manufactured as a sniper rifle at the factory. All others were field conversions. The M1903A4 was intended as a stopgap until the M1 Garand could be redesigned as a sniper rifle, but in the end only a very few M1C sniper rifles saw action in World War II, while the M1903A4 was used in every theater of operation throughout the war.

Because there was no way of predicting whether or not a M1903A3 being manufactured as an M1903A4 would deliver acceptable accuracy, all M1903A4s were marked, “US Remington Model 03A3,” but the markings were different from standard M1903A3s in that they were offset to the left so they would not be covered by the Redfield scope mount. The idea was that if the rifle wasn’t sufficiently accurate, open sights would be installed and the rifle issued as a standard M1903A3. Thus, there are no M1903A4s marked as such as far as we have been able to determine. We should also note that every M1903A4 was made by Remington. Smith Corona, the other M1903A3 manufacturer, did not make any M1903A4s.

Like all M1903A3s, the M1903A4 may be found with any number of variations. Most had four groove barrels, but some two groove barrels were fitted as is the case with our test rifle. According to Major General Julian Hatcher, probably the foremost authority on early to mid 20th century military small arms, the two groove barrel had little, if any, negative effect on accuracy. In the case of our test rifle, we have to agree, since it has a two groove barrel and delivered very good accuracy.

M1903A4 stocks were generally the Type C full pistol grip, but many, like our test example, were fitted with the semi-pistol grip “scant grip.” About the only constants were the lack of open sights, the unusual markings, the bolt handle that was forged with a concave shape to clear the telescopic sight and the stock notched to accommodate the non-standard bolt handle.

There were two telescopic sights used, both variants of the 2.5x Weaver 330. The first scopes were marked commercially and had either tapered post or crosshair reticles. Later scopes were marked M73B1, the military designation for the Weaver 330. Our test rifle was fitted with the tapered post version of the commercial 330, although our rifle’s serial number indicates that it was in the last production batch of 6,300 M1903A4s. The final M1903A4s were manufactured in June 1944 when the M1C started being delivered in sufficient numbers to begin replacing the M1903A4.

There seems to be disagreement among the M1903 authorities on total numbers of M1903A4s manufactured. According to Bruce Canfield and Clark Campbell, the number was 28,365. On the other hand, Lt. Col. William Brophy states that 29,964 were produced. We probably will never know with certainty just how many were manufactured, except that the M1903A4 represents a tiny fraction of the 1 million plus M1903A3 type rifles produced by Remington during World War II. When Smith Corona production is added to the mix, the total M1903A3 production rises to nearly 1.5 million. So it is clear that the M1903A4 is one of the rarest production M1903s ever made representing less than 2% of total production, which has driven prices into the $3,000+ range for a good example.

The M1903A4 soldiered on after World War II, despite M1C and M1D sniper rifles that supposedly replaced it. M1903A4s were drawn from storage for the Korean War and surprisingly also saw service in Vietnam during the early stages of that conflict before other, more modern sniper rifles could be procured, making the M1903A4 the last version of the M1903 to remain in military service. Thus, the M1903A4 saw military service for over 20 years, indicating that it must have had some positive attributes. Just how good was the M1903A4 for its intended purpose?

According to Lt. Col. Brophy, the M1903A4 was “…at best a poor excuse for a sniper rifle.” The M1903A4 had no special attention given to its accuracy or its suitability for use as a sniper rifle. The Weaver scope had the benefit of being cheap and available and little else other than being simple to install. But in the context of the time, the M1903A4 wasn’t really significantly inferior to sniper rifles from other nations. The Russian PU with its 3.5x scope was really no better, nor was the German 98K. The British Number 4, Mark 1(T) wasn’t either. All were essentially bolt action service rifles that were pressed into sniper service, except for a few 98Ks that were specially made up as sniper rifles. Consequently, the M1903A4 was not better or worse than other sniper rifles of the time. When compared to sniper rifles from the Vietnam era, the M1903A4 comes off as inferior but, for its time, it did its job and from what research we have been able to discover, did it relatively well.

Our test M1903A4 was unfired when we discovered it in a local gun store and purchased it at a very reasonable price. Since it was new, we were advised by some that the rifle should remain in unfired condition to preserve its collector value. Nevertheless, we do not own firearms that we do not shoot and so shortly after obtaining our M1903A4, we boresighted it and headed to the range to zero it. We zeroed the rifle using Black Hills 168-grain match grade ammunition, but for this evaluation we also tested the 03A4 with Greek 1985 production military M2 Ball, duplicating the World War II 150-grain military load. We also tested Serbian Privi Partizan 180-grain ammunition, imported by Wolf. The Black Hills match delivered 1.25 minute of angle (MOA) at 100 yards (1.25 inches at 100 yards). MOA (1 inch at 100 yards) accuracy is considered acceptable for modern sniper rifles, so the 03A4 – at least our 03A4 – gives up little to modern precision rifles in terms of accuracy. Surprisingly, the Greek 150-grain ball ammunition was as accurate as the Black Hills 168-grain match; probably because the M1903A3 was designed around the M2 ball round. The Serbian Privi Partisan was about 2 MOA. The bottom line is that our M1903A4 delivered acceptable accuracy which would probably improve once the barrel was broken in by having a couple of hundred rounds fired through it.

The M1903A4 is an excellent representation of sniper rifle technology of the 1940s. As we have mentioned, sniper rifles of both our allies and enemies were not superior to the 03A4 in any meaningful way and the rifle delivers good accuracy using quality modern match or service grade ammunition. World War II snipers didn’t have access to match grade ammo like their modern day counterparts, so the Greek ball ammunition test groups are probably more in keeping with 60+ year old reality. Probably the most significant shortfall of the M1903A4 was its scope, but it must be remembered that during World War II, everything was in short supply and the Army had to get its scopes from a company that could deliver the necessary quantities within a short time. The Weaver 330 was good enough for the task at hand. All in all, the M1903A4 was satisfactory for its intended purpose and, like most soldiers and Marines of the period, served its country well.

Everyone who shot our “old soldier” was overjoyed at being able to shoot a rare piece of American military history. We probably will not shoot our M1903A4 frequently, as it is too valuable for frequent trips to the range, but rest assured that it will continue to do what it was designed to do – shoot with reasonable accuracy from time to time and deliver some enjoyment in the process.