The new SMC Bravo is made of Polymer Extreme which is durable and lightweight — intended to receive P320 FCU’s and slides to complete the entire ensemble. This time around users can fully utilize their P320 optic-ready slides to effortlessly install their red dot sights. In terms of upgraded features, SI says the Bravo’s ergonomics have improved with a textured grip which now includes a built-in flared magwell to assist with quick and smooth reloads.

The optional Ambidextrous Side Charging Handle with a Slide Cover Mount for the P320 is also compatible, so Bravo users can decide which side they want to rack the slide with. This chassis also accepts a wider array of P320 magazines. Users will also enjoy the integrated gas pedal above the Picatinny rail that helps fight muzzle flip and allows faster follow-up shots.

Derived from the SMC Alpha, the Bravo remains consistent as it comes with the SMC Rear Module Backstrap molded onto the new chassis as one solid piece. It offers users rear ambidextrous QD sockets and a Picatinny rail mount, perfect for attaching various accessories like the Strike Dual Folding Stock/Brace. The ambi QD sockets in the rear can be used with slings and can even have a lanyard or paracord strung through it for easy access from storage.

PRODUCT FEATURES

• Ambi QD sockets at the rear w/ loop-thru design so its possible to loop a lanyard or paracord
• Built-in magwell for better magazine feeding
• Flat magazine hole opening; this make the grip module able to use more different types of P320 magazines
• Works with Ambidextrous Side Charging Handle with Slide Cover Mount
• Extended picatinny rail located at front bottom of chassis and on Rear Module Backstrap for accessories
• Compatible with optional Spare Magazine Holder for SIG SAUER P320 with SI Modular Magazine Release
• SMC Bravo for SIG SAUER P320 uses SIG SAUER P320 OEM fitment takedown lever and P320 magazine release, SI Modular Magazine Release is pre-assembled and included

COMPATIBILITY:

• AR-10, DPMS/LR308, SR-25 lower receivers
• Aero Precision M5 lower receivers have slight generation differences. Due to generation versions and tolerances, newer gen M5 lowers fit rear takedown pin slightly better than older gen M5.

NOT COMPATIBLE:

• ArmaLite AR-10
• Some billet lower receivers due to no Mil-Spec standard
• Takedown Pin is not compatible with AR-15 lower receivers

RED DOT COMPATIBILITY

• Aimpoint ACRO P-1, P-2
• Steiner MPS (Micro Pistol Sight) [see NOTE]
• Atibal Sights e2 Enclosed Red Dot
• Lucid Optics E7
• Lead and Steel Pandora PB-3 Micro Red Dot Sight
• Viridian Weapon Technologies RFX45

MOUNT COMPATIBILITY

• Slide cuts and mounts using correct Trijicon RMR footprint dimensions
• SI LITESLIDE for GLOCK G17 or G19 GEN3
• Strike Slide for GLOCK G17 or G19 GEN3

FEATURES

• Easily adapt RMR footprint to work with Aimpoint® ACRO footprint sights
• Works with front RMR footprint recoil bosses/indexing posts
• Also includes SI front mounting posts for use with RMR SI LITESLIDE/Strike Slide
• Hardware included for both standard (#6-32) and metric (M3) screw holes
• Lightweight and high-strength
• Machined from 6061-T6 aluminum

Features:

• Adapter for CZ Scorpion to use AR pistol grips
• For both AR pistol grips with beavertail or flat top designs
• Included gap filler for upper receiver oval screw hole
• Lightweight and high-strength
• Machined from 6061-T6 Aluminum
• Compatible with all CZ Scorpion EVO models including 3+
• Perfect pairing with one of the various S.I. AR Grips available

Specifications:

• LENGTH: 3.2 in.
• WIDTH: 2.3 in.
• HEIGHT: 1.7 in.
• WEIGHT: 2.98 oz

Product Features:

• Configured to be installed on either left or right side
• Stand-alone P320 ambi side charging handle
• Charging handle length design to be compatible with most red dots on the market
• Quick and easy installation with steel rear Slide Cover Mount
• Included rubber pads to prevent marring of slide finish/coating
• No permanent modification of weapon required
• Slide Cover Mount made from S45C steel with HRC40-45 heat treatment and black oxide finish
• Charging Handle made from 6061-T6 aluminum
• MSRP: $39.95

Product Specifications:

SIDE CHARGING HANDLE:

• LENGTH: 38.17mm(1.51″)
• WIDTH: 39.00mm(1.54″)
• HEIGHT: 10.00mm(0.39″)
• WEIGHT: 0.17 oz

SLIDE COVER MOUNT:

• LENGTH: 16.20mm(0.64″)
• WIDTH: 15.55mm(0.61″)
• HEIGHT: 22.50mm(0.86″)
• WEIGHT: 0.56 oz
• WEIGHT W/ PKG: 1.30 oz

It’s machined from 6061-T6 aluminum, making it sturdier and more durable than polymer competitors. The SMC Standard length is designed to work with the full-size P320 4.7in slide and barrel. When used with a carry or compact P320 3.9” slide and barrel, the SMC chassis’ dust cover will overhang the muzzle. (Using the SMC Standard with a P320 3.6in slide and barrel is not recommended.)

Included in the box is an ambidextrous side charging handle with slide cover mount so an SMC-equipped P320 can be racked from either side of the slide. The SMC rear module backstrap is pre-installed, giving you rear ambidextrous QD sockets and a rear Picatinny rail mount to attach accessories. The SMC Multi-Optic Mount allows you to use just about any mini red dot sight (MRDS). It’s compatible with optics that use footprints from C-More, Leupold DeltaPoint Pro, Docter/Noblex, Trijicon RMR, Shield Sight and all SIG Sauer open reflex sights. The SMC chassis and optional it’s optional spare magazine holder both include the SI Modular Magazine Release.

Product Features:

• Included Ambidextrous Side Charging Handle with Slide Cover Mount
• Works with SMC Rear Module Backstrap (included) and can be configured as a conventional P320 grip module with optional SMC LITE Backstrap (sold separately)
• SMC Multi-Optic Mount (Footprints: C-More, DeltaPoint Pro, Docter/Noblex, RMR, Shield and all SIG SAUER Open Reflex Sights)
• Ambidextrous QD sockets located on SMC Rear Module Backstrap
• Picatinny rail located at front bottom of chassis and on Rear Module Backstrap for accessories
• Optional to use Spare Magazine Holder for SIG SAUER P320 with SI Modular Magazine Release is included
• SMC ALPHA for SIG SAUER P320 (Standard) uses SIG SAUER P320 OEM fitment takedown lever and P320 magazine release, SI Modular Magazine Release is pre-assembled and included
• Machined from 6061-T6 aluminum, sturdier and more durable than polymer