Small Arms Review
  • Home
  • Articles
    • Guns & Parts
    • Suppressors
    • Optics & Thermals
    • Ammunition
    • Gear
    • News & Opinion
    • Columns
    • Museums & Factory Tours
    • ID Guides
    • Interviews
    • Event Coverage
    • Articles by Issue
      • Volume 1
        • V1N1 (Oct 1997)
        • V1N2 (Nov 1997)
        • V1N3 (Dec 1997)
        • V1N4 (Jan 1998)
        • V1N5 (Feb 1998)
        • V1N6 (Mar 1998)
        • V1N7 (Apr 1998)
        • V1N8 (May 1998)
        • V1N9 (Jun 1998)
        • V1N10 (Jul 1998)
        • V1N11 (Aug 1998)
        • V1N12 (Sep 1998)
      • Volume 2
        • V2N1 (Oct 1998)
        • V2N2 (Nov 1998)
        • V2N3 (Dec 1998)
        • V2N4 (Jan 1999)
        • V2N5 (Feb 1999)
        • V2N6 (Mar 1999)
        • V2N7 (Apr 1999)
        • V2N8 (May 1999)
        • V2N9 (Jun 1999)
        • V2N10 (Jul 1999)
        • V2N11 (Aug 1999)
        • V2N12 (Sep 1999)
      • Volume 3
        • V3N1 (Oct 1999)
        • V3N2 (Nov 1999)
        • V3N3 (Dec 1999)
        • V3N4 (Jan 2000)
        • V3N5 (Feb 2000)
        • V3N6 (Mar 2000)
        • V3N7 (Apr 2000)
        • V3N8 (May 2000)
        • V3N9 (Jun 2000)
        • V3N10 (Jul 2000)
        • V3N11 (Aug 2000)
        • V3N12 (Sep 2000)
      • Volume 4
        • V4N1 (Oct 2000)
        • V4N2 (Nov 2000)
        • V4N3 (Dec 2000)
        • V4N4 (Jan 2001)
        • V4N5 (Feb 2001)
        • V4N6 (Mar 2001)
        • V4N7 (Apr 2001)
        • V4N8 (May 2001)
        • V4N9 (Jun 2001)
        • V4N10 (Jul 2001)
        • V4N11 (Aug 2001)
        • V4N12 (Sep 2001)
      • Volume 5
        • V5N1 (Oct 2001)
        • V5N2 (Nov 2001)
        • V5N3 (Dec 2001)
        • V5N4 (Jan 2002)
        • V5N5 (Feb 2002)
        • V5N6 (Mar 2002)
        • V5N7 (Apr 2002)
        • V5N8 (May 2002)
        • V5N9 (Jun 2002)
        • V5N10 (Jul 2002)
        • V5N11 (Aug 2002)
        • V5N12 (Sep 2002)
      • Volume 6
        • V6N1 (Oct 2002)
        • V6N2 (Nov 2002)
        • V6N3 (Dec 2002)
        • V6N4 (Jan 2003)
        • V6N5 (Feb 2003)
        • V6N6 (Mar 2003)
        • V6N7 (Apr 2003)
        • V6N8 (May 2003)
        • V6N9 (Jun 2003)
        • V6N10 (Jul 2003)
        • V6N11 (Aug 2003)
        • V6N12 (Sep 2003)
      • Volume 7
        • V7N1 (Oct 2003)
        • V7N2 (Nov 2003)
        • V7N3 (Dec 2003)
        • V7N4 (Jan 2004)
        • V7N5 (Feb 2004)
        • V7N6 (Mar 2004)
        • V7N7 (Apr 2004)
        • V7N8 (May 2004)
        • V7N9 (Jun 2004)
        • V7N10 (Jul 2004)
        • V7N11 (Aug 2004)
        • V7N12 (Sep 2004)
      • Volume 8
        • V8N1 (Oct 2004)
        • V8N2 (Nov 2004)
        • V8N3 (Dec 2004)
        • V8N4 (Jan 2005)
        • V8N5 (Feb 2005)
        • V8N6 (Mar 2005)
        • V8N7 (Apr 2005)
        • V8N8 (May 2005)
        • V8N9 (Jun 2005)
        • V8N10 (Jul 2005)
        • V8N11 (Aug 2005)
        • V8N12 (Sep 2005)
      • Volume 9
        • V9N1 (Oct 2005)
        • V9N2 (Nov 2005)
        • V9N3 (Dec 2005)
        • V9N4 (Jan 2006)
        • V9N5 (Feb 2006)
        • V9N6 (Mar 2006)
        • V9N7 (Apr 2006)
        • V9N8 (May 2006)
        • V9N9 (Jun 2006)
        • V9N10 (Jul 2006)
        • V9N11 (Aug 2006)
        • V9N12 (Sep 2006)
      • Volume 10
        • V10N1 (Oct 2006)
        • V10N2 (Nov 2006)
        • V10N3 (Dec 2006)
        • V10N4 (Jan 2007)
        • V10N5 (Feb 2007)
        • V10N6 (Mar 2007)
        • V10N7 (Apr 2007)
        • V10N8 (May 2007)
        • V10N9 (Jun 2007)
        • V10N10 (Jul 2007)
        • V10N11 (Aug 2007)
        • V10N12 (Sep 2007)
      • Volume 11
        • V11N1 (Oct 2007)
        • V11N2 (Nov 2007)
        • V11N3 (Dec 2007)
        • V11N4 (Jan 2008)
        • V11N5 (Feb 2008)
        • V11N6 (Mar 2008)
        • V11N7 (Apr 2008)
        • V11N8 (May 2008)
        • V11N9 (Jun 2008)
        • V11N10 (Jul 2008)
        • V11N11 (Aug 2008)
        • V11N12 (Sep 2008)
      • Volume 12
        • V12N1 (Oct 2008)
        • V12N2 (Nov 2008)
        • V12N3 (Dec 2008)
        • V12N4 (Jan 2009)
        • V12N5 (Feb 2009)
        • V12N6 (Mar 2009)
        • V12N7 (Apr 2009)
        • V12N8 (May 2009)
        • V12N9 (Jun 2009)
        • V12N10 (Jul 2009)
        • V12N11 (Aug 2009)
        • V12N12 (Sep 2009)
      • Volume 13
        • V13N1 (Oct 2009)
        • V13N2 (Nov 2009)
        • V13N3 (Dec 2009)
        • V13N4 (Jan 2010)
        • V13N5 (Feb 2010)
        • V13N6 (Mar 2010)
        • V13N7 (Apr 2010)
        • V13N8 (May 2010)
        • V13N9 (Jun 2010)
        • V13N10 (Jul 2010)
        • V13N11 (Aug 2010)
        • V13N12 (Sep 2010)
      • Volume 14
        • V14N1 (Oct 2010)
        • V14N2 (Nov 2010)
        • V14N3 (Dec 2010)
          • Ammunition
        • V14N4 (Jan 2011)
        • V14N5 (Feb 2011)
        • V14N6 (Mar 2011)
        • V14N7 (Apr 2011)
        • V14N8 (May 2011)
        • V14N9 (Jun 2011)
        • V14N10 (Jul 2011)
        • V14N11 (Aug 2011)
        • V14N12 (Sep 2011)
      • Volume 15
        • V15N1 (Oct 2011)
        • V15N2 (Nov 2011)
        • V15N4 (Jan 2012)
        • V15N5 (Feb 2012)
      • Volume 16
        • V16N1 (1st Quarter 2012)
        • V16N2 (2nd Quarter 2012)
        • V16N3 (3rd Quarter 2012)
        • V16N4 (4th Quarter 2012)
      • Volume 17
        • V17N1 (1st Quarter 2013)
        • V17N2 (2nd Quarter 2013)
        • V17N3 (3rd Quarter 2013)
        • V17N4 (4th Quarter 2013)
      • Volume 18
        • V18N1 (Jan Feb 2014)
        • V18N2 (Mar Apr 2014)
        • V18N3 (May Jun 2014)
        • V18N4 (Jul Aug 2014)
        • V18N5 (Sep Oct 2014)
        • V18N6 (Nov Dec 2014)
      • Volume 19
        • V19N1 (Jan 2015)
        • V19N2 (Feb Mar 2015)
        • V19N3 (Apr 2015)
        • V19N4 (May 2015)
        • V19N5 (Jun 2015)
        • V19N6 (Jul 2015)
        • V19N7 (Aug Sep 2015)
        • V19N8 (Oct 2015)
        • V19N9 (Nov 2015)
        • V19N10 (Dec 2015)
      • Volume 20
        • V20N1 (Jan 2016)
        • V20N2 (Feb Mar 2016)
        • V20N3 (Apr 2016)
        • V20N4 (May 2016)
        • V20N5 (Jun 2016)
        • V20N6 (Jul 2016)
        • V20N7 (Aug Sep 2016)
        • V20N8 (Oct 2016)
        • V20N9 (Nov 2016)
        • V20N10 (Dec 2016)
      • Volume 21
        • V21N1 (Jan 2017)
        • V21N2 (Feb Mar 2017)
        • V21N3 (Apr 2017)
        • V21N4 (May 2017)
        • V21N5 (Jun 2017)
        • V21N6 (Jul 2017)
        • V21N7 (Aug Sep 2017)
        • V21N8 (Oct 2017)
        • V21N9 (Nov 2017)
        • V21N10 (Dec 2017)
      • Volume 22
        • V22N1 (Jan 2018)
        • V22N2 (Feb 2018)
        • V22N3 (March 2018)
        • V22N4 (Apr 2018)
        • V22N5 (May 2018)
        • V22N6 (Jun Jul 2018)
        • V22N7 (Aug Sep 2018)
        • V22N8 (Oct 2018)
        • V22N9 (Nov 2018)
        • V22N10 (Dec 2018)
      • Volume 23
        • V23N1 (Jan 2019)
        • V23N2 (Feb 2019)
        • V23N3 (Mar 2019)
        • V23N4 (Apr 2019)
        • V23N5 (May 2019)
        • V23N6 (Jun Jul 2019)
        • V23N7 (Aug Sep 2019)
        • V23N8 (Oct 2019)
        • V23N9 (Nov 2019)
        • V23N10 (Dec 2019)
      • Volume 24
        • V24N1 (Jan 2020)
        • V24N2 (Feb 2020)
        • V24N3 (Mar 2020)
        • V24N4 (Apr 2020)
        • V24N5 (May 2020)
        • V24N6 (Jun Jul 2020)
        • V24N7 (Aug Sep 2020)
        • V24N8 (Oct 2020)
        • V24N9 (Nov 2020)
        • V24N10 (Dec 2020)
  • The Archive
    • Search The Archive
  • Store
    • Books
    • Back Issues
    • Merchandise
  • Events
  • About
    • About Small Arms Review
    • About Chipotle Publishing
    • Contact Us
    • Other Publications
      • Small Arms Defense Journal
  • Home
  • Articles
    • Guns & Parts
    • Suppressors
    • Optics & Thermals
    • Ammunition
    • Gear
    • News & Opinion
    • Columns
    • Museums & Factory Tours
    • ID Guides
    • Interviews
    • Event Coverage
    • Articles by Issue
      • Volume 1
        • V1N1 (Oct 1997)
        • V1N2 (Nov 1997)
        • V1N3 (Dec 1997)
        • V1N4 (Jan 1998)
        • V1N5 (Feb 1998)
        • V1N6 (Mar 1998)
        • V1N7 (Apr 1998)
        • V1N8 (May 1998)
        • V1N9 (Jun 1998)
        • V1N10 (Jul 1998)
        • V1N11 (Aug 1998)
        • V1N12 (Sep 1998)
      • Volume 2
        • V2N1 (Oct 1998)
        • V2N2 (Nov 1998)
        • V2N3 (Dec 1998)
        • V2N4 (Jan 1999)
        • V2N5 (Feb 1999)
        • V2N6 (Mar 1999)
        • V2N7 (Apr 1999)
        • V2N8 (May 1999)
        • V2N9 (Jun 1999)
        • V2N10 (Jul 1999)
        • V2N11 (Aug 1999)
        • V2N12 (Sep 1999)
      • Volume 3
        • V3N1 (Oct 1999)
        • V3N2 (Nov 1999)
        • V3N3 (Dec 1999)
        • V3N4 (Jan 2000)
        • V3N5 (Feb 2000)
        • V3N6 (Mar 2000)
        • V3N7 (Apr 2000)
        • V3N8 (May 2000)
        • V3N9 (Jun 2000)
        • V3N10 (Jul 2000)
        • V3N11 (Aug 2000)
        • V3N12 (Sep 2000)
      • Volume 4
        • V4N1 (Oct 2000)
        • V4N2 (Nov 2000)
        • V4N3 (Dec 2000)
        • V4N4 (Jan 2001)
        • V4N5 (Feb 2001)
        • V4N6 (Mar 2001)
        • V4N7 (Apr 2001)
        • V4N8 (May 2001)
        • V4N9 (Jun 2001)
        • V4N10 (Jul 2001)
        • V4N11 (Aug 2001)
        • V4N12 (Sep 2001)
      • Volume 5
        • V5N1 (Oct 2001)
        • V5N2 (Nov 2001)
        • V5N3 (Dec 2001)
        • V5N4 (Jan 2002)
        • V5N5 (Feb 2002)
        • V5N6 (Mar 2002)
        • V5N7 (Apr 2002)
        • V5N8 (May 2002)
        • V5N9 (Jun 2002)
        • V5N10 (Jul 2002)
        • V5N11 (Aug 2002)
        • V5N12 (Sep 2002)
      • Volume 6
        • V6N1 (Oct 2002)
        • V6N2 (Nov 2002)
        • V6N3 (Dec 2002)
        • V6N4 (Jan 2003)
        • V6N5 (Feb 2003)
        • V6N6 (Mar 2003)
        • V6N7 (Apr 2003)
        • V6N8 (May 2003)
        • V6N9 (Jun 2003)
        • V6N10 (Jul 2003)
        • V6N11 (Aug 2003)
        • V6N12 (Sep 2003)
      • Volume 7
        • V7N1 (Oct 2003)
        • V7N2 (Nov 2003)
        • V7N3 (Dec 2003)
        • V7N4 (Jan 2004)
        • V7N5 (Feb 2004)
        • V7N6 (Mar 2004)
        • V7N7 (Apr 2004)
        • V7N8 (May 2004)
        • V7N9 (Jun 2004)
        • V7N10 (Jul 2004)
        • V7N11 (Aug 2004)
        • V7N12 (Sep 2004)
      • Volume 8
        • V8N1 (Oct 2004)
        • V8N2 (Nov 2004)
        • V8N3 (Dec 2004)
        • V8N4 (Jan 2005)
        • V8N5 (Feb 2005)
        • V8N6 (Mar 2005)
        • V8N7 (Apr 2005)
        • V8N8 (May 2005)
        • V8N9 (Jun 2005)
        • V8N10 (Jul 2005)
        • V8N11 (Aug 2005)
        • V8N12 (Sep 2005)
      • Volume 9
        • V9N1 (Oct 2005)
        • V9N2 (Nov 2005)
        • V9N3 (Dec 2005)
        • V9N4 (Jan 2006)
        • V9N5 (Feb 2006)
        • V9N6 (Mar 2006)
        • V9N7 (Apr 2006)
        • V9N8 (May 2006)
        • V9N9 (Jun 2006)
        • V9N10 (Jul 2006)
        • V9N11 (Aug 2006)
        • V9N12 (Sep 2006)
      • Volume 10
        • V10N1 (Oct 2006)
        • V10N2 (Nov 2006)
        • V10N3 (Dec 2006)
        • V10N4 (Jan 2007)
        • V10N5 (Feb 2007)
        • V10N6 (Mar 2007)
        • V10N7 (Apr 2007)
        • V10N8 (May 2007)
        • V10N9 (Jun 2007)
        • V10N10 (Jul 2007)
        • V10N11 (Aug 2007)
        • V10N12 (Sep 2007)
      • Volume 11
        • V11N1 (Oct 2007)
        • V11N2 (Nov 2007)
        • V11N3 (Dec 2007)
        • V11N4 (Jan 2008)
        • V11N5 (Feb 2008)
        • V11N6 (Mar 2008)
        • V11N7 (Apr 2008)
        • V11N8 (May 2008)
        • V11N9 (Jun 2008)
        • V11N10 (Jul 2008)
        • V11N11 (Aug 2008)
        • V11N12 (Sep 2008)
      • Volume 12
        • V12N1 (Oct 2008)
        • V12N2 (Nov 2008)
        • V12N3 (Dec 2008)
        • V12N4 (Jan 2009)
        • V12N5 (Feb 2009)
        • V12N6 (Mar 2009)
        • V12N7 (Apr 2009)
        • V12N8 (May 2009)
        • V12N9 (Jun 2009)
        • V12N10 (Jul 2009)
        • V12N11 (Aug 2009)
        • V12N12 (Sep 2009)
      • Volume 13
        • V13N1 (Oct 2009)
        • V13N2 (Nov 2009)
        • V13N3 (Dec 2009)
        • V13N4 (Jan 2010)
        • V13N5 (Feb 2010)
        • V13N6 (Mar 2010)
        • V13N7 (Apr 2010)
        • V13N8 (May 2010)
        • V13N9 (Jun 2010)
        • V13N10 (Jul 2010)
        • V13N11 (Aug 2010)
        • V13N12 (Sep 2010)
      • Volume 14
        • V14N1 (Oct 2010)
        • V14N2 (Nov 2010)
        • V14N3 (Dec 2010)
          • Ammunition
        • V14N4 (Jan 2011)
        • V14N5 (Feb 2011)
        • V14N6 (Mar 2011)
        • V14N7 (Apr 2011)
        • V14N8 (May 2011)
        • V14N9 (Jun 2011)
        • V14N10 (Jul 2011)
        • V14N11 (Aug 2011)
        • V14N12 (Sep 2011)
      • Volume 15
        • V15N1 (Oct 2011)
        • V15N2 (Nov 2011)
        • V15N4 (Jan 2012)
        • V15N5 (Feb 2012)
      • Volume 16
        • V16N1 (1st Quarter 2012)
        • V16N2 (2nd Quarter 2012)
        • V16N3 (3rd Quarter 2012)
        • V16N4 (4th Quarter 2012)
      • Volume 17
        • V17N1 (1st Quarter 2013)
        • V17N2 (2nd Quarter 2013)
        • V17N3 (3rd Quarter 2013)
        • V17N4 (4th Quarter 2013)
      • Volume 18
        • V18N1 (Jan Feb 2014)
        • V18N2 (Mar Apr 2014)
        • V18N3 (May Jun 2014)
        • V18N4 (Jul Aug 2014)
        • V18N5 (Sep Oct 2014)
        • V18N6 (Nov Dec 2014)
      • Volume 19
        • V19N1 (Jan 2015)
        • V19N2 (Feb Mar 2015)
        • V19N3 (Apr 2015)
        • V19N4 (May 2015)
        • V19N5 (Jun 2015)
        • V19N6 (Jul 2015)
        • V19N7 (Aug Sep 2015)
        • V19N8 (Oct 2015)
        • V19N9 (Nov 2015)
        • V19N10 (Dec 2015)
      • Volume 20
        • V20N1 (Jan 2016)
        • V20N2 (Feb Mar 2016)
        • V20N3 (Apr 2016)
        • V20N4 (May 2016)
        • V20N5 (Jun 2016)
        • V20N6 (Jul 2016)
        • V20N7 (Aug Sep 2016)
        • V20N8 (Oct 2016)
        • V20N9 (Nov 2016)
        • V20N10 (Dec 2016)
      • Volume 21
        • V21N1 (Jan 2017)
        • V21N2 (Feb Mar 2017)
        • V21N3 (Apr 2017)
        • V21N4 (May 2017)
        • V21N5 (Jun 2017)
        • V21N6 (Jul 2017)
        • V21N7 (Aug Sep 2017)
        • V21N8 (Oct 2017)
        • V21N9 (Nov 2017)
        • V21N10 (Dec 2017)
      • Volume 22
        • V22N1 (Jan 2018)
        • V22N2 (Feb 2018)
        • V22N3 (March 2018)
        • V22N4 (Apr 2018)
        • V22N5 (May 2018)
        • V22N6 (Jun Jul 2018)
        • V22N7 (Aug Sep 2018)
        • V22N8 (Oct 2018)
        • V22N9 (Nov 2018)
        • V22N10 (Dec 2018)
      • Volume 23
        • V23N1 (Jan 2019)
        • V23N2 (Feb 2019)
        • V23N3 (Mar 2019)
        • V23N4 (Apr 2019)
        • V23N5 (May 2019)
        • V23N6 (Jun Jul 2019)
        • V23N7 (Aug Sep 2019)
        • V23N8 (Oct 2019)
        • V23N9 (Nov 2019)
        • V23N10 (Dec 2019)
      • Volume 24
        • V24N1 (Jan 2020)
        • V24N2 (Feb 2020)
        • V24N3 (Mar 2020)
        • V24N4 (Apr 2020)
        • V24N5 (May 2020)
        • V24N6 (Jun Jul 2020)
        • V24N7 (Aug Sep 2020)
        • V24N8 (Oct 2020)
        • V24N9 (Nov 2020)
        • V24N10 (Dec 2020)
  • The Archive
    • Search The Archive
  • Store
    • Books
    • Back Issues
    • Merchandise
  • Events
  • About
    • About Small Arms Review
    • About Chipotle Publishing
    • Contact Us
    • Other Publications
      • Small Arms Defense Journal


No Result
View All Result
Small Arms Review


No Result
View All Result
Home Articles

Habits of Highly Unsuccessful Firearms Technicians

by SAR Staff
January 1, 2016
in Articles, Articles by Issue, Guns & Parts, Search by Issue, V20N1 (Jan 2016), Volume 20
Habits of Highly Unsuccessful Firearms Technicians
Share on FacebookShare on Twitter

GE-Developed General Purpose 7.62mm Armor Machine Gun (Author’s Collection)

By George E. Kontis, P.E.

I had started a new job with Ajaxx Gun Works and was meeting with the Engineering Director to discuss my first assignment. Based on my past experience as a product engineer, the Director entrusted me with a project to find the cause and correction for malfunctions on a new automatic rifle that were occurring during automatic fire.

Two firearms technicians had been assigned to work under my direction. The Director asked me to proceed to the range immediately as the technicians would have the guns and the test equipment ready. “Are these two guys any good?” I asked him. “Beener has been with Ajaxx nine years and Chumwell has been here twenty two. Chumwell is the steward of the technician’s union,” he responded. “They both have done a lot of testing. Chumwell has an excellent attendance record. He only missed work when he blew the end of his finger off during a test. He put his finger over an open pressure transducer hole in a cannon barrel. Chumwell noticed he had forgotten to put the transducer in and decided he could plug it with his finger. He’s learned a lot since then.” That really wasn’t the answer I was looking for, but it did speak volumes. I let it all go as I was eager to begin the tests.

Beener & Crumwell Display Talents of Their Well-earned Reputation (Courtesy Howard Kent)

At the test site I found only one technician and introduced myself to Chumwell. When I inquired the whereabouts of Beener I learned that he went to get fans. Silently I told myself that fans might be a good idea to cool the guns and move the testing along more quickly. On the table was a stack of guns thrown together in a heap. Nearby was a pile of linked ammunition. “This can’t be our ammo– it’s linked.” I said. “These guns need loose ammo and delinking it will take a lot of our time.” Chumwell said somebody had forgotten to replenish their ammunition supply, but not to worry, because a couple of technicians who normally clean guns would be sent out to delink ammunition for us. “We’ll have to wait for them because we don’t delink ammo.” Chumwell announced. “It’s not in our job description.”

Finally Beener arrived with the fans and it was only then I learned that the fans were not for the guns, they were brought out so my two test technicians didn’t get hot while shooting. Poor dears! Beener switched on the three fans, acoustically transforming our quiet test site to the likes of an active airport runway. I watched as papers, cups, and other small items flew everywhere, and decided to keep my hearing protection on for the duration of the test.

I called Chumwell and Beener over for a meeting so I could outline the tests I wanted to have performed. When I got to the part where I talked about re-lubing the guns, Beener informed me that they didn’t have gun lube at the test site. They never bring it out because, in their opinion, the guns seem to have plenty lube when they come out of the gun cleaning department. Beener was noticeably unhappy when I informed him he would be making a trip back to the factory for lubricant, just as soon as our meeting was over.

AMG brochure (General Electric Co.)

It was close to noon by the time Beener arrived with gun lube and the gun cleaners had finished delinking our ammo. Over Chumwell’s objection that it was too close to their lunch hour, I insisted that we begin testing. Not long into the test cycle we encountered our first malfunction. I examined both the gun and the damaged fired case. The ejection port was supposed to be lengthened on this gun. I wondered if that operation could have been missed by the prototype shop. It was easy enough to check. I reached in my pocket for a scale and moved it in the direction of the ejection port. I was surprised to find Chumwell’s hand suddenly blocking mine. “If you want something measured, we’ll do it. We’re the engineering technicians,” he said. When I voiced my disapproval, Chumwell got testier. “If you decide to measure it on your own, I’ll file a union grievance.” Oddly, I found myself thinking about my grandmother. “You can tell if it’s going to be a good day by the way it starts,” she always said. If true, this was going to be a very long day and I was beginning to have my doubts about Ajaxx.

As the testing continued and the number of malfunctions mounted, I was curious as to how many stoppages we’d encountered. I asked Chumwell to hand me the test firing log so I could count them. Chumwell informed me there was no log. Yelling over the din of the three fans, he said: “See these marks here on the table?” He pointed to a series of vertical lines grouped in a series of four with a crossed line indicating the fifth. There were two like this and a single as well. The marks indicated we’d had eleven malfunctions. “We keep track with them this way. We also know how many rounds we bought out and how many we turn back in. That gives us our round count,” he announced proudly. “Hey, what more do you need to know?” I thought about mentioning that some of the malfunctions were failures to extract while others were short recoil failures. Their system didn’t account for the difference, but at this stage I decided it was pointless.

Velocity-Displacement plotter data from 50 round burst on AMG (Author)

In the next round of tests, a part failed. I asked them to replace it so we could continue. “There are no spares out here,” came the reply from one of them. “It’s too much trouble to bring them out.” During the long wait for the replacement part to arrive from the plant, I noticed a screw had loosened on one of the guns. I pointed it out to Beener and asked him to tighten it. Moving faster than he had all day, he reached into a leather pouch on his belt and proudly drew out a multi-purpose tool. I stopped him. “Don’t we have any screwdrivers?” “Oh, we can do whatever we need with these,” Beener responded, smiling as he proudly pointed out the many features of the tool. I’d had enough. I walked over to each fan, turned it off and motioned to the two technicians in for a discussion. “The next time you guys run a test for me, I want to see a toolbox filled with real tools and a bottle of gun lube. I’m also going to draw up a sample range test log, and I want you two to keep a record of every round fired and every malfunction.” Beener and Chumwell were not happy, but I didn’t care. I found myself rethinking the wisdom of my decision to sign up with the Ajaxx Gun Works.

Now it’s time for a confession. I never worked for Ajaxx Gun Works and as far as I know, a company with that name has never existed. I have never worked with technicians named Beener or Chumwell either. The events related, however, are based on actual events that either happened to me or they were told to me by other engineers in our industry.

Bill Frigon, George Kontis point out important features to Reggie Laferriere and Tom McGrath from Production look on. (Author’s Collection)

I told this tale to illustrate an important point. A good engineering technician is essential to the development and production of every firearm. In every place I’ve worked, I have been fortunate to have worked with outstanding technicians. There were, however, a very few who made the job more demanding.

I measure the performance of every firearms technician against the one who stood out above the rest. Bill Frigon received his training at the U.S. Government’s Springfield Armory and went to work for the General Electric Company, Armament Systems Division after the Armory closed in 1968. He was an amazing engineering technician.

Bill was assigned to work with me in the development of a 7.62mm General Purpose Armor Machine Gun (called GPAM and later designated AMG). The Army had funded GE, Hughes, Maremont and others, to develop a coaxial machine gun for the M1 Tank. The Army realized they had made a huge mistake by introducing the Springfield Armory designed M73—which they later called the M219.

Typical Time-Velocity Data from machine Gun (Author)

Before we took the AMG to the firing range for the first time, Bill asked if he could spend some time in the drafting/design office. I was curious as to the reason for this unusual request and was quite pleased to learn that Bill wanted to go through the weapon cycle with the designers. He wanted to look at the individual piece part drawings to see how they were dimensioned and to see what materials and surface treatments were used. A few days later, I was less happy when Bill informed me he was not yet ready to go to the range. I reminded him he had already spent quite a lot of time up in the drafting department and down in the engineering lab. Now what was he doing?

Bill invited me to visit him in his work area so he could better explain. There he proudly showed me a large pile of compartmentalized plastic boxes filled with parts. He had labeled each compartment with the name and part number of each of the spare parts we’d built to support our testing. Bill also showed me a chart he’d constructed. With the drafting room’s help, he had developed a table of events for the gun cycle. Where did the feed stroke begin? Where did it end? What was the location of the barrel extension when the bolt began its acceleration to the rear? Significant events such as these were all indicated on Bill’s chart. Still somewhat a novice in the gun business myself, I didn’t fully appreciate why Bill was taking these great pains for a table of events. None of the other GE technicians ever did this. Bill told me he needed one more day to organize his tools and spares and he’d be ready to test.

We were joined at the firing range by Larry Brainard, a talented instrumentation technician. For our tests, Larry was testing out a new data collection system that used large reels of magnetic recording tape to store data. Larry had set up the system to record inputs from two transducers that were mounted to the gun bolt. One transducer would tell us the position of the bolt and the other would tell us bolt velocity during the time the bolt was cycling. Also new, was an ink pen plotter that printed out the data for us right at the test site.

After a few days of testing, I realized how valuable Bill was to our program. Each day before the testing started, Bill would review our results from the day before, present data and show trends that helped us decide what tests we would run that day. There was never a want at the test site. Spares, tools, lubrication, and cleaning equipment were always on hand, thanks to Bill. Bill requested that he be the only one to maintain the firing records. On these, he kept a meticulous accounting of the rounds loaded, rounds fired, and malfunctions that occurred. When there was a malfunction, Bill made careful note of where in the cycle it had occurred. He marked the fired case or the round damaged by the malfunction with the round number for later examination.

Typical Time-Displacement data from machine gun (Author)

Sometimes a part needed a minor modification—a small chamfer or a surface polished, for example. It was something we could do right at the range without returning to the factory. Whatever modification was done, Bill gave a complete explanation right in firing log. He often added a sketch to explain the change so that if it was determined to be helpful, it could be added to the drawing in order that future parts could be properly modified using the machine tools at the factory.

Bill, Larry, and I had a lot of fun with the new instrumentation. It was great to have the data presented immediately following the firing, so the effects of changes could be seen right away. The only drawback was the time it took us to figure out the velocity of the bolt at any given point in the cycle. This required determining at what time the event occurred using the time-displacement plot and then finding the bolt velocity at that same point in time using the time-velocity plot. There had to be a better way.

The three of us put our heads together and came up with a new approach. Since we had all the velocity and displacement data recorded, could we plot out the velocity with displacement and eliminate time altogether? We tried it and it worked! With Bill’s table of events in the gun cycle, we could tell exactly how fast the bolt was moving at every point in the cycle. The first time we saw it we were excited, but was this method really giving us accurate information? We noticed a curious dip in bolt velocity that occurred at the same point on every plot as the bolt was going forward. What was that? A quick look at Bill’s table of events chart and we knew the answer. The velocity dip corresponded exactly with the point where the bolt picked up a new round from the feed tray. At this point, a tab on the link firmly engaged the extractor groove on every round. In order to feed the round, the bolt had to overcome the grip of the tab on the extractor groove—hence the drop in velocity. During automatic fire we could watch the plotter pen go through the cycles and could see how consistent the velocity remained throughout the burst. Plotted data indicated we had an excessive amount of bolt bounce which would have to be addressed before we went into production. We ended up using these plots of velocity and displacement (we dubbed them VD curves) for every single barrel gun developed at GE thereafter.

I’ve worked with a lot of engineering technicians through the years. Most were very good, some were excellent, a few were Beeners and Chumwells, but in all of my years, there has only been one Bill Frigon.

This article first appeared in Small Arms Review V20N1 (January 2016)

Author

  • SAR Staff
    SAR Staff

    View all posts
Tags: 2016George E. Kontis PEJANUARY 2016Unsuccessful FirearmsV20N1
Previous Post

M27 Down Range Evaluation

Next Post

Innovations of Battle Arms Development

Next Post
Innovations of Battle Arms Development

Innovations of Battle Arms Development

TRENDING STORIES

  • VALKYRIE ARMAMENT BELT-FED CONVERSION

    VALKYRIE ARMAMENT BELT-FED CONVERSION

    0 shares
    Share 0 Tweet 0
  • EAST GERMAN WIEGER STG RIFLE

    0 shares
    Share 0 Tweet 0
  • The Complete Guide To Colt M-16 Models: Part I

    0 shares
    Share 0 Tweet 0
  • The Second Generation AR57: Drop-in 5.7 Upper For Your AR

    0 shares
    Share 0 Tweet 0
  • Forgotten M16A1 Rifle Manufacturers: GM/Hydra-Matic and Harrington & Richardson – Part I

    0 shares
    Share 0 Tweet 0

RECENT POSTS

SIG Sauer’s Full-Size Compact P365 “Fuse”

SIG Sauer’s Full-Size Compact P365 “Fuse”

June 27, 2024
The Importance of Offhand Shooting

The Importance of Offhand Shooting

June 25, 2024
BOOK REVIEW – The Collector’s Guide to the SKS

BOOK REVIEW – The Collector’s Guide to the SKS

June 20, 2024
True to Form: The Tisas 1911A1 ASF

True to Form: The Tisas 1911A1 ASF

June 18, 2024
Setting the Record Straight on the Fedorov Avtomat

Setting the Record Straight on the Fedorov Avtomat

June 6, 2024

QUICK LINKS

  • About Chipotle Publishing
  • About Small Arms Review
  • Advertise with Us
  • Write for Us

CONTACT DETAILS

  • Phone: +1 (702) 565-0746
  • E-mail: office@smallarmsreview.com
  • Web: www.chipotlepublishing.com
  • Chipotle Publishing, LLC 631 N. Stephanie St., No. 282, Henderson, NV 89014
Small Arms Review

FOLLOW US

  • Privacy Policy
  • Disclaimer

© 2022 Chipotle Publishing | All Rights Reserved

Welcome Back!

Login to your account below

Forgotten Password?

Retrieve your password

Please enter your username or email address to reset your password.

Log In

Add New Playlist



No Result
View All Result
  • Home
  • Articles
    • Guns & Parts
    • Suppressors
    • Optics & Thermals
    • Ammunition
    • Gear
    • News & Opinion
    • Columns
    • Museums & Factory Tours
    • ID Guides
    • Interviews
    • Event Coverage
    • Articles by Issue
      • Volume 1
      • Volume 2
      • Volume 3
      • Volume 4
      • Volume 5
      • Volume 6
      • Volume 7
      • Volume 8
      • Volume 9
      • Volume 10
      • Volume 11
      • Volume 12
      • Volume 13
      • Volume 14
      • Volume 15
      • Volume 16
      • Volume 17
      • Volume 18
      • Volume 19
      • Volume 20
      • Volume 21
      • Volume 22
      • Volume 23
      • Volume 24
  • The Archive
    • Search The Archive
  • Store
    • Books
    • Back Issues
    • Merchandise
  • Events
  • About
    • About Small Arms Review
    • About Chipotle Publishing
    • Contact Us
    • Other Publications
      • Small Arms Defense Journal

© 2022 Chipotle Publishing | All Rights Reserved

This website uses cookies. By continuing to use this website you are giving consent to cookies being used. Visit our Privacy and Cookie Policy.

Redirecting to External Website

You are leaving the Small Arms Review website and will be redirected to an external link in a 5 Seconds.
VISIT NOW!