Small Arms Review
  • Home
  • Articles
    • Guns & Parts
    • Suppressors
    • Optics & Thermals
    • Ammunition
    • Gear
    • News & Opinion
    • Columns
    • Museums & Factory Tours
    • ID Guides
    • Interviews
    • Event Coverage
    • Articles by Issue
      • Volume 1
        • V1N1 (Oct 1997)
        • V1N2 (Nov 1997)
        • V1N3 (Dec 1997)
        • V1N4 (Jan 1998)
        • V1N5 (Feb 1998)
        • V1N6 (Mar 1998)
        • V1N7 (Apr 1998)
        • V1N8 (May 1998)
        • V1N9 (Jun 1998)
        • V1N10 (Jul 1998)
        • V1N11 (Aug 1998)
        • V1N12 (Sep 1998)
      • Volume 2
        • V2N1 (Oct 1998)
        • V2N2 (Nov 1998)
        • V2N3 (Dec 1998)
        • V2N4 (Jan 1999)
        • V2N5 (Feb 1999)
        • V2N6 (Mar 1999)
        • V2N7 (Apr 1999)
        • V2N8 (May 1999)
        • V2N9 (Jun 1999)
        • V2N10 (Jul 1999)
        • V2N11 (Aug 1999)
        • V2N12 (Sep 1999)
      • Volume 3
        • V3N1 (Oct 1999)
        • V3N2 (Nov 1999)
        • V3N3 (Dec 1999)
        • V3N4 (Jan 2000)
        • V3N5 (Feb 2000)
        • V3N6 (Mar 2000)
        • V3N7 (Apr 2000)
        • V3N8 (May 2000)
        • V3N9 (Jun 2000)
        • V3N10 (Jul 2000)
        • V3N11 (Aug 2000)
        • V3N12 (Sep 2000)
      • Volume 4
        • V4N1 (Oct 2000)
        • V4N2 (Nov 2000)
        • V4N3 (Dec 2000)
        • V4N4 (Jan 2001)
        • V4N5 (Feb 2001)
        • V4N6 (Mar 2001)
        • V4N7 (Apr 2001)
        • V4N8 (May 2001)
        • V4N9 (Jun 2001)
        • V4N10 (Jul 2001)
        • V4N11 (Aug 2001)
        • V4N12 (Sep 2001)
      • Volume 5
        • V5N1 (Oct 2001)
        • V5N2 (Nov 2001)
        • V5N3 (Dec 2001)
        • V5N4 (Jan 2002)
        • V5N5 (Feb 2002)
        • V5N6 (Mar 2002)
        • V5N7 (Apr 2002)
        • V5N8 (May 2002)
        • V5N9 (Jun 2002)
        • V5N10 (Jul 2002)
        • V5N11 (Aug 2002)
        • V5N12 (Sep 2002)
      • Volume 6
        • V6N1 (Oct 2002)
        • V6N2 (Nov 2002)
        • V6N3 (Dec 2002)
        • V6N4 (Jan 2003)
        • V6N5 (Feb 2003)
        • V6N6 (Mar 2003)
        • V6N7 (Apr 2003)
        • V6N8 (May 2003)
        • V6N9 (Jun 2003)
        • V6N10 (Jul 2003)
        • V6N11 (Aug 2003)
        • V6N12 (Sep 2003)
      • Volume 7
        • V7N1 (Oct 2003)
        • V7N2 (Nov 2003)
        • V7N3 (Dec 2003)
        • V7N4 (Jan 2004)
        • V7N5 (Feb 2004)
        • V7N6 (Mar 2004)
        • V7N7 (Apr 2004)
        • V7N8 (May 2004)
        • V7N9 (Jun 2004)
        • V7N10 (Jul 2004)
        • V7N11 (Aug 2004)
        • V7N12 (Sep 2004)
      • Volume 8
        • V8N1 (Oct 2004)
        • V8N2 (Nov 2004)
        • V8N3 (Dec 2004)
        • V8N4 (Jan 2005)
        • V8N5 (Feb 2005)
        • V8N6 (Mar 2005)
        • V8N7 (Apr 2005)
        • V8N8 (May 2005)
        • V8N9 (Jun 2005)
        • V8N10 (Jul 2005)
        • V8N11 (Aug 2005)
        • V8N12 (Sep 2005)
      • Volume 9
        • V9N1 (Oct 2005)
        • V9N2 (Nov 2005)
        • V9N3 (Dec 2005)
        • V9N4 (Jan 2006)
        • V9N5 (Feb 2006)
        • V9N6 (Mar 2006)
        • V9N7 (Apr 2006)
        • V9N8 (May 2006)
        • V9N9 (Jun 2006)
        • V9N10 (Jul 2006)
        • V9N11 (Aug 2006)
        • V9N12 (Sep 2006)
      • Volume 10
        • V10N1 (Oct 2006)
        • V10N2 (Nov 2006)
        • V10N3 (Dec 2006)
        • V10N4 (Jan 2007)
        • V10N5 (Feb 2007)
        • V10N6 (Mar 2007)
        • V10N7 (Apr 2007)
        • V10N8 (May 2007)
        • V10N9 (Jun 2007)
        • V10N10 (Jul 2007)
        • V10N11 (Aug 2007)
        • V10N12 (Sep 2007)
      • Volume 11
        • V11N1 (Oct 2007)
        • V11N2 (Nov 2007)
        • V11N3 (Dec 2007)
        • V11N4 (Jan 2008)
        • V11N5 (Feb 2008)
        • V11N6 (Mar 2008)
        • V11N7 (Apr 2008)
        • V11N8 (May 2008)
        • V11N9 (Jun 2008)
        • V11N10 (Jul 2008)
        • V11N11 (Aug 2008)
        • V11N12 (Sep 2008)
      • Volume 12
        • V12N1 (Oct 2008)
        • V12N2 (Nov 2008)
        • V12N3 (Dec 2008)
        • V12N4 (Jan 2009)
        • V12N5 (Feb 2009)
        • V12N6 (Mar 2009)
        • V12N7 (Apr 2009)
        • V12N8 (May 2009)
        • V12N9 (Jun 2009)
        • V12N10 (Jul 2009)
        • V12N11 (Aug 2009)
        • V12N12 (Sep 2009)
      • Volume 13
        • V13N1 (Oct 2009)
        • V13N2 (Nov 2009)
        • V13N3 (Dec 2009)
        • V13N4 (Jan 2010)
        • V13N5 (Feb 2010)
        • V13N6 (Mar 2010)
        • V13N7 (Apr 2010)
        • V13N8 (May 2010)
        • V13N9 (Jun 2010)
        • V13N10 (Jul 2010)
        • V13N11 (Aug 2010)
        • V13N12 (Sep 2010)
      • Volume 14
        • V14N1 (Oct 2010)
        • V14N2 (Nov 2010)
        • V14N3 (Dec 2010)
          • Ammunition
        • V14N4 (Jan 2011)
        • V14N5 (Feb 2011)
        • V14N6 (Mar 2011)
        • V14N7 (Apr 2011)
        • V14N8 (May 2011)
        • V14N9 (Jun 2011)
        • V14N10 (Jul 2011)
        • V14N11 (Aug 2011)
        • V14N12 (Sep 2011)
      • Volume 15
        • V15N1 (Oct 2011)
        • V15N2 (Nov 2011)
        • V15N4 (Jan 2012)
        • V15N5 (Feb 2012)
      • Volume 16
        • V16N1 (1st Quarter 2012)
        • V16N2 (2nd Quarter 2012)
        • V16N3 (3rd Quarter 2012)
        • V16N4 (4th Quarter 2012)
      • Volume 17
        • V17N1 (1st Quarter 2013)
        • V17N2 (2nd Quarter 2013)
        • V17N3 (3rd Quarter 2013)
        • V17N4 (4th Quarter 2013)
      • Volume 18
        • V18N1 (Jan Feb 2014)
        • V18N2 (Mar Apr 2014)
        • V18N3 (May Jun 2014)
        • V18N4 (Jul Aug 2014)
        • V18N5 (Sep Oct 2014)
        • V18N6 (Nov Dec 2014)
      • Volume 19
        • V19N1 (Jan 2015)
        • V19N2 (Feb Mar 2015)
        • V19N3 (Apr 2015)
        • V19N4 (May 2015)
        • V19N5 (Jun 2015)
        • V19N6 (Jul 2015)
        • V19N7 (Aug Sep 2015)
        • V19N8 (Oct 2015)
        • V19N9 (Nov 2015)
        • V19N10 (Dec 2015)
      • Volume 20
        • V20N1 (Jan 2016)
        • V20N2 (Feb Mar 2016)
        • V20N3 (Apr 2016)
        • V20N4 (May 2016)
        • V20N5 (Jun 2016)
        • V20N6 (Jul 2016)
        • V20N7 (Aug Sep 2016)
        • V20N8 (Oct 2016)
        • V20N9 (Nov 2016)
        • V20N10 (Dec 2016)
      • Volume 21
        • V21N1 (Jan 2017)
        • V21N2 (Feb Mar 2017)
        • V21N3 (Apr 2017)
        • V21N4 (May 2017)
        • V21N5 (Jun 2017)
        • V21N6 (Jul 2017)
        • V21N7 (Aug Sep 2017)
        • V21N8 (Oct 2017)
        • V21N9 (Nov 2017)
        • V21N10 (Dec 2017)
      • Volume 22
        • V22N1 (Jan 2018)
        • V22N2 (Feb 2018)
        • V22N3 (March 2018)
        • V22N4 (Apr 2018)
        • V22N5 (May 2018)
        • V22N6 (Jun Jul 2018)
        • V22N7 (Aug Sep 2018)
        • V22N8 (Oct 2018)
        • V22N9 (Nov 2018)
        • V22N10 (Dec 2018)
      • Volume 23
        • V23N1 (Jan 2019)
        • V23N2 (Feb 2019)
        • V23N3 (Mar 2019)
        • V23N4 (Apr 2019)
        • V23N5 (May 2019)
        • V23N6 (Jun Jul 2019)
        • V23N7 (Aug Sep 2019)
        • V23N8 (Oct 2019)
        • V23N9 (Nov 2019)
        • V23N10 (Dec 2019)
      • Volume 24
        • V24N1 (Jan 2020)
        • V24N2 (Feb 2020)
        • V24N3 (Mar 2020)
        • V24N4 (Apr 2020)
        • V24N5 (May 2020)
        • V24N6 (Jun Jul 2020)
        • V24N7 (Aug Sep 2020)
        • V24N8 (Oct 2020)
        • V24N9 (Nov 2020)
        • V24N10 (Dec 2020)
  • The Archive
    • Search The Archive
  • Store
    • Books
    • Back Issues
    • Merchandise
  • Events
  • About
    • About Small Arms Review
    • About Chipotle Publishing
    • Contact Us
    • Other Publications
      • Small Arms Defense Journal
  • Home
  • Articles
    • Guns & Parts
    • Suppressors
    • Optics & Thermals
    • Ammunition
    • Gear
    • News & Opinion
    • Columns
    • Museums & Factory Tours
    • ID Guides
    • Interviews
    • Event Coverage
    • Articles by Issue
      • Volume 1
        • V1N1 (Oct 1997)
        • V1N2 (Nov 1997)
        • V1N3 (Dec 1997)
        • V1N4 (Jan 1998)
        • V1N5 (Feb 1998)
        • V1N6 (Mar 1998)
        • V1N7 (Apr 1998)
        • V1N8 (May 1998)
        • V1N9 (Jun 1998)
        • V1N10 (Jul 1998)
        • V1N11 (Aug 1998)
        • V1N12 (Sep 1998)
      • Volume 2
        • V2N1 (Oct 1998)
        • V2N2 (Nov 1998)
        • V2N3 (Dec 1998)
        • V2N4 (Jan 1999)
        • V2N5 (Feb 1999)
        • V2N6 (Mar 1999)
        • V2N7 (Apr 1999)
        • V2N8 (May 1999)
        • V2N9 (Jun 1999)
        • V2N10 (Jul 1999)
        • V2N11 (Aug 1999)
        • V2N12 (Sep 1999)
      • Volume 3
        • V3N1 (Oct 1999)
        • V3N2 (Nov 1999)
        • V3N3 (Dec 1999)
        • V3N4 (Jan 2000)
        • V3N5 (Feb 2000)
        • V3N6 (Mar 2000)
        • V3N7 (Apr 2000)
        • V3N8 (May 2000)
        • V3N9 (Jun 2000)
        • V3N10 (Jul 2000)
        • V3N11 (Aug 2000)
        • V3N12 (Sep 2000)
      • Volume 4
        • V4N1 (Oct 2000)
        • V4N2 (Nov 2000)
        • V4N3 (Dec 2000)
        • V4N4 (Jan 2001)
        • V4N5 (Feb 2001)
        • V4N6 (Mar 2001)
        • V4N7 (Apr 2001)
        • V4N8 (May 2001)
        • V4N9 (Jun 2001)
        • V4N10 (Jul 2001)
        • V4N11 (Aug 2001)
        • V4N12 (Sep 2001)
      • Volume 5
        • V5N1 (Oct 2001)
        • V5N2 (Nov 2001)
        • V5N3 (Dec 2001)
        • V5N4 (Jan 2002)
        • V5N5 (Feb 2002)
        • V5N6 (Mar 2002)
        • V5N7 (Apr 2002)
        • V5N8 (May 2002)
        • V5N9 (Jun 2002)
        • V5N10 (Jul 2002)
        • V5N11 (Aug 2002)
        • V5N12 (Sep 2002)
      • Volume 6
        • V6N1 (Oct 2002)
        • V6N2 (Nov 2002)
        • V6N3 (Dec 2002)
        • V6N4 (Jan 2003)
        • V6N5 (Feb 2003)
        • V6N6 (Mar 2003)
        • V6N7 (Apr 2003)
        • V6N8 (May 2003)
        • V6N9 (Jun 2003)
        • V6N10 (Jul 2003)
        • V6N11 (Aug 2003)
        • V6N12 (Sep 2003)
      • Volume 7
        • V7N1 (Oct 2003)
        • V7N2 (Nov 2003)
        • V7N3 (Dec 2003)
        • V7N4 (Jan 2004)
        • V7N5 (Feb 2004)
        • V7N6 (Mar 2004)
        • V7N7 (Apr 2004)
        • V7N8 (May 2004)
        • V7N9 (Jun 2004)
        • V7N10 (Jul 2004)
        • V7N11 (Aug 2004)
        • V7N12 (Sep 2004)
      • Volume 8
        • V8N1 (Oct 2004)
        • V8N2 (Nov 2004)
        • V8N3 (Dec 2004)
        • V8N4 (Jan 2005)
        • V8N5 (Feb 2005)
        • V8N6 (Mar 2005)
        • V8N7 (Apr 2005)
        • V8N8 (May 2005)
        • V8N9 (Jun 2005)
        • V8N10 (Jul 2005)
        • V8N11 (Aug 2005)
        • V8N12 (Sep 2005)
      • Volume 9
        • V9N1 (Oct 2005)
        • V9N2 (Nov 2005)
        • V9N3 (Dec 2005)
        • V9N4 (Jan 2006)
        • V9N5 (Feb 2006)
        • V9N6 (Mar 2006)
        • V9N7 (Apr 2006)
        • V9N8 (May 2006)
        • V9N9 (Jun 2006)
        • V9N10 (Jul 2006)
        • V9N11 (Aug 2006)
        • V9N12 (Sep 2006)
      • Volume 10
        • V10N1 (Oct 2006)
        • V10N2 (Nov 2006)
        • V10N3 (Dec 2006)
        • V10N4 (Jan 2007)
        • V10N5 (Feb 2007)
        • V10N6 (Mar 2007)
        • V10N7 (Apr 2007)
        • V10N8 (May 2007)
        • V10N9 (Jun 2007)
        • V10N10 (Jul 2007)
        • V10N11 (Aug 2007)
        • V10N12 (Sep 2007)
      • Volume 11
        • V11N1 (Oct 2007)
        • V11N2 (Nov 2007)
        • V11N3 (Dec 2007)
        • V11N4 (Jan 2008)
        • V11N5 (Feb 2008)
        • V11N6 (Mar 2008)
        • V11N7 (Apr 2008)
        • V11N8 (May 2008)
        • V11N9 (Jun 2008)
        • V11N10 (Jul 2008)
        • V11N11 (Aug 2008)
        • V11N12 (Sep 2008)
      • Volume 12
        • V12N1 (Oct 2008)
        • V12N2 (Nov 2008)
        • V12N3 (Dec 2008)
        • V12N4 (Jan 2009)
        • V12N5 (Feb 2009)
        • V12N6 (Mar 2009)
        • V12N7 (Apr 2009)
        • V12N8 (May 2009)
        • V12N9 (Jun 2009)
        • V12N10 (Jul 2009)
        • V12N11 (Aug 2009)
        • V12N12 (Sep 2009)
      • Volume 13
        • V13N1 (Oct 2009)
        • V13N2 (Nov 2009)
        • V13N3 (Dec 2009)
        • V13N4 (Jan 2010)
        • V13N5 (Feb 2010)
        • V13N6 (Mar 2010)
        • V13N7 (Apr 2010)
        • V13N8 (May 2010)
        • V13N9 (Jun 2010)
        • V13N10 (Jul 2010)
        • V13N11 (Aug 2010)
        • V13N12 (Sep 2010)
      • Volume 14
        • V14N1 (Oct 2010)
        • V14N2 (Nov 2010)
        • V14N3 (Dec 2010)
          • Ammunition
        • V14N4 (Jan 2011)
        • V14N5 (Feb 2011)
        • V14N6 (Mar 2011)
        • V14N7 (Apr 2011)
        • V14N8 (May 2011)
        • V14N9 (Jun 2011)
        • V14N10 (Jul 2011)
        • V14N11 (Aug 2011)
        • V14N12 (Sep 2011)
      • Volume 15
        • V15N1 (Oct 2011)
        • V15N2 (Nov 2011)
        • V15N4 (Jan 2012)
        • V15N5 (Feb 2012)
      • Volume 16
        • V16N1 (1st Quarter 2012)
        • V16N2 (2nd Quarter 2012)
        • V16N3 (3rd Quarter 2012)
        • V16N4 (4th Quarter 2012)
      • Volume 17
        • V17N1 (1st Quarter 2013)
        • V17N2 (2nd Quarter 2013)
        • V17N3 (3rd Quarter 2013)
        • V17N4 (4th Quarter 2013)
      • Volume 18
        • V18N1 (Jan Feb 2014)
        • V18N2 (Mar Apr 2014)
        • V18N3 (May Jun 2014)
        • V18N4 (Jul Aug 2014)
        • V18N5 (Sep Oct 2014)
        • V18N6 (Nov Dec 2014)
      • Volume 19
        • V19N1 (Jan 2015)
        • V19N2 (Feb Mar 2015)
        • V19N3 (Apr 2015)
        • V19N4 (May 2015)
        • V19N5 (Jun 2015)
        • V19N6 (Jul 2015)
        • V19N7 (Aug Sep 2015)
        • V19N8 (Oct 2015)
        • V19N9 (Nov 2015)
        • V19N10 (Dec 2015)
      • Volume 20
        • V20N1 (Jan 2016)
        • V20N2 (Feb Mar 2016)
        • V20N3 (Apr 2016)
        • V20N4 (May 2016)
        • V20N5 (Jun 2016)
        • V20N6 (Jul 2016)
        • V20N7 (Aug Sep 2016)
        • V20N8 (Oct 2016)
        • V20N9 (Nov 2016)
        • V20N10 (Dec 2016)
      • Volume 21
        • V21N1 (Jan 2017)
        • V21N2 (Feb Mar 2017)
        • V21N3 (Apr 2017)
        • V21N4 (May 2017)
        • V21N5 (Jun 2017)
        • V21N6 (Jul 2017)
        • V21N7 (Aug Sep 2017)
        • V21N8 (Oct 2017)
        • V21N9 (Nov 2017)
        • V21N10 (Dec 2017)
      • Volume 22
        • V22N1 (Jan 2018)
        • V22N2 (Feb 2018)
        • V22N3 (March 2018)
        • V22N4 (Apr 2018)
        • V22N5 (May 2018)
        • V22N6 (Jun Jul 2018)
        • V22N7 (Aug Sep 2018)
        • V22N8 (Oct 2018)
        • V22N9 (Nov 2018)
        • V22N10 (Dec 2018)
      • Volume 23
        • V23N1 (Jan 2019)
        • V23N2 (Feb 2019)
        • V23N3 (Mar 2019)
        • V23N4 (Apr 2019)
        • V23N5 (May 2019)
        • V23N6 (Jun Jul 2019)
        • V23N7 (Aug Sep 2019)
        • V23N8 (Oct 2019)
        • V23N9 (Nov 2019)
        • V23N10 (Dec 2019)
      • Volume 24
        • V24N1 (Jan 2020)
        • V24N2 (Feb 2020)
        • V24N3 (Mar 2020)
        • V24N4 (Apr 2020)
        • V24N5 (May 2020)
        • V24N6 (Jun Jul 2020)
        • V24N7 (Aug Sep 2020)
        • V24N8 (Oct 2020)
        • V24N9 (Nov 2020)
        • V24N10 (Dec 2020)
  • The Archive
    • Search The Archive
  • Store
    • Books
    • Back Issues
    • Merchandise
  • Events
  • About
    • About Small Arms Review
    • About Chipotle Publishing
    • Contact Us
    • Other Publications
      • Small Arms Defense Journal


No Result
View All Result
Small Arms Review


No Result
View All Result
Home Firearm History

MK19 History & the State of the Art of Grenade Machine Guns

by Dan Shea
January 26, 2023
in Firearm History, ID Guides
US Ordnance MK19 Mod 3

US Ordnance MK19 Mod 3 on M3 Tripod with MK93 cradle and a 32-round can of 40x53mm “gold cups,” linked and ready to go.

Share on FacebookShare on Twitter

By Dan Shea

We at SADJ wanted to cover the history of U.S. grenade machine guns, and with a recent visit to US Ordnance, the prime manufacturer of the MK19 Mod 3, it seemed like a perfect time. Later in this article, we’ll cover the modern MK19 system and improvements in depth. But first, a look at where we’ve come from...

Grenade Machine Gun
MK19 Mod 3 grenade machine gun at the range on an M3 tripod with target practice solid blue tip ammunition lined up for firing.

Throwing grenades is nothing new. Reports of tossing explosives at enemies go back to the dark ages and certainly many armies had “grenadiers” in the 1700s and 1800s; light the fuse, toss the grenade. It wasn’t until mechanical fuses and primer firing were evolved that the idea of launching grenades automatically occurred. There are many early patents for weapons designed to launch explosive devices, but until the 1950s, the U.S. didn’t take the idea too seriously. With the advent of the 40x46mm grenade and its legendary M79 launcher, wheels started turning in the minds of designers and soldiers alike. Evolution of the single shot launchers has been covered in-depth by SADJ in the past; it is the idea of the U.S. designed, belt-fed, quickly repeating launchers that is our subject.

A proper timeline would be in two lines; the 40x46mm low velocity rounds, and the 40x53mm high velocity rounds. LV rounds have a range of 350-400 meters and can be shoulder fired or fired in a vehicle-mounted full-auto launcher, the HV rounds can go out to 2200 meters and are not for shoulder fired launchers.

Approximate Milestones for 40×46 Low Velocity Development:

1950s: Development of the 40x46mm low velocity grenade, and M79 launcher.
1965: Development and deployment of the MK18 Mod 0 crank fired launcher.
1968-71: Development and deployment of the MK20 Mod 0 automatic launcher.
1968: Development and deployment of various XM174E2 launchers.
1968: Development and deployment of the dual caliber M129 helicopter gun.

Approximate Milestones for 40×53 High Velocity Development:

1964: Final evolution of the 40x53mm high velocity grenade.
1966: MK19 Mod 0 design at Naval Ordnance Station, Louisville.
1969-74: Development of the Hughes XM175 series of launchers.
1968: Deployment of the first MK19 Mod 0 to Vietnam.
1971: Deployment of the first MK19 Mod 1 to Vietnam.
1974: Development of the MK19 Mod 2, not fielded.
1970s (Approximate): 600 MK19 Mod 2 Aluminum receiver guns- Israel.
1984-1989: Final development and manufacture of the MK19 Mod 3 by Saco Defense, then 1990s General Dynamics, and currently US Ordnance.

The XM172, also known as MK18 Mod 0.

“The Honeywell Gun,” variously called the XM172, or the MK18 Mod 0, this was a crank fired belt fed, with 40x46mm ammunition; the same ammunition used in the M203/M79/M320 system. The ammunition is pre-loaded into a tape that holds the case in line with the barrel. Two rounds were fired per full revolution of the belt, allowing for slow, ranging fire, or firing up to about 250 rounds per minute. Belts were 24- or 48-round lengths. This was into action in about 1965 and survived in various places for U.S. forces (Navy) in Vietnam, primarily on “PBRs” (patrol boat, river) although some use on Chinook helicopters working over landing zone perimeters was seen.

MK18 Mod 0 with the cover open.

MK18 Mod 0 with the cover open, showing the lower rotor with a round in position, and the upper rotor inside the cover. The two rotors are keyed together so that when the top cover is down, each rotor makes half of the chamber. Since it is Hi-Low pressure, low velocity, the round can be fired like this, and much like a revolver, the projectile must enter a separate barrel. The rounds were initially held in a metallic tape, since they didn’t need to be extracted, the tape simply came through with empty cartridge cases in it. This was later changed to a reloadable Mylar backed fabric which, for many, doubled as a grenadier’s belt for the M79 shooters.

The MK20 Mod 0.

Around 1966, the Navy wanted a better system than hand-cranking. Colonel George M. Chinn, author of the famous five-volume series of books “The Machine Gun” was involved. His team at Naval Ordnance Station in Louisville, Kentucky was simultaneously involved in designing an automatic grenade launcher to replace the crank-fired MK18 and, by 1967, the team had the boxlike MK20 Mod 0 in 40x46mm, and was preparing for the new MK19 system in 40x53mm.

The MK20 is an unusual design, the cocking handle is pushed forward, and the barrel moves forward and stays “cocked.” On pushing the trigger, the barrel springs to the rear, over the grenade, pushing it onto the firing pin and the barrel moves forward with the projectile moving forward in its bore. The cycle repeats as long as the trigger is depressed. Production was ended in 1971, when Chinn’s group was advancing the MK19 system.

The MK19 Mod 0.

The MK19 Mod 0 was fielded, at first, in 1968 in small numbers in Vietnam, and was an unreliable system. It utilized the newly designed 40x53mm round, and fired from an “open bolt” but using ‘advance primer ignition’. This means the firing pin struck the primer before the cartridge was fully seated and in battery. The Mod 1 debuted as in this example in 1971 and, by 1974, it was evident that there were reliability issues and a “Mod 2” was designed but not implemented. These were all done by Colonel Chinn’s team at the Naval Ordnance Station in Louisville, Kentucky.

The MK19 Mod 0 was fielded, at first, in 1968 in small numbers in Vietnam, and was an unreliable system.
The MK19 Mod 2.

There was, in fact, a production of the Mod 2. The MK19 Mod 2 Israeli contract gun in 40x53mm with an aluminum receiver. Approximately 600 were made. There’s no clear historical evidence pointing to the location of actual manufacture; at Naval Ordnance, or as a technical data package exported to Israel, perhaps with parts for assembly abroad.

In any event, these functioned but were not advanced into larger production and the MK19 Mod 3 replaced them in service. The Israeli Mod 2s were sold on the surplus market, and the parts were initially offered as “MK19 Mod 3” replacement parts in the mid-2000s, but of course none of the parts interchanged with the Mod 3 guns. Some steel receivers were made and project guns tested in the U.S. by a variety of smaller manufacturers, but there was a clear size and parts difference with the issue MK19 Mod 3. Today, it appears these parts are offered as “MK19 Mod 2.5” complete guns in a modern production, new receiver program. Not to discourage potential end users, but these are not compatible with the MK19 Mod 3 system, which is physically larger and does not interchange parts. It would be inadvisable to mix the systems and support, so if the Mod 2.5 is chosen, it should be supported on its own and verification of spare parts supply should be done.

A MK19 Mod 3 stripped receiver, showing that, in comparison, it is about 25% larger than the MK19 Mod 2 Israeli aluminum receiver gun that is behind it. This will be the same difference with the Mod 0, Mod 1, and Mod 2.5 guns.
The M129 grenade launcher.

M129: This is a unique electrically operated system that had a cam path in the receiver housing, but instead of the bolt traveling in that path like a Gatling or an M134, the barrel reciprocated. The barrel would start in the forward position, and when fired would cam back over the round, fire it, then move forward for extraction. These were mounted in chin pods on the front of many Huey gunships in Vietnam as well as other rotary winged aircraft. It replaced the very similar M75 system which had accuracy issues, among other problems. The M129 could fire either 40x46mm or 40x53mm grenades, depending on how the feed was set up.

The XM174E2 as shown on this operator’s manual.

The XM174E2 was a drum fed 40x46mm automatic gun on tripod that was made in very small quantity in the late 1960s by Aerojet Ordnance & Manufacturing Company. These made a shadowy appearance in Vietnam: Colonel David Lutz, USMC ret’d, told this author once of how he’d found two of these XM174E2s with drum feeds at a base armory and took them to his area of operations in the A Shau valley. He and his men were quite impressed with the accuracy and firepower in fighting the Vietcong and NVA, and wanted more of them. As Colonel Lutz (Lt. Lutz at the time) stated it “Then, adult supervision showed up, demanded to know where we had gotten these, and took them away in that time-honored military tradition of if it works well, you can’t have it.”

XM175AL
XM175ST

In the late 1960s and early 1970s, there were two versions of the M175 40x53mm grenade machine gun; first was the XM175AL (above, left) which had a milled, rounded receiver, and the second version XM175ST (above, right) had a boxlike sheet metal receiver. Hughes Gun Systems in Culver City, California was the design group and manufacturer. Both were open bolt firing, link-belt fed, could be converted to be right- or left-feed, and did not require external power like the M129. The M175 was designed initially for ground vehicle use, and then the vision changed for it to become a manually operated helicopter door gun.

More on the MK19 in the Modern Day….

In the 1980s, FNMI in South Carolina was awarded the contracts for the M16A2, the M249 SAW, the M240G, and the MK19 Mod 3, all at the same time. Chief Engineer George Kontis described the situation, “We knew we could not properly perform all four of the contracts simultaneously, and the contracting officer did as well, and offered our choice of three—leave one behind. After a full review, I determined that the MK19 Mod 3 TDP and learning curve would be the hardest, so FNMI withdrew from the MK19.”

Saco Defense was awarded the contract for MK19 Mod 3, and it took almost six years to develop the TDP and production process on the especially difficult receiver and bolt production. We visited the Saco facility numerous times during this period and tested the weapon in many of the phases of production along with the M6E4 program run by Marc Desrochers. Kevin Sullivan of today’s Nostromo company was project manager in the mid to later MK19 program success. Saco was bought out by General Dynamics, and the GD MK19 Mod 3 production was in full delivery for many years. Several other companies have tried to go into production, but the advantage goes to larger companies, and indeed the U.S. DoD wanted a secondary manufacturer capability during the Iraq and Afghanistan wars; ATK was awarded this, with FN Manufacturing as a subcontractor on the receivers and bolt bodies.

In the 1990s, I was involved in importation of special tripods and mounts from Vinghog of Norway for my USG customers. At that time, the accepted first burst hit probability at 1000 meters for the MK19 Mod 3 on M3 tripod with fixed cradle was approximately 53%. In our testing for U.S. government agencies, we ascertained that the HK GMG had a much higher first burst hit probability, and much of that advantage was in the tripod and soft mount as well as a good sighting system. (GMG testing for this author started in 1993 and continued through the Yuma Proving Ground tests in 1996-97. It’s a fine GMG but not the subject of this article).  

The customers wanted to retrofit their MK19s to gain similar accuracy. With the addition of the special Norwegian soft mount, the Adjustable Sight Mounting Bracket and some rudimentary head’s up sights with 40mm gradients, we brought the MK19 Mod 3 reliability to about 85% for first burst at 1000m. My point? The MK19 Mod 3 is an excellent grenade machine gun that needs mount stability and proper sighting. The advancements since that time have been by leaps and bounds, with the ability to land short bursts at long ranges increasing exponentially.

The MWO

There is a program that came out of the accuracy testing that was done. In June of 2002, a five-year plan was adopted for the MK19 Mod 3s in the U.S. Army system. MWO 9-1010-230-50-1 was implemented with an expected completion date of June 2007. However, that was only in the U.S. Army and later USMC/USN inventories; there are still tens of thousands of MK19 Mod 3 around the world that need this upgrade.

The purpose of this particular modification work order (MWO) is to convert the MK19 Mod 3 Grenade Machine Gun, to the MK19 Mod 3 with Adjustable Sight Mounting Bracket. Maintenance time is reduced and there is now a structural mounting point for fire control devices. The previous “sight mount” was a half-step, providing a not very secure rail base to the existing rear sight body. With this new purpose-designed mounting base, a variety of enhanced sighting devices can finally be used. The modification kit has the trapezoidal mounting base & screws, along with directions, and, for the armory, a fixture for drilling. This MWO was used as a vehicle to provide some upgrading of other parts, in particular the firing pin, firing pin sear, cam cocking, cocking lever and an adjustable secondary drive lever. 

US Ordnance has the contracts for the M60E4 (the Navy SEALs’ MK43), the US M2A1 .50 caliber, as well as M240 series and other M2 guns. After several years of research and prototyping, then going into production, US Ordnance perfected their MK19 Mod 3 manufacturing procedures. They had also inherited one of the original technical data packages (TDPs) that came from Colonel Chinn, and benefitted from employees who worked the original Saco and General Dynamics programs. In their arrangements with General Dynamics and the U.S. government, US Ordnance contracted to be the manufacturer of the MK19 Mod 3 grenade machine gun. They are the official U.S. government contractor for this system, as well as for foreign military sales (FMS) and sales to allied buyers. SADJ toured the manufacturing facility recently, and with the new U.S. government contract to supply all MK19 Mod 3 and repair parts, US Ordnance is preparing for a full mil-spec live-fire test, which we will participate in and bring the report to our readers. There is a complete upgrade program that should be available to most longtime users of the MK19 Mod 3 system. Rather, it is available, but many end users are not aware of it. I have participated in several over the years, but US Ordnance is the primary on this type of project. They can gauge your existing guns, recommend the upgrades, perform them in the factory or set up on site programs. This will not work on the MK19 Mod 1, Mod 2, or the “Mod 2.5” as can be seen in the history of the development, they are different guns from the most prolific and reliable Mod 3. Contrary to some advertising and “internet wizards,” the parts of those other models do not interchange with the MK19 Mod 3 40mm Grenade Machine Gun, and it is our sincere hope that this guide will help identify what systems are in place, and how to upgrade, repair, and maintain them.

General Dynamics Armament and Technical Products produces the MK19 air-cooled weapon system, a blowback-operated, belt-fed, crew-served 40mm grenade machine gun. This shows a MK19 Mod 3 receiver that has had the upgrades installed in it. Note the trapezoidal plate that is the new sight mounting bracket.
One of a variety of MK19 40mm adjustable rear sight mounts. This version slides over the new mounting bracket and provides several mounting options for laser rangefinders and sighting systems.
A MK19 40mm Adjustable Rear Sight Mount mounted on the new MWO directed mounting bracket.

Meanwhile, in the USSR…

The AGS-17 30x29mm Grenade Machine Gun.

While the U.S. was developing the 40x46mm and 40x53mm grenade machine guns, the Soviets were designing, as well. In 1965 the AGS concept was born and by 1971, production had begun. The AGS-17 30x29mm Grenade Machine Gun is a lightweight, tripod or vehicle mounted open bolt grenade launcher. It’s quite effective, and the smaller diameter, longer grenades have an almost spear-like travel to target. However, at 1700 meters range the time to target is very long, due to the high trajectory arc. Typically, the AGS is drum fed with 29 linked rounds per drum. SADJ has covered these extensively in the past and the analysis can be found at our websites.

Belts of VOG-17 30x29mm ammunition lined up for test firing at the Sloboda Factory Range in Serbia.

Grenade Launcher Ammunition

Grenades, left to right: Russian VOG-25, a caseless grenade that is front loaded into the GP25/GP30/GP34 series underbarrel launchers, as well as several “Gucci” launchers like the Bulgarian six barreled “Avalanche.” Range is about 350-400 meters, the same as the M203 rounds; 40x46mm M203/M79/M320 round, note the case is shorter than the case to its right; 40x53mm MK19 grenade; VOG-17 30x29mm grenade for the AGS-17, with its longer, thinner profile.
The three main contenders on the Hi-Low pressure grenade launcher system, left to right: the 40x46mm HE Fragmentation Hi-Low pressure, low velocity cutaway round, the 40x53mm Hi-Low pressure, high velocity cutaway round, and the VOG-25 40mm “caseless” grenade.

40x46mm HE Fragmentation Hi-Low pressure, low velocity cutaway round for the M203/M79/M320 type launchers. The multiple fuses are in the front, the fragmentation ball is in the center (without energetics), and the base shows how the Hi-Low pressure system works. The primer is fired, igniting propellant in the central chamber which expands. When it reaches X pressure, it blows out through the vent holes into the sides into a much larger expansion chamber, creating a lower pressure that “pushes” the grenade into the barrel and downrange. Range is 350-400 meters.

At center is the 40x53mm Hi-Low pressure, high velocity cutaway round for the MK19/GMG and other Grenade Machine Gun systems, it is evident from the thick walls of the spherical chamber that there is much more pressure involved here. The cartridge case is 9mm longer than the 40×46 low velocity (M203) round, and the 40x53mm round cannot be chambered in the shoulder fired launchers. Range is out to 2200 meters, depending on firing platform.

Right is the VOG-25 40mm grenade, a “caseless” round that is front loaded into the barrel of the GP-25/30/34 underbarrel launchers. When the primer is struck, it ignites the propellant in the chamber at the very bottom, the expanding propellant gasses vent out into the base of the launcher forming the secondary low-pressure chamber and drive the grenade down the bore and downrange. There is no cartridge case left, it has all left the launcher downrange. Range is 350-400 meters.

Tags: 40mmGrenade LaunchergrenadesMK18Mk19
Previous Post

Galil’s Evolution: IWI’s Israeli Micro Assault Rifle

Next Post

The Sight Seers: A Look Around the Aimpoint Factory in Malmo, Sweden

Next Post
The Sight Seers: A Look Around the Aimpoint Factory in Malmo, Sweden

The Sight Seers: A Look Around the Aimpoint Factory in Malmo, Sweden

TRENDING STORIES

  • VALKYRIE ARMAMENT BELT-FED CONVERSION

    VALKYRIE ARMAMENT BELT-FED CONVERSION

    0 shares
    Share 0 Tweet 0
  • The Complete Guide To Colt M-16 Models: Part I

    0 shares
    Share 0 Tweet 0
  • The Second Generation AR57: Drop-in 5.7 Upper For Your AR

    0 shares
    Share 0 Tweet 0
  • Forgotten M16A1 Rifle Manufacturers: GM/Hydra-Matic and Harrington & Richardson – Part I

    0 shares
    Share 0 Tweet 0
  • EAST GERMAN WIEGER STG RIFLE

    0 shares
    Share 0 Tweet 0

RECENT POSTS

SIG Sauer’s Full-Size Compact P365 “Fuse”

SIG Sauer’s Full-Size Compact P365 “Fuse”

June 27, 2024
The Importance of Offhand Shooting

The Importance of Offhand Shooting

June 25, 2024
BOOK REVIEW – The Collector’s Guide to the SKS

BOOK REVIEW – The Collector’s Guide to the SKS

June 20, 2024
True to Form: The Tisas 1911A1 ASF

True to Form: The Tisas 1911A1 ASF

June 18, 2024
Setting the Record Straight on the Fedorov Avtomat

Setting the Record Straight on the Fedorov Avtomat

June 6, 2024

QUICK LINKS

  • About Chipotle Publishing
  • About Small Arms Review
  • Advertise with Us
  • Write for Us

CONTACT DETAILS

  • Phone: +1 (702) 565-0746
  • E-mail: office@smallarmsreview.com
  • Web: www.chipotlepublishing.com
  • Chipotle Publishing, LLC 631 N. Stephanie St., No. 282, Henderson, NV 89014
Small Arms Review

FOLLOW US

  • Privacy Policy
  • Disclaimer

© 2022 Chipotle Publishing | All Rights Reserved

Welcome Back!

Login to your account below

Forgotten Password?

Retrieve your password

Please enter your username or email address to reset your password.

Log In

Add New Playlist



No Result
View All Result
  • Home
  • Articles
    • Guns & Parts
    • Suppressors
    • Optics & Thermals
    • Ammunition
    • Gear
    • News & Opinion
    • Columns
    • Museums & Factory Tours
    • ID Guides
    • Interviews
    • Event Coverage
    • Articles by Issue
      • Volume 1
      • Volume 2
      • Volume 3
      • Volume 4
      • Volume 5
      • Volume 6
      • Volume 7
      • Volume 8
      • Volume 9
      • Volume 10
      • Volume 11
      • Volume 12
      • Volume 13
      • Volume 14
      • Volume 15
      • Volume 16
      • Volume 17
      • Volume 18
      • Volume 19
      • Volume 20
      • Volume 21
      • Volume 22
      • Volume 23
      • Volume 24
  • The Archive
    • Search The Archive
  • Store
    • Books
    • Back Issues
    • Merchandise
  • Events
  • About
    • About Small Arms Review
    • About Chipotle Publishing
    • Contact Us
    • Other Publications
      • Small Arms Defense Journal

© 2022 Chipotle Publishing | All Rights Reserved

This website uses cookies. By continuing to use this website you are giving consent to cookies being used. Visit our Privacy and Cookie Policy.

Redirecting to External Website

You are leaving the Small Arms Review website and will be redirected to an external link in a 5 Seconds.
VISIT NOW!