Small Arms Review
  • Home
  • Articles
    • Guns & Parts
    • Suppressors
    • Optics & Thermals
    • Ammunition
    • Gear
    • News & Opinion
    • Columns
    • Museums & Factory Tours
    • ID Guides
    • Interviews
    • Event Coverage
    • Articles by Issue
      • Volume 1
        • V1N1 (Oct 1997)
        • V1N2 (Nov 1997)
        • V1N3 (Dec 1997)
        • V1N4 (Jan 1998)
        • V1N5 (Feb 1998)
        • V1N6 (Mar 1998)
        • V1N7 (Apr 1998)
        • V1N8 (May 1998)
        • V1N9 (Jun 1998)
        • V1N10 (Jul 1998)
        • V1N11 (Aug 1998)
        • V1N12 (Sep 1998)
      • Volume 2
        • V2N1 (Oct 1998)
        • V2N2 (Nov 1998)
        • V2N3 (Dec 1998)
        • V2N4 (Jan 1999)
        • V2N5 (Feb 1999)
        • V2N6 (Mar 1999)
        • V2N7 (Apr 1999)
        • V2N8 (May 1999)
        • V2N9 (Jun 1999)
        • V2N10 (Jul 1999)
        • V2N11 (Aug 1999)
        • V2N12 (Sep 1999)
      • Volume 3
        • V3N1 (Oct 1999)
        • V3N2 (Nov 1999)
        • V3N3 (Dec 1999)
        • V3N4 (Jan 2000)
        • V3N5 (Feb 2000)
        • V3N6 (Mar 2000)
        • V3N7 (Apr 2000)
        • V3N8 (May 2000)
        • V3N9 (Jun 2000)
        • V3N10 (Jul 2000)
        • V3N11 (Aug 2000)
        • V3N12 (Sep 2000)
      • Volume 4
        • V4N1 (Oct 2000)
        • V4N2 (Nov 2000)
        • V4N3 (Dec 2000)
        • V4N4 (Jan 2001)
        • V4N5 (Feb 2001)
        • V4N6 (Mar 2001)
        • V4N7 (Apr 2001)
        • V4N8 (May 2001)
        • V4N9 (Jun 2001)
        • V4N10 (Jul 2001)
        • V4N11 (Aug 2001)
        • V4N12 (Sep 2001)
      • Volume 5
        • V5N1 (Oct 2001)
        • V5N2 (Nov 2001)
        • V5N3 (Dec 2001)
        • V5N4 (Jan 2002)
        • V5N5 (Feb 2002)
        • V5N6 (Mar 2002)
        • V5N7 (Apr 2002)
        • V5N8 (May 2002)
        • V5N9 (Jun 2002)
        • V5N10 (Jul 2002)
        • V5N11 (Aug 2002)
        • V5N12 (Sep 2002)
      • Volume 6
        • V6N1 (Oct 2002)
        • V6N2 (Nov 2002)
        • V6N3 (Dec 2002)
        • V6N4 (Jan 2003)
        • V6N5 (Feb 2003)
        • V6N6 (Mar 2003)
        • V6N7 (Apr 2003)
        • V6N8 (May 2003)
        • V6N9 (Jun 2003)
        • V6N10 (Jul 2003)
        • V6N11 (Aug 2003)
        • V6N12 (Sep 2003)
      • Volume 7
        • V7N1 (Oct 2003)
        • V7N2 (Nov 2003)
        • V7N3 (Dec 2003)
        • V7N4 (Jan 2004)
        • V7N5 (Feb 2004)
        • V7N6 (Mar 2004)
        • V7N7 (Apr 2004)
        • V7N8 (May 2004)
        • V7N9 (Jun 2004)
        • V7N10 (Jul 2004)
        • V7N11 (Aug 2004)
        • V7N12 (Sep 2004)
      • Volume 8
        • V8N1 (Oct 2004)
        • V8N2 (Nov 2004)
        • V8N3 (Dec 2004)
        • V8N4 (Jan 2005)
        • V8N5 (Feb 2005)
        • V8N6 (Mar 2005)
        • V8N7 (Apr 2005)
        • V8N8 (May 2005)
        • V8N9 (Jun 2005)
        • V8N10 (Jul 2005)
        • V8N11 (Aug 2005)
        • V8N12 (Sep 2005)
      • Volume 9
        • V9N1 (Oct 2005)
        • V9N2 (Nov 2005)
        • V9N3 (Dec 2005)
        • V9N4 (Jan 2006)
        • V9N5 (Feb 2006)
        • V9N6 (Mar 2006)
        • V9N7 (Apr 2006)
        • V9N8 (May 2006)
        • V9N9 (Jun 2006)
        • V9N10 (Jul 2006)
        • V9N11 (Aug 2006)
        • V9N12 (Sep 2006)
      • Volume 10
        • V10N1 (Oct 2006)
        • V10N2 (Nov 2006)
        • V10N3 (Dec 2006)
        • V10N4 (Jan 2007)
        • V10N5 (Feb 2007)
        • V10N6 (Mar 2007)
        • V10N7 (Apr 2007)
        • V10N8 (May 2007)
        • V10N9 (Jun 2007)
        • V10N10 (Jul 2007)
        • V10N11 (Aug 2007)
        • V10N12 (Sep 2007)
      • Volume 11
        • V11N1 (Oct 2007)
        • V11N2 (Nov 2007)
        • V11N3 (Dec 2007)
        • V11N4 (Jan 2008)
        • V11N5 (Feb 2008)
        • V11N6 (Mar 2008)
        • V11N7 (Apr 2008)
        • V11N8 (May 2008)
        • V11N9 (Jun 2008)
        • V11N10 (Jul 2008)
        • V11N11 (Aug 2008)
        • V11N12 (Sep 2008)
      • Volume 12
        • V12N1 (Oct 2008)
        • V12N2 (Nov 2008)
        • V12N3 (Dec 2008)
        • V12N4 (Jan 2009)
        • V12N5 (Feb 2009)
        • V12N6 (Mar 2009)
        • V12N7 (Apr 2009)
        • V12N8 (May 2009)
        • V12N9 (Jun 2009)
        • V12N10 (Jul 2009)
        • V12N11 (Aug 2009)
        • V12N12 (Sep 2009)
      • Volume 13
        • V13N1 (Oct 2009)
        • V13N2 (Nov 2009)
        • V13N3 (Dec 2009)
        • V13N4 (Jan 2010)
        • V13N5 (Feb 2010)
        • V13N6 (Mar 2010)
        • V13N7 (Apr 2010)
        • V13N8 (May 2010)
        • V13N9 (Jun 2010)
        • V13N10 (Jul 2010)
        • V13N11 (Aug 2010)
        • V13N12 (Sep 2010)
      • Volume 14
        • V14N1 (Oct 2010)
        • V14N2 (Nov 2010)
        • V14N3 (Dec 2010)
          • Ammunition
        • V14N4 (Jan 2011)
        • V14N5 (Feb 2011)
        • V14N6 (Mar 2011)
        • V14N7 (Apr 2011)
        • V14N8 (May 2011)
        • V14N9 (Jun 2011)
        • V14N10 (Jul 2011)
        • V14N11 (Aug 2011)
        • V14N12 (Sep 2011)
      • Volume 15
        • V15N1 (Oct 2011)
        • V15N2 (Nov 2011)
        • V15N4 (Jan 2012)
        • V15N5 (Feb 2012)
      • Volume 16
        • V16N1 (1st Quarter 2012)
        • V16N2 (2nd Quarter 2012)
        • V16N3 (3rd Quarter 2012)
        • V16N4 (4th Quarter 2012)
      • Volume 17
        • V17N1 (1st Quarter 2013)
        • V17N2 (2nd Quarter 2013)
        • V17N3 (3rd Quarter 2013)
        • V17N4 (4th Quarter 2013)
      • Volume 18
        • V18N1 (Jan Feb 2014)
        • V18N2 (Mar Apr 2014)
        • V18N3 (May Jun 2014)
        • V18N4 (Jul Aug 2014)
        • V18N5 (Sep Oct 2014)
        • V18N6 (Nov Dec 2014)
      • Volume 19
        • V19N1 (Jan 2015)
        • V19N2 (Feb Mar 2015)
        • V19N3 (Apr 2015)
        • V19N4 (May 2015)
        • V19N5 (Jun 2015)
        • V19N6 (Jul 2015)
        • V19N7 (Aug Sep 2015)
        • V19N8 (Oct 2015)
        • V19N9 (Nov 2015)
        • V19N10 (Dec 2015)
      • Volume 20
        • V20N1 (Jan 2016)
        • V20N2 (Feb Mar 2016)
        • V20N3 (Apr 2016)
        • V20N4 (May 2016)
        • V20N5 (Jun 2016)
        • V20N6 (Jul 2016)
        • V20N7 (Aug Sep 2016)
        • V20N8 (Oct 2016)
        • V20N9 (Nov 2016)
        • V20N10 (Dec 2016)
      • Volume 21
        • V21N1 (Jan 2017)
        • V21N2 (Feb Mar 2017)
        • V21N3 (Apr 2017)
        • V21N4 (May 2017)
        • V21N5 (Jun 2017)
        • V21N6 (Jul 2017)
        • V21N7 (Aug Sep 2017)
        • V21N8 (Oct 2017)
        • V21N9 (Nov 2017)
        • V21N10 (Dec 2017)
      • Volume 22
        • V22N1 (Jan 2018)
        • V22N2 (Feb 2018)
        • V22N3 (March 2018)
        • V22N4 (Apr 2018)
        • V22N5 (May 2018)
        • V22N6 (Jun Jul 2018)
        • V22N7 (Aug Sep 2018)
        • V22N8 (Oct 2018)
        • V22N9 (Nov 2018)
        • V22N10 (Dec 2018)
      • Volume 23
        • V23N1 (Jan 2019)
        • V23N2 (Feb 2019)
        • V23N3 (Mar 2019)
        • V23N4 (Apr 2019)
        • V23N5 (May 2019)
        • V23N6 (Jun Jul 2019)
        • V23N7 (Aug Sep 2019)
        • V23N8 (Oct 2019)
        • V23N9 (Nov 2019)
        • V23N10 (Dec 2019)
      • Volume 24
        • V24N1 (Jan 2020)
        • V24N2 (Feb 2020)
        • V24N3 (Mar 2020)
        • V24N4 (Apr 2020)
        • V24N5 (May 2020)
        • V24N6 (Jun Jul 2020)
        • V24N7 (Aug Sep 2020)
        • V24N8 (Oct 2020)
        • V24N9 (Nov 2020)
        • V24N10 (Dec 2020)
  • The Archive
    • Search The Archive
  • Store
    • Books
    • Back Issues
    • Merchandise
  • Podcast
  • Newsletter
  • Events
  • FrankenGun Challenge
  • About
    • About Small Arms Review
    • About Chipotle Publishing
    • Contact Us
    • Other Publications
      • Small Arms Defense Journal
  • Home
  • Articles
    • Guns & Parts
    • Suppressors
    • Optics & Thermals
    • Ammunition
    • Gear
    • News & Opinion
    • Columns
    • Museums & Factory Tours
    • ID Guides
    • Interviews
    • Event Coverage
    • Articles by Issue
      • Volume 1
        • V1N1 (Oct 1997)
        • V1N2 (Nov 1997)
        • V1N3 (Dec 1997)
        • V1N4 (Jan 1998)
        • V1N5 (Feb 1998)
        • V1N6 (Mar 1998)
        • V1N7 (Apr 1998)
        • V1N8 (May 1998)
        • V1N9 (Jun 1998)
        • V1N10 (Jul 1998)
        • V1N11 (Aug 1998)
        • V1N12 (Sep 1998)
      • Volume 2
        • V2N1 (Oct 1998)
        • V2N2 (Nov 1998)
        • V2N3 (Dec 1998)
        • V2N4 (Jan 1999)
        • V2N5 (Feb 1999)
        • V2N6 (Mar 1999)
        • V2N7 (Apr 1999)
        • V2N8 (May 1999)
        • V2N9 (Jun 1999)
        • V2N10 (Jul 1999)
        • V2N11 (Aug 1999)
        • V2N12 (Sep 1999)
      • Volume 3
        • V3N1 (Oct 1999)
        • V3N2 (Nov 1999)
        • V3N3 (Dec 1999)
        • V3N4 (Jan 2000)
        • V3N5 (Feb 2000)
        • V3N6 (Mar 2000)
        • V3N7 (Apr 2000)
        • V3N8 (May 2000)
        • V3N9 (Jun 2000)
        • V3N10 (Jul 2000)
        • V3N11 (Aug 2000)
        • V3N12 (Sep 2000)
      • Volume 4
        • V4N1 (Oct 2000)
        • V4N2 (Nov 2000)
        • V4N3 (Dec 2000)
        • V4N4 (Jan 2001)
        • V4N5 (Feb 2001)
        • V4N6 (Mar 2001)
        • V4N7 (Apr 2001)
        • V4N8 (May 2001)
        • V4N9 (Jun 2001)
        • V4N10 (Jul 2001)
        • V4N11 (Aug 2001)
        • V4N12 (Sep 2001)
      • Volume 5
        • V5N1 (Oct 2001)
        • V5N2 (Nov 2001)
        • V5N3 (Dec 2001)
        • V5N4 (Jan 2002)
        • V5N5 (Feb 2002)
        • V5N6 (Mar 2002)
        • V5N7 (Apr 2002)
        • V5N8 (May 2002)
        • V5N9 (Jun 2002)
        • V5N10 (Jul 2002)
        • V5N11 (Aug 2002)
        • V5N12 (Sep 2002)
      • Volume 6
        • V6N1 (Oct 2002)
        • V6N2 (Nov 2002)
        • V6N3 (Dec 2002)
        • V6N4 (Jan 2003)
        • V6N5 (Feb 2003)
        • V6N6 (Mar 2003)
        • V6N7 (Apr 2003)
        • V6N8 (May 2003)
        • V6N9 (Jun 2003)
        • V6N10 (Jul 2003)
        • V6N11 (Aug 2003)
        • V6N12 (Sep 2003)
      • Volume 7
        • V7N1 (Oct 2003)
        • V7N2 (Nov 2003)
        • V7N3 (Dec 2003)
        • V7N4 (Jan 2004)
        • V7N5 (Feb 2004)
        • V7N6 (Mar 2004)
        • V7N7 (Apr 2004)
        • V7N8 (May 2004)
        • V7N9 (Jun 2004)
        • V7N10 (Jul 2004)
        • V7N11 (Aug 2004)
        • V7N12 (Sep 2004)
      • Volume 8
        • V8N1 (Oct 2004)
        • V8N2 (Nov 2004)
        • V8N3 (Dec 2004)
        • V8N4 (Jan 2005)
        • V8N5 (Feb 2005)
        • V8N6 (Mar 2005)
        • V8N7 (Apr 2005)
        • V8N8 (May 2005)
        • V8N9 (Jun 2005)
        • V8N10 (Jul 2005)
        • V8N11 (Aug 2005)
        • V8N12 (Sep 2005)
      • Volume 9
        • V9N1 (Oct 2005)
        • V9N2 (Nov 2005)
        • V9N3 (Dec 2005)
        • V9N4 (Jan 2006)
        • V9N5 (Feb 2006)
        • V9N6 (Mar 2006)
        • V9N7 (Apr 2006)
        • V9N8 (May 2006)
        • V9N9 (Jun 2006)
        • V9N10 (Jul 2006)
        • V9N11 (Aug 2006)
        • V9N12 (Sep 2006)
      • Volume 10
        • V10N1 (Oct 2006)
        • V10N2 (Nov 2006)
        • V10N3 (Dec 2006)
        • V10N4 (Jan 2007)
        • V10N5 (Feb 2007)
        • V10N6 (Mar 2007)
        • V10N7 (Apr 2007)
        • V10N8 (May 2007)
        • V10N9 (Jun 2007)
        • V10N10 (Jul 2007)
        • V10N11 (Aug 2007)
        • V10N12 (Sep 2007)
      • Volume 11
        • V11N1 (Oct 2007)
        • V11N2 (Nov 2007)
        • V11N3 (Dec 2007)
        • V11N4 (Jan 2008)
        • V11N5 (Feb 2008)
        • V11N6 (Mar 2008)
        • V11N7 (Apr 2008)
        • V11N8 (May 2008)
        • V11N9 (Jun 2008)
        • V11N10 (Jul 2008)
        • V11N11 (Aug 2008)
        • V11N12 (Sep 2008)
      • Volume 12
        • V12N1 (Oct 2008)
        • V12N2 (Nov 2008)
        • V12N3 (Dec 2008)
        • V12N4 (Jan 2009)
        • V12N5 (Feb 2009)
        • V12N6 (Mar 2009)
        • V12N7 (Apr 2009)
        • V12N8 (May 2009)
        • V12N9 (Jun 2009)
        • V12N10 (Jul 2009)
        • V12N11 (Aug 2009)
        • V12N12 (Sep 2009)
      • Volume 13
        • V13N1 (Oct 2009)
        • V13N2 (Nov 2009)
        • V13N3 (Dec 2009)
        • V13N4 (Jan 2010)
        • V13N5 (Feb 2010)
        • V13N6 (Mar 2010)
        • V13N7 (Apr 2010)
        • V13N8 (May 2010)
        • V13N9 (Jun 2010)
        • V13N10 (Jul 2010)
        • V13N11 (Aug 2010)
        • V13N12 (Sep 2010)
      • Volume 14
        • V14N1 (Oct 2010)
        • V14N2 (Nov 2010)
        • V14N3 (Dec 2010)
          • Ammunition
        • V14N4 (Jan 2011)
        • V14N5 (Feb 2011)
        • V14N6 (Mar 2011)
        • V14N7 (Apr 2011)
        • V14N8 (May 2011)
        • V14N9 (Jun 2011)
        • V14N10 (Jul 2011)
        • V14N11 (Aug 2011)
        • V14N12 (Sep 2011)
      • Volume 15
        • V15N1 (Oct 2011)
        • V15N2 (Nov 2011)
        • V15N4 (Jan 2012)
        • V15N5 (Feb 2012)
      • Volume 16
        • V16N1 (1st Quarter 2012)
        • V16N2 (2nd Quarter 2012)
        • V16N3 (3rd Quarter 2012)
        • V16N4 (4th Quarter 2012)
      • Volume 17
        • V17N1 (1st Quarter 2013)
        • V17N2 (2nd Quarter 2013)
        • V17N3 (3rd Quarter 2013)
        • V17N4 (4th Quarter 2013)
      • Volume 18
        • V18N1 (Jan Feb 2014)
        • V18N2 (Mar Apr 2014)
        • V18N3 (May Jun 2014)
        • V18N4 (Jul Aug 2014)
        • V18N5 (Sep Oct 2014)
        • V18N6 (Nov Dec 2014)
      • Volume 19
        • V19N1 (Jan 2015)
        • V19N2 (Feb Mar 2015)
        • V19N3 (Apr 2015)
        • V19N4 (May 2015)
        • V19N5 (Jun 2015)
        • V19N6 (Jul 2015)
        • V19N7 (Aug Sep 2015)
        • V19N8 (Oct 2015)
        • V19N9 (Nov 2015)
        • V19N10 (Dec 2015)
      • Volume 20
        • V20N1 (Jan 2016)
        • V20N2 (Feb Mar 2016)
        • V20N3 (Apr 2016)
        • V20N4 (May 2016)
        • V20N5 (Jun 2016)
        • V20N6 (Jul 2016)
        • V20N7 (Aug Sep 2016)
        • V20N8 (Oct 2016)
        • V20N9 (Nov 2016)
        • V20N10 (Dec 2016)
      • Volume 21
        • V21N1 (Jan 2017)
        • V21N2 (Feb Mar 2017)
        • V21N3 (Apr 2017)
        • V21N4 (May 2017)
        • V21N5 (Jun 2017)
        • V21N6 (Jul 2017)
        • V21N7 (Aug Sep 2017)
        • V21N8 (Oct 2017)
        • V21N9 (Nov 2017)
        • V21N10 (Dec 2017)
      • Volume 22
        • V22N1 (Jan 2018)
        • V22N2 (Feb 2018)
        • V22N3 (March 2018)
        • V22N4 (Apr 2018)
        • V22N5 (May 2018)
        • V22N6 (Jun Jul 2018)
        • V22N7 (Aug Sep 2018)
        • V22N8 (Oct 2018)
        • V22N9 (Nov 2018)
        • V22N10 (Dec 2018)
      • Volume 23
        • V23N1 (Jan 2019)
        • V23N2 (Feb 2019)
        • V23N3 (Mar 2019)
        • V23N4 (Apr 2019)
        • V23N5 (May 2019)
        • V23N6 (Jun Jul 2019)
        • V23N7 (Aug Sep 2019)
        • V23N8 (Oct 2019)
        • V23N9 (Nov 2019)
        • V23N10 (Dec 2019)
      • Volume 24
        • V24N1 (Jan 2020)
        • V24N2 (Feb 2020)
        • V24N3 (Mar 2020)
        • V24N4 (Apr 2020)
        • V24N5 (May 2020)
        • V24N6 (Jun Jul 2020)
        • V24N7 (Aug Sep 2020)
        • V24N8 (Oct 2020)
        • V24N9 (Nov 2020)
        • V24N10 (Dec 2020)
  • The Archive
    • Search The Archive
  • Store
    • Books
    • Back Issues
    • Merchandise
  • Podcast
  • Newsletter
  • Events
  • FrankenGun Challenge
  • About
    • About Small Arms Review
    • About Chipotle Publishing
    • Contact Us
    • Other Publications
      • Small Arms Defense Journal
No Result
View All Result
Small Arms Review
No Result
View All Result
Home Articles

The YHM Model 57 Billet Carbine

SAR Staff by SAR Staff
March 18, 2021
in Articles, Articles by Issue, Guns & Parts, Search by Issue, V19N6 (Jul 2015), Volume 19
The YHM Model 57 Billet Carbine
Share on FacebookShare on Twitter

The YHM Model 57 is produced in both flat black as well as burnt bronze. Notice this model has a longer extended handguard, which is also an option to the customer.

By Christopher R. Bartocci

The AR business, like any other, has trends that alter the way the weapons are produced to make a more modern updated looking carbine instead of the legacy AR look going back to the early 1960s. Many companies have created unique looking receivers with a much more modern look such as AXTS, San Tan Tactical, Seekins Precision and now the Yankee Hill Machine Model 57. Providing to numerous OEM’s as well as manufacturers of their own weapons is Yankee Hill Machine Co., Inc. of Florence, Massachusetts. Opening their doors in 1951 as a job shop, Yankee Hill Machine (YHM) broke into the gun world in the late 1960s in the form of a government contract making cleaning kits. Around 1998, YHM started to sell complete AR-type rifles in co-op with ZM Weapons. The co-op dissolved and DPMS is now its own company. YHM has manufactured several weapon components for the U.S. military as well making them familiar with military grade quality control.

Shown is the early machining of the lower receiver from the billet of 7075 T6 aluminum. Notice a billet is a rectangular chunk of aluminum rather than a pre formed forging. This enables the billet to be sculptured into just about anything without restriction compared to that of a forging. (Courtesy of YHM)

YHM manufactures a wide variety of components including rifle receivers, back up sights, front sights, rail systems, flash suppressors, lower receiver accessories as well as sound suppressors. They have a very good size selection of complete rifles ranging from entry level to professional. Along with their complete rifle line, they also sell complete upper receivers whether they are stock items or custom items. YHM has earned their reputation in this industry for quality and innovation. One does not have to look very far to see other manufacturers using YHM parts.

The newest entry to the market is the Model 57. To start with, the upper and lower receiver is manufactured from a billet instead of a forging. There are several reasons why this is a benefit over the forging. With a forging, there is very little that can be done to alter the look of the receiver without alteration of the forging die. Another big factor is when there is a buying surge of rifles and components forgings can be very hard to come by. Here in the U.S., there are relatively few forging companies that manufacture for the entire industry. These include Cardinal Forge, Anchor Harvey, Cerro Forge, Martin Marietta and Brass Aluminum Forgings, to mention a few. Many of these have U.S. government contracts with Colt and FN. In some cases receiver forgings that are rejected by those companies find their way into the commercial market as well. Basically, these are standard lower and flat top upper receiver forgings. YHM found during the frenzy of 2012 they had difficulty getting forgings. They wanted to be sure they could build rifles whether there were forgings or not.

he left side of the YHM Model 57. Notice the modern sculptured billet upper and lower receiver and the YHM slant muzzle brake/compensator and Hexmag.

Using a billet instead of a forging offers a starting point to allow the manufacturer to sculpture any design they like with the only limitations being the length and the width of the billet. Billets are also much easier to manufacture. The original YHM design arguably mimicked a forged lower (concept design started in January 2013). YHM started to make sure all of their specifications would match any upper throughout the industry. Although the design of their first six prototypes had a very unique look to them, it was too similar to that of a legacy lower so YHM decided on a course in a different direction. At this same time, the YHM engineering department had greatly increased in capability and innovation. YHM knew they could do vastly more with the lower with this new engineering approach as well as improve machining practices. Two more concepts later, YHM arrived with the current Model 57. Once the lower was completed, YHM decided on a whole package. Once this was decided, the YHM engineering team was challenged to come up with an entirely new rifle to show at SHOT Show 2014. By October 2013, YHM had their new billet upper receiver as well.

The YHM Model 57. Notice the Magpul CTR stock, YHM Specter handguard, YHM folding backup sights as well as the Hexmag.

The Model 57 rifle has an unloaded weight of 7.43 pounds without a magazine. With the stock extended the overall length is 37.5 inches and with it closed is 33.5 inches. The rifle comes with two Magpul Gen 2 PMags and YHM Quick Deploy Q.D.S. sights, which are manufactured from 7075 T6 aircraft grade aluminum. The Model 57 can be purchased in 5.56mm, 300 AAC Blackout (7.62x35mm) and 6.8mm SPC calibers. Finishes are offered in flat black and burnt bronze. The MSRP is $2,195 for the flat black model.

Starting from the rear of the Model 57, the rifle uses a Magpul Commercial Specification CTR stock that is lightweight, durable and has a lock on the stock so it will not inadvertently move without intent. The receiver extension allows the stock six different positions.

The pistol grip is the Magpul MOE or Magpul Original Equipment. This is far more comfortable than the standard Mil-Spec A2 pistol grip and up more of the user’s hand.

Detail view of the receivers of the YHM Model 57 that have a unique look to them. Notice the shape of the trigger guard, the magazine well, the Magpul MOE pistol grip, YHM backup sight and the Hexmag.

The lower receiver is manufactured from a 7075 T6 aircraft grade aluminum billet, the same type of aluminum as the Mil-Spec forgings. The trigger guard is integral into the lower receiver and is oversized to allow for heavy gloves. The magazine well is cut in a unique shape and appears as though the front of the magazine well extends a little more than a standard legacy rifle. During testing of the T&E rifle it was found two magazines would not seat due to this. These were the H&K polymer magazine and the newly introduced Elite Tactical Systems translucent polymer magazines. This bears no reflection on the rifle; these magazines were designed a little different is all. The front of the magazine well has grooves machined into it making it easier and a more solid hold. The rear takedown and front pivot pins are the YHM designed E-Z Pull takedown pins that protrude from the right side of the rifle making field stripping of the rifle considerably easier and faster. The trigger is a two stage trigger that broke at 5 pounds

The upper receiver, also machined from a billet of 7075 T6 aircraft grade aluminum has a very unique sculptured look to it. Machined into the receiver is a forward assist as well as a fired cartridge case deflector. The ejection port has written on the outside the caliber and in the case of the T&E it said “5.56mm NATO.” All YHM firearms now include a caliber marked ejection port dust cover.

The YHM Model 57 comes with a very nice quality 2-stage competition trigger.

The barrel on the T&E rifle is a YHM manufactured 16 inch fluted barrel manufactured from 4140 steel and Melonite QPQ finished. The barrel is referred to as a ball cut barrel and is patterned in such a way so that although material is removed, it retains its original tensile strength. The rifle is offered with a carbine gas system. There are four different barrels offered by YHM: a standard 5.56mm Mil-Spec 1 turn in 7 inch barrel, a 5.56mm barrel with a 1 turn in 9 inch barrel, a 300 AAC Blackout/300 Whisper barrel with a 1 turn in 8 inch twist barrel to accommodate both super and subsonic loads, and a 1 turn in 10 inch 6.8mm SPC barrel. YHM’s ball cut barrel is at this time only available on complete Model 57 rifles. YHM offers both threaded and unthreaded muzzles as well.

The muzzle device was quite interesting called the YHM Slant Series Brake/Comp – a combination of a muzzle brake and compensator. The particular one on the rifle was the YHM-26-MB-A, which can also be bought separately for a MSRP of $70. This device stood out during testing as it did not have the brutal blast on the sides as you would come to expect from a muzzle brake and you could clearly feel it doing its job. Muzzle jump was negligible and although very uniquely and somewhat freaky looking, this muzzle device does an excellent job.

Notice the excellent EZ-Pull rear takedown pin and front pivot pin. This makes field stripping much easier to accomplish particularly when these pins are tight.

The handguard is the SLR (Slim, Light, Rail)-Slant Series handguard. The top of the rail makes a continuous top rail from the charging handle to the tip of the handguard at the muzzle end. The rail is T-marked so the operator will know the proper placement of the optics or other accessories to maintain zero. This rail is manufactured from 6061-T6 aluminum and is available in midlength as well as rifle length configurations. The rail on the T&E rifle is the midlength (YHM-5145), which has three QD mounts on the front left and right sides and the underside of the handguard. The rail is continuous on the top but the sides and bottom are only 3 inches in length on the front of the handguard. To the rear is smooth and very comfortable to hold. The 12 o’clock position of the handguard accepts customizable Mil-Std 1913 rails. The handguard is 2.18 inches wide and 2.18 inches tall. The handguard does require a proprietary barrel nut. All the necessary components and tools are provided with the handguard for installation. The handguard on the submitted T&E is their Specter Systems – a term coined by YHM that refers to a free floating handguard that extends over/past the gas system/gas block hiding it under the handguard. This also protects the gas system from any damage from the rifle being dropped or any other type of impact.

The YHM Slant Series Muzzle Brake/Compensator (YHM-26-MB-A) proved to be quite effective and was excellent at stopping muzzle climb but not brutal on the ears.

The rifle comes standard with the YHM Q.D.S. (Quick Deploy Sights) front and rear sights (YHM-5040). These folding backup sights feature a spring loaded automatic deploy system and lock positively in the upright and folded positions. They deploy by a spring loaded button and stow the same way. Both sights are manufactured from 6060-T6 aircraft grade aluminum. The rear sight has the same short and long range dual aperture as the standard A4/M4 rifles and windage is adjusted by a knob. No tools are necessary.

The bolt carrier group is standard Mil-Spec. The carrier group was very well machined and melonite coated. The charging handle has the new YHM tactical latch on it that makes it much easier to manipulate with gloved hands.

The charging handle includes the Tac Latch.

At the same time the new Model 57 arrived, so did some new magazines for testing manufactured by Hexmag. Product design of the Hexmag began in early 2013. Hexmag was incorporated in November of 2013 and began shipping product in March of 2014. The design was done by Adam Schefter, one of the company’s owners.

The material is very similar to other top end magazines that are made of a mix of nylon and fiber materials for strength. The magazine has a series of hexagram shapes on the magazine exterior. According to Hexmag, the grip is the number one benefit and they feel the design was more interesting to look at compared to what else is out there saying the pattern compliments the design and not distracts. The pattern saves on weight and they estimate the weight savings as two 5.56mm rounds per magazine.

Hexmag offers several colors to identify ammunition caliber, type of ammunition or whatever the customer may prefer. The magazine body is available in flat dark earth or olive drab.

Another outstanding feature of this product is the colored follower and the colored lock plate. The base plate has a hexagram shaped hole where the lock plate protrudes and locks the floor plate and magazine base together. No tool is needed to disassemble the magazine. One can use their finger to push inward on the lock plate and slide the floor plate off the magazine body. Both the follower and lock plate are offered in black, orange, green, red, yellow, pink and blue. By changing the color of the lock plate to various colors, this can help the shooter to identify caliber of the cartridges in the magazine as well as projectile types. The magazine itself is offered in black, Flat Dark Earth and olive green.

The market can expect other types of magazines in the future. Hexmag offers a Lifetime Warranty on their magazines. Prior to release, the magazines had been put through a battery of testing including drop testing and compatibility testing. The T&E magazines were subjected to different rifles as well as fully automatic fire.

The newly introduced Hexmag. Notice the hexagonal pattern on the magazine as well as the orange follower and the hexagram shaped orange lock plate on the floor plate of the magazine.

The YHM Model 57 was tested with numerous magazines to determine compatibility. These magazines included GI aluminum, Magpul PMag, HK High Reliability steel magazine, Hera Arms polymer mag, Lancer AWM, Surefire 60-round and the new Hexmag. These all functioned without issue. The rifle was tested for function with 500 rounds of Black Hills Ammunition .223 Rem 55gr FMJ as well as Federal American Eagle .223 Rem 55gr FMJ. There were no malfunctions. The efficiency of the muzzle brake/compensator was quite noticeable on affecting muzzle jump. The feel of the handguard was quite comfortable. It was nice not having the rail at the rear of the handguard due to how uncomfortable that can be. The Magpul MOE pistol grip is always a winner. The best group shot that day was a .740 inch group by a SWAT Team sniper with Black Hills Ammunition MK262 Mod1 ammunition. This is a 77gr Open Tip Match Round used by SOCOM. It is this authors opinion this is the finest factory produced 5.56mm cartridge in the world. You get a combination of match accuracy and consistent wounding ballistics. Designed by Jeff Hoffman, this round has become the most sought after 5.56mm round in the military as well as foreign military who have had the chance to shoot it with their SOCOM advisors. Black Hills Ammunition makes this ammunition available to the commercial and LE markets as the 5.56mm 77gr OTM in their new manufactured ammunition line.

Specter Length SLR-Slant (YHM-5145) handguard. This is a very well made handguard that does not have rail on it where you don’t want it and is very comfortable to hold. Also notice the YHM folding front sight assembly.

With all the variations of the Black Rifle you may be thinking, “Not another one!” This is not your typical copy of the M4 carbine – in fact it is the opposite. This rifle sports a new style upper and lower receiver, new free float handguard, excellent fluted barrel, advanced muzzle brake/compensator and more. The only thing this author would have liked to see different is that the gas block to be drilled and pinned in place instead of locked on with set screws.

This article first appeared in Small Arms Review V19N6 (July 2015)

Author

  • SAR Staff
    SAR Staff

    View all posts

Tags: 2015Billet CarbineChristopher R. BartocciJULY 2015model 57V19N6YHM
Previous Post

Aftermarket Sten Magazines

Next Post

Book Review: V19N6

Next Post
Book Reviews: October 2000

Book Review: V19N6

TRENDING STORIES

  • U.S. NAVY MK18 MOD O CUSTOM CLOSE QUARTER COMBAT WEAPON FOR THE SEAFARING SERVICE

    U.S. NAVY MK18 MOD O CUSTOM CLOSE QUARTER COMBAT WEAPON FOR THE SEAFARING SERVICE

    0 shares
    Share 0 Tweet 0
  • Recreational Use Of 40MM Grenade Launchers

    0 shares
    Share 0 Tweet 0
  • Customizing the Already Custom SIG P320 Spectre Comp

    0 shares
    Share 0 Tweet 0
  • Col. Rex Applegate: The Knife Designs of a Close-Combat Legend

    0 shares
    Share 0 Tweet 0
  • Evolution of the U.S. Grenade Launcher From World War II to Today’s Conflicts

    0 shares
    Share 0 Tweet 0
  • Trending
  • Comments
  • Latest
U.S. NAVY MK18 MOD O CUSTOM CLOSE QUARTER COMBAT WEAPON FOR THE SEAFARING SERVICE

U.S. NAVY MK18 MOD O CUSTOM CLOSE QUARTER COMBAT WEAPON FOR THE SEAFARING SERVICE

Recreational Use Of 40MM Grenade Launchers

Recreational Use Of 40MM Grenade Launchers

SIG Spectre Comp with AXG Grip Module

Customizing the Already Custom SIG P320 Spectre Comp

Col. Rex Applegate: The Knife Designs of a Close-Combat Legend

Col. Rex Applegate: The Knife Designs of a Close-Combat Legend

New Review: V19N1

New Review: V23N3

SAR|Special

SAR|Special

The Grand Power Q100

The Grand Power Q100

A Fading Star: The star S135 Submachine Gun, That is

A Fading Star: The star S135 Submachine Gun, That is

The Iron Door: Soviet Russian Weapons Designers Stop the Germans in Their Tracks

The Iron Door: Soviet Russian Weapons Designers Stop the Germans in Their Tracks

The American FN FAL Rifle: In Search of the Perfect Lightweight Rifle

The American FN FAL Rifle: In Search of the Perfect Lightweight Rifle

Ahead of Its Time: British Fosbery Pump-Action Shotgun with “Stoner” Bolt

Ahead of Its Time: British Fosbery Pump-Action Shotgun with “Stoner” Bolt

The Big Bang! : Great American Fun at the 2018 Big Sandy Machine Gun Shoot in Wikieup, AZ

The Big Bang! : Great American Fun at the 2018 Big Sandy Machine Gun Shoot in Wikieup, AZ

QUICK LINKS

  • About Chipotle Publishing
  • About Small Arms Review
  • Advertise with Us
  • Write for Us

CONTACT DETAILS

  • Phone: +1 (702) 565-0746
  • E-mail: office@smallarmsreview.com
  • Web: www.chipotlepublishing.com
  • Chipotle Publishing, LLC 631 N. Stephanie St., No. 282, Henderson, NV 89014
Small Arms Review

FOLLOW US

  • Privacy Policy
  • Disclaimer

© 2022 Chipotle Publishing | All Rights Reserved

No Result
View All Result
  • Home
  • Articles
    • Guns & Parts
    • Suppressors
    • Optics & Thermals
    • Ammunition
    • Gear
    • News & Opinion
    • Columns
    • Museums & Factory Tours
    • ID Guides
    • Interviews
    • Event Coverage
    • Articles by Issue
      • Volume 1
      • Volume 2
      • Volume 3
      • Volume 4
      • Volume 5
      • Volume 6
      • Volume 7
      • Volume 8
      • Volume 9
      • Volume 10
      • Volume 11
      • Volume 12
      • Volume 13
      • Volume 14
      • Volume 15
      • Volume 16
      • Volume 17
      • Volume 18
      • Volume 19
      • Volume 20
      • Volume 21
      • Volume 22
      • Volume 23
      • Volume 24
  • The Archive
    • Search The Archive
  • Store
    • Books
    • Back Issues
    • Merchandise
  • Podcast
  • Newsletter
  • Events
  • FrankenGun Challenge
  • About
    • About Small Arms Review
    • About Chipotle Publishing
    • Contact Us
    • Other Publications
      • Small Arms Defense Journal

© 2022 Chipotle Publishing | All Rights Reserved

Welcome Back!

Login to your account below

Forgotten Password?

Retrieve your password

Please enter your username or email address to reset your password.

Log In

Add New Playlist

This website uses cookies. By continuing to use this website you are giving consent to cookies being used. Visit our Privacy and Cookie Policy.

Subscribe To Our Weekly Newsletter

Are you in the know?
Stay up to date with the latest articles.

Facebook-f Linkedin Instagram

Redirecting to External Website

You are leaving the Small Arms Review website and will be redirected to an external link in a 5 Seconds.
VISIT NOW!